summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-mxs.c
blob: 7ce616923c52a89897a3ded707ca857e60c23650 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2012 Freescale Semiconductor, Inc.
 */

#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#include <linux/stmp_device.h>

#define SET	0x4
#define CLR	0x8
#define TOG	0xc

#define PWM_CTRL		0x0
#define PWM_ACTIVE0		0x10
#define PWM_PERIOD0		0x20
#define  PERIOD_PERIOD(p)	((p) & 0xffff)
#define  PERIOD_PERIOD_MAX	0x10000
#define  PERIOD_ACTIVE_HIGH	(3 << 16)
#define  PERIOD_ACTIVE_LOW	(2 << 16)
#define  PERIOD_INACTIVE_HIGH	(3 << 18)
#define  PERIOD_INACTIVE_LOW	(2 << 18)
#define  PERIOD_POLARITY_NORMAL	(PERIOD_ACTIVE_HIGH | PERIOD_INACTIVE_LOW)
#define  PERIOD_POLARITY_INVERSE	(PERIOD_ACTIVE_LOW | PERIOD_INACTIVE_HIGH)
#define  PERIOD_CDIV(div)	(((div) & 0x7) << 20)
#define  PERIOD_CDIV_MAX	8

static const u8 cdiv_shift[PERIOD_CDIV_MAX] = {
	0, 1, 2, 3, 4, 6, 8, 10
};

struct mxs_pwm_chip {
	struct pwm_chip chip;
	struct clk *clk;
	void __iomem *base;
};

#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)

static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
			 const struct pwm_state *state)
{
	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
	int ret, div = 0;
	unsigned int period_cycles, duty_cycles;
	unsigned long rate;
	unsigned long long c;
	unsigned int pol_bits;

	/*
	 * If the PWM channel is disabled, make sure to turn on the
	 * clock before calling clk_get_rate() and writing to the
	 * registers. Otherwise, just keep it enabled.
	 */
	if (!pwm_is_enabled(pwm)) {
		ret = clk_prepare_enable(mxs->clk);
		if (ret)
			return ret;
	}

	if (!state->enabled && pwm_is_enabled(pwm))
		writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);

	rate = clk_get_rate(mxs->clk);
	while (1) {
		c = rate >> cdiv_shift[div];
		c = c * state->period;
		do_div(c, 1000000000);
		if (c < PERIOD_PERIOD_MAX)
			break;
		div++;
		if (div >= PERIOD_CDIV_MAX)
			return -EINVAL;
	}

	period_cycles = c;
	c *= state->duty_cycle;
	do_div(c, state->period);
	duty_cycles = c;

	/*
	 * The data sheet the says registers must be written to in
	 * this order (ACTIVEn, then PERIODn). Also, the new settings
	 * only take effect at the beginning of a new period, avoiding
	 * glitches.
	 */

	pol_bits = state->polarity == PWM_POLARITY_NORMAL ?
		PERIOD_POLARITY_NORMAL : PERIOD_POLARITY_INVERSE;
	writel(duty_cycles << 16,
	       mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
	writel(PERIOD_PERIOD(period_cycles) | pol_bits | PERIOD_CDIV(div),
	       mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);

	if (state->enabled) {
		if (!pwm_is_enabled(pwm)) {
			/*
			 * The clock was enabled above. Just enable
			 * the channel in the control register.
			 */
			writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
		}
	} else {
		clk_disable_unprepare(mxs->clk);
	}
	return 0;
}

static const struct pwm_ops mxs_pwm_ops = {
	.apply = mxs_pwm_apply,
	.owner = THIS_MODULE,
};

static int mxs_pwm_probe(struct platform_device *pdev)
{
	struct device_node *np = pdev->dev.of_node;
	struct mxs_pwm_chip *mxs;
	int ret;

	mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
	if (!mxs)
		return -ENOMEM;

	mxs->base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(mxs->base))
		return PTR_ERR(mxs->base);

	mxs->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(mxs->clk))
		return PTR_ERR(mxs->clk);

	mxs->chip.dev = &pdev->dev;
	mxs->chip.ops = &mxs_pwm_ops;
	mxs->chip.of_xlate = of_pwm_xlate_with_flags;
	mxs->chip.of_pwm_n_cells = 3;
	mxs->chip.base = -1;

	ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
	if (ret < 0) {
		dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
		return ret;
	}

	ret = pwmchip_add(&mxs->chip);
	if (ret < 0) {
		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
		return ret;
	}

	platform_set_drvdata(pdev, mxs);

	ret = stmp_reset_block(mxs->base);
	if (ret)
		goto pwm_remove;

	return 0;

pwm_remove:
	pwmchip_remove(&mxs->chip);
	return ret;
}

static int mxs_pwm_remove(struct platform_device *pdev)
{
	struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);

	return pwmchip_remove(&mxs->chip);
}

static const struct of_device_id mxs_pwm_dt_ids[] = {
	{ .compatible = "fsl,imx23-pwm", },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);

static struct platform_driver mxs_pwm_driver = {
	.driver = {
		.name = "mxs-pwm",
		.of_match_table = mxs_pwm_dt_ids,
	},
	.probe = mxs_pwm_probe,
	.remove = mxs_pwm_remove,
};
module_platform_driver(mxs_pwm_driver);

MODULE_ALIAS("platform:mxs-pwm");
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
MODULE_DESCRIPTION("Freescale MXS PWM Driver");
MODULE_LICENSE("GPL v2");