Age | Commit message (Collapse) | Author |
|
good.
Signed-off-by: Thomas Perrot <thomas.perrot@tupi.fr>
(cherry picked from commit c8532df1c2e4812b3520d32ed49be943bea2edd9)
Signed-off-by: Petter Mabäcker <petter@technux.se>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Set a high layer prio to ensure that meta-raspberrypi addons
are always prioritized above the depended layers.
Signed-off-by: Petter Mabäcker <petter@technux.se>
|
|
Reformat the tune-arm1176jzf-s.inc file.
There is not 'PACKAGE_EXTRA_ARCHS_tune-armv6hf-vfp'. Replace it by
'PACKAGE_EXTRA_ARCHS_tune-armv6hf'.
Change-Id: I0dd63b1dd3e1ebc7fe0600e93fb9d27a6a833cd9
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
We already switched to kernel v3.18 by default so we can activate
KERNEL_DEVICETREE by default too.
Change-Id: I69612be72f8254d462421112cf851e17a1ef24f8
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
[Bug #49]
Change-Id: I340b4134ae4227f315c1c3df1345b04ebd4b874b
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Add machine configuration file.
Change the kernel image name on SD card.
Use the defconfig for this machine (bcm2709_defconfig).
Change-Id: I6549d5f49b1ed32ef4d44aca6f7af4234618c1a8
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: I4a55b53d337930aae3351629a902dbac832ac958
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: If3ff46ae10b7bee2decead6dfa408833713d16f8
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
In this way the modifications will be used on all RPI boards.
Change-Id: Ife10db876db85c1c4944028a0b49ccae4d8c0d41
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
*.conf files should hold board specific stuff while rpi-base.inc should
include configuration that is common for all Raspberry Pi boards.
Remove MACHINE_KERNEL_PR as we don't use it anymore.
Minor tweaks.
Change-Id: I5e1b12c1d224ac003d2890544beb036f1d5d8643
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Compile overlay device trees and put them in 'overlays/' folder
on sdcard RPi boot partition.
Change-Id: I3da0032b3c2618165008eec1fc94e97824d09099
Signed-off-by: Francois Muller <francois@concept-embarque.fr>
|
|
[RPi DT info] https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md#part-3-using-device-trees-on-raspberry-pi
RPi bootloader detects a DT-ready kernel by checking for a specific trailer in kernel.img.
Using latest raspberrypi/firmware (firmware.inc) enables this check ability.
Using latest raspberrypi/tools (rpi-mkimage.bb) gives access to mkknlimg for adding the
required trailer to kernel image.
If KERNEL_DEVICETREE is filled in, the trailer is added to the kernel image before
kernel install task. While creating the SDCard image, this modified kernel is
put on boot partition (as kernel.img) as well as DeviceTree blobs (.dtb files).
If KERNEL_DEVICETREE is empty, this new process isn't operated, legacy one does.
KERNEL_DEVICETREE for RPi is really supported only starting from linux-rapsberry 3.18+
kernels, so as for now it defaults to empty (in machine config file).
Change-Id: Ifea71bbda729b8f3c47be7ba0ba03be5ad2ceeaa
Signed-off-by: Francois Muller <francois@concept-embarque.fr>
|
|
Add IMAGE_BOOT_FILES that defines a list of files to be placed in boot
partition. The variable is effectivey used with wic when building a SD
card image.
Change-Id: Ie7b2ea032349bf33ce7a9afc70e2fb4806ff9a04
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Acked-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: Ief7949be4b9726b5b6ba58e6280f6b6ca3fdfdc4
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Use instead, the special created recipe mesa-gl which provides on libgl.
Change-Id: I5ed3c50a0a794f8ea63cc1906f0139ec47459fa6
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
AVAILTUNES"
|
|
* arm1176jzfshf uses -mtune=hard.
* Add -mfpu=vfp if vfp is included in TUNE_FEATURES
Signed-off-by: Kazuya Nishimura <kazuya.nisimura@gmail.com>
Change-Id: If81977cacbba052fa30c4a407ec65e93148d2ee3
|
|
Change-Id: I6019c1ec77ed1ec5c00ab16cb57dd108e2bd5ba8
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: I61c32aa23eef86cb9861776b37c4ecd8f7c8052c
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: Ic537cada66ff09cde592da977a109415e05cb19c
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: Ic7f1faa3ed60a3ccd1b0b08ed366cfb71df06536
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
This is the default/base branch on official github repository:
https://github.com/raspberrypi/linux/branches
Change-Id: I99702ae7548b49a5b4b575b3f02f5a3a48ad347f
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Change-Id: I93ed1832905e4fdfc5f5d387c37933b60a50f4c5
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
From: Philipp Wagner <mail@philipp-wagner.com>
Kernel 3.6 is also the default for Raspbian and thus should be the
most tested version right now.
Change-Id: I03a75fa1be3ab0f8f43fb09a8fff779c6d9100e7
Signed-off-by: Philipp Wagner <mail@philipp-wagner.com>
Signed-off-by: Alexandru Niculita <alexnick87@gmail.com>
|
|
We do this because the recipe was removed. Check:
commit 808f5e54f8c9799de39436601b9b8474de3bb323
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Instead of overriding the default psplash image, the raspberrypi image is added
as an additional image. It is then set as the default in the raspberrypi machine
config file so that other targets do not pick up our splash image.
Tested on raspberrpi and qemuarm: on raspberrypi I see to Raspberry Pi logo, on
qemuarm I see the Yocto Project logo.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
There are no libgl binary shipped in raspberrypi firmware repo.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
after meta-systemd commit [1] the following error was thrown during parsing:
ERROR: Unable to parse /home/Superandy/data/oe-core/sources/meta-raspberrypi/conf/layer.conf:
Failure expanding variable BBFILES, expression was
...
which triggered exception NameError: name 'base_contains' is not defined
[1] http://cgit.openembedded.org/meta-openembedded/commit/?id=3c21a46020bd0816579648f684c41dbd6333583e
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
* without this tune-xscale and tune-arm926ejs were both creating
packages in armv5te feed, but each with different -mtune, with
OEBasicHash enabled it was causing each package to rebuild with new
-mtune after MACHINE switch, but that doesn't make sense with output
stored in the same armv5te feed
* this makes different feed for each -mtune, but more generic one to be
selected with DEFAULTTUNE
* tune-iwmmxt and tune-ep9312 were already using this, just move it
bellow AVAILTUNES and use ARMPKGARCH_tune-foo syntax
* tune-cortexr4 and tune-cortexm3 are using armv7r/armv7m as ARMPKGARCH
because there isn't another tune to use the same -march
(From OE-Core rev: cffda9a821a3b83a8529d643c567859e091c6846)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
* this is mostly for backwards compatibility and to share binary feed
like it was before, but now without missing different -mtune in it
* if you want to build some package with -mtune add something like this
to your distro config
DEFAULTTUNE_qemuarm_pn-openssl = "arm926ejs"
DEFAULTTUNE_qemuarmx_pn-openssl = "xscale"
be aware that if you do this you should do it also for all packages
which depends on openssl because if you dont and you build e.g. dhcp,
then dhcp build for arm926ejs (even with DEFAULTTUNE armv5te) will
depend on openssl with arm926ejs, so dhcp in armv5te feed will be
rebuild after each MACHINE switch.
* cortexm3, cortexr4, iwmmx and ep9312 are using own DEFAULTTUNE because
they define also different -march
* shared feeds are
armv4t: arm920t, arm9tdmi
armv5te: arm926ejs, xscale
armv7a-neon: cortexa8, cortexa9
(From OE-Core rev: a11bdc36a1be18cc5aa14682b2a2c9ee83141f51)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
We use now the latest one from meta-openembedded.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
We don't use this anymore as the memory split is now done from config.txt.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
It makes no sense to have distro related configurations in a BSP
layer. So let's have these common parts (provides, version etc)
in machine directory instead.
[GITHUB #73]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
All PREFERRED_* variables were moved to an .inc file to have variables
clearer.
Inherit .inc files and remove PREFERRED_* variables.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
TARGET_ARCH by default is TUNE_ARCH which is already arm. So this line
is useless.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
This variable was dropped:
commit 0504d36646f8def4829250a9eee0cf9bac3b756e
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Tue May 10 16:19:02 2011 +0100
bitbake.conf: Drop unused *GUI* and MACHINE_DISPLAY variables
(From OE-Core rev: baf136a9c95a94c5bf89c9a818960d616439682c)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
We added distro file for having BBMASK and thought this would be a good
place to hold some other distro variables. Obviously the only needed
variable was BBMASK after all, so a cleaner way would be to instruct
users to add BBMASK to local.conf
[GITHUB #57]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
It seems like rpi kernel doesn't work well with newer udev version so
we set 164 as preferred version for it.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
We will use this package from meta-oe. libav is a dependency for
omxplayer.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
These variables are weakly assigned to let user overwrite them.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|