summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2020-06-04objtool: Fix stack offset tracking for indirect CFAsJosh Poimboeuf
commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sourcesArnaldo Carvalho de Melo
commit c75bec79fc080039e4575a0f239ea7b111aabe88 upstream. To get the changes in: 3e3c8ca5a351 ("arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers") Silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h' diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h Which will probably end up enabling the use of "clone3" in 'perf trace -e', haven't checked the build with this change on an arm64 system. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04selftests/ipc: Fix test failure seen after initial test runTyler Hicks
commit b87080eab4c1377706c113fc9c0157f19ea8fed1 upstream. After successfully running the IPC msgque test once, subsequent runs result in a test failure: $ sudo ./run_kselftest.sh TAP version 13 1..1 # selftests: ipc: msgque # Failed to get stats for IPC queue with id 0 # Failed to dump queue: -22 # Bail out! # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 not ok 1 selftests: ipc: msgque # exit=1 The dump_queue() function loops through the possible message queue index values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id represents the index value. The first time the test is ran, the initial index value of 0 is valid and the test is able to complete. The index value of 0 is not valid in subsequent test runs and the loop attempts to try index values of 1, 2, 3, and so on until a valid index value is found that corresponds to the message queue created earlier in the test. The msgctl() syscall returns -1 and sets errno to EINVAL when invalid index values are used. The test failure is caused by incorrectly comparing errno to -EINVAL when cycling through possible index values. Fix invalid test failures on subsequent runs of the msgque test by correctly comparing errno values to a non-negated EINVAL. Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04objtool: Support Clang non-section symbols in ORC dumpJosh Poimboeuf
commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 upstream. Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04objtool: Fix CONFIG_UBSAN_TRAP unreachable warningsJosh Poimboeuf
commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a upstream. CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04libbpf: Initialize *nl_pid so gcc 10 is happyJeremy Cline
commit 4734b0fefbbf98f8c119eb8344efa19dac82cd2c upstream. Builds of Fedora's kernel-tools package started to fail with "may be used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and bpf_get_link_xdp_info() on the s390 architecture. Although libbpf_netlink_open() always returns a negative number when it does not set *nl_pid, the compiler does not determine this and thus believes the variable might be used uninitialized. Assuage gcc's fears by explicitly initializing nl_pid. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781 Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04tools/vm: fix cross-compile buildLucas Stach
commit cf01699ee220c38099eb3e43ce3d10690c8b7060 upstream. Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved the setup of the CC variable to tools/scripts/Makefile.include to make the behavior consistent across all the tools Makefiles. As the vm tools missed the include we end up with the wrong CC in a cross-compiling evironment. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Kelly <martin@martingkelly.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04tracing/selftests: Turn off timeout settingSteven Rostedt (VMware)
commit b43e78f65b1d35fd3e13c7b23f9b64ea83c9ad3a upstream. As the ftrace selftests can run for a long period of time, disable the timeout that the general selftests have. If a selftest hangs, then it probably means the machine will hang too. Link: https://lore.kernel.org/r/alpine.LSU.2.21.1911131604170.18679@pobox.suse.cz Suggested-by: Miroslav Benes <mbenes@suse.cz> Tested-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04selftests: kmod: fix handling test numbers above 9Eric Biggers
commit 6d573a07528308eb77ec072c010819c359bebf6e upstream. get_test_count() and get_test_enabled() were broken for test numbers above 9 due to awk interpreting a field specification like '$0010' as octal rather than decimal. Fix it by stripping the leading zeroes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04tools/test/nvdimm: Fix out of tree buildSantosh Sivaraj
commit 1f776799628139d0da47e710ad86eb58d987ff66 upstream. Out of tree build using make M=tools/test/nvdimm O=/tmp/build -C /tmp/build fails with the following error make: Entering directory '/tmp/build' CC [M] tools/testing/nvdimm/test/nfit.o linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory 19 | #include <nd-core.h> | ^~~~~~~~~~~ compilation terminated. That is because the kbuild file uses $(src) which points to tools/testing/nvdimm, $(srctree) correctly points to root of the linux source tree. Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Santosh Sivaraj <santosh@fossix.org> Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-04tools/testing/nvdimm: Fix compilation failure without CONFIG_DEV_DAX_PMEM_COMPATJan Kara
commit c0e71d602053e4e7637e4bc7d0bc9603ea77a33f upstream. When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the compilation of tools/testing/nvdimm fails with: Building modules, stage 2. MODPOST 11 modules ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined! Fix the problem by calling dax_pmem_compat_test() only if the kernel has the required functionality. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200123154720.12097-1-jack@suse.cz Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"Andy Lutomirski
commit 700d3a5a664df267f01ec8887fd2d8ff98f67e7f upstream. Revert 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") and add a comment to discourage someone else from making the same mistake again. It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below. [ bp: Massage and do the same thing in the respective tools/ header. ] Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") Reported-by: Thorsten Glaser <t.glaser@tarent.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@kernel.org Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294 Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01tools arch x86 uapi: Synch asm/unistd.h with the kernel sourcesArnaldo Carvalho de Melo
commit 761830a03c5c99fc0a7142e16cf0811cb68bd7af upstream. To pick up the change in: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") That doesn't trigger any changes in tooling and silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/unistd.h' differs from latest version at 'arch/x86/include/uapi/asm/unistd.h' diff -u tools/arch/x86/include/uapi/asm/unistd.h arch/x86/include/uapi/asm/unistd.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01bpf, test_verifier: switch bpf_get_stack's 0 s> r8 testDaniel Borkmann
[ no upstream commit ] Switch the comparison, so that is_branch_taken() will recognize that below branch is never taken: [...] 17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] 17: (67) r8 <<= 32 18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...] 18: (c7) r8 s>>= 32 19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] 19: (6d) if r1 s> r8 goto pc+16 [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] [...] Currently we check for is_branch_taken() only if either K is source, or source is a scalar value that is const. For upstream it would be good to extend this properly to check whether dst is const and src not. For the sake of the test_verifier, it is probably not needed here: # ./test_verifier 101 #101/p bpf_get_stack return R0 within range OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED I haven't seen this issue in test_progs* though, they are passing fine: # ./test_progs-no_alu32 -t get_stack Switching to flavor 'no_alu32' subdirectory... #20 get_stack_raw_tp:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t get_stack #20 get_stack_raw_tp:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01bpf: Test_progs, add test to catch retval refine error handlingJohn Fastabend
commit d2db08c7a14e0b5eed6132baf258b80622e041a9 upstream. Before this series the verifier would clamp return bounds of bpf_get_stack() to [0, X] and this led the verifier to believe that a JMP_JSLT 0 would be false and so would prune that path. The result is anything hidden behind that JSLT would be unverified. Add a test to catch this case by hiding an goto pc-1 behind the check which will cause an infinite loop if not rejected. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01bpf: Test_verifier, bpf_get_stack return value add <0John Fastabend
commit 9ac26e9973bac5716a2a542e32f380c84db2b88c upstream. With current ALU32 subreg handling and retval refine fix from last patches we see an expected failure in test_verifier. With verbose verifier state being printed at each step for clarity we have the following relavent lines [I omit register states that are not necessarily useful to see failure cause], #101/p bpf_get_stack return R0 within range FAIL Failed to load prog 'Success'! [..] 14: (85) call bpf_get_stack#67 R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0) R3_w=inv48 15: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) 15: (b7) r1 = 0 16: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 16: (bf) r8 = r0 17: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) 17: (67) r8 <<= 32 18: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smax_value=9223372032559808512, umax_value=18446744069414584320, var_off=(0x0; 0xffffffff00000000), s32_min_value=0, s32_max_value=0, u32_max_value=0, var32_off=(0x0; 0x0)) 18: (c7) r8 s>>= 32 19 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=2147483647, var32_off=(0x0; 0xffffffff)) 19: (cd) if r1 s< r8 goto pc+16 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=0, var32_off=(0x0; 0xffffffff)) 20: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=0, R9=inv48 20: (1f) r9 -= r8 21: (bf) r2 = r7 22: R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0) 22: (0f) r2 += r8 value -2147483648 makes map_value pointer be out of bounds After call bpf_get_stack() on line 14 and some moves we have at line 16 an r8 bound with max_value 48 but an unknown min value. This is to be expected bpf_get_stack call can only return a max of the input size but is free to return any negative error in the 32-bit register space. The C helper is returning an int so will use lower 32-bits. Lines 17 and 18 clear the top 32 bits with a left/right shift but use ARSH so we still have worst case min bound before line 19 of -2147483648. At this point the signed check 'r1 s< r8' meant to protect the addition on line 22 where dst reg is a map_value pointer may very well return true with a large negative number. Then the final line 22 will detect this as an invalid operation and fail the program. What we want to do is proceed only if r8 is positive non-error. So change 'r1 s< r8' to 'r1 s> r8' so that we jump if r8 is negative. Next we will throw an error because we access past the end of the map value. The map value size is 48 and sizeof(struct test_val) is 48 so we walk off the end of the map value on the second call to get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to 24 by using 'sizeof(struct test_val) / 2'. After this everything passes as expected. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf
commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01perf report: Fix no branch type statistics report issueJin Yao
commit c3b10649a80e9da2892c1fd3038c53abd57588f6 upstream. Previously we could get the report of branch type statistics. For example: # perf record -j any,save_type ... # t perf report --stdio # # Branch Statistics: # COND_FWD: 40.6% COND_BWD: 4.1% CROSS_4K: 24.7% CROSS_2M: 12.3% COND: 44.7% UNCOND: 0.0% IND: 6.1% CALL: 24.5% RET: 24.7% But now for the recent perf, it can't report the branch type statistics. It's a regression issue caused by commit 40c39e304641 ("perf report: Fix a no annotate browser displayed issue"), which only counts the branch type statistics for browser mode. This patch moves the branch_type_count() outside of ui__has_annotation() checking, then branch type statistics can work for stdio mode. Fixes: 40c39e304641 ("perf report: Fix a no annotate browser displayed issue") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200313134607.12873-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01perf tools: Support Python 3.8+ in MakefileSam Lunt
commit b9c9ce4e598e012ca7c1813fae2f4d02395807de upstream. Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com> Tested-by: He Zhe <zhe.he@windriver.com> Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: trivial@kernel.org Cc: stable@kernel.org Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01selftests/vm: fix map_hugetlb length used for testing read and writeChristophe Leroy
commit cabc30da10e677c67ab9a136b1478175734715c5 upstream. Commit fa7b9a805c79 ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb") added the possibility to change the size of memory mapped for the test, but left the read and write test using the default value. This is unnoticed when mapping a length greater than the default one, but segfaults otherwise. Fix read_bytes() and write_bytes() by giving them the real length. Also fix the call to munmap(). Fixes: fa7b9a805c79 ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/9a404a13c871c4bd0ba9ede68f69a1225180dd7e.1580978385.git.christophe.leroy@c-s.fr Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01selftests: vm: drop dependencies on page flags from mlock2 testsMichal Hocko
commit eea274d64e6ea8aff2224d33d0851133a84cc7b5 upstream. It was noticed that mlock2 tests are failing after 9c4e6b1a7027f ("mm, mlock, vmscan: no more skipping pagevecs") because the patch has changed the timing on when the page is added to the unevictable LRU list and thus gains the unevictable page flag. The test was just too dependent on the implementation details which were true at the time when it was introduced. Page flags and the timing when they are set is something no userspace should ever depend on. The test should be testing only for the user observable contract of the tested syscalls. Those are defined pretty well for the mlock and there are other means for testing them. In fact this is already done and testing for page flags can be safely dropped to achieve the aimed purpose. Present bits can be checked by /proc/<pid>/smaps RSS field and the locking state by VmFlags although I would argue that Locked: field would be more appropriate. Drop all the page flag machinery and considerably simplify the test. This should be more robust for future kernel changes while checking the promised contract is still valid. Fixes: 9c4e6b1a7027f ("mm, mlock, vmscan: no more skipping pagevecs") Reported-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200324154218.GS19542@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01xarray: Fix early termination of xas_for_each_markedMatthew Wilcox (Oracle)
commit 7e934cf5ace1dceeb804f7493fa28bb697ed3c52 upstream. xas_for_each_marked() is using entry == NULL as a termination condition of the iteration. When xas_for_each_marked() is used protected only by RCU, this can however race with xas_store(xas, NULL) in the following way: TASK1 TASK2 page_cache_delete() find_get_pages_range_tag() xas_for_each_marked() xas_find_marked() off = xas_find_chunk() xas_store(&xas, NULL) xas_init_marks(&xas); ... rcu_assign_pointer(*slot, NULL); entry = xa_entry(off); And thus xas_for_each_marked() terminates prematurely possibly leading to missed entries in the iteration (translating to missing writeback of some pages or a similar problem). If we find a NULL entry that has been marked, skip it (unless we're trying to allocate an entry). Reported-by: Jan Kara <jack@suse.cz> CC: stable@vger.kernel.org Fixes: ef8e5717db01 ("page cache: Convert delete_batch to XArray") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01selftests/x86/ptrace_syscall_32: Fix no-vDSO segfaultAndy Lutomirski
commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 upstream. If AT_SYSINFO is not present, don't try to call a NULL pointer. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01selftests/net: add definition for SOL_DCCP to fix compilation errors for old ↵Alan Maguire
libc commit 83a9b6f639e9f6b632337f9776de17d51d969c77 upstream. Many systems build/test up-to-date kernels with older libcs, and an older glibc (2.17) lacks the definition of SOL_DCCP in /usr/include/bits/socket.h (it was added in the 4.6 timeframe). Adding the definition to the test program avoids a compilation failure that gets in the way of building tools/testing/selftests/net. The test itself will work once the definition is added; either skipping due to DCCP not being configured in the kernel under test or passing, so there are no other more up-to-date glibc dependencies here it seems beyond that missing definition. Fixes: 11fb60d1089f ("selftests: net: reuseport_addr_any: add DCCP") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01tools/accounting/getdelays.c: fix netlink attribute lengthDavid Ahern
commit 4054ab64e29bb05b3dfe758fff3c38a74ba753bb upstream. A recent change to the netlink code: 6e237d099fac ("netlink: Relax attr validation for fixed length types") logs a warning when programs send messages with invalid attributes (e.g., wrong length for a u32). Yafang reported this error message for tools/accounting/getdelays.c. send_cmd() is wrongly adding 1 to the attribute length. As noted in include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload length, so drop the +1. Fixes: 9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix") Reported-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Yafang Shao <laoar.shao@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01tools/power turbostat: Fix 32-bit capabilities warningLen Brown
commit fcaa681c03ea82193e60d7f2cdfd94fbbcd4cae9 upstream. warning: `turbostat' uses 32-bit capabilities (legacy support in use) Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01tools/power turbostat: Fix missing SYS_LPI counter on some ChromebooksLen Brown
commit 1f81c5efc020314b2db30d77efe228b7e117750d upstream. Some Chromebook BIOS' do not export an ACPI LPIT, which is how Linux finds the residency counter for CPU and SYSTEM low power states, that is exports in /sys/devices/system/cpu/cpuidle/*residency_us When these sysfs attributes are missing, check the debugfs attrubte from the pmc_core driver, which accesses the same counter value. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01tools/power turbostat: Fix gcc build warningsLen Brown
commit d8d005ba6afa502ca37ced5782f672c4d2fc1515 upstream. Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size [-Wstringop-truncation] reduce param to strncpy, to guarantee that a null byte is always copied into destination buffer. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01perf map: Fix off by one in strncpy() size argumentdisconnect3d
commit db2c549407d4a76563c579e4768f7d6d32afefba upstream. This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in: strncmp(filename, "/system/lib/", 11) the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious". This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact. Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries") Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Keeping <john@metanate.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Lentine <mlentine@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21tools: Let O= makes handle a relative path with -C optionMasami Hiramatsu
commit be40920fbf1003c38ccdc02b571e01a75d890c82 upstream. When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path: $ make O=BUILD -C tools/perf/ make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf' BUILD: Doing 'make -j8' parallel build ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop. make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf' The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command. To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs. Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21cpupower: avoid multiple definition with gcc -fno-commonMike Gilbert
commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b upstream. Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables. ./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here The -fno-common option will be enabled by default in GCC 10. Bug: https://bugs.gentoo.org/707462 Signed-off-by: Mike Gilbert <floppym@gentoo.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21selftests/rseq: Fix out-of-tree compilationMichael Ellerman
commit ef89d0545132d685f73da6f58b7e7fe002536f91 upstream. Currently if you build with O=... the rseq tests don't build: $ make O=$PWD/output -C tools/testing/selftests/ TARGETS=rseq make: Entering directory '/linux/tools/testing/selftests' ... make[1]: Entering directory '/linux/tools/testing/selftests/rseq' gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /linux/output/rseq/librseq.so gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /linux/output/rseq/basic_test /usr/bin/ld: cannot find -lrseq collect2: error: ld returned 1 exit status This is because the library search path points to the source directory, not the output. We can fix it by changing the library search path to $(OUTPUT). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21perf bench futex-wake: Restore thread count default to online CPU countTommi Rantala
commit f649bd9dd5d5004543bbc3c50b829577b49f5d75 upstream. Since commit 3b2323c2c1c4 ("perf bench futex: Use cpumaps") the default number of threads the benchmark uses got changed from number of online CPUs to zero: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time. [Run 1]: Wokeup 0 of 0 threads in 0.0000 ms [...] [Run 10]: Wokeup 0 of 0 threads in 0.0000 ms Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%) Restore the old behavior by grabbing the number of online CPUs via cpu->nr: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time. [Run 1]: Wokeup 8 of 8 threads in 0.0260 ms [...] [Run 10]: Wokeup 8 of 8 threads in 0.0270 ms Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%) Fixes: 3b2323c2c1c4 ("perf bench futex: Use cpumaps") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200305083714.9381-3-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21ktest: Add timeout for ssh sync testingSteven Rostedt (VMware)
commit 4d00fc477a2ce8b6d2b09fb34ef9fe9918e7d434 upstream. Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21selftests/net/fib_tests: update addr_metric_test for peer route testingHangbin Liu
commit 0d29169a708bf730ede287248e429d579f432d1d upstream. This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21selftests: forwarding: vxlan_bridge_1d: use more proper tos valueHangbin Liu
commit 9b64208f74fbd0e920475ecfe9326f8443fdc3a5 upstream. 0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata <petrm@mellanox.com> Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21selftests: forwarding: vxlan_bridge_1d: fix tos valueHangbin Liu
commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 upstream. After commit 71130f29979c ("vxlan: fix tos value before xmit") we start strict vxlan xmit tos value by RT_TOS(), which limits the tos value less than 0x1E. With current value 0x40 the test will failed with "v1: Expected to capture 10 packets, got 0". So let's choose a smaller tos value for testing. Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testingHangbin Liu
commit e8023b030ce1748930e2dc76353a262fe47d4745 upstream. For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <pmachata@gmail.com> Tested-by: Petr Machata <pmachata@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21selftests: fix too long argumentJiri Benc
commit c363eb48ada5cf732b3f489fab799fc881097842 upstream. With some shells, the command construed for install of bpf selftests becomes too large due to long list of files: make[1]: execvp: /bin/sh: Argument list too long make[1]: *** [../lib.mk:73: install] Error 127 Currently, each of the file lists is replicated three times in the command: in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that by one instance by using make conditionals and separate the echo and rsync into two shell commands. (One would be inclined to just remove the '@' at the beginning of the rsync command and let 'make' echo it by itself; unfortunately, it appears that the '@' in the front of mkdir silences output also for the following commands.) Also, separate handling of each of the lists to its own shell command. The semantics of the makefile is unchanged before and after the patch. The ability of individual test directories to override INSTALL_RULE is retained. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etcArnaldo Carvalho de Melo
commit 3f7774033e6820d25beee5cf7aefa11d4968b951 upstream. We need to set actions->ms.map since 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions"), as in that patch we bail out if map is NULL. Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions") Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15ipv6: Fix route replacement with dev-only routeBenjamin Poirier
commit e404b8c7cfb31654c9024d497cec58a501501692 upstream. After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15selftests: bpf: Reset global state between reuseport test runsLorenz Bauer
commit 51bad0f05616c43d6d34b0a19bcc9bdab8e8fb39 upstream. Currently, there is a lot of false positives if a single reuseport test fails. This is because expected_results and the result map are not cleared. Zero both after individual test runs, which fixes the mentioned false positives. Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15x86/decoder: Add TEST opcode to Group3-2Masami Hiramatsu
commit 8b7e20a7ba54836076ff35a28349dabea4cec48f upstream. Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does. Commit 12a78d43de76 ("x86/decoder: Add new TEST instruction pattern") added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2). Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map. Without this fix, Randy found a warning by insn_decoder_test related to this issue as below. HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c) To fix this error, add the TEST opcode according to AMD64 APM Vol.3. [ bp: Massage commit message. ] Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15usbip: Fix unsafe unaligned pointer usageShuah Khan
commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e upstream. Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool build fails with new gcc -Werror=address-of-packed-member checks. usbip_network.c: In function ‘usbip_net_pack_usb_device’: usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 79 | usbip_net_pack_uint32_t(pack, &udev->busnum); Fix with minor changes to pass by value instead of by address. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15tools lib api fs: Fix gcc9 stringop-truncation compilation errorAndrey Zhizhikin
commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 upstream. GCC9 introduced string hardening mechanisms, which exhibits the error during fs api compilation: error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation] This comes when the length of copy passed to strncpy is is equal to destination size, which could potentially lead to buffer overflow. There is a need to mitigate this potential issue by limiting the size of destination by 1 and explicitly terminate the destination with NULL. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-15kselftest: Minimise dependency of get_size on C library interfacesSiddhesh Poyarekar
commit 6b64a650f0b2ae3940698f401732988699eecf7a upstream. It was observed[1] on arm64 that __builtin_strlen led to an infinite loop in the get_size selftest. This is because __builtin_strlen (and other builtins) may sometimes result in a call to the C library function. The C library implementation of strlen uses an IFUNC resolver to load the most efficient strlen implementation for the underlying machine and hence has a PLT indirection even for static binaries. Because this binary avoids the C library startup routines, the PLT initialization never happens and hence the program gets stuck in an infinite loop. On x86_64 the __builtin_strlen just happens to expand inline and avoid the call but that is not always guaranteed. Further, while testing on x86_64 (Fedora 31), it was observed that the test also failed with a segfault inside write() because the generated code for the write function in glibc seems to access TLS before the syscall (probably due to the cancellation point check) and fails because TLS is not initialised. To mitigate these problems, this patch reduces the interface with the C library to just the syscall function. The syscall function still sets errno on failure, which is undesirable but for now it only affects cases where syscalls fail. [1] https://bugs.linaro.org/show_bug.cgi?id=5479 Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org> Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Tim Bird <tim.bird@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-04selftests: Fix suppress test in fib_tests.shDavid Ahern
commit 2c1dd4c110627c2a4f006643f074119205cfcff4 upstream. fib_tests is spewing errors: ... Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ping: connect: Network is unreachable Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ... Each test entry in fib_tests is supposed to do its own setup and cleanup. Right now the $IP commands in fib_suppress_test are failing because there is no ns1. Add the setup/cleanup and logging expected for each test. Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-04tools/power/acpi: fix compilation errorZhengyuan Liu
commit 1985f8c7f9a42a651a9750d6fcadc74336d182df upstream. If we compile tools/acpi target in the top source directory, we'd get a compilation error showing as bellow: # make tools/acpi DESCEND power/acpi DESCEND tools/acpidbg CC tools/acpidbg/acpidbg.o Assembler messages: Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\ tools/acpidbg/acpidbg.o: No such file or directory ../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\ power/acpi/tools/acpidbg/acpidbg.o' failed make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\ acpidbg.o] Error 1 Makefile:19: recipe for target 'acpidbg' failed make[2]: *** [acpidbg] Error 2 Makefile:54: recipe for target 'acpi' failed make[1]: *** [acpi] Error 2 Makefile:1607: recipe for target 'tools/acpi' failed make: *** [tools/acpi] Error 2 Fixes: d5a4b1a540b8 ("tools/power/acpi: Remove direct kernel source include reference") Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-04tools/kvm_stat: Fix kvm_exit filter nameGavin Shan
commit 5fcf3a55a62afb0760ccb6f391d62f20bce4a42f upstream. The filter name is fixed to "exit_reason" for some kvm_exit events, no matter what architect we have. Actually, the filter name ("exit_reason") is only applicable to x86, meaning it's broken on other architects including aarch64. This fixes the issue by providing various kvm_exit filter names, depending on architect we're on. Afterwards, the variable filter name is picked and applied through ioctl(fd, SET_FILTER). Reported-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-04selftests: bpf: Ignore FIN packets for reuseport testsLorenz Bauer
commit 8bec4f665e0baecb5f1b683379fc10b3745eb612 upstream. The reuseport tests currently suffer from a race condition: FIN packets count towards DROP_ERR_SKB_DATA, since they don't contain a valid struct cmd. Tests will spuriously fail depending on whether check_results is called before or after the FIN is processed. Exit the BPF program early if FIN is set. Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-3-lmb@cloudflare.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-05 05:29:30 +0000