summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/rockchip.c
blob: 95abf7072f3226ecb02897d372b71b2bd8d082e3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
// SPDX-License-Identifier: GPL-2.0+
/**
 * drivers/net/phy/rockchip.c
 *
 * Driver for ROCKCHIP Ethernet PHYs
 *
 * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
 *
 * David Wu <david.wu@rock-chips.com>
 */

#include <linux/ethtool.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/netdevice.h>
#include <linux/phy.h>

#define INTERNAL_EPHY_ID			0x1234d400

#define MII_INTERNAL_CTRL_STATUS		17
#define SMI_ADDR_TSTCNTL			20
#define SMI_ADDR_TSTREAD1			21
#define SMI_ADDR_TSTREAD2			22
#define SMI_ADDR_TSTWRITE			23
#define MII_SPECIAL_CONTROL_STATUS		31

#define MII_AUTO_MDIX_EN			BIT(7)
#define MII_MDIX_EN				BIT(6)

#define MII_SPEED_10				BIT(2)
#define MII_SPEED_100				BIT(3)

#define TSTCNTL_RD				(BIT(15) | BIT(10))
#define TSTCNTL_WR				(BIT(14) | BIT(10))

#define TSTMODE_ENABLE				0x400
#define TSTMODE_DISABLE				0x0

#define WR_ADDR_A7CFG				0x18

static int rockchip_init_tstmode(struct phy_device *phydev)
{
	int ret;

	/* Enable access to Analog and DSP register banks */
	ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
	if (ret)
		return ret;

	ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
	if (ret)
		return ret;

	return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
}

static int rockchip_close_tstmode(struct phy_device *phydev)
{
	/* Back to basic register bank */
	return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
}

static int rockchip_integrated_phy_analog_init(struct phy_device *phydev)
{
	int ret;

	ret = rockchip_init_tstmode(phydev);
	if (ret)
		return ret;

	/*
	 * Adjust tx amplitude to make sginal better,
	 * the default value is 0x8.
	 */
	ret = phy_write(phydev, SMI_ADDR_TSTWRITE, 0xB);
	if (ret)
		return ret;
	ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTCNTL_WR | WR_ADDR_A7CFG);
	if (ret)
		return ret;

	return rockchip_close_tstmode(phydev);
}

static int rockchip_integrated_phy_config_init(struct phy_device *phydev)
{
	int val, ret;

	/*
	 * The auto MIDX has linked problem on some board,
	 * workround to disable auto MDIX.
	 */
	val = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
	if (val < 0)
		return val;
	val &= ~MII_AUTO_MDIX_EN;
	ret = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
	if (ret)
		return ret;

	return rockchip_integrated_phy_analog_init(phydev);
}

static void rockchip_link_change_notify(struct phy_device *phydev)
{
	int speed = SPEED_10;

	if (phydev->autoneg == AUTONEG_ENABLE) {
		int reg = phy_read(phydev, MII_SPECIAL_CONTROL_STATUS);

		if (reg < 0) {
			phydev_err(phydev, "phy_read err: %d.\n", reg);
			return;
		}

		if (reg & MII_SPEED_100)
			speed = SPEED_100;
		else if (reg & MII_SPEED_10)
			speed = SPEED_10;
	} else {
		int bmcr = phy_read(phydev, MII_BMCR);

		if (bmcr < 0) {
			phydev_err(phydev, "phy_read err: %d.\n", bmcr);
			return;
		}

		if (bmcr & BMCR_SPEED100)
			speed = SPEED_100;
		else
			speed = SPEED_10;
	}

	/*
	 * If mode switch happens from 10BT to 100BT, all DSP/AFE
	 * registers are set to default values. So any AFE/DSP
	 * registers have to be re-initialized in this case.
	 */
	if ((phydev->speed == SPEED_10) && (speed == SPEED_100)) {
		int ret = rockchip_integrated_phy_analog_init(phydev);
		if (ret)
			phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n",
				   ret);
	}
}

static int rockchip_set_polarity(struct phy_device *phydev, int polarity)
{
	int reg, err, val;

	/* get the current settings */
	reg = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
	if (reg < 0)
		return reg;

	reg &= ~MII_AUTO_MDIX_EN;
	val = reg;
	switch (polarity) {
	case ETH_TP_MDI:
		val &= ~MII_MDIX_EN;
		break;
	case ETH_TP_MDI_X:
		val |= MII_MDIX_EN;
		break;
	case ETH_TP_MDI_AUTO:
	case ETH_TP_MDI_INVALID:
	default:
		return 0;
	}

	if (val != reg) {
		/* Set the new polarity value in the register */
		err = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
		if (err)
			return err;
	}

	return 0;
}

static int rockchip_config_aneg(struct phy_device *phydev)
{
	int err;

	err = rockchip_set_polarity(phydev, phydev->mdix);
	if (err < 0)
		return err;

	return genphy_config_aneg(phydev);
}

static int rockchip_phy_resume(struct phy_device *phydev)
{
	genphy_resume(phydev);

	return rockchip_integrated_phy_config_init(phydev);
}

static struct phy_driver rockchip_phy_driver[] = {
{
	.phy_id			= INTERNAL_EPHY_ID,
	.phy_id_mask		= 0xfffffff0,
	.name			= "Rockchip integrated EPHY",
	.features		= PHY_BASIC_FEATURES,
	.flags			= 0,
	.link_change_notify	= rockchip_link_change_notify,
	.soft_reset		= genphy_soft_reset,
	.config_init		= rockchip_integrated_phy_config_init,
	.config_aneg		= rockchip_config_aneg,
	.suspend		= genphy_suspend,
	.resume			= rockchip_phy_resume,
},
};

module_phy_driver(rockchip_phy_driver);

static struct mdio_device_id __maybe_unused rockchip_phy_tbl[] = {
	{ INTERNAL_EPHY_ID, 0xfffffff0 },
	{ }
};

MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl);

MODULE_AUTHOR("David Wu <david.wu@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip Ethernet PHY driver");
MODULE_LICENSE("GPL");