Age | Commit message (Collapse) | Author |
|
Those are untested and anyone interested in supporting them (mainly
barebox) ought to send the support to OE-Core instead.
This also removes the corresponding code from the
image_types_fsl.bbclass as it is not going to be used from now on.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following change:
e48de4f - update binaries for LSDK 18.06
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Following changes are included:
11abda9 - armv8: ls2080ardb: update copyright claim
7d5b814 - Revert "EHCI: Fix endian access issue on EHCI intinalization"
160deab - Revert "powerpc/T104xRDB: Fix endian access issue on EHCI intinalization"
007ac5c - Revert "powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization"
e82a7bc - LS1043ARBD: Fix SD Boot issue with PPA
ec7f4b3 - armv8: ls1088a: change dpl load address to 0x80001000 from 0x80000000
93bb79f - board: freescale: ls1012afrwy: Add LS1012A-FRWY board support.
aabf70f - board: freescale: ls1012afrx:Common files to support
da97a2b - watchdog: disable to build the driver in default
60afe56 - watchdog: Kconfig: add config to disable wdog reset
cf17a12 - watchdog: driver support for layerscape
6ac9ac0 - armv8: ls1088: change ttyS1 to ttyS0
0c9305b - boards: freescale: lsch3: Add 0.9v entry for vid
0346460 - armv8: ls1088a: change dpl load command from apply to lazyapply.
c43f05a - drivers/net/vsc9953: Initialize action RAM in VCAP complex
0a1adba - board: Kconfig: Re-Arrangement of PPA firmware and header addresses
ecf1d55 - arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command
4d94f28 - board: freescale: ls1012ardb: Add command to switch QSPI bank
cba0675 - driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b
7c4f3c8 - LS1012AFRWY: Add Secure Boot support
51a93cc - board: move ppa header address in board specific kconfig
e26f485 - board: ls1012a: FRWY-LS1012A board support
d000b14 - board: move ppa firmware address in board specific kconfig
2f51b35 - armv8: ls1088a: Enable USB in ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
842df34 - armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust
1fa9417 - armv8: sec_firmware: Add support for multiple loadables
eca9656 - armv8/fsl-lsch2: correct QMAN clock
c3a6ed4 - driver: net: fsl-mc: updated copyright info
39966d9 - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
ccde7d9 - armv8: ls1088aqds: Enable mdio commands on u-boot prompt
9c912c7 - armv8: sec_firmware: Remove JR3 from device tree node in all cases
5ecc2f5 - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
8ed20db - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA
b133620 - EHCI: Fix endian access issue on EHCI intinalization
faf6feb - u-boot: fixup the iommu-map property of fsl-mc node
8e0c780 - powerpc: configs: Set initrd_high environment varible
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
50c825b - DNCPE-372 Update binary files
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
1f43bef - Fix PBI command length for both ls1088ard and ls1088aqds boards.
32f8b4f - ls2088ardb_rev1.1: Add rcw_2100.rcw for serdes protocol 2a_41
84078ad - Include auto swapped binaries for qspiboot during install target
8646cf1 - ls2088ardb: Add rcw_2100.rcw for serdes protocol 2a_41
591b59d - ls1012a: Add ls1012afrwy RCW configuration files
fd6b9ef - Add support to auto swap rcw for qspiboot if required.
6f514c1 - Ls1043aqds: Fix building error for rcw_1600.rcw
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
dcbe27b - Adding policy.h flag for spectre v4 mitigation
4fbad6a - Fix suppression flag on sec_init
24d6891 - Adding SUPPRESS_TZC and SUPPRESS_SEC to policy cfg file; Adding platforms qds & rdb to device LX2160; Adding platform emu t
006a0e5 - Correcting disable load-pass-store in CPUACTLR from bit [53] to bit [55]
8e557f9 - Adding spectre v4 mitigation for a57, a72 cores.
b0a07cf - Updating reset function for LX2160.
74814cf - Increasing L3 cache flush timeout from 100ms to 333ms.
9d5ecd2 - Enabled OP-TEE support on LS1012FRWY baord.
9950f2b - Removing wfe from core 0 sequence when waiting for soc init tasks to complete.
508ed94 - Enabling initialization of the CCN-508 interconnect.
fcede9a - Adding support for ls1043 variant ls1023, and ls1046 variant ls1026.
7d5dcc1 - Fixing PSCI_SYS_OFF so that this function never returns.
8e8fc09 - Removing \r from line endings of shell script gen_its.
1c4fc78 - its: Correct config node as per upstream u-boot guideline
f00e7ef - Adding smc function SIP_HW_UNQ_KEY_32.
c87863a - Fixing usage of _check_sec_disabled().
d0ec59c - Fix for PLATSEC-437 & PLATSEC-457.
926fb97 - Adding smc function (SIP_ALLOW_L2_CLR_32) to allow clearing of L2 memory errs.
781d7b5 - Fixing broken build of LS1043, LS1012.
7289e86 - Adding smc function SIP_ALLOW_L1L2_ERR_32; Added test for SPD interface.
8804017 - Providing very fast-path for SMCC_ARCH_WORKAROUND_1
e9dfa28 - Moved _soc_check_sec_enabled() to _check_sec_disabled(); Fixed conflicting defs in LX2160 soc.h.
474b797 - Changing LX2160 cluster 3 handling from RCW frequency-based to RCW[850] selectable.
f56bd49 - fuse: Correct OTPMK value mapping to OTPMK registers
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Following changes are included:
de3c46f - api: add MC 10.8.0 APIs
7a3fa0f - Updated DPSECI API
2155e5c - Add MC 10.7.0 APIs
59edbdf - Added MC 10.4.0, 10.5.0 and 10.6.0 APIs
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
9143c2a - Update EULA.txt
6ff561e - Add SCR.txt
*update LIC_FILES_CHKSUM
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
We need dtc version 1.4.5 to build u-boot-imx 2017.03, current
version 1.4.6 raise a lot of errors and can't build older U-Boot
version.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
- Remove .inc file to use only one .bb file
- Add alsa-lib to DEPENDS
- Add patch to use include path when compile sources from test directory
- Drop unused patch
- Update O.S. Systems Software Copyright
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
- Update O.S. Systems Software Copyright
This includes the following change:
- 3f77797 MLK-16374-5: PXP_LIB: configure pxp to be legacy mode
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
- Add O.S. Systems Software Copyright
This includes the following changes:
- c70685d Merge pull request #13 from allenxh/imx8
- d8e5142 imx-kobs: support burn images to imx8mq ddr4 arm2 NAND
- a0e9adc Merge pull request #10 from allenxh/imx8
- 89c14fe imx-kobs: support i.MX8 platforms
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
- Update license checksum to match EULA v22 April 2018.
- Remove .inc file to use only one .bb file
- Update O.S. Systems Software Copyright
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
- Update to latest stable branch
- Add O.S. Systems Software Copyright
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
- Get imx-firmware source code from github.com/NXP
- Remove .inc file to use only one .bb file
- Update license checksum to match EULA v22 April 2018.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Following changes are included:
a092fb1504 spl: Add default values for ARCH_MX7
17ee0afbc7 wandboard: Remove hardcoded baudrate from "console" variable
a9cd19f296 pico-imx7d: Adjust the dtb name
Change-Id: If3c37fb22924dbd7489c188ff45dd590224e255c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The revision used was of a pre-release and we ought to instead point
to the current final release. Fixup it.
Change-Id: Ic1ff8641a3b1d135610b51b5051c2974daf9d88c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This upgrades the fork for the latest stable release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Includes:
* multi UDC support
* linuxrc script fixes
* use soc_uid as usb gadget serial number
Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The dtc must be available during build time. It fixes a build error
when host does not have it installed and we are building a native
variant.
Change-Id: I3a64d40575bce9ae4289a419ea8892fe006b7de6
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*Set PPA_PATH for ls1012a
*Add ls1012a to COMPATIBLE_MACHINE
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*support ls1012a
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The modules-base class has been reworked during the 'sumo' development
cycle and the external modules tools are now handled by the
make-mod-scripts, automatically.
Fixed [YOCTO: #12575].
Change-Id: I5a39517873d90adfb3c423b23d8ac273ef5a31f7
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
a48f3ad - armv8: ls1088: Add SD-boot with IFC-NOR RCW
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
848002f - DNCPE-372: Update license file with NXP-Binary-EULA
9d15cfa - DNCPE-372 Update README for pfe fw binaries
*Update license and md5
*Update SRC_URL
*Fix the installation directory
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
d5b5263 - Add NXP EULA license
*Update license and md5
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes
57401f6 - Update license to NXP Binary EULA
*Update license and md5
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*Include the following changes
100cdac - ls2088ardb: update binary for LSDK 1803
daf1656 - add license NXP-Binary-EULA
*Update license and md5
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
00cde47 - driver: net: fsl-mc: remove usage of CONFIG_FSL_MC_ENET
a2d3f26 - powerpc: configs: Set initrd_high environment varible
cab48d3 - armv8: ls1043ardb_sdcard: delete CONFIG_SPL_FSL_LS_PPA
6f8b6dd - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
03560b1 - armv8: sec_firmware: Remove JR3 from device tree node in all cases
123ee86 - ls1088a: qspi: Enable XIP mode above 16 MB addresses
eb3ddd0 - PowerPC: phy: enable all phylib drivers when use phylib and tsec enet
2efee07 - ls2081a: qspi: Enable config to write aligned data to TxFIFO
b32402c - ls2088a: qspi: Enable config to write aligned data to TxFIFO
e7f0b4a - ls2080a: qspi: Enable config to write aligned data to TxFIFO
1c693ab - ls1088a: qspi: Enable config to write aligned data to TxFIFO
edcb0a5 - Kconfig: qspi: Add SPI_ALIGNED_TXFIFO config details
c6a9fe0 - qspi: Add code to send only aligned data to TxFIFO
1f13780 - ls1088a: Moving CONFIG_FSL_QSPI to defconfig
4cbef43 - EHCI: Fix endian access issue on EHCI intinalization
901ad16 - ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig
7340b38 - armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs
a17a22d - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
226adb1 - armv8: ls1088: Add qixis offsets for lbmap and rcw_src
71fed5f - fsl: common :qixis: Add ifc and emmc switch support in qixis
2705761 - board:ls1012a2g5rdb: define PFE firmware address in kconfig
ec53bd9 - board: ls1012a: update mdio, phy parameters based on serdes protocol
cce1563 - board: ls1012a2g5rdb: avoid phy reset
621dd47 - dm: pci: change bus number register setting compliant with Linux
f5285a8 - armv8: ls1088ardb: secure boot: Use tiny printf to save spl size
a6932b4 - armv8: ls1088a: vid: Add some function in SPL for VID
adc2721 - ls1088a: Add VID support for QDS and RDB platforms
318f7c4 - common: board_f: vid: Add VID specific API to adjust core voltage
d0d1638 - ls1088a: ddr: configure DDR for 0.9v for VID support
55540f3 - ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs
2586b3a - board: common: vid: Add support for LTC3882 voltage regulator chip
dfbc0d1 - Kconfig: Add LTC3882 voltage regulator config
f5f238d - board: common: vid: Move IR chip specific code in flag
094c483 - board: common: vid: Add board specific vdd adjust API
9d25d53 - board: common:vid: Add LS1088A VID Supported voltage values
fe1dc63 - armv8: lsch3: Add serdes and DDR voltage setup
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
baa4117 - ls1021aqds: Fix building error for rcw_1200_lpuart.rcw
6be6b63 - LS2088: Add ls2088aqds RCW configuration files
2d595c7 - LS2088: Add ls2088ardb RCW configuration files
3e2a166 - LS2088: Add ls2088asi and ls2088ardb_rev1.1 RCW configuration files
4a24ae1 - GEN3: STOP PBI command support
fd9ba65 - ls1012: Update RCW field names to capital letters
7a77e65 - Parser update in rcw.py to parse all commands correctly
a0509ab - ls1012a: Add ls1012aqds RCW configuration files
2fb781f - ls1012a: Add ls1012afrdm RCW configuration files
789fe36 - ls1012a: Add ls1012a2g5rdb RCW configuration files
d99ea1e - ls1012a: Add ls1012ardb RCW configuration files
d7b599b - ls1088aqds: Add LS1088AQDS RCW configuration files
ad9a5e0 - ls1088ardb: Add LS1088ARDB RCW configuration files
7c47f30 - Add support of Gen3 family SoCs
0aca1b3 - ls1046a: add the PCIe ERRATA A-008851
ef1380f - ls1046a: modify the comments for PCIe ERRATA A-10477
6d2fb95 - T2080: add workaround of errata A-008851
dd2703d - Ls1043a: add workaround for pcie errata A-009859
2a3af68 - ls1021a: add workaround for pcie erratum A-007997 and A-007815
0016a4d - LS1043ardb: Change value of boot Hold-off to 1 for secure boot
1dc888a - ls1021a: qspi_boot: Update u-boot address according to DASH memory mapping
0fc4e54 - SECURE_BOOT: Update u-boot hdr address as per DASH memory map
7e0d447 - ls1046ardb: increase FMan and platform frequency
bb0b497 - ls1021a: Fix QSPI endian issue for QSPI boot on LS1021A boards
5933d84 - ls1043a: Fix QSPI endian issue for QSPI boot on LS1043AQDS
29795c2 - ls1046a: fix PBI of changing QSPI endianness
3d44b7c - ls1043ardb: adds a RCW with GIC 4K supported
12eed09 - ls1043a: Add PBI of changing GIC offset to 4K
feb2eb8 - Add a tclsh script to swap the rcw endian.
6b06c8b - ls1046aqds: Add RCW for ls1046aqds board
5a78426 - ls1046ardb: Add RCW for ls1046ardb board
a1368d1 - arm: ls1021a: add the core frequency to 1.2GHZ support
3ccb308 - t2080rdb: update SRDS2PLL2CR1 to 0x08004100 for errata A-007186
e7e5eef - Update license to BSD
f57329a - update End-User License Agreement
4e64170 - ls1043aqds: revise the description of SERDES1 Protocol 0x3358
d0a2fc3 - ls1043aqds: add SATA support under QSPI boot
3825e4a - ls1021a/ls1043a: byte_swap: should 8 byte alignment
13a13e5 - ls1021a: remove the unnecessary PBI
3b93f86 - ls1043aqds: Clear SerDes RxBoost on lane D
893fff9 - LS1043a-RDB: Add RCW files for UEFI bootloader
f34fb1b - ls1043ardb: SECURE_BOOT- RCW added
ef46e48 - qe-tdm: add qe-tdm support on ls1043ardb
b337f1a - ls1043ardb: Add RCW for ls1043ardb board
f9207c5 - ls1043aqds: Add RCW for ls1043aqds board
*update md5 checksum
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
f00e7ef - Adding smc function SIP_HW_UNQ_KEY_32.
c87863a - Fixing usage of _check_sec_disabled().
d0ec59c - Fix for PLATSEC-437 & PLATSEC-457.
926fb97 - Adding smc function (SIP_ALLOW_L2_CLR_32) to allow clearing of L2 memory errs.
781d7b5 - Fixing broken build of LS1043, LS1012.
7289e86 - Adding smc function SIP_ALLOW_L1L2_ERR_32; Added test for SPD interface.
8804017 - Providing very fast-path for SMCC_ARCH_WORKAROUND_1
e9dfa28 - Moved _soc_check_sec_enabled() to _check_sec_disabled(); Fixed conflicting defs in LX2160 soc.h.
474b797 - Changing LX2160 cluster 3 handling from RCW frequency-based to RCW[850] selectable.
f56bd49 - fuse: Correct OTPMK value mapping to OTPMK registers
cf55298 - Upgrading interface to SMC v1.1
ae458e4 - Fixing stack usage on vector entry.
bb56df5 - Breaking the dependency between isolation macros on EL3 entry/exit.
2ca6e68 - Updating Release Notes with recent changes.
6a409e1 - fsl_sec: Add a timer while polling for hw job ring
9e2e5ef - Disabling CCN-508 init during emulation testing of LX2160.
6c3f455 - Resolving overlapping defs in lsch3.h and multiple soc.h files.
b8dcbbd - Fix build rdb all error
a1d81e8 - fuse: Take care of errata: ERR006879 while programming
ed1abaa - Fixing the broken PPA after SPECTRE Fix, in case of spd enable.
ec1d1f2 - Removing tlbi alle2 from EL3-secure code (causes exception).
2cb8430 - Adding platform-frwy to LS1012.
af62fce - Fixing LX2160 build; Removing rdb from supported LX2160 platforms.
e2445c1 - Add implementation of provision_fuses api
d43f8ab - Add SFP driver framework for fuse provisioning
4ae699a - Adding plat.h to sim builds.
8f12a56 - Add support in gen_its to include fuse script in fit image
446362a - Updating LX2160 test code with changes from latest LX2160 bootrom.
2d98f63 - Generating the OP-TEE Secure Storage Key (SSK) on receiving SMC from OPTEE in PPA, by using CAAM H/W block.
b9ad77f - LX2160 cluster 3 handling based on platform clock.
2295e6b - Adding CCN-508 initialization; Adding platform-emu to LX2160.
91e174f - Adding isolation code on entry/exit to EL3 for Spectre mitigation.
a516af0 - Adding prefetch disable of A53 cores to smc function SIP_PREFETCH_DISABLE_64.
52a32aa - Changing file mode for gen_spd_its.
a0e0479 - QPPA-34 Fix to resolve the 4.4 Kernel 32bit bootup issue.
3107360 - Initializing TZASC after EL3 cache maint ops; Setting OCRAM to secure access only when EL3 stacks are in OCRAM.
db509c5 - Initializing smc global data region;Making data-in-ocram the default.
48ccba3 - Cleaning up code fix for QLINUX-8590.
c1e2177 - Bringing TZASC Enablement under CONFIG_SPD compile time flag.
fac778a - Enable LPM20 on LS2088A
5be38ad - Fix for ls1026ardb/ls1023ardb board boot up issue on dash-lts 4.9 kernel. JIRA Ticket QLINUX-8590
eb40915 - Adding support for LS1012 Freedom board.
833f749 - Fix for launching 32-bit kernel when OpTee is loaded.
75e9909 - Added TZC-380 & TZC-400 drivers for LS1043 and LS1046.
f2eecde - Add proper checking for Trusted-OS vector-table.
24ecac4 - Enable PSCI-CPU-ON notification for trusted-OS.
a9a6f4d - Fix in SPD for Coverity issues in TX1.0 release.
b2979b5 - Disabling and re-enabling SEC on entry/exit to LPM20 on LS1088.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following change:
a631182 warp7: update defconfig to support the generic loading interface
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Without this, bitbake use the default one, and not "u-boot-fslc-fw-utils".
This was observed when layer is used together with poky (with Mender).
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This pkg will not be supported anymore
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*This pkg will not be supported anymore.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*ppa build support OPTEE-OS parameter.
*Building PPA source with OPTEE-OS
*add ppa-optee recipes
*update to e564143
e564143 - Adding 'execute' bit to gen_spd_its file mode
a0e0479 - QPPA-34 Fix to resolve the 4.4 Kernel 32bit bootup issue.
3107360 - Initializing TZASC after EL3 cache maint ops; Setting OCRAM to secure access only when EL3 stacks are in OCRAM.
db509c5 - Initializing smc global data region;Making data-in-ocram the default.
48ccba3 - Cleaning up code fix for QLINUX-8590.
c1e2177 - Bringing TZASC Enablement under CONFIG_SPD compile time flag.
fac778a - Enable LPM20 on LS2088A
5be38ad - Fix for ls1026ardb/ls1023ardb board boot up issue on dash-lts 4.9 kernel. JIRA Ticket QLINUX-8590
eb40915 - Adding support for LS1012 Freedom board.
833f749 - Fix for launching 32-bit kernel when OpTee is loaded.
75e9909 - Added TZC-380 & TZC-400 drivers for LS1043 and LS1046.
f2eecde - Add proper checking for Trusted-OS vector-table.
24ecac4 - Enable PSCI-CPU-ON notification for trusted-OS.
a9a6f4d - Fix in SPD for Coverity issues in TX1.0 release.
b2979b5 - Disabling and re-enabling SEC on entry/exit to LPM20 on LS1088.
b31c991 - Fix defect inserted into _zeroize_bss() during last commit.
3f83fd1 - Changed name of ddr/spd.c to spd_ddr.c to prevent filename collision with spd/spd.c.
59acbe2 - Fixing LSCH macro usage in timer.c.
030a2d7 - Adding SD/eMMC driver.
46016e6 - Added functions _getGICC_BaseAddr() and _getGICD_BaseAddr() to ls1012.
1f804e6 - Fixed handling of ls1043/ls1046 gic base address.
7e8df4f - Supplying the start address to _relocate_rela() and _zeroize_bss() functions.
dc36a4e - Resequencing the startup code for ddr and non-ddr builds. Fixed handling of input parameters to _ppa_main().
52f6c8b - Cleanup monitor code.
bdd2e61 - Adding temporary stack to bootcore before ppa_main() is called.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|