| Age | Commit message (Collapse) | Author |
|---|
|
This patch essentially adds a new EMGD-capable 'fri2' machine to
meta-fri2.
The current version with vesa graphics will become fri2-noemgd; fri2
will become the version with EMGD graphics. This patch does the
fri2->fri2-noemgd renaming and adds the new files for fri2, and
updates the necessary .bbappends to support both fri2 and fri2-noemgd.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update to the ced-generated xorg.conf for 1.8.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Change preferred version of emgd binaries to 1.8.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This adds a new recipe for the emgd 1.8 driver binaries.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Switch crownbay and crownbay-noemgd to the 3.0 kernel, lock it down,
and update kernel SRCREVs.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Call this layer whatever you want, but when enabled it turns on BSP configuration
items specific to autobuild/official binary images. Once this is enabled the uptime
of any BSP will be limted to the value in the .cfg. It is currently at 2 minutes
as an example, but it should be extended to a number of days going forward.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
meta-tlk: Rename and changed to 10 day limit
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The parted 3.0 release introduced some API changes such as the removal
of mkpartfs. This updates init-install.sh to use mkpart instead.
Fixes [YOCTO #1387]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Change PREFERRED_VERSION_linux-yocto to a form that will pick up the
new numbering scheme.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Fixes [YOCTO 1353]
The meta-yocto atom-pc is a more generic BSP than is needed
for the Intel n450. Decouple the n450.conf from the meta-yocto atom-pc.conf.
Add a linux-yocto_3.0.bbappend recipe.
In the process:
o remove MACHINE_FEATURES wifi and add serial
o specify linux-yocto version 3.0
o specify linux-libc-headers-yocto
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Update 3.0 kernel SRCREVs for fishriver, fri2, jasperforest, sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
As the all the BSPs use the same BSP branch and meta commit ID as the base
recipe, there is no need specify the KBRANCH and SRCREVs. Not doing so
greatly simplifies maintenance. Leaving the syntax in place, but commented
out, serves as documentation should the need arise to use a different BSP
branch or meta commit ID.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Allow users or layers to override PREFERRED_PROVIDER_virtual/kernel.
This is required to use the linux-yocto-rt kernel, for example.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
All the BSPs build out of the preempt-rt/base branch (rather than a
preempt-rt/$MACHINE branch), so separate KMACHINE and KBRANCH assignments are
required for each BSP.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Switch fishriver to the 3.0 kernel, lock it down, and update kernel
SRCREVs.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Most of the time, we want a -live image, so add it to the
IMAGE_FSTYPES by default.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
These are all now handled or obsoleted by tune-atom.inc, so remove
them here.
|
|
Most of the time, we want a -live image, so add it to the
IMAGE_FSTYPES by default.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
These are all now handled or obsoleted by tune-atom.inc, so remove
them here.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Most of the time, we want a -live image, so add it to the
IMAGE_FSTYPES by default.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Most of the time, we want a -live image, so add it to the
IMAGE_FSTYPES by default.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Require the tune file for x86_64, then TARGET_ARCH and TARGET_CC_ARCH
are set already. Also remove superfluous "xeon" package architecture
that doesn't do anything.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Require the tune file for x86_64, then TARGET_ARCH and TARGET_CC_ARCH
are set already. Also remove superfluous "snb" package architecture that
doesn't do anything.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
remove recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin, since it's
no longer used.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Most of the time, we want a -live image, so add it to the
IMAGE_FSTYPES by default.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
These are all now handled or obsoleted by tune-atom.inc, so remove
them here.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Make sure the 3g and wifi bits get added.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This layer provides support for E6XX + EG20T Intel systems.
Currently it supports only vesa graphics, which will be upgraded
shortly.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The BBFILES append in crownbay's layer.conf is too broad and causes
the wrong init-install.sh to be picked up, causing a bad grub install.
Narrow down the BBFILES to include only what is actually needed.
Fixes [YOCTO #1257].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Switch sugarbay to the 3.0 kernel, lock it down, and update kernel
SRCREVs.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Switch jasperforest to the 3.0 kernel, lock it down, and update kernel
SRCREVs.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
AIGLX wasn't finding a couple libraries, causing errors such as Yocto
bug #1235 - 'Running glxinfo and glxgears commands failed.'. This
provides symlinks allowing it to find the needed libraries.
Fixes [YOCTO #1235]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
This allows meta-intel sub-layers to coexist with meta-yocto when building
formfactor for different machines with the same layer setup.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The linux-yocto recipes have been renamed to include explicit
version numbers. The meta-intel bbappends must be updated to
follow the new naming convention.
As a consequence of the recipe renames any SRCREV specificiations
that were part of a machine.conf have been moved to the corresponding
bbappend file. This allows the 2.6.34 and 2.6.37 SRCREVs to co-exist.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Minor whitespace cleanup.
Remove inadvertant? linux-libc-headers provider change.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Add information on the dependencies needed to use the meta-n450 layer.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add systemtap to task-core-tools-profile for crownbay,
crownbay-noemgd, fishriver, jasperforest, n450, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Fixes for extra page compile error (commit bec3f1e8c075) now pulled in
to these branches.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
To avoid extra page compile error until commit bec3f1e8c075 can be
pulled in to these branches.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The fishriver BSP was borrowing a few things from crownbay, but now
has its own branch, so remove the crownbay-specific items.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
For crownbay, crownbay-noemgd, emenlow, fishriver, jasperforest, and
sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
* We can't use machine overrides in layer.conf because MACHINE is not
defined yet (local.conf has not yet been parsed) so remove these
* In light of the above having a separate collection configured for
crownbay-noemgd no longer does anything, so remove it as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Qt 4.6.3 and Clutter 1.4 have been removed from oe-core / poky.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
EMGD 1.6 added a new non-clickthrough Linux tarball download; this
changes the README to make use of it and also updates new directory
naming, etc.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
With the emgd 1.6 upgrade, we no longer need these.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
Update to reflect new graphics recipes.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
Add common to BBFILES so crownbay can find recipes it needs from
there.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
emgd 1.6 requires xserver 1.9.3, which is no longer in meta, and it
needs to be shared by multiple BSPs, so add it to common.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
This adds a new recipe for the emgd 1.6 driver binaries. For emgd
1.6, the layout of the binaries has changed, making them easier to
install, and we also take the opportunity to sanitize the naming and
make it more apparent that these are the emgd driver bits
corresponding to a particular emgd release, 1.6 in this case.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
Tom Zanussi
Bruce Ashfield
Darren Hart
Paul Eggleton
Dexuan Cui
Tom Zanussi