diff options
Diffstat (limited to 'meta-openstack/recipes-extended')
6 files changed, 141 insertions, 0 deletions
diff --git a/meta-openstack/recipes-extended/libpam/files/common-account b/meta-openstack/recipes-extended/libpam/files/common-account new file mode 100644 index 00000000..66cc62c1 --- /dev/null +++ b/meta-openstack/recipes-extended/libpam/files/common-account @@ -0,0 +1,26 @@ +# +# /etc/pam.d/common-account - authorization settings common to all services +# +# This file is included from other service-specific PAM config files, +# and should contain a list of the authorization modules that define +# the central access policy for use on the system. The default is to +# only deny service to users whose accounts are expired in /etc/shadow. +# +# As of pam 1.0.1-6, this file is managed by pam-auth-update by default. +# To take advantage of this, it is recommended that you configure any +# local modules either before or after the default block, and use +# pam-auth-update to manage selection of other modules. See +# pam-auth-update(8) for details. +# + +# here are the per-package modules (the "Primary" block) +account [success=1 new_authtok_reqd=done default=ignore] pam_unix.so +# here's the fallback if no module succeeds +account requisite pam_deny.so +# prime the stack with a positive return value if there isn't one already; +# this avoids us returning an error just because nothing sets a success code +# since the modules above will each just jump around +account required pam_permit.so +# and here are more per-package modules (the "Additional" block) +account [success=ok new_authtok_reqd=done ignore=ignore user_unknown=ignore authinfo_unavail=ignore default=bad] pam_ldap.so minimum_uid=1000 +# end of pam-auth-update config diff --git a/meta-openstack/recipes-extended/libpam/files/common-auth b/meta-openstack/recipes-extended/libpam/files/common-auth new file mode 100644 index 00000000..e5b429da --- /dev/null +++ b/meta-openstack/recipes-extended/libpam/files/common-auth @@ -0,0 +1,21 @@ +# +# /etc/pam.d/common-auth - authentication settings common to all services +# +# This file is included from other service-specific PAM config files, +# and should contain a list of the authentication modules that define +# the central authentication scheme for use on the system +# (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the +# traditional Unix authentication mechanisms. + +# here are the per-package modules (the "Primary" block) +auth [success=2 default=ignore] pam_unix.so nullok_secure +auth [success=1 default=ignore] pam_ldap.so minimum_uid=1000 use_first_pass +# here's the fallback if no module succeeds +auth requisite pam_deny.so +# prime the stack with a positive return value if there isn't one already; +# this avoids us returning an error just because nothing sets a success code +# since the modules above will each just jump around +auth required pam_permit.so +# and here are more per-package modules (the "Additional" block) +auth optional pam_cap.so +# end of pam-auth-update config diff --git a/meta-openstack/recipes-extended/libpam/files/common-password b/meta-openstack/recipes-extended/libpam/files/common-password new file mode 100644 index 00000000..f9bbecca --- /dev/null +++ b/meta-openstack/recipes-extended/libpam/files/common-password @@ -0,0 +1,28 @@ +# +# /etc/pam.d/common-password - password-related modules common to all services +# +# This file is included from other service-specific PAM config files, +# and should contain a list of modules that define the services to be +# used to change user passwords. The default is pam_unix. + +# Explanation of pam_unix options: +# +# The "sha512" option enables salted SHA512 passwords. Without this option, +# the default is Unix crypt. Prior releases used the option "md5". +# +# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in +# login.defs. +# +# See the pam_unix manpage for other options. + +# here are the per-package modules (the "Primary" block) +password [success=2 default=ignore] pam_unix.so obscure sha512 +password [success=1 default=ignore] pam_ldap.so minimum_uid=1000 try_first_pass +# here's the fallback if no module succeeds +password requisite pam_deny.so +# prime the stack with a positive return value if there isn't one already; +# this avoids us returning an error just because nothing sets a success code +# since the modules above will each just jump around +password required pam_permit.so +# and here are more per-package modules (the "Additional" block) +# end of pam-auth-update config diff --git a/meta-openstack/recipes-extended/libpam/files/common-session b/meta-openstack/recipes-extended/libpam/files/common-session new file mode 100644 index 00000000..7f950989 --- /dev/null +++ b/meta-openstack/recipes-extended/libpam/files/common-session @@ -0,0 +1,22 @@ +# +# /etc/pam.d/common-session - session-related modules common to all services +# +# This file is included from other service-specific PAM config files, +# and should contain a list of modules that define tasks to be performed +# at the start and end of sessions of *any* kind (both interactive and +# non-interactive). +# + +# here are the per-package modules (the "Primary" block) +session [default=1] pam_permit.so +# here's the fallback if no module succeeds +session requisite pam_deny.so +# prime the stack with a positive return value if there isn't one already; +# this avoids us returning an error just because nothing sets a success code +# since the modules above will each just jump around +session required pam_permit.so +# and here are more per-package modules (the "Additional" block) +session required pam_unix.so +session [success=ok default=ignore] pam_ldap.so minimum_uid=1000 +session required pam_mkhomedir.so skel=/etc/skel umask=0022 +# end of pam-auth-update config diff --git a/meta-openstack/recipes-extended/libpam/files/common-session-noninteractive b/meta-openstack/recipes-extended/libpam/files/common-session-noninteractive new file mode 100644 index 00000000..f7f83ed3 --- /dev/null +++ b/meta-openstack/recipes-extended/libpam/files/common-session-noninteractive @@ -0,0 +1,21 @@ +# +# /etc/pam.d/common-session-noninteractive - session-related modules +# common to all non-interactive services +# +# This file is included from other service-specific PAM config files, +# and should contain a list of modules that define tasks to be performed +# at the start and end of all non-interactive sessions. +# + +# here are the per-package modules (the "Primary" block) +session [default=1] pam_permit.so +# here's the fallback if no module succeeds +session requisite pam_deny.so +# prime the stack with a positive return value if there isn't one already; +# this avoids us returning an error just because nothing sets a success code +# since the modules above will each just jump around +session required pam_permit.so +# and here are more per-package modules (the "Additional" block) +session required pam_unix.so +session [success=ok default=ignore] pam_ldap.so minimum_uid=1000 +# end of pam-auth-update config diff --git a/meta-openstack/recipes-extended/libpam/libpam_1.1.5.bbappend b/meta-openstack/recipes-extended/libpam/libpam_1.1.5.bbappend new file mode 100644 index 00000000..dc32cc93 --- /dev/null +++ b/meta-openstack/recipes-extended/libpam/libpam_1.1.5.bbappend @@ -0,0 +1,23 @@ +PRINC = "1" + +FILESEXTRAPATHS_prepend := "${THISDIR}/files:" + +SRC_URI += "file://common-account" +SRC_URI += "file://common-auth" +SRC_URI += "file://common-password" +SRC_URI += "file://common-session" +SRC_URI += "file://common-session-noninteractive" + +PACKAGECONFIG ?= "${@base_contains('DISTRO_FEATURES', 'OpenLDAP', 'OpenLDAP', '', d)}" +PACKAGECONFIG[OpenLDAP] = ",,,pam-plugin-mkhomedir nss-pam-ldapd" + +do_install_append() { + if ${@base_contains('DISTRO_FEATURES', 'OpenLDAP', 'true', 'false', d)}; then + install -m 755 -d ${D}/etc/pam.d/ + install -m 644 ${WORKDIR}/common-account ${D}/etc/pam.d/ + install -m 644 ${WORKDIR}/common-auth ${D}/etc/pam.d/ + install -m 644 ${WORKDIR}/common-password ${D}/etc/pam.d/ + install -m 644 ${WORKDIR}/common-session ${D}/etc/pam.d/ + install -m 644 ${WORKDIR}/common-session-noninteractive ${D}/etc/pam.d/ + fi +} |