Age | Commit message (Collapse) | Author |
|
When the use-mainline-bsp is used, dtb files listed in KERNEL_DEVICETREE
are different from ones to be build, so the build fails. This patch fixes
it by adding KERNEL_DEVICETREE_use_mainline_bsp.
Signed-off-by: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change description fields from Freescale to NXP in machine files to align to
2016 corporate transfer to NXP.
Signed-off-by: Alexandra Safta <alexandra-ioana.safta@nxp.com>
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SOC_FAMILY is an indirection which makes the understanding, from
OpenEmbedded versed developers and users, more difficult. Instead of
using the SOC_FAMILY indirection which is rarely used, we now move to
the MACHINEOVERRIDES mechanism as this is in fact what is in use.
Change-Id: Ic6e58b79bdc990ac853c87761c3fff635786e4e5
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This machine has the ZP_BCM4339 chip, so install the firmware by default.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Booting a NXP kernel with mainline U-boot leads to the following
kernel crash:
,----
| caam: probe of 30900000.caam failed with error -11
| Unable to handle kernel NULL pointer dereference at virtual address 00000004
| pgd = 80004000
| [00000004] *pgd=00000000
| Internal error: Oops: 805 [#1] PREEMPT SMP ARM
`----
This happens because NXP kernel expects MX7 to boot in secure mode,
so introduce mx7dsabresd_secure_defconfig that selects CONFIG_MX7_SEC
and allows booting a NXP provided kernel successfully.
Change-Id: Ic05912c1328c75e8e25c89e7543b67c8c214e20d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Some device trees are only needed for reva board
The following are reva device trees
imx7d-sdb-reva.dtb imx7d-sdb-reva-epdc.dtb imx7d-sdb-reva-gpmi-weim.dtb
imx7d-sdb-reva-hdmi-audio.dtb imx7d-sdb-reva-m4.dtb imx7d-sdb-reva-qspi.dtb
imx7d-sdb-reva-touch.dtb imx7d-sdb-reva-wm8960.dtb
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
i.MX 7Dual supports epdc hardware so add epdc boot configuration
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot 2015.10 adds support for the i.MX7 so we can use it instead
of Freescale fork, preferring the mainline code.
Change-Id: Ib375f8aa10a482b631eb99d7b5eb86866c87351e
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add an new dts file: imx7d-sdb-touch.dts.This file adds tsc2046 touch
screen controller support. Due to the pin PENIRQ of tsc2046 is conflict
with the interrupt pin of HDMI, so in this patch, disable the HDMI.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add the SIM1 device tree support on i.MX 7D SABRE SD
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Create i.MX 7Dual SABRE Smart Device with device tree support for
enet, epdc, gpmi-weim, hdmi-audio, m4, qspi and wm8960 configurations.
Create U-Boot support for sdcard, qspi, nand and mfgtool configurations.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|