Age | Commit message (Collapse) | Author |
|
Since we enabled vc4graphics by default[1], there is no easy way to disable
it if needed. This patch introduces a variable (DISABLE_VC4GRAPHICS)
which when set to '1' will not add 'vc4graphics' to MACHINE_FEATURES
forcing the old behaviour.
One could use it in 'local.conf' for example.
[1] https://github.com/agherzan/meta-raspberrypi/pull/417
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
As of late[1], we defaulted to enabling vc4graphics in MACHINE_FEATURES.
Let's cleanup the machine configurations as per this change.
[1] https://github.com/agherzan/meta-raspberrypi/pull/417
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
The PCIe bounce buffers were ported[1] in the kernel so we can remove
this limitation now.
[1] https://github.com/raspberrypi/linux/pull/3144
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
The PCI controller on the Raspberry Pi 4 acts as a DMA controller and can
only address the first 3Gb[1] of the memory space. On 32bit this was
addressed by implementing bouncing buffers[2] but this currently has no
support for arm64. In order to have working USB, as a workaround, we
limit the ram to 3G.
Fixes #446
[1] https://github.com/raspberrypi/linux/issues/3093
[2] https://github.com/raspberrypi/linux/blob/rpi-4.19.y/drivers/pci/controller/pcie-brcmstb-bounce.c
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Vc4graphics enables drm backend on wayland Compositor (weston & westeros)
Appending vc4graphics machine feature to use mesa drivers for OpenGL and
V4l2 for video.
Signed-off-by: Riyaz <Riyaz.l@ltts.com>
|
|
We can do this because the kernel now includes a workaround for the DMA
issue.
https://github.com/raspberrypi/linux/pull/3080
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
We drop armstub configuration because the new firmware includes them.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Currently, we use vc4-kms-v3d as the default overlay for VC4 but this
seems to break vc4 at runtime on RPi4. Change this to vc4-fkms-v3d for
now as this is the default Raspbian ons as well.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
This change is following the rename in the kernel:
commit 6f91b5dbfdb62a434571a73f2dc15181963e3bea
Author: Phil Elwell <phil@raspberrypi.org>
Date: Tue May 28 16:36:04 2019 +0100
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
4.19 is now declared stable, see
https://github.com/raspberrypi/linux/issues/2931#issuecomment-494016355
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The 4.19.y kernel is not yet considered stable upstream as discussed in
the following GitHub issues:
https://github.com/agherzan/meta-raspberrypi/issues/410
https://github.com/raspberrypi/linux/issues/2931
Signed-off-by: Paul Barker <paul@betafive.co.uk>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
kernel 4.19 does not have this overlay
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
As well, define the correct configuration for this machine.
Tested this with and without u-boot on CM3 (with internal storage) and
CM3+ without internal storage.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
rpi3 is based on cortex-a53 implementation which is armv8+crc+simd
now that OE-Core has the appropriate tunes, switch to using the new
tune file, bonus, is that chromium will be more optimized now
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This is to be consistent with the latest OE.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
|
|
In order to make Pican 2 work, we :
- add mcp2515.dto to the overlay list
- add a variable to enable it in local.conf
- create a udev rule to mount interface
http://skpang.co.uk/catalog/pican2-canbus-board-for-raspberry-pi-23-p-1475.html
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
|
|
Raspberry Pi hardware requires firmware that supersedes or is not
present in the standard linux-firmware distribution. These files are
maintained in the RPi-Distro project on github.
Several attempts have been made to reconcile conflicts between what's in
linux-firmware and what the hardware needs. The existing approach is
functional but not maintainable since it combines material from three
repositories into a single package that claims to be linux-firmware.
Remove the appends that change the content of linux-firmware for rpi
hardware. Add two new recipes that follow the RPi-Distro repositories:
* firmware-nonfree which forked from linux-firmware and replaces
content is provided as linux-firmware-rpidistro;
* bluez-firmware which forked from (very old) bluez and adds content is
provided as bluez-firmware-rpidistro.
The packages are named to make clear that these come from RPi-Distro,
rather than generic sources. Licensing attempts to record the state of
licensing as documented in RPi-Distro.
Resolves: #298
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
setting cma is not required with latest vc4 driver
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
From the documentation:
SERIAL_CONSOLES - Provide a value that specifies the baud rate followed by
the TTY device name separated by a semicolon. Use spaces to separate
multiple devices
Fixes build error of `systemd-serialgetty` after recent commit 8218bec.
See: <https://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-SERIAL_CONSOLES>
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
|
|
Fix #302
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
This is helpful for example in the cases where the kernel doesn't
provide all the dtbs in arm64 as in arm.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
[Issue #285] -- https://github.com/agherzan/meta-raspberrypi/issues/285
The openembedded-core commit 1860d9d3c62e2e94cd68a809385873ffd8270b6d
changed the names of DTB files in the deploy directory - they are no
longer prefixed with "${KERNEL_IMAGETYPE}-". Update make_dtb_boot_files
(which generates entries in IMAGE_BOOT_FILES) to take this change into
account.
Signed-off-by: Jonathan Haigh <jonathan.haigh@arm.com>
|
|
Add the CM3 dtb in the boot partition so we can boot this board as well with
this machine.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
The CM3 module is based Raspberry Pi 3 not 2.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Controlled with ENABLE_AT86RF variable
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
|
|
Closes #253
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
The attempt to Raspbian updated firmware blobs in packages separate from
linux-firmware introduced unresolvable conflicts with the standard
linux-firmware roll-up package. Revert to using an augmented
linux-firmware recipe that overrides and adds firmware from two Raspbian
repositories that have up-to-date images.
Closes #244
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
This along with some module and connman magic allows a RaspberryPi Zero
Wireless to tether to a host over USB.
dtoverlay=dwc2,dr_mode=peripheral
modprobe g_ether
connman enable gadget
connman tether gadget on
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
While wic is not a standard image, adding it to IMAGE_FSTYPES in
local.conf will fail unless a WKS_FILE is provided.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
This matches the change made in the upstream firmware repository earlier in
February.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
The dependency resolution code in bitbake has recently been optimized and this
seems to have slightly changed the behaviour of do_image_rpi_sdimg and
do_image_wic. We ensure that the main build artifacts are present by depending
on the relevant do_deploy and do_populate_sysroot tasks. However, we need to
ensure that other build tasks for these dependencies have also been executed
before we try to create our image. This can be achieved by adding a recursive
dependency on do_build, so that the do_build tasks of all recipes in the
dependency chain of do_image_rpi_sdimg/do_image_wic are executed before the
image function itself is executed.
The original issue seen here was that 'recipedata' files were not copied to
'tmp/deploy/licenses' as do_populate_lic for each dependency had not been ran
before the image creation function. The write_deploy_manifest function from
license.bbclass (listed in IMAGE_POSTPROCESS_COMMAND) therefore failed. Adding
the recursive dependency on do_build fixes this issue, ensuring do_populate_lic
runs before do_image_rpi_sdimg/do_image_wic.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|