Age | Commit message (Collapse) | Author |
|
glibc does not define SYS_futex for 32bit architectures using 64bit
time_t e.g. riscv32, therefore perf fails to compile as it does not find
SYS_futex in C library headers, define it to SYS_futex_time64 when it
exists
Upstream-Status: Pending
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
This is the 5.8.18 stable release
# gpg: Signature made Sun 01 Nov 2020 06:46:02 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.8.17 stable release
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
commit 1aef5b4391f0c75c0a1523706a7b0311846ee12f upstream.
This should be "current" not "skb".
Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/bpf/20200910203314.70018-1-songliubraving@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5da8e4a658109e3b7e1f45ae672b7c06ac3e7158 upstream.
The motivations to go rework memcpy_mcsafe() are that the benefit of
doing slow and careful copies is obviated on newer CPUs, and that the
current opt-in list of CPUs to instrument recovery is broken relative to
those CPUs. There is no need to keep an opt-in list up to date on an
ongoing basis if pmem/dax operations are instrumented for recovery by
default. With recovery enabled by default the old "mcsafe_key" opt-in to
careful copying can be made a "fragile" opt-out. Where the "fragile"
list takes steps to not consume poison across cachelines.
The discussion with Linus made clear that the current "_mcsafe" suffix
was imprecise to a fault. The operations that are needed by pmem/dax are
to copy from a source address that might throw #MC to a destination that
may write-fault, if it is a user page.
So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate
the separate precautions taken on source and destination.
copy_mc_to_kernel() is introduced as a non-SMAP version that does not
expect write-faults on the destination, but is still prepared to abort
with an error code upon taking #MC.
The original copy_mc_fragile() implementation had negative performance
implications since it did not use the fast-string instruction sequence
to perform copies. For this reason copy_mc_to_kernel() fell back to
plain memcpy() to preserve performance on platforms that did not indicate
the capability to recover from machine check exceptions. However, that
capability detection was not architectural and now that some platforms
can recover from fast-string consumption of memory errors the memcpy()
fallback now causes these more capable platforms to fail.
Introduce copy_mc_enhanced_fast_string() as the fast default
implementation of copy_mc_to_kernel() and finalize the transition of
copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'.
With this in place, copy_mc_to_kernel() is fast and recovery-ready by
default regardless of hardware capability.
Thanks to Vivek for identifying that copy_user_generic() is not suitable
as the copy_mc_to_user() backend since the #MC handler explicitly checks
ex_has_fault_handler(). Thanks to the 0day robot for catching a
performance bug in the x86/copy_mc_to_user implementation.
[ bp: Add the "why" for this change from the 0/2th message, massage. ]
Fixes: 92b0729c34ca ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
Reported-by: 0day robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Erwin Tsaur <erwin.tsaur@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec6347bb43395cb92126788a1a5b25302543f815 upstream.
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7fb5eefd76394cfefb380724a87ca40b47d44405 ]
Andrii reported that with latest clang, when building selftests, we have
error likes:
error: progs/test_sysctl_loop1.c:23:16: in function sysctl_tcp_mem i32 (%struct.bpf_sysctl*):
Looks like the BPF stack limit of 512 bytes is exceeded.
Please move large on stack variables into BPF per-cpu array map.
The error is triggered by the following LLVM patch:
https://reviews.llvm.org/D87134
For example, the following code is from test_sysctl_loop1.c:
static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx)
{
volatile char tcp_mem_name[] = "net/ipv4/tcp_mem/very_very_very_very_long_pointless_string";
...
}
Without the above LLVM patch, the compiler did optimization to load the string
(59 bytes long) with 7 64bit loads, 1 8bit load and 1 16bit load,
occupying 64 byte stack size.
With the above LLVM patch, the compiler only uses 8bit loads, but subregister is 32bit.
So stack requirements become 4 * 59 = 236 bytes. Together with other stuff on
the stack, total stack size exceeds 512 bytes, hence compiler complains and quits.
To fix the issue, removing "volatile" key word or changing "volatile" to
"const"/"static const" does not work, the string is put in .rodata.str1.1 section,
which libbpf did not process it and errors out with
libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1
libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name'
in section '.rodata.str1.1'
Defining the string const as global variable can fix the issue as it puts the string constant
in '.rodata' section which is recognized by libbpf. In the future, when libbpf can process
'.rodata.str*.*' properly, the global definition can be changed back to local definition.
Defining tcp_mem_name as a global, however, triggered a verifier failure.
./test_progs -n 7/21
libbpf: load bpf program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
invalid stack off=0 size=1
verification time 6975 usec
stack depth 160+64
processed 889 insns (limit 1000000) max_states_per_insn 4 total_states
14 peak_states 14 mark_read 10
libbpf: -- END LOG --
libbpf: failed to load program 'sysctl_tcp_mem'
libbpf: failed to load object 'test_sysctl_loop2.o'
test_bpf_verif_scale:FAIL:114
#7/21 test_sysctl_loop2.o:FAIL
This actually exposed a bpf program bug. In test_sysctl_loop{1,2}, we have code
like
const char tcp_mem_name[] = "<...long string...>";
...
char name[64];
...
for (i = 0; i < sizeof(tcp_mem_name); ++i)
if (name[i] != tcp_mem_name[i])
return 0;
In the above code, if sizeof(tcp_mem_name) > 64, name[i] access may be
out of bound. The sizeof(tcp_mem_name) is 59 for test_sysctl_loop1.c and
79 for test_sysctl_loop2.c.
Without promotion-to-global change, old compiler generates code where
the overflowed stack access is actually filled with valid value, so hiding
the bpf program bug. With promotion-to-global change, the code is different,
more specifically, the previous loading constants to stack is gone, and
"name" occupies stack[-64:0] and overflow access triggers a verifier error.
To fix the issue, adjust "name" buffer size properly.
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200909171542.3673449-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0f2b7acb4b1d29127ff99c714233b973afd1411 ]
Previously we forgot to close the map fd if bpf_map_update_elem()
failed during map slot init, which will leak map fd.
Let's move map slot initialization to new function init_map_slots() to
simplify the code. And close the map fd if init slot failed.
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201006021345.3817033-2-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 996f9e0f93f16211945c8d5f18f296a88cb32f91 ]
The kselftests test running infrastructure expects tests to finish with an
exit code of 4 if the test decided it should be skipped. Currently
eeh-basic.sh exits with the number of devices that failed to recover, so if
four devices didn't recover we'll report a skip instead of a fail.
Fix this by checking if the return code is non-zero and report success
and failure by returning 0 or 1 respectively. For the cases where should
actually skip return 4.
Fixes: 85d86c8aa52e ("selftests/powerpc: Add basic EEH selftest")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201014024711.1138386-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3013f7ed465479e60c1ab1921a5718fc541cc3b ]
'perf trace ls' started crashing after commit d21cb73a9025 on
!HAVE_SYSCALL_TABLE_SUPPORT configs (armv7l here) like this:
0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:126
1 0xb6800780 in __vfprintf_internal (s=0xbeff9908, s@entry=0xbeff9900, format=0xa27160 "]: %s()", ap=..., mode_flags=<optimized out>) at vfprintf-internal.c:1688
...
5 0x0056ecdc in fprintf (__fmt=0xa27160 "]: %s()", __stream=<optimized out>) at /usr/include/bits/stdio2.h:100
6 trace__sys_exit (trace=trace@entry=0xbeffc710, evsel=evsel@entry=0xd968d0, event=<optimized out>, sample=sample@entry=0xbeffc3e8) at builtin-trace.c:2475
7 0x00566d40 in trace__handle_event (sample=0xbeffc3e8, event=<optimized out>, trace=0xbeffc710) at builtin-trace.c:3122
...
15 main (argc=2, argv=0xbefff6e8) at perf.c:538
It is because memset in trace__read_syscall_info zeroes wrong memory:
1) when initializing for the first time, it does not reset the last id.
2) in other cases, it resets the last id of previous buffer.
ad 1) it causes the crash above as sc->name used in the fprintf above
contains garbage.
ad 2) it sets nonexistent from true back to false for id 11 here. Not
sure, what the consequences are.
So fix it by introducing a special case for the initial initialization
and do the right +1 in both cases.
Fixes: d21cb73a9025 ("perf trace: Grow the syscall table as needed when using libaudit")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201001093419.15761-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bef69bd7cfc363ab94b84ea29102f3e913ed3c6c ]
It was reported that 'perf stat' crashed when using with armv8_pmu (CPU)
events with the task mode. As 'perf stat' uses an empty cpu map for
task mode but armv8_pmu has its own cpu mask, it has confused which map
it should use when accessing file descriptors and this causes segfaults:
(gdb) bt
#0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>,
cpu=<optimized out>) at evsel.c:122
#1 perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156
#2 0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242
#3 0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30,
argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435)
at builtin-stat.c:929
#4 0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90,
argc=1) at builtin-stat.c:947
#5 cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357
#6 0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>,
argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312
#7 0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4,
argv=argv@entry=0xfffffaea2f90) at perf.c:364
#8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>,
argv=<synthetic pointer>) at perf.c:408
#9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538
To fix this, I simply used the given cpu map unless the evsel actually
is not a system-wide event (like uncore events).
Fixes: 7736627b865d ("perf stat: Use affinity for closing file descriptors")
Reported-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201007081311.1831003-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 002a3d690f95804bdef6b70b26154103518e13d9 ]
Some metrics (such as DRAM_BW_Use) consists of uncore events and
duration_time. For uncore events, counter->core.system_wide is true. But
for duration_time, counter->core.system_wide is false so
target.system_wide is set to false.
Then 'enable_on_exec' is set in perf_event_attr of uncore event. Kernel
will return error when trying to open the uncore event.
This patch skips the duration_time in setup_system_wide then
target.system_wide will be set to true for the evlist of uncore events +
duration_time.
Before (tested on skylake desktop):
# perf stat -M DRAM_BW_Use -- sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (arb/event=0x84,umask=0x1/).
/bin/dmesg | grep -i perf may provide additional information.
After:
# perf stat -M DRAM_BW_Use -- sleep 1
Performance counter stats for 'system wide':
169 arb/event=0x84,umask=0x1/ # 0.00 DRAM_BW_Use
40,427 arb/event=0x81,umask=0x1/
1,000,902,197 ns duration_time
1.000902197 seconds time elapsed
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200922015004.30114-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d537a8d2e76bc4fc71e34545ceaa463ac2cd928 ]
A context_switch event can have no tid because pids can be detached from
a task while the task is still running (in do_exit()). Note this won't
happen with per-task contexts because then tracing stops at
perf_event_exit_task()
If a task with no tid gets preempted, or a dying task gets preempted and
its parent releases it, when it subsequently gets switched back in,
Intel PT will not be able to determine what task is running and prints
an error "context_switch event has no tid". However, it is not really an
error because the task is in kernel space and the decoder can continue
to decode successfully. Fix by changing the error to be only a logged
message, and make allowance for tid == -1.
Example:
Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.
$ uname -r
5.9.0-rc4
$ grep PREEMPT .config
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_RCU=y
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DEBUG_PREEMPT=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
Before:
$ cat forkit.c
#include <sys/types.h>
#include <unistd.h>
#include <sys/wait.h>
int main()
{
pid_t child;
int status = 0;
child = fork();
if (child == 0)
return 123;
wait(&status);
return 0;
}
$ gcc -o forkit forkit.c
$ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k &
[1] 11016
$ taskset 2 ./forkit
$ sudo pkill perf
$ [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 17.262 MB perf.data ]
[1]+ Terminated sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k
$ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
context_switch event has no tid
taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020
forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019
forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019
forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020
forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
After:
$ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020
forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019
forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019
forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020
forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: -1/-1
:-1 -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019
:-1 -1 [001] 66663.271707466: 1 instructions:k: ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms])
Fixes: 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lore.kernel.org/lkml/20200909084923.9096-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a219b856a2b993da234108307be772448f22b0ce ]
If a bitmap needs to be allocated, and then by the time the thread
is scheduled to be run again all the indices which would satisfy the
allocation have been allocated then we would leak the allocation. Almost
impossible to hit in practice, but a trivial fix. Found by Coverity.
Fixes: f32f004cddf8 ("ida: Convert to XArray")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c014694b1d2702cdc736d17b60746e7b95ba664 ]
We were failing that due to GTK2+ and then for the ZSTD test, which made
test-all.c, the fast path feature detection file to fail and thus
trigger building all of the feature tests, slowing down the test.
Eventually the ZSTD test would be built and would succeed, since it had
the needed -lzstd, avoiding:
$ cat /tmp/build/perf/feature/test-all.make.output
/usr/bin/ld: /tmp/ccRRJQ4u.o: in function `main_test_libzstd':
/home/acme/git/perf/tools/build/feature/test-libzstd.c:8: undefined reference to `ZSTD_createCStream'
/usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libzstd.c:9: undefined reference to `ZSTD_freeCStream'
collect2: error: ld returned 1 exit status
$
Fix it by adding -lzstd to the test-all target.
Now I need an entry to 'perf test' to make sure that
/tmp/build/perf/feature/test-all.make.output is empty...
Fixes: 3b1c5d9659718263 ("tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines")
Reviewed-by: Alexei Budankov <alexey.budankov@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200904202611.GJ3753976@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4751bddd3f983af2004ec470ca38b42d7a8a53bc ]
This is bitrotting, nobody is stepping up to work on it, and since we
treat warnings as errors, feature detection is failing in its main,
faster test (tools/build/feature/test-all.c) because of the GTK+2
infobar check.
So make this opt-in, at some point ditch this if nobody volunteers to
take care of this.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96378b2088faea68f1fb05ea6b9a566fc569a44c ]
This test uses waking+wakeup_latency as an event name, which doesn't
make sense since it includes an operator. Illegal names are now
detected by the synthetic event command parsing, which causes this
test to fail. Change the name to 'waking_plus_wakeup_latency' to
prevent this.
Link: https://lkml.kernel.org/r/a1ee2f76ff28ef7166fb788ca8be968887808920.1602598160.git.zanussi@kernel.org
Fixes: f06eec4d0f2c (selftests: ftrace: Add inter-event hist triggers testcases)
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b000def2e052fc8ddea31a18019f6ebe044defb3 ]
The test_overhead prog_test included an fmod_ret program that attached to
__set_task_comm() in the kernel. However, this function was never listed as
allowed for return modification, so this only worked because of the
verifier skipping tests when a trampoline already existed for the attach
point. Now that the verifier checks have been fixed, remove fmod_ret from
the test so it works again.
Fixes: 4eaf0b5c5e04 ("selftest/bpf: Fmod_ret prog and implement test_overhead as part of bench")
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fec47bbc10b243690f5d0ee484a0bbdee273e71b ]
getsetsockopt() calls getsockopt() with optlen == 1, but then checks
the resulting int. It is ok on little endian, but not on big endian.
Fix by checking char instead.
Fixes: 8a027dc0d8f5 ("selftests/bpf: add sockopt test that exercises sk helpers")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200915113928.3768496-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b6ed6cf4a3acdeab9aed8e0a524850761ec9b152 ]
server_map's value size is 8, but the test tries to put an int there.
This sort of works on x86 (unless followed by non-0), but hard fails on
s390.
Fix by using __s64 instead of int.
Fixes: 2d7824ffd25c ("selftests: bpf: Add test for sk_assign")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200915113815.3768217-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b974778f998ab1be23eca7436fc13d2d8c6bd59 ]
In case of errors, this message was printed:
(...)
# read: Resource temporarily unavailable
# client exit code 0, server 3
# \nnetns ns1-0-BJlt5D socket stat for 10003:
(...)
Obviously, the idea was to add a new line before the socket stat and not
print "\nnetns".
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d00451c8118f8f7ab8e057bc6ee2f8b7d70b6a1c ]
Instead of full GNU diff (which smaller boot environments may not have),
use "comm" which is more available.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: linux-kselftest@vger.kernel.org
Fixes: f131d9edc29d ("selftests/lkdtm: Don't clear dmesg when running tests")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200909211700.2399399-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cae1d5a2c5a491141faa747e9944ba40ab4ab786 ]
When running gup_benchmark test the following output states that
the config options is missing.
$ sudo ./gup_benchmark
open: No such file or directory
$ sudo strace -e trace=file ./gup_benchmark 2>&1 | tail -3
openat(AT_FDCWD, "/sys/kernel/debug/gup_benchmark", O_RDWR) = -1 ENOENT
(No such file or directory)
open: No such file or directory
+++ exited with 1 +++
Fix it by adding config option fragment.
Fixes: 64c349f4ae78 ("mm: add infrastructure for get_user_pages_fast() benchmarking")
Signed-off-by: Anatoly Pugachev <matorola@gmail.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: Shuah Khan <shuah@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef05afa66c59c2031a3798916ef3ff3778232129 ]
There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.
Fixes: 4f33ddb4e3e2 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <alexgartrell@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826075549.1858580-1-alexgartrell@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02f47faa25db134f6043fb6b12a68b5d4c980bb6 ]
The test is reading UAPI kernel structure from user-space. So it doesn't need
CO-RE relocations and has to use bpf_probe_read_user().
Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-6-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26ebd6fed9bb3aa480c7c0f147ac0e7b11000f65 ]
The kci_test_encap_fou() test from kci_test_encap() in rtnetlink.sh
needs the fou module to work. Otherwise it will fail with:
$ ip netns exec "$testns" ip fou add port 7777 ipproto 47
RTNETLINK answers: No such file or directory
Error talking to the kernel
Add the CONFIG_NET_FOU into the config file as well. Which needs at
least to be set as a loadable module.
Fixes: 6227efc1a20b ("selftests: rtnetlink.sh: add vxlan and fou test cases")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20201019030928.9859-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 71a0e29e99405d89b695882d52eec60844173697 ]
When 'rp_filter' is configured in strict mode (1) the tests fail because
packets received from the macvlan netdevs would not be forwarded through
them on the reverse path.
Fix this by disabling the 'rp_filter', meaning no source validation is
performed.
Fixes: 1538812e0880 ("selftests: forwarding: Add a test for VXLAN asymmetric routing")
Fixes: 438a4f5665b2 ("selftests: forwarding: Add a test for VXLAN symmetric routing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20201015084525.135121-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.8.14 stable release
# gpg: Signature made Wed 07 Oct 2020 02:03:43 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit 72f04da48a9828ba3ae8ac77bea648bda8b7d0ff ]
It would seem none of the kernel continuous integration does this:
$ cd tools/io_uring
$ make
Otherwise it may have noticed:
cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o
io_uring-bench.c
io_uring-bench.c:133:12: error: static declaration of ‘gettid’
follows non-static declaration
133 | static int gettid(void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from io_uring-bench.c:27:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note:
previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
make: *** [<builtin>: io_uring-bench.o] Error 1
The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h
already defines gettid(). So prefix the local definition with
"lk_".
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 21e9ba5373fc2cec608fd68301a1dbfd14df3172 ]
Ubuntu mainline builds for ppc64le are failing with the below error (*):
CALL /home/kernel/COD/linux/scripts/atomic/check-atomics.sh
DESCEND bpf/resolve_btfids
Auto-detecting system features:
... libelf: [ [32mon[m ]
... zlib: [ [32mon[m ]
... bpf: [ [31mOFF[m ]
BPF API too old
make[6]: *** [Makefile:295: bpfdep] Error 1
make[5]: *** [Makefile:54: /home/kernel/COD/linux/debian/build/build-generic/tools/bpf/resolve_btfids//libbpf.a] Error 2
make[4]: *** [Makefile:71: bpf/resolve_btfids] Error 2
make[3]: *** [/home/kernel/COD/linux/Makefile:1890: tools/bpf/resolve_btfids] Error 2
make[2]: *** [/home/kernel/COD/linux/Makefile:335: __build_one_by_one] Error 2
make[2]: Leaving directory '/home/kernel/COD/linux/debian/build/build-generic'
make[1]: *** [Makefile:185: __sub-make] Error 2
make[1]: Leaving directory '/home/kernel/COD/linux'
resolve_btfids needs to be build as a host binary and it needs libbpf.
However, libbpf Makefile hardcodes an include path utilizing $(ARCH).
This results in mixing of cross-architecture headers resulting in a
build failure.
The specific header include path doesn't seem necessary for a libbpf
build. Hence, remove the same.
(*) https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9-rc3/ppc64el/log
Reported-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200902084246.1513055-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.8.13 stable release
# gpg: Signature made Thu 01 Oct 2020 11:39:08 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit 746f534a4809e07f427f7d13d10f3a6a9641e5c3 ]
Encountered the following failure building libbpf from kernel 5.8.5 sources
with GCC 8.4.0 and binutils 2.34: (long paths shortened)
Warning: Num of global symbols in sharedobjs/libbpf-in.o (234) does NOT
match with num of versioned symbols in libbpf.so (236). Please make sure
all LIBBPF_API symbols are versioned in libbpf.map.
# --- libbpf_global_syms.tmp 2020-09-02 07:30:58.920084380 +0000
# +++ libbpf_versioned_syms.tmp 2020-09-02 07:30:58.924084388 +0000
@@ -1,3 +1,5 @@
+_fini
+_init
bpf_btf_get_fd_by_id
bpf_btf_get_next_id
bpf_create_map
make[4]: *** [Makefile:210: check_abi] Error 1
Investigation shows _fini and _init are actually local symbols counted
amongst global ones:
$ readelf --dyn-syms --wide libbpf.so|head -10
Symbol table '.dynsym' contains 343 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00004098 0 SECTION LOCAL DEFAULT 11
2: 00004098 8 FUNC LOCAL DEFAULT 11 _init@@LIBBPF_0.0.1
3: 00023040 8 FUNC LOCAL DEFAULT 14 _fini@@LIBBPF_0.0.1
4: 00000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.0.4
5: 00000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.0.1
6: 0000ffa4 8 FUNC GLOBAL DEFAULT 12 bpf_object__find_map_by_offset@@LIBBPF_0.0.1
A previous commit filtered global symbols in sharedobjs/libbpf-in.o. Do the
same with the libbpf.so DSO for consistent comparison.
Fixes: 306b267cb3c4 ("libbpf: Verify versioned symbols")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200905214831.1565465-1-Tony.Ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3168c158ad3535af1cd7423c9f8cd5ac549f2f9c ]
While compiling libbpf, some GCC versions (at least 8.4.0) have difficulty
determining control flow and a emit warning for potentially uninitialized
usage of 'map', which results in a build error if using "-Werror":
In file included from libbpf.c:56:
libbpf.c: In function '__bpf_object__open':
libbpf_internal.h:59:2: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
^~~~~~~~~~~~
libbpf.c:5032:18: note: 'map' was declared here
struct bpf_map *map, *targ_map;
^~~
The warning/error is false based on code inspection, so silence it with a
NULL initialization.
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Reference: 063e68813391 ("libbpf: Fix false uninitialized variable warning")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200831000304.1696435-1-Tony.Ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db6c6a0df840e3f52c84cc302cc1a08ba11a4416 ]
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da9567959e ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.8.11 stable release
# gpg: Signature made Wed 23 Sep 2020 07:00:26 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.8.10 stable release
# gpg: Signature made Thu 17 Sep 2020 07:56:19 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit 1ec882fc81e3177faf055877310dbdb0c68eb7db upstream.
The displayed size is in bytes while the text says it is in kB.
Shift it by 10 to really display kBytes.
Fixes: fa7b9a805c79 ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e27481224564a93d14106e750de31189deaa8bc8.1598861977.git.christophe.leroy@csgroup.eu
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ]
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f956ec4a1 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b12eea5ad8e77f8a380a141e3db67c07432dde16 ]
The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string. But tool event (duration_time) passes a result of
strdup() caused a leak.
It was found by ASAN during metric test:
Direct leak of 210 byte(s) in 70 object(s) allocated from:
#0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
#2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
#3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: f0fbb114e3025 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfd1b83d75e44a9f65de30accb3dd3b5940bd3ac ]
Asan reported leak of cpu and thread maps as they have one more refcount
than released. I found that after setting evlist maps it should release
it's refcount.
It seems to be broken from the beginning so I chose the original commit
as the culprit. But not sure how it's applied to stable trees since
there are many changes in the code after that.
Fixes: 7e2ed097538c5 ("perf evlist: Store pointer to the cpu and thread maps")
Fixes: 4112eb1899c0e ("perf evlist: Default to syswide target when no thread/cpu maps set")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f57a1ed749a81ec553d89233cab53db9365e193 ]
I found some memory leaks while reading the metric code. Some are real
and others only occur in the error path. When it failed during metric
or event parsing, it should release all resources properly.
Fixes: b18f3e365019d ("perf stat: Support JSON metrics in perf stat")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22fe5a25b5d8c4f8008dc4a8738d6d8a5f5ddbe9 ]
The aliases were never released causing the following leaks:
Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
#0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
#2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
#3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
#4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
#5 0x56332c76a09b in run_test tests/builtin-test.c:410
#6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
#7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
#8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
#9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 956a78356c24c ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b0a18c1aa6cbfa7b0dd513b6be9893ef6e6ac30 ]
If events in a group explicitly set a frequency or period with leader
sampling, don't disable the samples on those events.
Prior to 5.8:
perf record -e '{cycles/period=12345000/,instructions/period=6789000/}:S'
would clear the attributes then apply the config terms. In commit
5f34278867b7 leader sampling configuration was moved to after applying the
config terms, in the example, making the instructions' event have its period
cleared.
This change makes it so that sampling is only disabled if configuration
terms aren't present.
Committer testing:
Before:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.051 MB perf.data (6 samples) ]
#
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
After:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 0.0001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (4 samples) ]
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, { sample_period, sample_freq }: 2, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
Fixes: 5f34278867b7 ("perf evlist: Move leader-sampling configuration")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a39e8c4d9baf65d88f66d49ac684df381e30055 ]
When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf
test signal':
Program received signal SIGSEGV, Segmentation fault.
0x0000000000c68548 in __test_function ()
(gdb) bt
#0 0x0000000000c68548 in __test_function ()
#1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61
#2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ...
#3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ...
#4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ...
#5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ...
...
It's caused by the symbol __test_function being in the ".bss" section:
$ readelf -a ./perf | less
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[28] .bss NOBITS 0000000000c356a0 008346a0
00000000000511f8 0000000000000000 WA 0 0 32
$ nm perf | grep __test_function
0000000000c68548 B __test_function
I guess most of the time we're just lucky the inline asm ended up in the
".text" section, so making it specific explicit with push and pop
section clauses.
$ readelf -a ./perf | less
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[13] .text PROGBITS 0000000000431240 00031240
0000000000306faa 0000000000000000 AX 0 0 16
$ nm perf | grep __test_function
00000000004d62c8 T __test_function
Committer testing:
$ readelf -wi ~/bin/perf | grep producer -m1
<c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all
^^^^^
^^^^^
^^^^^
$
Before:
$ perf test signal
20: Breakpoint overflow signal handler : FAILED!
$
After:
$ perf test signal
20: Breakpoint overflow signal handler : Ok
$
Fixes: 8fd34e1cce18 ("perf test: Improve bp_signal")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c1e4f7e9e49b6925b1fb5c507d2c614f3edb292 ]
The following 4 tests in timers can take longer than the default 45
seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run:
* nsleep-lat - 2m7.350s
* set-timer-lat - 2m0.66s
* inconsistency-check - 1m45.074s
* raw_skew - 2m0.013s
Thus they will be marked as failed with the current 45s setting:
not ok 3 selftests: timers: nsleep-lat # TIMEOUT
not ok 4 selftests: timers: set-timer-lat # TIMEOUT
not ok 6 selftests: timers: inconsistency-check # TIMEOUT
not ok 7 selftests: timers: raw_skew # TIMEOUT
Disable the timeout setting for timers can make these tests finish
properly:
ok 3 selftests: timers: nsleep-lat
ok 4 selftests: timers: set-timer-lat
ok 6 selftests: timers: inconsistency-check
ok 7 selftests: timers: raw_skew
https://bugs.launchpad.net/bugs/1864626
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.8.8 stable release
# gpg: Signature made Wed 09 Sep 2020 01:15:04 PM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.8.7 stable release
# gpg: Signature made Sat 05 Sep 2020 05:28:10 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.8.6 stable release
# gpg: Signature made Thu 03 Sep 2020 05:30:12 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit a060c1f12b525ba828f871eff3127dabf8daa1e6 upstream.
The help info of option "--no-bpf-event" is wrongly described as "record
bpf events", correct it.
Committer testing:
$ perf record -h bpf
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--clang-opt <clang options>
options passed to clang when compiling BPF scriptlets
--clang-path <clang path>
clang binary to use for compiling BPF scriptlets
--no-bpf-event do not record bpf events
$
Fixes: 71184c6ab7e6 ("perf record: Replace option --bpf-event with --no-bpf-event")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IS_ERR(perf_session__new())
[ Upstream commit e4d71f79cf5c10fa8bc6f5d3bebea570c9c438f1 ]
In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()
Committer notes:
This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.
Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|