Age | Commit message (Collapse) | Author |
|
This updates for the upcoming 2016.11 release.
This is based on top of 2016.11-rc2 plus the following changes:
- c7f1e5 embestmx6boards: Use PARTUUID to specify the rootfs location
- 0c0dcb8 mx6cuboxi: Change finduuid to find on first partition
- caf0311 wandboard: Change finduuid to find on first partition
- aeb1be5 mx6cuboxi: Use PARTUUID to specify the rootfs location
- 1bcfc34 wandboard: Use PARTUUID to specify the rootfs location
- 6d6dba9 wandboard: Set fdt based on board_rev and board_name
- 69176f6 warp: Change default bootenv configuration
- 4d31a07 mx6sabresd: Enable video interfaces in bootargs
- 9904cfb iMX6: Change mmcroot to use fixed mmc block index for USDHC
- 77f6c08 embestmx6boards: Change default bootenv configuration
- 1e89967 mx6sabresd: Use LDO dtb file until LDO bypass support is added
- d434e1b mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 0dbe853 embestmx6boards: Use PARTUUID to specify the rootfs location
- 7b2aeb5 mx6cuboxi: Change finduuid to find on first partition
- 163cc05 wandboard: Change finduuid to find on first partition
- 72531ef Revert "Revert "embestmx6boards: convert to use
config_distro_bootcmd.h""
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 157ec06 mx6cuboxi: Use PARTUUID to specify the rootfs location
- 1009975 wandboard: Use PARTUUID to specify the rootfs location
- 7616d99 configs: wandboard: Set fdt based on board_rev and board_name
- 9128164 Revert "Revert conversion for config_distro_bootcmd.h"
- 0012fc2 Prepare v2016.09.01
- 7148ad9 Revert "image-fit: switch ENOLINK to ENOENT"
- 8303828 Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changes:
8a050e0 ls1088a: Update SerDes Protocol to support Gen2 PCIe Conroller
7a786b6 armv8: ls1088A: update RCW binaries
08e77ac ls2088qds: Add RCW for SD as boot src
1621397 ls1088a: Add IFC, QSPI RCW binaries for QDS, RDB
59728ba ls2088: Add workaround in RCW for A-009102
5462666 ls2088: Add workaround in RCW for A-009102
2f05e20 update the license to Freescale-Binary-EULA
569c4f6 LS2088qds: Add bin1 configuration with 3,3d serdes
2be56e3 Merge pull request #19 in DPAA2/ls2-rcw from ~B37399/ls2-rcw:master to master
43a2d94 LS2088qds: Update sys-clock frequency to 100MHz
bf8e575 LS2088RDB: Add QSPI RCW
1670adb LS2088QDS: Add new serdes configuration 0x4d_0x57
167b0cf LS2088A: Update RCW
fa85094 LS2088rdb: Enable the serial interface of these 2 rcw
7e36ea6 LS2088A: Add RCW for adephi's usecase
0c0fce0 LS2088/2085: Add new rcw to support new PCIe lanes
45cc8fa LS2088A: Add RCW for LS2088A
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changes:
7b0fea8 Merge pull request #70 in SDK/u-boot-devel from jira/QSDK-2961 to master
7c15891 pbl: use "wait" command instead of "flush" command
da9710b Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand.
d22a007 ls102xa: spl: fix the macro name of MMC mode
5c5a3e1 fsl-layerscape: spl: fix the macro name of MMC mode
729761d fsl-layerscape: spl: remove duplicate init_early_memctl_regs()
0f03ebd armv8: ls1043ardb: fix types of variables
5dc6fbd armv8: ls1043a: remove redundant code in board files
89154ca armv7/ls1021atwr: lowlevel init and enable i-cache
b091c4b fsl_sfp : Modify macros as per changes in SFP v3.4
d2b8266 armv7:ls1021a: Enable workaround for DDR erratum A-009942
551abf9 fsl_sec_mon: Update driver for Security Monitor
462a9f3 layerscape/ppa: Refactor PPA validation code
25f8b57 crypto/fsl: Update blob cmd to accept 64bit addresses
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
fix interrupt notification to Intel(R) hosts with IOMMU enabled
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
in poky, the formfactor/config set HAVE_KEYBOARD=1, as it
assumes a key is connected as default. This causes the disable
of the software keyboard launch in matchbox.
Set HAVE_KEYBOARD=0 for i.MX6 Q/QP/DL/Solo/SL/SX.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Coverity fixes for resources leaks, null deeference, string overflows and checking return
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- Makefile fixes to work with LDFLAG changes
- mxc_mmc_tty_test: Fix for null terminal setting and printf
- evtest - new sensor test
- memtool - Add i.MX 6ULL support
- mx6s_v4l2_capture: Add 6ULL support
- mxc_vpu_test: Add new IOCTL_VIDEOC_S_INPUT_CROP for 4.1 kernel
- mxc_vpu_test Support picture width height no multiple of 16
- mmdc, mxc_ipu_dev and mxc_vpu_test: replace index with strchr
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Support i.MX 6ULL and upgrade to 2016.03 U-Boot
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Git recipe is now preferred so we are dropping the old release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Git recipe is now preferred so we are dropping the old release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
- 0dea106 Merge tag 'v2016.09.01' into 2016.09+fslc
- f3363c0 (tag: v2016.09.01) Prepare v2016.09.01
- 44e3dd1 Revert "image-fit: switch ENOLINK to ENOENT"
- 6baa904 Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The tool will be maintained as an open source project.
The repository can be found by https://github.com/NXPmicro/imx-uuc
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The sdk-v2.0.x branch is rebased, previous commit is in fsl-sdk-v2.0
tag instead of sdk-v2.0.x branch.
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This update the U-Boot fork to the 2016.09 release. The following
changes are applied on top of the original release:
a3d27ea wandboard: Fix mmcroot device name
6ed7ce7 Revert conversion for config_distro_bootcmd.h
547c5ed warp: Change default bootenv configuration
dced260 wandboard: Drop revision specific DeviceTree support
6218c13 mx6sabresd: Enable video interfaces in bootargs
3196b92 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
a405f38 iMX6: Change mmcroot to use fixed mmc block index for USDHC
ddd4e7f embestmx6boards: Change default bootenv configuration
290d197 mx6sabresd: Use LDO dtb file until LDO bypass support is added
eee8253 mx6slevk: Use LDO dtb file until LDO bypass support is added
b8944fd arm: imx: add i.MX6ULL 14x14 EVK board support
067c0b6 dm: mmc: intialize dev when probe
6c7981f arm: dts: add device tree for i.MX6ULL
5bd8722 dt-bindings: add i.mx6ul clock header
cfe216b arm: dts: imx6ull: add pinctrl defines
56e4d12 pinctrl: imx6: support i.MX6ULL
3715a11 imx: iomux: fix snvs usage for i.MX6ULL
74592f9 imx: imx6ull: adjust the ldo 1.2v bandgap voltage
1245598 imx: mx6ull: Add AIPS3 initialization
de54ed4 imx: mx6ull: Update memory map address
c607887 imx: mx6ull: update clock settings and CCM register map
f4fdd70 imx: mx6ull: adjust POR_B setting for i.MX6ULL
c67a27c imx: mx6ull: misc soc update
3349f26 imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ
1cc2fda imx: mx6ull: skip setting ahb clock
5be61be imx: timer: update gpt driver for i.MX6ULL
489f44d imx: ocotp: support i.MX6ULL
c8edd8a imx-common: introduce is_mx6ull
cddd8bf imx: mx6ull: add kconfig entry for MX6ULL
b8fea53 imx: mx6ull: add mx6ull major cpu type
6e6b252 imx: mx6ull: add iomux header file
480b1d5 configs: enable device tree for Colibri iMX7
cd81c94 colibri_imx7: use Ricoh RN5T567 to reboot the board
b900233 arm: dts: imx7: add Ricoh RN5T567 PMIC node
e1df8be power: pmic: add Ricoh RN5T567 PMIC support
2312eb0 colibri_imx7: remove legancy UART platform data
11169db colibri_imx7: remove legancy I2C support
76620e7 arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree
23665c2 arm: dts: imx7: add pinctrl defines
e104855 pinctrl: imx: do not announce driver initialization
aee3b4c dm: imx: serial: support device tree
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The package provides firware files for 4 different modules.
This patch install each module in a different subfolder, so both can coexist.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The default Kernel defconfig points the bcm repository, but the recipes
was creating a brcm repository.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This fixes the build breaks with unit tests that includes external libraries
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The recipe has been changed to use the SoC specific override. It makes
the recipe easier to read and to maintain.
Change-Id: Iece4680dc88e1ee83e9f06b493074ede5c505dee
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The recipe has been changed to use the SoC specific override. It makes
the recipe easier to read and to maintain.
Change-Id: I6cb608efea8668e57bbde24750d1a857737271d1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The tools "kobs-ng" will be maintained as a open source project.
The repository location is https://github.com/NXPmicro/imx-kobs
Keep patch "fix-compile.patch" only as the other two are merged into new version.
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add the subpackage firmware-imx-brcm which installs 4 set of WiFi and Bluetooth
firmwares:
* 1BW_BCM43340
* 1DX_BCM4343W
* SN8000_BCM43362
* ZP_BCM4339
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The gcc-cross default linker hash has been changed in OE-Core:fa436aeb,
due that the broken recipes (which were not respecting the set LDFLAGS
settings) are now exposed.
This fixes the error setting the need Make flags so the build system
obey the LDFLAGS setting.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This reverts commit e4a93c79de6aae56182c63c6223c19e01bdfeb42.
The git repository pointed in the commit is not part of any NXP release
so it is not tested.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following change:
- e6b4241 wandboard: Fix mmcroot device name
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following change:
328e7d6: warp: Fix RAM size runtime detection
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add firmware for BCM4339/TypeZP and include a new sub-package:
firmware-imx-bcm4339
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Rework recipe to use ${base_libdir} instead of pointing direct to the "lib/" path.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changelog:
ed90f15 fix dequeueing of rng descriptors
b83c7e9 add FIXME note regarding response rings
39ec4f5 add support to read SEC fault registers
a92d35d mark as not used the command field in dev handshake structure
06d0ca0 remove code blocks to enhance clarity
f8447c5 remove not used handshake field
4955e78 describe field purpose
abc3893 remove not used counters from local resources
36f23a0 rename handshake counters to match local structures
cfcb505 describe the structure member
bcc6f5e compact the use of if-else conditional
4b0fa3e align debug print output for easy readout
9cac843 split double assignment to clarify code
b05aef4 rename functions for clarity
837d691 rename counter to be consistent with the rest of code
4d5461d fix memory allocation for interrupt flags
bb46e51 group functions together for easy review
f0bd7f3 introduce variable to reduce code duplication
e6274e0 move #define out of the structure into a common definitions area
2257be3 rename handshake structure located on host
4129716 rename handshake structure located on the device
b09a3ad describe SEC registers
0e6c428 simplify calculation of address alignment
cb18b7e clarify meaning of a hard-coded register (GUTS_SVR)
45e730c group assignments and prints to simplify code review
4fca737 group together all msi and ob assignments
6eb1e08 remove useless assignment which is overwritten later
4c07318 fix calculation and print free memory
479c677 minor clean-up in code layout
db7c91c add missing commas to clarify code intent
7bbdf77 remove unused "intr_ctrl_flags" field
fb7b45d use offset of response ring instead of its physical address
7614c6e use offsets into ob-mem instead of host dma addresses
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
Changelog:
873f44c Use unified EULA file
f0ef785 Update End-User License Agreement
df1f1d8 ARM Support for hardware breakpoints and watchpoints
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
* change license to Freescale-EULA
* add tcl-native to DEPENDS as byte_swap.tcl is needed to run
* run byte_swap.tcl for all the boards
* update COMPATIBLE_MACHINE to support ls1043a, and exclude ls2080a
Changelog:
1af724b update End-User License Agreement
76854c9 ls1043aqds: revise the description of SERDES1 Protocol 0x3358
970cc5d ls1043aqds: add SATA support under QSPI boot
017ed94 ls1021a/ls1043a: byte_swap: should 8 byte alignment
ea90914 ls1021a: remove the unnecessary PBI
3f37603 ls1043aqds: Clear SerDes RxBoost on lane D
cbf49c1 LS1043a-RDB: Add RCW files for UEFI bootloader
419bd59 ls1043ardb: SECURE_BOOT- RCW added
ae3461a qe-tdm: add qe-tdm support on ls1043ardb
26042fa ls1043ardb: Add RCW for ls1043ardb board
4ae7fc3 ls1043aqds: Add RCW for ls1043aqds board
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
Changelog:
a95f42a Unify the EULA file
441e947 Update the EULA file
update the license file
add fsl-ch2 as COMPATIBLE_MACHINE
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
It includes the following changes:
ae973bc warp7: Select secure boot
b66cb5f warp7: Modify fdt_file environment variable
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backport following changes from upcoming 2016.09 release:
16a2670 arm: imx: Add support for Advantech DMS-BA16 board
b5e61c4 mx7dsabresd: Print secure/non-secure mode info
28830fe mtd: nand: mxs: fix cache alignment for cache lines >32
Change-Id: I332effe171f58f814f5f525e835b22f6e54e5601
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backport following changes from upcoming 2016.09 release:
e38d99f MAINTAINERS: i.MX: Add board/freescale/*mx* path
aad9e75 mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig
c40981b mx7_common: initialize generic timer on all CPU's
bb7dbb1 mx6ul_14x14_evk: Remove unused define
1f89a59 cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE
5433e5c novena: Remove uneeded PHYS_SDRAM_SIZE
97145ad bx50v3: Use imx_ddr_size() for calculating the DDR size
557c86a aristainetos: Use imx_ddr_size() for calculating the DDR size
f2ff911 warp: Use imx_ddr_size() for calculating the DDR size
7b53769 warp7: Move some USB configuration options to defconfig
bc7bbb5 colibri_imx7: add Colibri iMX7S/iMX7D module support
c2381c0 cgtqmx6eval: Replace is_mx6q() for macro
9280131 mx6cuboxi: Replace is_mx6q() for macro
5396047 wandboard: Replace is_cpu_type() for macro
ccbd486 imx: ventana: add dt fixup for watchdog external reset
6da2a41 imx: ventana: refactor board-specific dt fixups (no functional change)
f13197c imx: ventana: make hwconfig initialize based on board configuration
505d466 imx: ventana: add extra DIO's for GW5520
ede70ae imx: ventana: make number of digital I/O's dynamic
85327cb imx: ventana: make RS232 enable board specific
67d376a imx: ventana: re-enable late board info display
1f71a76 imx: ventana: default pci to disabled
71fbd29 pci: allow disabling of pci init/enum via env
e315991 imx: ventana: add dt fixup for eth1 mac-address
c8bfa71 imx: ventana: add dt fixup for GW16082 irq mapping
6308105 mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT
6eae48f pico-imx6ul: drop warning due to redefined
c5502fb mx6: wandboard: fix warning due to missing prototype
a9fef43 Fix build for mx7dsabresd (secure config)
Change-Id: I1fa2a8a4db9d265494831deef53a11633faf3454
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 9da4a42 Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
- 7be8ff4 serial_mxc: Remove unconditional DCE setting
- 6dec211 mx6: clock: Fix the logic for reading axi_alt_sel
- 68f2c3e Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite"
- 2fd99ea imx_watchdog: add weak attribute to reset_cpu function
- c782384 mx7_common: use Kconfig for ARMv7 non-secure mode
- b8cc70e mx7_common: Put display board info config into board file
- 72a9967 mx7: set soc environment according to exact SoC type
- ff3ecc4 usb: ehci-mx6: introduce config for high active power pin
- 97488b5 usb: ehci-mx6: configure power polarity in usb_power_config
- ce0c796 usb: move CONFIG_USB_EHCI_MX7 to Kconfig
- e22ac58 dm: imx: serial: Support DTE mode when using driver model
- 65db95b warp7: Remove CONFIG_BOOTDELAY variable
- 1231d04 ARM: configs: cm_fx6: add mtd support
- 14619b5 ARM: board: cm_fx6: fixup mtd partitions in the fdt
- 9fa3af0 fdt_support: define stub for fdt_fixup_mtdparts
- f1a2b56 ARM: configs: cm_fx6: improve default environment
- d1e28f0 pico-imx6ul: Add PMIC support
- 292806e wandboard: move environment partition farther from u-boot.img
- 8b5df31 Revert conversion for config_distro_bootcmd.h
- 9222180 Merge pull request #11 from Kynetics/2016.07+fslc
- 1207b97 warp: Change default bootenv configuratio
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add function to check if kernel support raw_mode and fix function that
calculates the geometry based on known info from the mtd partitionmtd
geometry.
These patches were copied from:
https://github.com/Gateworks/openwrt/commit/379e87df4fb67198fe900ffe2a394e69fbd47801
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
U-Boot will compile its own tools during the build, with specific
configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools
require openssl. This patch adds 'openssl' as a PACKAGECONFIG that
enables the use of openssl-native as a dependency and also adds the
HOSTCC flags that U-Boot uses when compiling the host tools.
(From OE-Core rev: 7d0edf5d04fba0b642bfb08a1de28fbc8e480209)
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
SDK_VERSION defaults to nodistro.0 which is not expected in
this recipe.
Also adjust the location of some settings, no code change.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
By using the new UBOOT_CONFIG format, the final u-boot binary will be
configured in machine config file, and will be processed in upstream
u-boot.inc.
Remove the codes to copy final u-boot binary, and append the special
steps which need boot-format/byte_swap tool to regenerate the binary.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The main features are:
* Upgrade to 2016.01
* On ARM platforms, the U-Boot image includes the device tree
* Non-secure and Secure Boot (ESBC)
* Primary Protected Application (PPA) firmware integration [LS1043A]
* Clock, CPLD, DUART, DDR3, DDR4, DSPI, eSDHC, GIC-400, GIC-500, I2C, OCRAM, PCIe, USB 2 & 3, SATA, UART
* Networking support using eTSEC, FMAN Independent Mode or DPAA2 networking
* DCU, eMMC 4.5, I2C3, LPUART, QSPI [LS1021A]
* eLBC and IFC access to NOR and NAND flash
* Boot from NOR, NAND flash, eSPI, SDHC
* Boot from SRIO [B4860, P5020, P4080]
* Voltage ID (board specific)
* CodeWarrior debug patch for U-Boot
Detailed commit log can be found at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/log/?h=sdk-v2.0.x
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Zongchun Yu <zongchun.yu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Zongchun Yu <zongchun.yu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|