Age | Commit message (Collapse) | Author |
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
This time use the snapshot archives to avoid
repo clone size issues
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
There hasn't been a tagged version of the firmware lately, but there have been
several bugfixes listed in the commit history and we're about to move to v4.14.y
as the default kernel so let's get up-to-date.
The actual commit used is the most recent change to the firmware files as of
2018-02-26, the most recent commits which only change the kernel image and other
files we don't use are ignored.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Forcing hdmi_drive=2 prevents the use of a DVI monitor and a HDMI-DVI converter
cable.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
For raspberrypi3-64 we need to use the Image or Image.gz format with u-boot
instead of the legacy uImage format. We also need to issue the 'booti' command
to boot the kernel instead of 'bootm'.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Use correct overlay for enabled vc4 accelaration
This enable 3D accelaration over dispmanx on vc4/rpi64
Enable audio over HDMI
Disable overscan to avoid graphics glitches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
oe-core now provides v2017.09 of u-boot which already merged both patches
introduced by commit 94e2929f746f7e49a7870f7ea889dcbed05296c7 so we can
drop them from meta-raspberrypi.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
u-boot v2017.07 was not able to boot a Linux kernel or handle keyboard input.
This is fixed by reverting a config change to re-enable CONFIG_OF_EMBED and
backporting another config change to enable CONFIG_DM_KEYBOARD.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
* bitbake is using re.match, so raspberrypi actually matches with anything
^raspberrypi.* which currently works, but it will also match with hypothetical
raspberrypi-is-no-more-this-is-banana-now MACHINE which isn't intended by
this COMPATIBLE_MACHINE.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
This MACHINE_FEATURE will automatically add the recommended
Adafruit configuration line to the Raspberry Pi config.txt.
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Commit da32aac introduced an invalid shell variable name in do_deploy():
according to bash manpage variable names cannot contain dots. Replace
dot with underscore to fix it.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
|
|
Add support for the Waveshare 1024x600 "C" Rev2.1 7" IPS Capacitive Touch
Screen LCD with HDMI interface:
http://www.waveshare.com/7inch-HDMI-LCD-C.htm
http://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
This product works "out of the box" with the Raspberry Pi. Simply connect
the provided HDMI and USB cables between the two devices. The touch<=>mouse
integration works automatically.
Tested with a Raspberry Pi 3, with a 32-bit raspberrypi3 build.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
|
Uses 4.9.13 and has rpi0w support
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Let config.txt explicitly specify it
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
U-boot has been updated to 2017.01 in poky/oe-core which contains these
patches.
Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
|
|
The patch 0003-Include-lowlevel_init.o-for-rpi2.patch does not apply on
2016.11 and causes an build error.
Patch 0002-rpi-passthrough-of-the-firmware-provided-FDT-blob.patch
provides the inclusion of lowlever_init.o.
Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
|
|
A patch is backported to check if the firmware loaded a device tree blob
into memory and set the fdt_addr variable if it is found. The U-Boot
script will then read the command line arguments generated by the
firmware from the device tree and boot the kernel with the command
line arguments and the loaded device tree.
This allows things like MAC address, board revision and serial number
to be correctly configured and options in config.txt to be used.
An additional patch is backported and further changes are made to support
this.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
|
|
The += operator should not be used in combination with overrides as it
will clear any existing values in the variable.
Example:
FOO = "bar"
FOO_rpi += "baz"
The above example would result in FOO being equal to " baz" instead of
"bar baz".
The bbappend is changed to use a wildcard instead of a specific version
to simplify updating U-Boot.
Signed-off-by: Jonathan Liu <net147@gmail.com>
|
|
This is a binary repo and its quite large in size
we do not need the whole history of this repo since
most of stuff needed is binaries, therefore switch
to release tarballs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Fixes issues with display not starting with weston
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The boot.cmd file created by rpi-u-boot-scr is needed for u-boot to
automatically boot a RaspberryPi.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Upstream u-boot searches the boot partition for a script named 'boot.scr'. If
this file exists it is executed as a sequence of u-boot commands in order to
boot the system. This script must be compiled using the mkimage command to
ensure that it is understood by u-boot.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
firmware -> 20160726
userland -> 20160728
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The rpi-mkimage tools are no longer used. Recent Raspberry Pi firmware can
directly boot a Linux kernel image using device tree and mainline u-boot
supports Raspberry Pi without the use of these tools.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
The repository used by u-boot-rpi has not been updated since 2012. In the
meantime, mailine u-boot has gained Raspberry Pi support. All we need to do is
set UBOOT_MACHINE to an appropriate value in the machine config files.
Currently configs are only provided for raspberrypi and raspberrypi2. The master
branch of u-boot now also appears to have a config file for raspberrypi3 so
support for this can be added in the future when u-boot is upgraded in oe-core.
The mainline u-boot recipe creates the file "u-boot.bin" instead of
"u-boot.img".
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Theodor Gherzan <theodor@resin.io>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Theodor Gherzan <theodor@resin.io>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
The support for PiTFT 28 inch resistive touchscreen is optional
and can be enabled by adding below in local.conf:
MACHINE_FEATURES += "pitft pitft28r"
While at it also fix a minor typo in README.
Signed-off-by: Petter Mabäcker <petter@technux.se>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Theodor Gherzan <theodor@resin.io>
|
|
Signed-off-by: Theodor Gherzan <theodor@resin.io>
|
|
- Add support to build overlays for PiTFT22 in the kernel.
- Setup a basic configuration for the driver
The PiTFT22 support is optional and can be enabled by adding below in
local.conf:
MACHINE_FEATURES += "pitft pitft22"
This patch also includes restructuring of kernel patches per kernel version
specific directories.
[Support #70]
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
|
|
On fido and earlier branches, ${libexecdir} depends on ${BPN} so it
is not a good choice as ${libexecdir} is different depending on the
recipe name.
For example, rpi-mkimage would install mkknlimg to:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage
but linux-raspberrypi would look for mkknlimg in the path:
[...]/sysroots/x86_64-linux/usr/lib/linux-raspberrypi
To resolve this, we use ${bindir} instead as it doesn't depend on
${BPN} in fido and earlier branches as well as in the master branch.
Signed-off-by: Jonathan Liu <net147@gmail.com>
|
|
Add basic support for PiTFT display by using device-trees.
In order get it working below configurations must be active in
local.conf:
MACHINE_FEATURES += "pitft"
- This will enable SPI bus and i2c device-trees, it will also setup
framebuffer for console and x server on PiTFT.
[Support #70]
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
With newer kernels (>=3.18) that supports device-trees I2C
should be enabled with device-trees.
This is now support by adding:
ENABLE_I2C = "1"
in local.conf
This will enable the dtparams:
i2c1
i2c_arm
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Document it in README
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
|
|
It doesn't make sense to install to ${libexecdir}/rpi-mkimage as it
changes the path on fido and earlier branches from:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage
to:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage/rpi-mkimage
Using ${libexecdir} instead of ${libexecdir}/rpi-mkimage preserves
the path for fido and earlier.
Signed-off-by: Jonathan Liu <net147@gmail.com>
|