Age | Commit message (Collapse) | Author |
|
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Use patch 4.1.19-rt22 (which applies cleanly) despite the fact that the
kernel is currently based on 4.1.20, because 4.1.20-rt23 is not yet
available at a stable URL.
The same issues that needed to be patched in 3.14 are still present in
4.1, so update the patches and defconfig accordingly to apply to the
new kernel.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.23 stable release as well as NXP following changes:
deb84cd MLK-12722: ASoC: fsl_spdif: clear the validity bit for TX
20de11d MLK-12607: ASoC: fsl-asrc: Add the support of 12kHz and 24kHz
af2256b MLK-12464-2: ASoC: wm8960: fix clock is not correct after suspend/resume
d51a5af MLK-12464-1: ASoC: fsl: imx-wm8960: Fix no clock after suspend/resume randomly
efb83ff MLK-12620 ARM: imx: correct i.MX7D fuse MAC1_ADDR offset address
a90438e MLK-12706-3 arm: imx_v7_defconfig: build in bcmdhd
b361e5d MLK-12706-2 net: bcmdhd: set the bcmdhd driver default build in
d60d208 MLK-12706-1 mmc: sdio: add sdio reset function for bcmdhd wifi
36a8f81 MLK-12705 ARM: imx: add support for i.mx7d TO1.2 busfreq
c0433b1 MLK-12685 ARM: dts: imx6sx-sabreauto.dts: improve usdhc4 pad drive strength
92c7757 MLK-12675 ARM: dts: imx: keep RTC enabled for software poweroff
c35a5dd MLK-12671 ARM: imx: support single soc config
3b2520f MLK-12617 mmc: Fix compile error when CONFIG_MMC=m
d5d7c02 MLK-12623-03 ARM: imx: Add cpu speed grading check for imx6ul
b1d1ba8 MLK-12623-02 ARM: dts: imx: Add 700MHz setpoint define in dts
7fe0d46 MLK-12623-01 cpufreq: imx: Add support for 700MHz setpoint in cpufreq
a4d2a08 MLK-12277 media: camera: add check for width and height against 0
85a98a0 MLK-12573 ARM: dts: set LCD_nPWREN low to make VLCD_3V3 output 3V3.
3456a58 MLK-10934 mtd: use memcpy to replace the memcpy_fromio
d410e45 MGS-1678 [#2269] memleak in GPU driver sysfs interface
160bf92 MA-7715 fix GPU kernel panic reported by android CTS
0e3d9b1 MGS-1630 5.0.11.p8 driver can't pass build with kernel 4.1 on Android M6.0
a52956f MLK-12466 ARM: dts: imx6ul-14x14-evk-usb-certi: add USB certification dts
Change-Id: I91b274ccd29c9d52a274599d66e874fa474550bf
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Kernel updates for i.MX 6UltraLite T1.1 silicon.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Update the URL because patch-3.14.61-rt62.patch.gz got moved to the
'older' subdirectory.
The -rt patches are published in the projects/rt/3.14 directory, and are
then moved to projects/rt/3.14/older when the next version of the patch
is released.
Previous versions of this recipe intentionally used "older" patches
(even when the latest one would apply) specifically because the URLs
remain stable that way. This got broken in the update to 3.14.52-1.1.0 GA.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Recent changes in siggen.py check for task hash and generate build errors
called Taskhash mismatch when using variables with date and time. Exclude
date time variables as done in kernel.bbclass.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Commit 445b81a7 adds the initial support for the Warp7 board.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the kernel fork for the 4.1.15-1.0.0 GA and merges the
4.1.20 stable release on top of it.
Up to now, no extra fixes are applied on top of it but this is likely
to change as vendors start to base their work on this tree.
Change-Id: I2f7c330b35f7bf2ae916b84147e445b28cb8e829
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Upgrade to the 4.1.15-1.0.0_ga release
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This upgrades the patch from 3.14.58-rt59 to 3.14.61-rt62.
Change-Id: If3d0beb989723859bcfce5a95810fb3d8d9e340a
Signed-off-by: Julio Cruz <jcsistemas2001@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The FSLC kernel fork has been updated for the 3.14-1.52-1.1.0 GA
release. It is a consolidated release covering all i.MX active product
lines covering:
- i.MX6QDL
- i.MX6SL
- i.MX6SX
- i.MX6UL
- i.MX7D
The patch also updates the linux-fslc-imx-rt flavour for the very same
kernel fork and ensures people uses the built-in Vivante GPU driver,
when using the Linux RT support, as the external kernel module does
not support it yet.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Introduce Linux 4.4 based vanilla Linux kernel. This version
allows to use the DRM DCU driver on Vybrid (with some additional
patches). Also enable PWM support through Vybrid's FlexTimer
module, and update the defconfigs.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Besides the revision change, this synchronizes the defconfig used for
the i.MX and the Vybrid SoCs. The only SoCs using a specific defconfig
file are the MXS-based ones (i.MX23 and i.MX28) as the others are
consolidated on the single defconfig file.
Change-Id: Id00d6dbaa8fcec5c9b6c5089d11d1ebe5c0e44e1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Tux logo should be disabled by default to allow a cleaner boot
process.
If a different configuration is needed of any specific machine, it can
be overriden using custom config.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Disable evbug, so machines using the kernel recipe do not have it
loaded by default.
The evbug kernel module can be enabled if needed, per machine, using a
custom config.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SystemD requires the CONFIG_FHANDLE option to be enabled to
properly support the serial console getty initialization. This fixes
following error:
,----[ i.MX6Q SABRE Smart Device boot error ]
| [ TIME ] Timed out waiting for device dev-ttymxc0.device.
`----
The error has been catch while testing a customer image in a pure
SystemD distro, based on O.S. Systems Embedded Linux.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The module autoloading ensures 'galcore' to be probed as early as
possible during the boot. The order is important so the GPU can be
used as fast as possible, ensuring a reduced time until the initial
GPU-based application is loaded.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.13 stable release fixes into the fork.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This reverts commit 649f479f118567d62a5a57d690fb3fe3915f0ea7.
The 4.3 version of kernel cause build errors on lttng and cannot be
included until those are fix. We are reverting it now and will add it
back once OE-Core is fixed to support it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Besides the revision change, this synchronizes the defconfig used for
the i.MX and the Vybrid SoCs. The only SoCs using a specific defconfig
file are the MXS-based ones (i.MX23 and i.MX28) as the others are
consolidated on the single defconfig file.
Change-Id: Id01a6050daaaee9bc931afa4583ec11f7b7d6da1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This recipe is based on the now-deleted linux-imx-rt recipe, using the
same set of patches.
The linux-fslc-mx6 kernel is currently at upstream version 3.14.54, for
which no realtime patch has been released, but patch 3.14.51-rt52
applies cleanly.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 3.14.28 has not been fixed to work with the GCC 5.2 making it
unusable. Remove this version until someone does the upgrade to the
newer releases.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 33615de (linux-imx: Upgrade to 3.14.38-6QP_beta release) did not
remove the linux-imx-mfgtool-3.14.28/mx6/defconfig file, keeping it
unused. Remove it now.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The mqxboot and mcc Linux kernel module requires the Timesys kernel to
work. The kernel is not in use in meta-fsl-arm anymore and in long
term the Vybrid will be using the remoteproc mechanism to share
resources across the different CPU, inside of the SoC.
As consequence of the update for the Linux 4.1 kernel, those recipes
ought to move for meta-fsl-arm-extra where 3rd party boards can keep
using them.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Commit fa868c9e ("dts: imx6: fix sd card gpio polarity specified in
device tree") missed to be applied into 4.1.11 causing esdhc regressions
on mx6, so let's apply it so that we can have SD card working with
4.1.11.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Vybrid reference board (twr-vf65gs10) now uses the linux-fslc
(4.1) kernel. This makes this kernel recipe unused. Remove it as it
has known security flaws, toolchain problems and is quite old.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add an optimized defconfig for Vybrid which includes NFC (NAND) and
DCU (fbdev) support for Vybrid.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates linux-fslc to the latest version which includes
the Vybrid related patches.
622e3d4 video: fsl-dcu-fb: fix compile issue without PM_RUNTIME
b71a77f video: fsl-dcu-fb: fix pixel clock polarity
55a3f93 video: fsl-dcu-fb: add suspend/resume support
526c502 video: fsl-dcu-fb: fix signal polarity defines
3b5d7a3 ARM: dts: vf610-colibri: enable DCU framebuffer
0614d77 video: fsl-dcu-fb: support signal polarity configuration
202f53d video: fsl-dcu-fb: use native-display timing
1f632a8 video: fsl-dcu-fb: use num_timings to iterate timings
5801959 Documentation: DT: Add DCU framebuffer driver
5afe56f fb: Add DCU framebuffer driver for Vybrid VF610 platform
fdad0f6 ARM: clk: vf610: Add DCU and TCON clock support
0cdb0dc ARM: dts: vf610-twr: Enable DCU and TCON devices
ca0333a ARM: dts: vf610: Add DCU and TCON nodes
463b5a3 ARM: dts: vf-colibri: enable NAND flash controller
e439239 ARM: dts: vf610twr: add NAND flash controller peripherial
031328c mtd: nand: vf610_nfc: include missing pincrl/consumer.h
5812299 mtd: nand: vf610_nfc: add device tree bindings
48ea668 mtd: nand: vf610_nfc: add hardware BCH-ECC support
ce28974 mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others
4fc9a49 mtd: nand: add common DT init code
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.11 stable release fixes into the fork.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Those patch files were left orphan when upgrading the linux-imx and
u-boot-imx recipes, becoming unused. The removal of them cause no harm
and helps to keep the metadata clean.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Upstream Linux 4.1 supports the Vybrid SoC quite well, so enable
linux-fslc also for Vybrid SoC's.
Change-Id: I6745b67f4cc4b12ccc6f05754af9241e60731c6a
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Cherry picked patches from future kernel versions to fix gcc5.2
build errors
Change-Id: I0671c8a44a7c4318451bc00f13f6ee26fe48b05b
Signed-off-by: Chunrong Guo <B40290@freescale.com>
|
|
The 964e5a3 revision includes the 3.14.54 stable release fixes plus
following changes contributed by Gateworks:
7292dc7 ASoC: add tda1997x codec support
aa4ee3d ipu3: keep buffer offset aligned
05608b5 ipu3: fix stripe calculation
30c6d90 thermal: imx: allow crit_delta to be passed in via kernel param
334fc35 arm: dts: add handles to anatop regulators
c7a4d85 fec: Russell Kings corruption fix
0c2c11f net: fec: fix the warning found by dma debug
b5b53b5 pci: imx6: Add delay after LTSSM transition
6dba6b0 fec_main: add mb() before setting status
05ab2a6 net: fec: fix NULL pointer dereference in fec_enet_timeout_work
07465db drivers: video: mxc: Add support for interlace on hdmi out
3eca3ca imx: thermal: use CPU temperature grade info for thresholds
172ad49 media: pci: tw6869: Implement ENUM_FRAMESIZES ioctl
a7d429e media: pci: tw6869: add device registered dev info
957f3fa media: pci: tw6869: initial add
cb61124 ARM: dts: imx: fix invalid #address-cells value
ea53bf7f imx:busfreq: disable busfreq driver by default
e3e114d video: mxc: ldb: use native mode for display timings
fa6b13a net: igb: register mii_bus for SerDes w/ external phy
09359b6 net: igb: add phy read/write functions that accept phy addr
d6daeac net: igb: add i210/i211 support for phy read/write
00b2ceb video: mxc: add adv739x TV encoder
3117a93 mxc_capture: add tda1997x HDMI receiver video support
9348099 imx: add imx tda1997x i2s DAI support
b81d263 mfd: add tda1997x HDMI receiver support
dba225f mxc_capture: check for init_camera_struct failure
09f7c1f mxc_capture: add device registration info
1db12fc mxc_hdmi: present sysfs edid as binary data instead of ascii
bd0601d mxc_hdmi: enable overflow interrupt after initialization complete
d6cc9e6 mxc_ipuv3: show device name for overlay fb
a7f44be mxc_ipuv3: show ipu_id/disp_id of registered device
e9ea090 regulator: Add LTC3676 support
3e12a168 regulator: core: Fix the init of DT defined fixed regulators
154b8be hwmon: mma8451: add fxos8700 magnetometer support
e19d671 hwmon: mma8451: add fxos8700 accel support
760c31c cpufreq: imx: add a 25mV tollerance to the operating point voltages
ef2eda1 cpufreq: imx: show soc voltage when debugging
b205762d cpufreq: imx: init mutex before it can be used
04bc9ed input: edt-ft5x06 - add device-tree config for screen res and inversion
1ca89b6 Input: edt-ft5x06 - fix an i2c write for M09 support
dc5f6c9 Input: edt-ft5x06 - add a missing condition
f2854dd Input: edt-ft5x06 - add support for M09 firmware version
390394c Input: edt-ft5x06 - ignore touchdown events
6b60fb3 Input: edt-ft5x06 - adjust delays to conform datasheet
74bceb0 Input: edt-ft5x06 - add DT support
481da81 input: goodix: add invert and rotate support via device-tree
6297f18 input: goodix: add support for performing init sqequence
4746ef3 input: goodix: add device-tree support
For compatibility with the Vivante kernel module build, the following
commit has be also applied:
964e5a3 FSLC: Add busfreq-imx.h header for forward compatibility
Change-Id: I92b566943c7245751b484302f2320b42ec7d761c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The driver source code provided by Freescale needs fixes. This fork is
a community driven development and allow faster development and easier
integration of fixes.
The "+fslc" suffix is added to the module during probing to make a
clear identification.
Change-Id: I914f1a7731263effdef75827e3a9fb8daba37ec9
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
busfreq-imx.h
The renaming of include/linux/busfreq-imx6.h to include/linux/busfreq-imx.h
is not consistent over the many kernel versions currently being built. This
changeset works around this inconsistency by creating a local symbolic link
to whatever file is actually present in the kernel sources.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
|
|
The build fail about the bus frequency header (linux/busfreq-imx6.h)
not being found is caused by the mistaken check for the wrong kernel
version.
The regression has been introduced by d476c35
(kernel-module-imx-gpu-viv: Upgrade to 5.0.11.p7.1 for 3.14.38-6QP_ga
release) which has been not properly tested. This patch fixes it,
again, by adding back the removed patch.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The linux-imx.inc based kernels now can dynamically provide the
Vivante kernel driver and satisfy the runtime dependency added for the
Vivante GPU user space libraries. The beauty of this solution is that
it makes ease for 3rd party kernel to reuse the same infrastructure
and use the external module easily.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- Package name is changed to kernel-module-imx-gpu-viv.
- Patch platform-Fix-kernel-version-check-for-3.14-based-ker.patch is no longer required
as the fix has been applied upstream.
- Upgrade to graphics version 5.0.11.p7.1
- Makefile patch will be included in next release.
Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Cherry picked patches from future kernel versions to fix gcc5.2
build errors
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
All i.MX6 with GPU use 6QP_ga and 6ul and 7d use 6ul_ga release
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The build fail about the bus frequency header (linux/busfreq-imx6.h)
not being found is caused by the mistaken check for the wrong kernel
version.
This patch fixes it by adding the right kernel version to be checked.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This is the Vivante kernel driver split from the kernel source code in
order to make it possible to be used in any kernel source since
3.10.53.
The graphic version is 5.0.11.p6.3
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merge the 3.14.52 stable release into the fork.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.7 stable release fixes into the fork.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This upgrades the kernel fork for the 3.14.51 stable release. Another
change is the inclusion of:
22f6925 arm: Export cache flush management symbols when !MULTI_CACHE
This fixes following error:
galcore: Unknown symbol v7_dma_map_area (err 0)
galcore: Unknown symbol v7_dma_flush_range (err 0)
When using the Vivante GPU module as a module.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Let IMX6UL be supported by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|