Age | Commit message (Collapse) | Author |
|
libfslcodec/ libfslvpuwrap/ libfslparser/ fsl-alsa-plugins have been
renamed as imx-codec/ imx-vpuwrap/ imx-parser/ imx-alsa-plugins, need to
do update.
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
gstreamer1.0-plugins-imx was recently updated to be compatible with mx7
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Some device trees are only needed for reva board
The following are reva device trees
imx7d-sdb-reva.dtb imx7d-sdb-reva-epdc.dtb imx7d-sdb-reva-gpmi-weim.dtb
imx7d-sdb-reva-hdmi-audio.dtb imx7d-sdb-reva-m4.dtb imx7d-sdb-reva-qspi.dtb
imx7d-sdb-reva-touch.dtb imx7d-sdb-reva-wm8960.dtb
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
imx6dlsabresd: Remove imx6dl-sabresd-pf200.dtb
imx6slevk: Remove imx6sl-evk-pf200.dtb
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
ARM: dts: imx6qdl-sabreauto: add enet irq dts files to avoid conflict with MLB
ENET gpio irq pin conlict with MLB on i.MX6qdl sabreauto board, since enet
gpio irq is extended feature for performance improvement, so let MLB enable
in default dts file and newly create sabreauto enet irq dts files.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The FSLC kernel fork has been updated for the 3.14-1.52-1.1.0 GA
release. It is a consolidated release covering all i.MX active product
lines covering:
- i.MX6QDL
- i.MX6SL
- i.MX6SX
- i.MX6UL
- i.MX7D
The patch also updates the linux-fslc-imx-rt flavour for the very same
kernel fork and ensures people uses the built-in Vivante GPU driver,
when using the Linux RT support, as the external kernel module does
not support it yet.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
MLK-11526-1 ARM: dts: add imx6qp sabresd board support
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
i.MX 7Dual supports epdc hardware so add epdc boot configuration
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add Murata Type ZP (BCM4339) module support on below platforms:
- i.MX6UL SDB RevC (SD1 slot) + Murata adapter V2.0
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
MLK-11130: ARM: dts: add mqs support mx6sx-sd-exp1 board
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add Murata Type ZP (BCM4339) module support on below platforms:
- i.MX6SX SDB (SD3+SD2 slot) + Murata adapter V1.0 & SD EXT card
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add Murata Type ZP (BCM4339) module support on below platforms:
- i.MX6SL EVK (SD1+SD3 slot) + Murata adapter V1.0 & SD EXT card
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
SoloLite has epdc hardware configuration which is enabled by both uboot
and firmware.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add Murata Type ZP (BCM4339) module support on below platforms:
- i.MX6Q/DL/QP SabreSD(SD2 slot) + Murata adapter V2.0
Note: MX6Q/DL/QP SabreSD board requires HW rework.
Please refer to rework guide specified in schematic.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add Murata Type ZP (BCM4339) module support on below platforms:
- i.MX6Q/DL/QP SabreSD(SD2 slot) + Murata adapter V2.0
Note: MX6Q/DL/QP SabreSD board requires HW rework.
Please refer to rework guide specified in schematic.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The IMAGE_FSTYPES need to be overriden without using the SoC family
overrides, for user-friendness, and to allow this we need to use a SoC
variable to construct the default value for setting.
Related to [YOCTO: #8945].
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
As i.MX6UL has been changed out of mx6 SOC family, it need set UBOOT_ENTRYPOINT
Signed-off-by: Jun Zhu <junzhu@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
With the use of the new DCU DRM driver we can make use of the
X-servers modesetting DDX driver. The driver uses directly the
DRM/KMS interface.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
QSPI and IFC are both supported in SD boot. Build two SD boot images,
one supports IFC; the other supports QSPI.
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
imx-vpu is machine specific due to #define macros for the type of i.MX6
SoC (quad, duallite ..)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The DirectFB project is dead upstream for a while and the backend is
deprecated so it is better to drop it and avoid new users to depend on
it and instead to focus in the current technologies for new projects.
This commit removes everything related to the DirectFB support so if
someone wish to revert it locally it can be easily done.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the default Kernel to the linux-fslc 4.1 kernel.
What seems to work:
- UART
- CPU/Memory (obviously) and L2 Cache
- ARM global timer as clock source
- Pinctrl/GPIO support
- SD-Card
- USB Host (according to bootlog, not tested)
- SoC internal RTC (SNVS RTC)
- Watchdog
Not tested, but should be working:
- Audio using SGTL5000 connected via SAI (hardware not available)
- DCU Framebuffer device (hardware not available)
- Ethernet PHYs (not sure, might be a hardware issue)
Known to be missing:
- Spansion Flash S25FL128S connected via QuadSPI
- MCC v1 and v2
- Touchscreen with TWR-LCD-RGB (according to Tony)
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
At first, this machine was supported only by u-boot-imx U-Boot provider, however
as soon as u-boot-fslc included this support, the U-Boot provider was changed.
During the change of default U-Boot provider, the SPL configuration end up being
missed.
The needed SPL configuration is set up in this patch.
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
All Vybrid SoC's use the Cortex-A5 CPU. Add an appropriate default
tune for the vf SoC.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The O.S. Systems Embedded Linux provides an alternative version of
U-Boot and, for completeness, an alternative recipe for
u-boot-mxsboot-native.
The provider, in imx-base.inc, had no default thus raising a
warning. This turns the u-boot-fslc-mxsboot-native as the default
provider but allows custom distributions to override it.
Change-Id: I46799f9ec744a074d95c383561cf0cbddb26e151
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT needs to be expanded and
cannot have a default overriden later, otherwise it does not respect
the default set in the SoC.
Change-Id: I1d90d173603e6ee258f3e05c7a53e576b3b1f552
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot 2015.10 adds support for the i.MX7 so we can use it instead
of Freescale fork, preferring the mainline code.
Change-Id: Ib375f8aa10a482b631eb99d7b5eb86866c87351e
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot 2015.10 adds support for the i.MX6 UltraLite so we can use
it instead of Freescale fork, preferring the mainline code.
Change-Id: I5dc770bcecd14120b5478b67d9a47eebfc834300
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 'ext4' filesystem is automatically included as dependency of the
SDCard image, so we can avoid this duplication in the IMAGE_FSTYPES
variable.
Change-Id: I235e2478845a4e394bbacd42d2e6e8170d1d4ce0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The consolidation of all i.MX related base settings allows a more
global view of the settings in place.
One of the reasons for this patch is the fragmentation caused by
i.MX23 and i.MX28 SoCs using mxs-base.inc.
The changes needed to get i.MX23 and i.MX28 SoCs working have been
included in imx-base.inc file already and some values required rework
to apply to specific SoC families to avoid regressions.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The ext4 is now the default for images in OpenEmbedded-Core, we now
follow this change for all i.MX reference boards.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Replace .sdcard image to sdcard.gz image as a default image type for
all machines.
The SDCard class has the feature of compress the generated .sdcard image.
It can be used to ease the exchange of this image among developers or machines.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The tar.bz2 is useful for people using NFS or generating the SD card
image byhand, those can enable this in the board file or in the
local.conf when needed. By default the SD card image should be the
only image built as it is the most commonly used one for initial
development.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The default value for IMAGE_FSTYPES including SDCard class enable all
machine to work out of the box using the .sdcard image.
The removed duplication affected the following machines:
- imx23evk
- imx28evk
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The linux-imx.inc based kernels now can dynamically provide the
Vivante kernel driver and satisfy the runtime dependency added for the
Vivante GPU user space libraries. The beauty of this solution is that
it makes ease for 3rd party kernel to reuse the same infrastructure
and use the external module easily.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
FILESPATH is in part built by using MACHINEOVERRIDES and the path
is built working right to left. Use =. instead of .= to prepend
(e6500-64b:qoriq-ppc) to (soc:board).
Take t2080rdb-64b as example, change from:
FILESOVERRIDES="powerpc64:t2:t2080:t2080rdb-64b:qoriq-ppc:e6500-64b:poky"
MACHINEOVERRIDES="t2:t2080:t2080rdb-64b:qoriq-ppc:e6500-64b"
To:
FILESOVERRIDES="powerpc64:e6500-64b:qoriq-ppc:t2:t2080:t2080rdb-64b:poky"
MACHINEOVERRIDES="e6500-64b:qoriq-ppc:t2:t2080:t2080rdb-64b"
Signed-off-by: Ting Liu <ting.liu@freescale.com>
|
|
EPDC firmware was previously in kernel and is being moved to support
conditional installs based on hardware that supports it.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|