aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-09-18sdcard_image-rpi: Ship config.txt from RPi-config recipeAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-18bcm2835-bootfiles: Add rdepends to RPi-configAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-18RPi-config: Create recipe for config.txt fileAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-18linux-raspberrypi: Update SRCREV to current@2012-09-13Sander van Grieken
Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl>
2012-09-18vc-graphics.inc: Fix QA issue; Install libGLESv1_CM.so symlink in source as copySander van Grieken
Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl>
2012-09-18firmware.inc: Update firmware SRCREV to current@2012-09-13Sander van Grieken
Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl>
2012-09-18Move fsl-default*.inc from distro to machineAndrei Gherzan
It makes no sense to have distro related configurations in a BSP layer. So let's have these common parts (provides, version etc) in machine directory instead. [GITHUB #73] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-18sdcard_image-rpi: Fix xzcat command while writing rootfs partitionAndrei Gherzan
[GITHUB #74] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16sdcard_image-rpi: Ship cmdline.txt fileAndrei Gherzan
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16linux-raspberrypi: Use cmdline.txt to supply kernel command lineAndrei Gherzan
The build-time kernel command line (as defined by the CONFIG_CMDLINE config parameter) is not respected by the RPI bootloader, and instead any custom command line must be suplied via the cmdline.txt file in the boot partition. This patch modifies the linux-raspberrypi recipe to generate a cmdline.txt file that corresponds to the build-time configured command line, and it also modifies the sdcard_image-rpi.bbclass to include this file in the generated SD card images. [GITHUB #62] Signed-off-by: Tomas Frydrych <tomas@sleepfive.com> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16vchiq: Fix file permissionAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16recipes.txt: Fix file permissionAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16linux-raspberrypi_3.2.27.bb: Fix file permissionAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16linux.inc: Fix file permissionAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16raspberrypi.conf: Fix file permissionsAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16bcm2835-bootfiles.bb: Fix file permissionsAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16firmware.inc: Remove extra newlinesAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16rpi-first-run-wizard: Clean extra spacesAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16recipes.txt: Add info about devtools and multimedia recipes groupsAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16bcm2835: Add COMPATIBLE_MACHINEAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16rpi-default-settings.inc: Add sdcard_image-rpi to IMAGE_CLASSESAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16sdcard_image-rpi.bbclass: Inherit image_types as this class will be in ↵Andrei Gherzan
IMAGE_CLASSES Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16raspberrypi.conf: Drop INHERIT sdcard_image-rpi as we will use IMAGE_CLASSESAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16rpi-default-*.inc: Create inc files included in machine configure fileAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16raspberrypi.conf: Remove PREFERRED_* and include rpi-default*.incAndrei Gherzan
All PREFERRED_* variables were moved to an .inc file to have variables clearer. Inherit .inc files and remove PREFERRED_* variables. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16linux-raspberrypi: Remove PR from PVAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16README: Move RPI_GPU_FIRMWARE instructions to READMEAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16raspberrypi.conf: Remove TARGET_ARCH variableAndrei Gherzan
TARGET_ARCH by default is TUNE_ARCH which is already arm. So this line is useless. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16raspberrypi.conf: Remove GUI_MACHINE_CLASS variableAndrei Gherzan
This variable was dropped: commit 0504d36646f8def4829250a9eee0cf9bac3b756e Author: Richard Purdie <richard.purdie@linuxfoundation.org> Date: Tue May 10 16:19:02 2011 +0100 bitbake.conf: Drop unused *GUI* and MACHINE_DISPLAY variables (From OE-Core rev: baf136a9c95a94c5bf89c9a818960d616439682c) Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-16sdcard_image-rpi: Fix SDIMG_SIZEAndrei Gherzan
The final SDIMG_SIZE was missing a IMAGE_ROOTFS_ALIGNMENT padding. [GITHUB #65] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-12sdcard_image-rpi: Align SD partition and optimize final SD imageAndrei Gherzan
SD image file was 4G in size but actually the rootfs partition was only 60MB (ex.: rpi-basic-image). The image file size is not fixed anymore but calculated inside this class. In this way we will setup the partition for rootfs to fit the ext file used as SDIMG_ROOTFS. By default the free space is calculated with IMAGE_OVERHEAD_FACTOR which is by default 1.3. If more free space is needed this can be overwritten. IMAGE_ROOTFS_ALIGNMENT set at 4096. This should be the best value for a SD card. [GITHUB #20] [GITHUB #59] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-06sdcard_image-rpi.bbclass: Add sysctl.d config to set vm.min_free_kbytes to 8192Sander van Grieken
[GITHUB #49] Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-06bcm2835: Integrate version 1.8Aurelian Zanoschi
The first integration of bcm2835 package was done. The package version is 1.8. BCM2835 package provides access to GPIO and other IO functions on the Broadcom BCM 2835 chip, allowing access to the GPIO pins on the 26 pin IDE plug on the RPi board. [GITHUB #35] Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-06README: Instruct users to add BBMASK as distro file was removedAndrei Gherzan
[GITHUB #57] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-06poky-raspberrypi.conf: Remove distro fileAndrei Gherzan
We added distro file for having BBMASK and thought this would be a good place to hold some other distro variables. Obviously the only needed variable was BBMASK after all, so a cleaner way would be to instruct users to add BBMASK to local.conf [GITHUB #57] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-09-03rpi-basic-image: Add new basic image with SSH serverJack Mitchell
Add a new basic image with ssh-server-dropbear IMAGE_FEATURE This is to allow people without physical hardware attached to the Pi such as monitor and keyboard to connect over the network. [GITHUB #52] Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-31poky-raspberrypi.conf: Weakly assign BBMASKAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29raspberrypi.conf: Set udev PREFERRED_VERSION to 164Andrei Gherzan
It seems like rpi kernel doesn't work well with newer udev version so we set 164 as preferred version for it. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29omxplayer: Integrate git revision 231c08b42005e3de565013bc1cee18bd5a349c1fAndrei Gherzan
Add four patches: 1. don-t-strip-while-installing.patch Don't strip binaries because buildsystem will strip them after all. 2. libraries-are-installed-in-usr-lib.patch Libraries are installed in /usr/lib not in /usr/local/lib 3, remove-hardcoded-directory-omxplayer-dist.patch We want files to be installed in ${D}. Add a variable in Makefile to let users install omxplayer in a specific location. 4. remove-makefile-include.patch Remove Makefile.include as it includes hardcoded paths. Rely on variables provided by build system. [GITHUB #34] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29vc-graphics.inc: New provides, compatible machine and init for vchiqAndrei Gherzan
1. Add COMPATIBLE_MACHINE=raspberrypi. 2. This package provides libgl libgles2 and libegl. Add these to PROVIDES. 3. Add an init script to create vchiq device node while booting. This device is needed by vc_tvservice_*. Package this init script in ${PN}. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29poky-raspberrypi.conf: Remove libav from BBMASKAndrei Gherzan
We will use this package from meta-oe. libav is a dependency for omxplayer. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29README: Instruct users to add meta-oe layer to bblayers.confAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29bcm2835-bootfiles.bb: Add COMPATIBLE_MACHINEAndrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29vc-graphics.bb: Change bb file mode to 644Andrei Gherzan
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29raspberrypi.conf: Set PREFERRED_PROVIDER for egl, libgles2 and glAndrei Gherzan
These variables are weakly assigned to let user overwrite them. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29RPI.GPIO: Integrate v0.2.0Andrei Gherzan
Patch was added to use setuptools that we already have integrated in yocto and not the one provided in package. In his way we can use setuptools bbclass. [GITHUB #36] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-29sdcard_image-rpi.bbclass: Add support for 240M/16M GPU memory splitSander van Grieken
Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl>
2012-08-28README: Add instructions for compressed deployed filesAndrei Gherzan
[GITHUB #39] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-28sdcard_image-rpi: Use xzcat if SDIMG_ROOTFS_TYPE is a .xz fileAndrei Gherzan
When burning the rootfs partition we use dd if rootfs file is not compressed and xzcat piped with dd if rootfs file is a .xz file. [GITHUB #39] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
2012-08-28raspberrypi.conf: Weakly assign IMAGE_FSTYPES to let users overwriteAndrei Gherzan
[GITHUB #39] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>