aboutsummaryrefslogtreecommitdiffstats
path: root/conf
AgeCommit message (Collapse)Author
2021-09-07conf/machine: Add initial support for SA8155P-ADP boardBhupesh Sharma
Add configuration files for SA8155P-ADP board which uses the SM8150 SoC. Here we create an include (.inc) file and a configuration (.conf) file for the adp board. This board doesn't support graphics / display (at least for now). Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> (cherry picked from commit bbadb282bbb4f1731d94a67b66563bc3c4e2f73b) [ Removed the armv8.2a tunes not available in dunfell, use default tunes on dunfell like other machines ] Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2021-08-26qcom-armv8a.conf: use linux-firmware packagesDmitry Baryshkov
Use packages generated from linux-firmware to provide Adreno, DSP and VPU firmware for the qrb5165-rb5 board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 056e15af84afe06a2702c37724b3deec51557082)
2021-08-26qrb5165-rb5.conf: use linux-firmware packagesDmitry Baryshkov
Use packages generated from linux-firmware to provide Adreno, DSP and VPU firmware. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit d0b6fc2a248d5181358721608eb05e44d522683d)
2021-07-22conf/machine: Set default SERIAL_CONSOLES in qcom-common.incAníbal Limón
The SERIAL_CONSOLES var is used inside systemd-serialgetty.bb to generate systemd unit to get console after boot, this fix no console in DB845c. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 40ae8d5b56422ef440b603d2e6713d8b577138ab) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2021-07-09qrb5165-rb5: drop lt9611uxc-upgradeDmitry Baryshkov
Stop installing lt9611uxc-upgrade package, it was found to be confusing to users. It will be replaced by the notice in the release notes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 5e9229341beedfe19de450c924275387b76616b7)
2021-05-27conf/machine: Add linux-firmware-qca for dragonboard-820cAníbal Limón
To install qca/nvm_00440302.bin required for bluetooth. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit ddbc7333df9afef51ce0f8eed0689de657359460) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2021-04-13qcom-armv8a: remove rootfs overrides for rb5Dmitry Baryshkov
Since RB5 switched to /dev/sda1 as rootfs, drop separate overrides for QCOM_BOOTIMG_ROOTFS. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit c88a593015c815f23bdeb05959c5197d204a528e)
2021-04-09qcom-armv8a.conf: define per-dtb machine parametersDmitry Baryshkov
Define kernel/machine parameters specific to each device tree blob. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 9d732a7b5ef4819049e23c602dc1595c361548bf)
2021-04-09conf/machine/include/*: switch QCOM_BOOTIMG_PAGE_SIZE defaultDmitry Baryshkov
Newer Qualcomm machines default to QCOM_BOOTIMG_PAGE_SIZE being 4096. Change default from 2048 to 4096 and update machine config files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 67aa26f6d25a820e948cc3429c8c2c2df5f6a107)
2021-04-09linux-qcom-bootimg: move machine-specific KERNEL_CMDLINE to conf fileDmitry Baryshkov
Move machine-specific KERNEL_CMDLINE append to machine (db845c) config file. Include file should not contain machine-specific settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 962c9c04f3a30885c5868cd73a8f026bd2b8f5da)
2021-04-09conf/machine: Add qcom-armv8a MACHINEAníbal Limón
This new MACHINE is target to build multiple Android boot images (boards) and use a common rootfs/userspace filesystem. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> [DB: Add RB5 support] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit ed75ecefa705e32f60a6e656c54caf675b516244)
2021-04-09qrb5165-rb5: support both DVT and PVT devicetreesDmitry Baryshkov
rb5 dvt slightly differs from the production board, so support both DVT and PVT device trees. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit b3e8968aaf4ce89225b41dc4df0c5263a5c21df0)
2021-04-01qrb5165-rb5: use new rootfs partitionDmitry Baryshkov
Latest RB5 bootloader package provides updated partition scheme. It removes Android partitions and adds single rootfs partition at /dev/sda1. Switch to new rootfs partition. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 7b577f612750f1448e1b8250cf24782f933a9883)
2021-02-11qrb5165-rb5: include lt9611uxc-upgrade packageDmitry Baryshkov
Add lt9611uxc-upgrade recipe to autoupdate DSI-to-HDMI bridge firmware. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 7ba99d4acac83c04d4298b31ba263232ad65d80c)
2021-01-28qcom-common.inc: use android-tools-conf-configfs for adbdDmitry Baryshkov
Select android-tools-conf-configfs as PREFERRED_PROVIDER for android-tools-conf, so that adbd startup scripts will use it for device configuration. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 622e55961a65fa4007e844048e71349d659b60cb)
2021-01-28conf/layer.conf: support backports in dynamic-layersDmitry Baryshkov
Add support for meta-backports extension using BBFILES_DYNAMIC. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2021-01-05qrb5165-rb5.conf: add wireless-regdb-static to RRECOMMENDSDmitry Baryshkov
The ath11k driver fails to start the device properly if regdb can not be loaded. Add wireless-regdb-static to MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if wifi is enabled in DISTRO_FEATURES to make sure all images are able to bootstrap the onboard QCA6390 (ath11k) device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit ae9f6a185260d62f1ec9a7b944f5ccaf9357bab3) Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2020-12-23qrb5165-rb5.conf: enable linux-firmware-lt9611uxcDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 78d549d0f0f4497df9b9b59bf06dfbcf6fcd986e)
2020-12-20qrb5165-rb5: install linux-firmware-ath11k if wifi is enabledDmitry Baryshkov
Install linux-firmware-ath11k package if DISTRO_FEATURES contains wifi. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 9f710d06bcf1cfe720d64d98ddf016f83e023c51)
2020-12-01qrb5165-rb5.conf: switch to using PARTLABEL=userdata for rootfsDmitry Baryshkov
RB5 developers have changed partitioning scheme somewhere in the middle of development cycle. Earlier firmware puts userdata partition at /dev/sda8, while later firmware puts it at /dev/sda6. In order to properly support all firmware releases use PARTLABEL=userdata as rootfs specifier on RB5. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 5cdb497e1b993a72b2ffe1e651780ebcd931f061)
2020-12-01conf/machine/*.conf: specify full rootfs device pathDmitry Baryshkov
In preparation to allowing rootfs specifications other than just a device node, move '/dev/' prefix from linux-qcom-bootimg.inc to individual machine config files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 2a7b633ebe3af248febaf51bdfdd58c3489df18b)
2020-11-27qcom-common.conf: add qcom to SOC_FAMILYDmitry Baryshkov
Add 'qcom' to SOC_FAMILY variable to let recipes use generic 'qcom' override. This makes adding support for newer machines/families error prone, since we can enable all BSP patches/features for all families without having to list them one by one. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit c562d92527e419eb31d73672165b2040f30ccb51)
2020-11-27conf/machine: Add qcom-common.inc to avoid duplicate settingsAníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 03f7b6251688bc90df5aea2511aa888857e86256)
2020-10-01qrb5165-rb5: Correct userdata partition on RB5Dmitry Baryshkov
Now let's get it right. Userdata partition on RB5 is sda8, not sda6. sda6 is system_a: 1 6 7 8.0 KiB A02C ssd 2 8 8199 32.0 MiB A026 persist 3 8200 8455 1024.0 KiB A01F misc 4 8456 8583 512.0 KiB A02D keystore 5 8584 8711 512.0 KiB FFFF frp 6 8712 8397319 32.0 GiB A038 system_a 7 8397320 16785927 32.0 GiB FFFF system_b 8 16785928 29595642 48.9 GiB A03A userdata Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 7b01658895cb06e9c96dea674ec05554c8046724)
2020-10-01qrb5165-rb5: correct rootfs (userdata) partitionDmitry Baryshkov
QRB5165 RB5 machine config lists sda15 as rootfs, which is C&P from SM8250-MTP. Use sda6 as rootfs (which is proper userdata on RB5). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit fce09f88d5ec3ef9e60bc0a34258e59088687a52)
2020-10-01qrb5165-rb5: enable firmware packageDmitry Baryshkov
Add firmware package to RRECOMMENDS so it is pulled if firmware files are provided at the build time. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 0a7307b688a3873dd1c0350524721958584f68a7)
2020-09-03Use venus 5.2 from linux-firmware for DB845c.Aníbal Limón
A fix was add on mainline to support linux-firmware binary, https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/commit/?h=release/qcomlt-5.7&id=21bb88052948b35bdce926f301f2ba7970040812 Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit a7e813892860991a6ff012ecd4ac34cfdf6d3eac) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-07-06qrb5165-rb5: add machine config file for Qualcomm RB5 platformDmitry Baryshkov
Add config file for Qcualcomm RB5 Robotics platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit eafc4117ac6adc2c8878fccb4ad6ce93ad282714) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-07-06sm8250-mtp.conf: add initial support for SM8250-MTP boardDmitry Baryshkov
Add configuration files for SM8250 SoC and SM8250-MTP board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (cherry picked from commit 950b668c01ef08b032ad1255d97f26d96ad326d0) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-06-08dragonboard-845c: Switch to use linux-firmware-{ath10k, qcom-{sdm845, ↵Aníbal Limón
adreno-a630}} The bdwlan is needed to generate board-2.bin not useful alone, the same for wlan parts that are now in linux-firmware-qcom-sdm845-modem. Finally install a630_zap*.* firmware inside /lib/firmware/qcom the remaining parts are now on linux-firmware-qcom-adreno-a630. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 07fceedf0c24f3953a29838c2a4b6255b0fdf6a7) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-06-08dragonboard-820c: Switch to use linux-firmware-qcom-{adreno-a530,venus-4.2}Aníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 6d7bf0e2a1f9097d997b823fead70e972a5bf798) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-06-08dragonboard-410c: Switch to use linux-firmware-qcom-{adreno-a3xx,venus-1.8}Aníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 65be9bd6a5fa96dd4ee441901b1fa464b72dfc98) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-04-24layer.conf: remove old branches from LAYERSERIES_COMPATNicolas Dechesne
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2020-03-24layer.conf: Mark it dunfell (3.1) compatibleKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2020-03-21initramfs-test-image: use dynamic_layer for utilities not in OE CoreNicolas Dechesne
Some tools we have in initramfs-test-image are not in OE Core. So instead split the list and use dynamic-layer to include them only when their respective layers are also globally used. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2020-03-20qcom-{apq8016,apq8096,sdm845}: Add fastrpc via MACHINE_EXTRA_RRECOMMENDSAníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-03-11recipes-support: Remove deprecated adsprpcAníbal Limón
Remove installation in SDM845 machine too. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-02-04Remove wcnss-config recipe in dragonboard-410c and sd-600evalAníbal Limón
This configuration recipe for wireless and bluetooth is deprecated now remoteproc start is handled by rmtfs. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2020-02-04conf/machine: Remove blacklist qcom_q6v5_pil of in apq8016Aníbal Limón
This module changed name to qcom_q6v5_mss and the blacklist isn't needed since 5.4 because rmtfs support start of the DSP. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2019-12-02conf/machine: Update rootfs partition in dragonboard-410cAníbal Limón
New bootloader comes with new partitions to store rmtfs firmware [1]. [1] https://git.linaro.org/landing-teams/working/qualcomm/db-boot-tools.git/commit/?id=04008fd6570b566041e6ded5df738068416607e3 Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2019-11-28machine: Add support for QCS404 based EVB 4K platformKhasim Syed Mohammed
EVB4K is a Qcom platform based on QCS404 based SOC. This patch adds basic support. Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
2019-11-28layer.conf: remove old versions from LAYERSERIES_COMPATNicolas Dechesne
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2019-11-28conf/machine/include/qcom-sdm845.inc: Add pd-mapper and tqftpserv for wifiAníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 4104edfac56853022e6baddf8d4575691108f869) (cherry picked from commit 6e47457290b5e5f755b3f6d6022037a2e31a7a3a)
2019-10-28conf/machine/dragonboard-845c.conf: Add linux-firmware-qcaAníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2019-10-08layer: Add zeus to compatible releaseKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-08-23conf/machine: Add rmtfs and adsprpc in sdm845Julien Massot
(cherry picked from commit d5865c8a4e36cfd7ee8487ccea6b21f3f800208f)
2019-08-19Change references from qrtr-apps to qrtr.Aníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 3beeac3a60809607e02f1ff0826b1b86331ab00d)
2019-07-15conf/machine: Add qrtr-apps in sdm845Aníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 423138084e817a82d4e87ce7dbc146fc27114837)
2019-07-03dragonboard-845c: Add firmware recipeAníbal Limón
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2019-06-27draonboard845c: switch default rootfs on /dev/sda1Nicolas Dechesne
New bootloader package is now available from Linaro, and the default ptable is to leave /dev/sda (e.g. LUN0 or HLOS LUN) with a single partition that occupies the entire space. The default name for this partition is 'rootfs'. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-06 07:26:14 +0000