summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2020-02-19perf stat: Don't report a null stalled cycles per insn metricKim Phillips
commit 80cc7bb6c104d733bff60ddda09f19139c61507c upstream. For data collected on machines with front end stalled cycles supported, such as found on modern AMD CPU families, commit 146540fb545b ("perf stat: Always separate stalled cycles per insn") introduces a new line in CSV output with a leading comma that upsets some automated scripts. Scripts have to use "-e ex_ret_instr" to work around this issue, after upgrading to a version of perf with that commit. We could add "if (have_frontend_stalled && !config->csv_sep)" to the not (total && avg) else clause, to emphasize that CSV users are usually scripts, and are written to do only what is needed, i.e., they wouldn't typically invoke "perf stat" without specifying an explicit event list. But - let alone CSV output - why should users now tolerate a constant 0-reporting extra line in regular terminal output?: BEFORE: $ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1 Performance counter stats for 'system wide': 181,110,981 instructions # 0.58 insn per cycle # 0.00 stalled cycles per insn 309,876,469 cycles 1.002202582 seconds time elapsed The user would not like to see the now permanent: "0.00 stalled cycles per insn" line fixture, as it gives no useful information. So this patch removes the printing of the zeroed stalled cycles line altogether, almost reverting the very original commit fb4605ba47e7 ("perf stat: Check for frontend stalled for metrics"), which seems like it was written to normalize --metric-only column output of common Intel machines at the time: modern Intel machines have ceased to support the genericised frontend stalled metrics AFAICT. AFTER: $ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1 Performance counter stats for 'system wide': 244,071,432 instructions # 0.69 insn per cycle 355,353,490 cycles 1.001862516 seconds time elapsed Output behaviour when stalled cycles is indeed measured is not affected (BEFORE == AFTER): $ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1 Performance counter stats for 'system wide': 247,227,799 instructions # 0.63 insn per cycle # 0.26 stalled cycles per insn 394,745,636 cycles 63,194,485 stalled-cycles-frontend # 16.01% frontend cycles idle 1.002079770 seconds time elapsed Fixes: 146540fb545b ("perf stat: Always separate stalled cycles per insn") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200207230613.26709-1-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14tools/power/acpi: fix compilation errorZhengyuan Liu
commit 1985f8c7f9a42a651a9750d6fcadc74336d182df upstream. If we compile tools/acpi target in the top source directory, we'd get a compilation error showing as bellow: # make tools/acpi DESCEND power/acpi DESCEND tools/acpidbg CC tools/acpidbg/acpidbg.o Assembler messages: Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\ tools/acpidbg/acpidbg.o: No such file or directory ../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\ power/acpi/tools/acpidbg/acpidbg.o' failed make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\ acpidbg.o] Error 1 Makefile:19: recipe for target 'acpidbg' failed make[2]: *** [acpidbg] Error 2 Makefile:54: recipe for target 'acpi' failed make[1]: *** [acpi] Error 2 Makefile:1607: recipe for target 'tools/acpi' failed make: *** [tools/acpi] Error 2 Fixes: d5a4b1a540b8 ("tools/power/acpi: Remove direct kernel source include reference") Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14selftests/bpf: Test freeing sockmap/sockhash with a socket in itJakub Sitnicki
commit 5d3919a953c3c96c02fc7a337f8376cde43ae31f upstream. Commit 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") introduced sleeping issues inside RCU critical sections and while holding a spinlock on sockmap/sockhash tear-down. There has to be at least one socket in the map for the problem to surface. This adds a test that triggers the warnings for broken locking rules. Not a fix per se, but rather tooling to verify the accompanying fixes. Run on a VM with 1 vCPU to reproduce the warnings. Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14bpftool: Don't crash on missing xlated program instructionsToke Høiland-Jørgensen
commit d95f1e8b462c4372ac409886070bb8719d8a4d3a upstream. Turns out the xlated program instructions can also be missing if kptr_restrict sysctl is set. This means that the previous fix to check the jited_prog_insns pointer was insufficient; add another check of the xlated_prog_insns pointer as well. Fixes: 5b79bcdf0362 ("bpftool: Don't crash on missing jited insns or ksyms") Fixes: cae73f233923 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11tools/kvm_stat: Fix kvm_exit filter nameGavin Shan
commit 5fcf3a55a62afb0760ccb6f391d62f20bce4a42f upstream. The filter name is fixed to "exit_reason" for some kvm_exit events, no matter what architect we have. Actually, the filter name ("exit_reason") is only applicable to x86, meaning it's broken on other architects including aarch64. This fixes the issue by providing various kvm_exit filter names, depending on architect we're on. Afterwards, the variable filter name is picked and applied through ioctl(fd, SET_FILTER). Reported-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11selftests: bpf: Ignore FIN packets for reuseport testsLorenz Bauer
commit 8bec4f665e0baecb5f1b683379fc10b3745eb612 upstream. The reuseport tests currently suffer from a race condition: FIN packets count towards DROP_ERR_SKB_DATA, since they don't contain a valid struct cmd. Tests will spuriously fail depending on whether check_results is called before or after the FIN is processed. Exit the BPF program early if FIN is set. Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-3-lmb@cloudflare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11selftests: bpf: Use a temporary file in test_sockmapLorenz Bauer
commit c31dbb1e41d1857b403f9bf58c87f5898519a0bc upstream. Use a proper temporary file for sendpage tests. This means that running the tests doesn't clutter the working directory, and allows running the test on read-only filesystems. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-2-lmb@cloudflare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11selftests/bpf: Skip perf hw events test if the setup disabled itHangbin Liu
commit f1c3656c6d9c147d07d16614455aceb34932bdeb upstream. The same with commit 4e59afbbed96 ("selftests/bpf: skip nmi test when perf hw events are disabled"), it would make more sense to skip the test_stacktrace_build_id_nmi test if the setup (e.g. virtual machines) has disabled hardware perf events. Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117100656.10359-1-liuhangbin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11selftests/bpf: Fix test_attach_probeAlexei Starovoitov
commit 580205dd4fe800b1e95be8b6df9e2991f975a8ad upstream. Fix two issues in test_attach_probe: 1. it was not able to parse /proc/self/maps beyond the first line, since %s means parse string until white space. 2. offset has to be accounted for otherwise uprobed address is incorrect. Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191219020442.1922617-1-ast@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11tc-testing: fix eBPF tests failure on linux fresh clonesDavide Caratti
commit 7145fcfffef1fad4266aaf5ca96727696916edb7 upstream. when the following command is done on a fresh clone of the kernel tree, [root@f31 tc-testing]# ./tdc.py -c bpf test cases that need to build the eBPF sample program fail systematically, because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the 'khdr' target fails). Pass the correct environment to 'make', in place of ENVIR, to allow running these tests. Fixes: 4c2d39bd40c1 ("tc-testing: use a plugin to build eBPF program") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11libbpf: Fix realloc usage in bpf_core_find_candsAndrii Nakryiko
commit 35b9211c0a2427e8f39e534f442f43804fc8d5ca upstream. Fix bug requesting invalid size of reallocated array when constructing CO-RE relocation candidate list. This can cause problems if there are many potential candidates and a very fine-grained memory allocator bucket sizes are used. Fixes: ddc7c3042614 ("libbpf: implement BPF CO-RE offset relocation algorithm") Reported-by: William Smith <williampsmith@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200124201847.212528-1-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11selftests/bpf: Fix perf_buffer test on systems w/ offline CPUsAndrii Nakryiko
commit 91cbdf740a476cf2c744169bf407de2e3ac1f3cf upstream. Fix up perf_buffer.c selftest to take into account offline/missing CPUs. Fixes: ee5cf82ce04a ("selftests/bpf: test perf buffer API") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191212013621.1691858-1-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11cpupower: Revert library ABI changes from commit ae2917093fb60bdc1ed3eThomas Renninger
commit 41ddb7e1f79693d904502ae9bea609837973eff8 upstream. Commit ae2917093fb6 ("tools/power/cpupower: Display boost frequency separately") modified the library function: struct cpufreq_available_frequencies *cpufreq_get_available_frequencies(unsigned int cpu) to struct cpufreq_frequencies *cpufreq_get_frequencies(const char *type, unsigned int cpu) This patch recovers the old API and implements the new functionality in a newly introduce method: struct cpufreq_boost_frequencies *cpufreq_get_available_frequencies(unsigned int cpu) This one should get merged into stable kernels back to 5.0 when the above had been introduced. Fixes: ae2917093fb6 ("tools/power/cpupower: Display boost frequency separately") Cc: stable@vger.kernel.org Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11objtool: Silence build outputOlof Johansson
commit 6ec14aa7a58a1c2fb303692f8cb1ff82d9abd10a upstream. The sync-check.sh script prints out the path due to a "cd -" at the end of the script, even on silent builds. This isn't even needed, since the script is executed in our build instead of sourced (so it won't change the working directory of the surrounding build anyway). Just remove the cd to make the build silent. Fixes: 2ffd84ae973b ("objtool: Update sync-check.sh from perf's check-headers.sh") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/cb002857fafa8186cfb9c3e43fb62e4108a1bab9.1579543924.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05perf report: Fix no libunwind compiled warning break s390 issueJin Yao
[ Upstream commit c3314a74f86dc00827e0945c8e5039fc3aebaa3c ] Commit 800d3f561659 ("perf report: Add warning when libunwind not compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for call chain unwinding and had no support for libunwind. So the warning "Please install libunwind development packages during the perf build." caused the confusion even if the call-graph is displayed correctly. This patch adds checking for HAVE_DWARF_SUPPORT, which is set when libdw-dwarf-unwind is compiled in. Fixes: 800d3f561659 ("perf report: Add warning when libunwind not compiled in") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05tools lib traceevent: Fix memory leakage in filter_eventHewenliang
[ Upstream commit f84ae29a6169318f9c929720c49d96323d2bbab9 ] It is necessary to call free_arg(arg) when add_filter_type() returns NULL in filter_event(). Signed-off-by: Hewenliang <hewenliang4@huawei.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05tools lib: Fix builds when glibc contains strlcpy()Vitaly Chikunov
commit 6c4798d3f08b81c2c52936b10e0fa872590c96ae upstream. Disable a couple of compilation warnings (which are treated as errors) on strlcpy() definition and declaration, allowing users to compile perf and kernel (objtool) when: 1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and perf build fails with this (in gcc): In file included from exec-cmd.c:3: tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls] 20 | extern size_t strlcpy(char *dest, const char *src, size_t size); 2. clang ignores `-Wredundant-decls', but produces another warning when building perf: CC util/string.o ../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] size_t __weak strlcpy(char *dest, const char *src, size_t size) ../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak' # define __weak __attribute__((weak)) /usr/include/bits/string_fortified.h:151:8: note: previous definition is here __NTH (strlcpy (char *__restrict __dest, const char *__restrict __src, Committer notes: The #pragma GCC diagnostic directive was introduced in gcc 4.6, so check for that as well. Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c") Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__") Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481 Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Dmitry Levin <ldv@altlinux.org> Cc: Dmitry Levin <ldv@altlinux.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: kbuild test robot <lkp@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05perf c2c: Fix return type for histogram sorting comparision functionsAndres Freund
commit c1c8013ec34d7163431d18367808ea40b2e305f8 upstream. Commit 722ddfde366f ("perf tools: Fix time sorting") changed - correctly so - hist_entry__sort to return int64. Unfortunately several of the builtin-c2c.c comparison routines only happened to work due the cast caused by the wrong return type. This causes meaningless ordering of both the cacheline list, and the cacheline details page. E.g a simple: perf c2c record -a sleep 3 perf c2c report will result in cacheline table like ================================================= Shared Data Cache Line Table ================================================= # # ------- Cacheline ---------- Total Tot - LLC Load Hitm - - Store Reference - - Load Dram - LLC Total - Core Load Hit - - LLC Load Hit - # Index Address Node PA cnt records Hitm Total Lcl Rmt Total L1Hit L1Miss Lcl Rmt Ld Miss Loads FB L1 L2 Llc Rmt # ..... .............. .... ...... ....... ...... ..... ..... ... .... ..... ...... ...... .... ...... ..... ..... ..... ... .... ....... 0 0x7f0d27ffba00 N/A 0 52 0.12% 13 6 7 12 12 0 0 7 14 40 4 16 0 0 0 1 0x7f0d27ff61c0 N/A 0 6353 14.04% 1475 801 674 779 779 0 0 718 1392 5574 1299 1967 0 115 0 2 0x7f0d26d3ec80 N/A 0 71 0.15% 16 4 12 13 13 0 0 12 24 58 1 20 0 9 0 3 0x7f0d26d3ec00 N/A 0 98 0.22% 23 17 6 19 19 0 0 6 12 79 0 40 0 10 0 i.e. with the list not being ordered by Total Hitm. Fixes: 722ddfde366f ("perf tools: Fix time sorting") Signed-off-by: Andres Freund <andres@anarazel.de> Tested-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org # v3.16+ Link: http://lore.kernel.org/lkml/20200109043030.233746-1-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01libbpf: Fix BTF-defined map's __type macro handling of arraysAndrii Nakryiko
[ Upstream commit a53ba15d81995868651dd28a85d8045aef3d4e20 ] Due to a quirky C syntax of declaring pointers to array or function prototype, existing __type() macro doesn't work with map key/value types that are array or function prototype. One has to create a typedef first and use it to specify key/value type for a BPF map. By using typeof(), pointer to type is now handled uniformly for all kinds of types. Convert one of self-tests as a demonstration. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191004040211.2434033-1-andriin@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26kselftests: cgroup: Avoid the reuse of fd after it is deallocatedHewenliang
[ Upstream commit d671fa6393d6788fc65555d4643b71cb3a361f36 ] It is necessary to set fd to -1 when inotify_add_watch() fails in cg_prepare_for_wait. Otherwise the fd which has been closed in cg_prepare_for_wait may be misused in other functions such as cg_enter_and_wait_for_frozen and cg_freeze_wait. Fixes: 5313bfe425c8 ("selftests: cgroup: add freezer controller self-tests") Signed-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26selftests: gen_kselftest_tar.sh: Do not clobber kselftest/Kees Cook
[ Upstream commit ea1bf0bb18c0bd627d7b551196453ff2fff44225 ] The default installation location for gen_kselftest_tar.sh was still "kselftest/" which collides with the existing directory. Instead, this moves the installation target into "kselftest_install/kselftest/" and adjusts the tar creation accordingly. This also adjusts indentation and logic to be consistent. Fixes: 42d46e57ec97 ("selftests: Extract single-test shell logic from lib.mk") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26libbpf: Don't use kernel-side u32 type in xsk.cAndrii Nakryiko
[ Upstream commit a566e35f1e8b4b3be1e96a804d1cca38b578167c ] u32 is a kernel-side typedef. User-space library is supposed to use __u32. This breaks Github's projection of libbpf. Do u32 -> __u32 fix. Fixes: 94ff9ebb49a5 ("libbpf: Fix compatibility for kernels without need_wakeup") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20191029055953.2461336-1-andriin@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26perf map: No need to adjust the long name of modulesArnaldo Carvalho de Melo
commit f068435d9bb2d825d59e3c101bc579f09315ee01 upstream. At some point in the past we needed to make sure we would get the long name of modules and not just what we get from /proc/modules, but that need, as described in the cset that introduced the adjustment function: Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module") Without using the buildid-cache: # lsmod | grep trusted # insmod trusted.ko # lsmod | grep trusted trusted 24576 0 # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 probe:key_seal (on key_seal in trusted) # perf probe -l probe:key_seal (on key_seal in trusted) # No attempt at opening '[trusted]'. Now using the build-id cache: # rmmod trusted # perf buildid-cache --add ./trusted.ko # insmod trusted.ko # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 # Again, no attempt at reading '[trusted]'. Finally, adding a probe to that function and then using: [root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2 0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) 0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) # This was the only path I could find using the perf tools that reach at this function, then as of november/2019, if we put a probe in the line where the actuall setting of the dso->long_name is done: # perf trace -e probe_perf:* ^C[root@quaco ~] # perf stat -e probe_perf:* -I 2000 2.000404265 0 probe_perf:dso__adjust_kmod_long_name 4.001142200 0 probe_perf:dso__adjust_kmod_long_name 6.001704120 0 probe_perf:dso__adjust_kmod_long_name 8.002398316 0 probe_perf:dso__adjust_kmod_long_name 10.002984010 0 probe_perf:dso__adjust_kmod_long_name 12.003597851 0 probe_perf:dso__adjust_kmod_long_name 14.004113303 0 probe_perf:dso__adjust_kmod_long_name 16.004582773 0 probe_perf:dso__adjust_kmod_long_name 18.005176373 0 probe_perf:dso__adjust_kmod_long_name 20.005801605 0 probe_perf:dso__adjust_kmod_long_name 22.006467540 0 probe_perf:dso__adjust_kmod_long_name ^C 23.683261941 0 probe_perf:dso__adjust_kmod_long_name # Its not being used at all. To further test this I used kvm.ko as the offline module, i.e. removed if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and moved it from the normal kernel distro path, removed the modules, stoped the kvm guest, and then installed it manually, etc. # rmmod kvm-intel # rmmod kvm # lsmod | grep kvm # modprobe kvm-intel modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg) # insmod ./kvm.ko # modprobe kvm-intel modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory # lsmod | grep kvm kvm_intel 299008 0 kvm 765952 1 kvm_intel irqbypass 16384 1 kvm # # perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string' # perf probe -l probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name) # perf record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ] # perf trace -e probe_perf:machine* <SNIP> 6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]") 6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]") <SNIP> The filename doesn't come with the path, no point in trying to set the dso->long_name. [root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm' openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7 openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 [root@quaco ~]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26libbpf: Make btf__resolve_size logic always check size error conditionAndrii Nakryiko
commit 994021a7e08477f7e51285920aac99fc967fae8a upstream. Perform size check always in btf__resolve_size. Makes the logic a bit more robust against corrupted BTF and silences LGTM/Coverity complaining about always true (size < 0) check. Fixes: 69eaab04c675 ("btf: extract BTF type size calculation") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26libbpf: Fix another potential overflow issue in bpf_prog_linfoAndrii Nakryiko
commit dd3ab126379ec040b3edab8559f9c72de6ef9d29 upstream. Fix few issues found by Coverity and LGTM. Fixes: b053b439b72a ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-4-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26libbpf: Fix potential overflow issueAndrii Nakryiko
commit 4ee1135615713387b869dfd099ffdf8656be6784 upstream. Fix a potential overflow issue found by LGTM analysis, based on Github libbpf source code. Fixes: 3d65014146c6 ("bpf: libbpf: Add btf_line_info support to libbpf") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26libbpf: Fix memory leak/double free issueAndrii Nakryiko
commit 3dc5e059821376974177cc801d377e3fcdac6712 upstream. Coverity scan against Github libbpf code found the issue of not freeing memory and leaving already freed memory still referenced from bpf_program. Fix it by re-assigning successfully reallocated memory sooner. Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26libbpf: Fix compatibility for kernels without need_wakeupMagnus Karlsson
commit 94ff9ebb49a546b7f009ed840bafa235c96d4c4b upstream. When the need_wakeup flag was added to AF_XDP, the format of the XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the kernel to take care of compatibility issues arrising from running applications using any of the two formats. However, libbpf was not extended to take care of the case when the application/libbpf uses the new format but the kernel only supports the old format. This patch adds support in libbpf for parsing the old format, before the need_wakeup flag was added, and emulating a set of static need_wakeup flags that will always work for the application. v2 -> v3: * Incorporated code improvements suggested by Jonathan Lemon v1 -> v2: * Rebased to bpf-next * Rewrote the code as the previous version made you blind Fixes: a4500432c2587cb2a ("libbpf: add support for need_wakeup flag in AF_XDP part") Reported-by: Eloy Degen <degeneloy@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23perf script: Fix --reltime with --timeAndi Kleen
[ Upstream commit b3509b6ed7a79ec49f6b64e4f3b780f259a2a468 ] My earlier patch to just enable --reltime with --time was a little too optimistic. The --time parsing would accept absolute time, which is very confusing to the user. Support relative time in --time parsing too. This only works with recent perf record that records the first sample time. Otherwise we error out. Fixes: 3714437d3fcc ("perf script: Allow --time with --reltime") Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191011182140.8353-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23perf script: Allow --time with --reltimeAndi Kleen
commit 3714437d3fcc7956cabcb0077f2a506b61160a56 upstream. The original --reltime patch forbid --time with --reltime. But it turns out --time doesn't really care about --reltime, because the relative time is only used at final output, while the time filtering always works earlier on absolute time. So just remove the check and allow combining the two options. Fixes: 90b10f47c0ee ("perf script: Support relative time") Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23perf probe: Fix wrong address verificationMasami Hiramatsu
commit 07d369857808b7e8e471bbbbb0074a6718f89b31 upstream. Since there are some DIE which has only ranges instead of the combination of entrypc/highpc, address verification must use dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc. Also, the ranges only DIE will have a partial code in different section (e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In that case, we can not use dwarf_entrypc() or die_entrypc(), because the offset from original DIE can be a minus value. Instead, this simply gets the symbol and offset from symtab. Without this patch; # perf probe -D clear_tasks_mm_cpumask:1 Failed to get entry address of clear_tasks_mm_cpumask Error: Failed to add events. And with this patch: # perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0 p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5 p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8 p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16 p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82 Committer testing: I managed to reproduce the above: [root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask _text+919968 p:probe/clear_tasks_mm_cpumask_1 _text+919973 p:probe/clear_tasks_mm_cpumask_2 _text+919976 [root@quaco ~]# But then when trying to actually put the probe in place, it fails if I use :0 as the offset: [root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5 <clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0> 0 void clear_tasks_mm_cpumask(int cpu) 1 { 2 struct task_struct *p; [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. [root@quaco The next patch is needed to fix this case. Fixes: 576b523721b7 ("perf probe: Fix probing symbols with optimization suffix") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23selftests: mlxsw: qos_mc_aware: Fix mausezahn invocationPetr Machata
commit fef6d6704944c7be72fd2b77c021f1aed3d5df0d upstream. Mausezahn does not recognize "own" as a keyword on source IP address. As a result, the MC stream is not running at all, and therefore no UC degradation can be observed even in principle. Fix the invocation, and tighten the test: due to the minimum shaper configured at the MC TCs, we always expect about 20% degradation. Fail the test if it is lower. Fixes: 573363a68f27 ("selftests: mlxsw: Add qos_lib.sh") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23bpftool: Fix printing incorrect pointer in btf_dump_ptrMartin KaFai Lau
commit 555089fdfc37ad65e0ee9b42ca40c238ff546f83 upstream. For plain text output, it incorrectly prints the pointer value "void *data". The "void *data" is actually pointing to memory that contains a bpf-map's value. The intention is to print the content of the bpf-map's value instead of printing the pointer pointing to the bpf-map's value. In this case, a member of the bpf-map's value is a pointer type. Thus, it should print the "*(void **)data". Fixes: 22c349e8db89 ("tools: bpftool: fix format strings and arguments for jsonw_printf()") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23perf report: Fix incorrectly added dimensions as switch perf data fileJin Yao
commit 0feba17bd7ee3b7e03d141f119049dcc23efa94e upstream. We observed an issue that was some extra columns displayed after switching perf data file in browser. The steps to reproduce: 1. perf record -a -e cycles,instructions -- sleep 3 2. perf report --group 3. In browser, we use hotkey 's' to switch to another perf.data 4. Now in browser, the extra columns 'Self' and 'Children' are displayed. The issue is setup_sorting() executed again after repeat path, so dimensions are added again. This patch checks the last key returned from __cmd_report(). If it's K_SWITCH_INPUT_DATA, skips the setup_sorting(). Fixes: ad0de0971b7f ("perf report: Enable the runtime switching of perf data file") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23perf hists: Fix variable name's inconsistency in hists__for_each() macroYuya Fujita
commit 55347ec340af401437680fd0e88df6739a967f9f upstream. Variable names are inconsistent in hists__for_each macro(). Due to this inconsistency, the macro replaces its second argument with "fmt" regardless of its original name. So far it works because only "fmt" is passed to the second argument. However, this behavior is not expected and should be fixed. Fixes: f0786af536bb ("perf hists: Introduce hists__for_each_format macro") Fixes: aa6f50af822a ("perf hists: Introduce hists__for_each_sort_list macro") Signed-off-by: Yuya Fujita <fujita.yuya@fujitsu.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17rseq/selftests: Turn off timeout settingMathieu Desnoyers
[ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ] As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17selftests: firmware: Fix it to do root uid check and skipShuah Khan
[ Upstream commit c65e41538b04e0d64a673828745a00cb68a24371 ] firmware attempts to load test modules that require root access and fail. Fix it to check for root uid and exit with skip code instead. Before this fix: selftests: firmware: fw_run_tests.sh modprobe: ERROR: could not insert 'test_firmware': Operation not permitted You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y CONFIG_FW_LOADER=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y not ok 1 selftests: firmware: fw_run_tests.sh # SKIP With this fix: selftests: firmware: fw_run_tests.sh skip all tests: must be run as root not ok 1 selftests: firmware: fw_run_tests.sh # SKIP Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Reviwed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17tools: PCI: Fix fd leakageHewenliang
commit 3c379a59b4795d7279d38c623e74b9790345a32b upstream. We should close fd before the return of run_test. Fixes: 3f2ed8134834 ("tools: PCI: Add a userspace tool to test PCI endpoint") Signed-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17libbpf: Fix Makefile' libbpf symbol mismatch diagnosticAndrii Nakryiko
commit b568405856906ee4d9ba6284fd36f2928653a623 upstream. Fix Makefile's diagnostic diff output when there is LIBBPF_API-versioned symbols mismatch. Fixes: 1bd63524593b ("libbpf: handle symbol versioning properly for libbpf.a") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20191127200134.1360660-1-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES descriptionEd Maste
commit 58b3bafff8257c6946df5d6aeb215b8ac839ed2a upstream. In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from the description for L1D_RO_EXCL_WRITES, but the extra name remained in the description. Remove it too. Fixes: 7fcfa9a2d9a7 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES") Signed-off-by: Ed Maste <emaste@freebsd.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17selftests: loopback.sh: skip this test if the driver does not supportHangbin Liu
commit cc7e3f63d7299dd1119be39aa187b867d6f8aa17 upstream. The loopback feature is only supported on a few drivers like broadcom, mellanox, etc. The default veth driver has not supported it yet. To avoid returning failed and making the runner feel confused, let's just skip the test on drivers that not support loopback. Fixes: ad11340994d5 ("selftests: Add loopback test") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12selftests: pmtu: fix init mtu value in descriptionHangbin Liu
[ Upstream commit 152044775d0b9a9ed9509caed40efcba2677951d ] There is no a_r3, a_r4 in the testing topology. It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500. Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12kselftest: Support old perl versionsSeongJae Park
[ Upstream commit 4eac734486fd431e0756cc5e929f140911a36a53 ] On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error message: Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10. This commit fixes the error by explicitly specifying the use of the `IO::Handle` package. Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12kselftest/runner: Print new line in print of timeout logSeongJae Park
[ Upstream commit d187801d1a46519d2a322f879f7c8f85c685372e ] If a timeout failure occurs, kselftest kills the test process and prints the timeout log. If the test process has killed while printing a log that ends with new line, the timeout log can be printed in middle of the test process output so that it can be seems like a comment, as below: # test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT This commit avoids such problem by printing one more line before the TIMEOUT failure log. Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12perf header: Fix false warning when there are no duplicate cache entriesMichael Petlan
[ Upstream commit 28707826877f84bce0977845ea529cbdd08e4e8d ] Before this patch, perf expected that there might be NPROC*4 unique cache entries at max, however, it also expected that some of them would be shared and/or of the same size, thus the final number of entries would be reduced to be lower than NPROC*4. In case the number of entries hadn't been reduced (was NPROC*4), the warning was printed. However, some systems might have unusual cache topology, such as the following two-processor KVM guest: cpu level shared_cpu_list size 0 1 0 32K 0 1 0 64K 0 2 0 512K 0 3 0 8192K 1 1 1 32K 1 1 1 64K 1 2 1 512K 1 3 1 8192K This KVM guest has 8 (NPROC*4) unique cache entries, which used to make perf printing the message, although there actually aren't "way too many cpu caches". v2: Removing unused argument. v3: Unifying the way we obtain number of cpus. v4: Removed '& UINT_MAX' construct which is redundant. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12perf metricgroup: Fix printing event names of metric group with multiple eventsKajol Jain
[ Upstream commit eb573e746b9d4f0921dcb2449be3df41dae3caea ] Commit f01642e4912b ("perf metricgroup: Support multiple events for metricgroup") introduced support for multiple events in a metric group. But with the current upstream, metric events names are not printed properly In power9 platform: command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2 1.000208486 2.000368863 2.001400558 Similarly in skylake platform: command:./perf stat --metric-only -M Power -I 1000 1.000579994 2.002189493 With current upstream version, issue is with event name comparison logic in find_evsel_group(). Current logic is to compare events belonging to a metric group to the events in perf_evlist. Since the break statement is missing in the loop used for comparison between metric group and perf_evlist events, the loop continues to execute even after getting a pattern match, and end up in discarding the matches. Incase of single metric event belongs to metric group, its working fine, because in case of single event once it compare all events it reaches to end of perf_evlist. Example for single metric event in power9 platform: command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1 1.000094653 0.2 1.001337059 0.0 This patch fixes the issue by making sure once we found all events belongs to that metric event matched in find_evsel_group(), we successfully break from that loop by adding corresponding condition. With this patch: In power9 platform: command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2 result:# time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent 1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0 2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0 command:# ./perf stat --metric-only -M Power -I 1000 Similarly in skylake platform: result:# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency 1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0 2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0 Committer testing: Before: [root@seventh ~]# perf stat --metric-only -M Power -I 1000 # time 1.000383223 2.001168182 3.001968545 4.002741200 5.003442022 ^C 5.777687244 [root@seventh ~]# After the patch: [root@seventh ~]# perf stat --metric-only -M Power -I 1000 # time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency 1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0 2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0 3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0 4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0 5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0 ^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0 [root@seventh ~]# [root@seventh ~]# dmesg | grep -i skylake [ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [root@seventh ~]# Fixes: f01642e4912b ("perf metricgroup: Support multiple events for metricgroup") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12bpftool: Don't crash on missing jited insns or ksymsToke Høiland-Jørgensen
[ Upstream commit 5b79bcdf03628a3a9ee04d9cd5fabcf61a8e20be ] When the kptr_restrict sysctl is set, the kernel can fail to return jited_ksyms or jited_prog_insns, but still have positive values in nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when trying to dump the program because it only checks the len fields not the actual pointers to the instructions and ksyms. Fix this by adding the missing checks. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12selftests: safesetid: Fix Makefile to set correct test programMasami Hiramatsu
[ Upstream commit 8ef1ec0ca32c6f8a87f5b4c24b1db26da67c5609 ] Fix Makefile to set safesetid-test.sh to TEST_PROGS instead of non existing run_tests.sh. Without this fix, I got following error. ---- TAP version 13 1..1 # selftests: safesetid: run_tests.sh # Warning: file run_tests.sh is missing! not ok 1 selftests: safesetid: run_tests.sh ---- Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12selftests: safesetid: Check the return value of setuid/setgidMasami Hiramatsu
[ Upstream commit 295c4e21cf27ac9af542140e3e797df9e0cf7b5f ] Check the return value of setuid() and setgid(). This fixes the following warnings and improves test result. safesetid-test.c: In function ‘main’: safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(NO_POLICY_USER); ^~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result] setgid(NO_POLICY_USER); ^~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(RESTRICTED_PARENT); ^~~~~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result] setgid(RESTRICTED_PARENT); ^~~~~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c: In function ‘test_setuid’: safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(child_uid); ^~~~~~~~~~~~~~~~~ Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12selftests: safesetid: Move link library to LDLIBSMasami Hiramatsu
[ Upstream commit be12252212fa3dfed6e75112865095c484c0ce87 ] Move -lcap to LDLIBS from CFLAGS because it is a library to be linked. Without this, safesetid failed to build with link error as below. ---- /usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps': safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc' /usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag' /usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc' /usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free' /usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear' collect2: error: ld returned 1 exit status ---- Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-07 02:45:13 +0000