| Age | Commit message (Collapse) | Author |
|---|
|
Fixes error:
URL: git://github.com/hashicorp/consul-migrate.git;branch=master uses
git protocol which is no longer supported by github.
Please change to ;protocol=https in the url.
when running bitbake with the meta-cloud-services layer.
Signed-off-by: Anne Macedo <retpolanne@posteo.net>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
github is removing git:// access, and fetches will start
experiencing interruptions in service, and eventually will fail completely.
bitbake will also begin to warn on github src_uri's that don't use
https. So we convert the meta-virt instances to use protocol=https
(done using the oe-core contrib conversion script)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
As introduced in the oe-core post:
https://lists.openembedded.org/g/openembedded-core/message/157623
SRC_URIs without an explicit branch will generate warnings, and
eventually be an error.
We run the provided conversion script to make sure that meta-virt
is ready for the change.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Consul has switched from master to main for development, we add an
explicit branch statement, since the default of master no longer
works.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
With the latest go version bump in oe-core export GO111MODULE is
on by default. Our build is not setup to use go modules, so we
disable it and avoid configuration errors.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Hopefully no one is using these exit hooks anymore, since dhcp
is no longer in oe-core, this bbappend is dangling. The replacement
to dhcp doesn't support the same hooks, so we drop everything and
see if anyone notices.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Serf is a decentralized solution for service discovery and orchestration that
is lightweight, highly available, and fault tolerant.
Vendor licenses are included in serf-vendor-licenses.inc, to make
the main recipe shorter/easier to read.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
While go was upgraded to 1.13, there is a do_compile failure,
Refer upstream envoyproxy to rename imports throughout
https://github.com/envoyproxy/protoc-gen-validate/pull/161/commits/7428b5f8e7fdabbcc7c9710e23e6f438ba4ff021
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
The systemd service needs to be tuned according to various use cases and cannot
be able to always start successfully for example when there is no network
interface named br0 by default.
Thus the default configuration is mainly used as an example. Let's not
automatically start it on boot.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
1.6.0 is the latest release.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
We are currently seeing the following error:
type..eUfRrckI: missing section for relocation target type..FEeY9FdU
...
This is similar to the reported issues
http://www.lyddzz.com/github_/golang/go/issues/30768
and
https://github.com/hashicorp/consul/issues/5486 (but this one appears
to be a report of 'our' issue so isn't really valid)
The go.bbclass currently completes 2 builds (if GO_DYNLINK is set),
one without '-linkshared' and one with. The '--linkshared' option is
marked as experimental (https://golang.org/cmd/link/ -- "-linkshared
Link against installed Go shared libraries (experimental)").
By setting GO_LINKSHARED prior to inheriting go.bbclass we can
overwrite the default compile behavior and only perform the build
without the '-linkshared' option. This shouldn't change the
functionality of consul and we can revert to the default behavior when
the issues have been addressed.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Add the default route option for the operation of adding route,
while we set the static route and the mask setting is 0.
For example:
add_routes 32 169 254 169 254 10 209 67 4 0 10 209 67 1
The first route (169.254.169.254/32 via 10.209.67.4) is added successfully,
but the second route (10.209.67.1, default) is not added at all.
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Uprev to v1.4.3 and remove invalid patch.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Use COMPATIBLE_HOST to prevent building for mipsarch.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
1. for i586, bitbake consul will have QA error of textrel.
consul-git-r0 do_package_qa: QA Issue: ELF binary i
'work/i586-wrs-linux/consul/git-r0/packages-split/consul/usr/bin/consul'
has relocations in .text [textrel]
according to go doc:
-buildmode=pie
Build the listed main packages and everything they import into
position independent executables (PIE). Packages not named
main are ignored.
checked use command "eu-findtextrel ./consul", functions not
compiled with -fpic/-fPIC are from packages not named main, and
also not imported into package main.
so -buildmode=pie cannot reslove this problem. so refer commit
b689c72a of oe-core, just skip it.
2. This problem is caused since security_flags.inc is used by default.
so alternative work around is:
SECURITY_CFLAGS_pn-consul = "${SECURITY_NOPIE_CFLAGS}"
SECURITY_LDFLAGS_pn-consul = ""
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
We do not want meta-cloud-services to depend on meta-overc so we
switch to use the go.bbclass which is now part of oe-core/yocto. We
also capture all the licenses for all source packages which are
included in consul-migrate and adjust paths to account for the
different handling of go.bbclass vs. golang.bbclass.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
It is common to have two GO packages, A and B, and they both depend on
a GO dependency, C. This can be satisfied using the current technique
of writing recipes for each dependency.
BUT it is also common for GO packages to not only specify other
packages in their GoDeps but also specific dependency versions. In the
case that A and B share a dependency on C, but require different
versions, there is no easy way to accomplish this using recipes.
Since GO dependencies are also source dependencies and these
dependencies are overwhelmingly useless on their own, writing recipes
for each is overkill.
We therefor replace DEPENDS with SRC_URIs and SRCREVs as a mechanism
to provide build dependencies.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
We don't want meta-cloud-services to have to rely on meta-overc for
access to golang.bbclass (which predates go.bbclass in oe-core/yocto)
so switch to make use of go.bbclass.
This requires the definition of GO_IMPORT and the dropping of some
custom handling of 'configure' and others.
Since go.bbclass uses a slighly different directory structure than we
used with golang.bbclass we have to adjust some paths accordingly,
including those in patches.
We also need to expand the list of LICENSES to cover licenses of all
the GO packages included in consul.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
GO package dependencies are a tricky beast. They are source
dependencies and if you have two packages which share a dependency
they could very well require different versions of the dependency. So
supplying the dependencies via bitbake recipes is not an easy
proposition. As such we are better off populating the build source
with the dependencies using SRC_URIs and not traditional DEPENDS.
That being said, the consul source repository actually includes copies
of the dependencies (and the dependency's dependencies) so having
these DEPENDS is actually useless and we can simply drop them.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
After several requests to make the consul recipe available outside of
meta-overc and the OverC framework we are moving the consul recipes
here. These are a copy from meta-overc (HEAD 6afe8d2c12ac).
NOTE that not all the DEPENDS have been copied as we will follow this
commit with work to make use of SRC_URIs for dependencies. See the
associated commit(s) which will follow this one.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Fix the following warning:
WARNING: Variable key FILES_${PN}-client (${base_sbindir}/dhclient
${base_sbindir}/dhclient-script ${sysconfdir}/dhcp/dhclient.conf
${base_sbindir}/dhclient-systemd-wrapper) replaces original key
FILES_dhcp-client ( ${sysconfdir}/dhcp/dhclient-exit-hooks).
Signed-off-by: Vu Tran <vu.tran@windriver.com>
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
|
|
dhcp in oe-core has been upgrade to 4.3.2, so the following error will be caught.
ERROR: No recipes available for:
/yocto/meta-cloud-services/recipes-connectivity/dhcp/dhcp_4.3.1.bbappend
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
commit 43e2b093040734d4c4b28db96a634cd2a5f3271b [dhcp: add dhcp
classless static route support] had a flaw in one of
do_install_append() sed expressions in the dhcp recipe that caused a
duplicate 'request' keyword to be inserted in to the dhclient.conf
file. The result was that results returned for the request were not as
expected and the resolv.conf would be empty. Fixing up the sed
expression removes the duplicate and allows things to function
properly.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
dhclient needs to be configured to request classess static
routes (option code 121) from dhcp server. And dhclient-script will call
dhclient-exit-hooks which will parse and add the static routes
received from dhcp server into the routing table.
The support are built into both controller image and usb guest image,
but only guest image makes use of it to add static route for instance to
access metadata.
Signed-off-by: Andy Ning <andy.ning@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
Anne Macedo
Bruce Ashfield
Chen Qi
Tim Orling
hongxu
He Zhe
Mark Asselstine
Zhixiong Chi
Hongzhi.Song
Joe Slater
Changqing Li
Vu Tran
Bian Naimeng
Bruce Ashfield
Andy Ning