Age | Commit message (Collapse) | Author |
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
Detailed commit log can be found at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/qemu.git/log/?h=sdk-v2.0.x
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
fsl-kernel-localversion added a separate task in which defconfig
is needed. But qoriq boards don't have a unified defconfig, different
KERNEL_DEFCONFIG should be copied as ${WORKDIR}/defconfig.
add a merge_delta_config task to merge kernel delta configs.
for ls1043ardb and ls2080ardb, freescale.config should be appended first.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
The main features are:
* Linux kernel 4.1.8
* ARM A7 (AARCH32), A53 and A57 (AARCH64), Little Endian (default)
* Power Architecture e500mc, e5500, e6500
* Multicore SMP support and multithread (e6500)
* 32-bit effective kernel addressing [e500mc, e5500, A57]
* 64-bit effective addressing [e6500, A53, A57]
* Huge Pages (hugetlbfs)
* Linux Real-Time (RT) [P4080, B4860, LS1021A]
* Kernel-based Virtual Machine (KVM)
* Libvirt 1.2.19
* Linux Containers (LXC) 1.1.4 function support
Detailed commit log can be found at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/linux.git/log/?h=sdk-v2.0.x
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
No code change.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
|
|
Select CONFIG_SND_SIMPLE_CARD driver by default.
warp7 board needs this driver for audio to work.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following changes:
59b38c32 ARM: dts: imx7s-warp: Enable BT_REG_ON
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following changes:
ae973bc warp7: Select secure boot
b66cb5f warp7: Modify fdt_file environment variable
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.29 stable release onto the fork and the following changes:
b8fb01d ARM: dts: imx7s-warp: Add Wifi support
fe8d662 ARM: dts: imx7s-warp: Move memory node
07c4014 ARM: dts: imx7s-warp: Enable crypto
51bca3b ARM: dts: warp7: Rename the dts file
8eaed11 ARM: imx_v7_defconfig: Add simple card driver support
a2d0fba sgtl5000.c: HACK, defer probe when I2C not yet running
12ecd0e ARM: dts: imx7d-warp: Add audio support
a0fa08d ARM: dts: imx7d: Add #sound-dai-cells into sai nodes
a0f8868 ARM: dts: imx7d-warp: Add BC3770 support.
0d4b750 ARM: dts: imx7d-warp: Enable bluetooth device
4cc7e24 ARM: dts: imx7d-warp: Add User Button support
ace4c64 ARM: dts: imx7d-warp: Add NFC support
d237364 ARM: dts: imx7d-warp: Add support for precision altimeter
f9dbcc8 ARM: dts: imx7d-warp: Add support for accelerometer and magnetometer
ccdf497 ARM: dts: imx7d-warp: Add I2C4 device node, princtrl
ba38303 Merge tag 'v4.1.29' into 4.1-1.0.x-imx
c3ed55b Linux 4.1.29
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Create directory ${B} before do_preconfigure task creates file ${B}/.config
Fix error:
../fsl-community-bsp/build/tmp/work/imx6slevk-poky-linux-gnueabi/linux-fslc-imx/
4.1-1.0.x+gitAUTOINC+0c0844f9fa-r0/temp/run.do_preconfigure.16220:
line 109: ../fsl-community-bsp/build/tmp/work/imx6slevk-poky-linux-gnueabi/
linux-fslc-imx/4.1-1.0.x+gitAUTOINC+0c0844f9fa-r0/build/.config:
No such file or directory
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backport following changes from upcoming 2016.09 release:
16a2670 arm: imx: Add support for Advantech DMS-BA16 board
b5e61c4 mx7dsabresd: Print secure/non-secure mode info
28830fe mtd: nand: mxs: fix cache alignment for cache lines >32
Change-Id: I332effe171f58f814f5f525e835b22f6e54e5601
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backport following changes from upcoming 2016.09 release:
e38d99f MAINTAINERS: i.MX: Add board/freescale/*mx* path
aad9e75 mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig
c40981b mx7_common: initialize generic timer on all CPU's
bb7dbb1 mx6ul_14x14_evk: Remove unused define
1f89a59 cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE
5433e5c novena: Remove uneeded PHYS_SDRAM_SIZE
97145ad bx50v3: Use imx_ddr_size() for calculating the DDR size
557c86a aristainetos: Use imx_ddr_size() for calculating the DDR size
f2ff911 warp: Use imx_ddr_size() for calculating the DDR size
7b53769 warp7: Move some USB configuration options to defconfig
bc7bbb5 colibri_imx7: add Colibri iMX7S/iMX7D module support
c2381c0 cgtqmx6eval: Replace is_mx6q() for macro
9280131 mx6cuboxi: Replace is_mx6q() for macro
5396047 wandboard: Replace is_cpu_type() for macro
ccbd486 imx: ventana: add dt fixup for watchdog external reset
6da2a41 imx: ventana: refactor board-specific dt fixups (no functional change)
f13197c imx: ventana: make hwconfig initialize based on board configuration
505d466 imx: ventana: add extra DIO's for GW5520
ede70ae imx: ventana: make number of digital I/O's dynamic
85327cb imx: ventana: make RS232 enable board specific
67d376a imx: ventana: re-enable late board info display
1f71a76 imx: ventana: default pci to disabled
71fbd29 pci: allow disabling of pci init/enum via env
e315991 imx: ventana: add dt fixup for eth1 mac-address
c8bfa71 imx: ventana: add dt fixup for GW16082 irq mapping
6308105 mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT
6eae48f pico-imx6ul: drop warning due to redefined
c5502fb mx6: wandboard: fix warning due to missing prototype
a9fef43 Fix build for mx7dsabresd (secure config)
Change-Id: I1fa2a8a4db9d265494831deef53a11633faf3454
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
If DISTRO_FEATURES contains x11 and wayland, configure the package
for a Wayland backend.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
6SoloLite
The i.MX 6SoloLite has no 3D support, so don't build glmark2 with OpenGL
ES 2.0 support.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The gstreamer1.0-plugins-imx-imxg2d has the dependency satisfied by
the GPU driver, which is already listed as dependency. This marks the
warning as a false-positive.
Fixes:
,----
| WARNING: QA Issue: /usr/lib/gstreamer-1.0/libgstimxg2d.so_gstreamer1.0-plugins-imx-imxg2d
| contained in package gstreamer1.0-plugins-imx-imxg2d requires
| libg2d.so.0.9, but no providers found in its RDEPENDS [file-rdeps]
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changes:
* imxv4l2videosrc:
* Stricter checks for video device capabilities
* Add support for more video formats like 8/16-bit grayscale
* pxp: Fix incorrect return code which broke blitter with GStreamer 1.8
* blitter:
* Improvements in error logging
* Fixes for RGBx framebuffer format detection
* Fix for subtle tearing problem by implementing triple buffering
* audio:
* Replace objdump-based scan during build configuration
Codec filenames are instead moved to the C code; the libdir
path of the libfslaudiocodec.pc file is used to know where on
the target the files are placed
* Explicitely add the libfslaudiocodec.pc libdir to the MP3 encoder
Fixes build errors in buildroot
* Minor logging fixes
* misc:
* Proper check for region copies in phys_mem_meta
* Add missing G_END_DECLS lines in headers
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following change:
- 0c0844f 4.1.28 Fix bad backport of 8f182270dfec "mm/swap.c: flush lru
pvecs on compound page arrival"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 9da4a42 Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
- 7be8ff4 serial_mxc: Remove unconditional DCE setting
- 6dec211 mx6: clock: Fix the logic for reading axi_alt_sel
- 68f2c3e Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite"
- 2fd99ea imx_watchdog: add weak attribute to reset_cpu function
- c782384 mx7_common: use Kconfig for ARMv7 non-secure mode
- b8cc70e mx7_common: Put display board info config into board file
- 72a9967 mx7: set soc environment according to exact SoC type
- ff3ecc4 usb: ehci-mx6: introduce config for high active power pin
- 97488b5 usb: ehci-mx6: configure power polarity in usb_power_config
- ce0c796 usb: move CONFIG_USB_EHCI_MX7 to Kconfig
- e22ac58 dm: imx: serial: Support DTE mode when using driver model
- 65db95b warp7: Remove CONFIG_BOOTDELAY variable
- 1231d04 ARM: configs: cm_fx6: add mtd support
- 14619b5 ARM: board: cm_fx6: fixup mtd partitions in the fdt
- 9fa3af0 fdt_support: define stub for fdt_fixup_mtdparts
- f1a2b56 ARM: configs: cm_fx6: improve default environment
- d1e28f0 pico-imx6ul: Add PMIC support
- 292806e wandboard: move environment partition farther from u-boot.img
- 8b5df31 Revert conversion for config_distro_bootcmd.h
- 9222180 Merge pull request #11 from Kynetics/2016.07+fslc
- 1207b97 warp: Change default bootenv configuratio
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add function to check if kernel support raw_mode and fix function that
calculates the geometry based on known info from the mtd partitionmtd
geometry.
These patches were copied from:
https://github.com/Gateworks/openwrt/commit/379e87df4fb67198fe900ffe2a394e69fbd47801
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The i.MX23 and i.MX28 image stream must be built prior the sdcard
generation. The example of a failure is:
,----
| DEBUG: Executing shell function do_image_sdcard
| 0+0 records in
| 0+0 records out
| 0 bytes (0 B) copied, 1.5848e-05 s, 0.0 kB/s
| dd: failed to open '....rootfs.uboot.mxsboot-sdcard': No such file or directory
| WARNING: exit code 1 from a shell command.
`----
The failure has been found by O.S. Systems autobuilder when running
the regression tests.
Change-Id: I64ecca1160e038e15629516f97e8ade5d645be31
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Instead of resetting the sdcard dependencies, we append them. This
allow those to be set before class inherit.
Change-Id: I588a549abfe756fea38d0133c5c21ef06dfcb230
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It is simple to do it in hv-cfg recipe.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changelog:
348748b update device trees to increase the number of FQDs available
ba627ef t4240qds: add some missing fman ports
4da1b35 experimental: update to match latest device tree
f23fe58 b4860qds: update to match latest device tree
70e01ec t4240: update to match latest device tree
bb7fd45 t2080: update to match latest device tree
5c2af25 t1042rdb: update to match latest device tree
4ad3b4e t1040: update to match latest device tree
7d82eca t1024: update to match latest device tree
a921799 p5040ds: update to match latest device tree
7b27495 p5020ds: update to match latest device tree
c2bdb6c p4080ds: update to match latest device tree
027388f p3041ds: update to match latest device tree
3ac3990 p2041rdb: update to match latest device tree
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
u-boot has switched to the new UBOOT_CONFIG format. These variables
are useless now.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
U-Boot will compile its own tools during the build, with specific
configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools
require openssl. This patch adds 'openssl' as a PACKAGECONFIG that
enables the use of openssl-native as a dependency and also adds the
HOSTCC flags that U-Boot uses when compiling the host tools.
(From OE-Core rev: 7d0edf5d04fba0b642bfb08a1de28fbc8e480209)
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
SDK_VERSION defaults to nodistro.0 which is not expected in
this recipe.
Also adjust the location of some settings, no code change.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
By using the new UBOOT_CONFIG format, the final u-boot binary will be
configured in machine config file, and will be processed in upstream
u-boot.inc.
Remove the codes to copy final u-boot binary, and append the special
steps which need boot-format/byte_swap tool to regenerate the binary.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The main features are:
* Upgrade to 2016.01
* On ARM platforms, the U-Boot image includes the device tree
* Non-secure and Secure Boot (ESBC)
* Primary Protected Application (PPA) firmware integration [LS1043A]
* Clock, CPLD, DUART, DDR3, DDR4, DSPI, eSDHC, GIC-400, GIC-500, I2C, OCRAM, PCIe, USB 2 & 3, SATA, UART
* Networking support using eTSEC, FMAN Independent Mode or DPAA2 networking
* DCU, eMMC 4.5, I2C3, LPUART, QSPI [LS1021A]
* eLBC and IFC access to NOR and NAND flash
* Boot from NOR, NAND flash, eSPI, SDHC
* Boot from SRIO [B4860, P5020, P4080]
* Voltage ID (board specific)
* CodeWarrior debug patch for U-Boot
Detailed commit log can be found at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/log/?h=sdk-v2.0.x
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The LS1043A Reference Design Board (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043ARDB provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.
The LS1043A integrated multicore processor combines four ARM Cortex-A53
processor cores with datapath acceleration optimized for L2/3 packet
processing, single pass security offload and robust traffic management
and quality of service.
For detailed info, please visit:
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-arm-processors/qoriq-ls1043a-reference-design-board:LS1043A-RDB
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The LS2080A Reference Design (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
The LS2080A integrated multicore processor combines eight ARM Cortex-A57
processor cores with high-performance data path acceleration logic and network
and peripheral bus interfaces required for networking, telecom/datacom,
wireless infrastructure, and mil/aerospace applications.
For detailed info, please visit:
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-arm-processors/qoriq-ls2080a-rdb-reference-design-board:LS2080A-RDB
Signed-off-by: Zongchun Yu <zongchun.yu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
* use += to append, instead of ?=
* udev-rules-qoriq is not needed for all the qoriq boards, remove it.
* add udev-extraconf and kernel-modules.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
move KERNEL_IMAGETYPE setting from qoriq-base.inc as qoriq-arm64
has a different value.
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|