summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2020-04-16selftests/powerpc: Turn off timeout setting for benchmarks, dscr, signal, tmPo-Hsu Lin
commit 850507f30c38dff21ed557cb98ab16db26c32bbc upstream. Some specific tests in powerpc can take longer than the default 45 seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") to run, the following test result was collected across 2 Power8 nodes and 1 Power9 node in our pool: powerpc/benchmarks/futex_bench - 52s powerpc/dscr/dscr_sysfs_test - 116s powerpc/signal/signal_fuzzer - 88s powerpc/tm/tm_unavailable_test - 168s powerpc/tm/tm-poison - 240s Thus they will fail with TIMEOUT error. Disable the timeout setting for these sub-tests to allow them finish properly. https://bugs.launchpad.net/bugs/1864642 Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200318060004.10685-1-po-hsu.lin@canonical.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-16selftests/powerpc: Add tlbie_test in .gitignoreChristophe Leroy
commit 47bf235f324c696395c30541fe4fcf99fcd24188 upstream. The commit identified below added tlbie_test but forgot to add it in .gitignore. Fixes: 93cad5f78995 ("selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/259f9c06ed4563c4fa4fa8ffa652347278d769e7.1582847784.git.christophe.leroy@c-s.fr Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-16tools lib traceevent: Fix memory leakage in filter_eventHewenliang
commit f84ae29a6169318f9c929720c49d96323d2bbab9 upstream. It is necessary to call free_arg(arg) when add_filter_type() returns NULL in filter_event(). Signed-off-by: Hewenliang <hewenliang4@huawei.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12kselftests: cgroup: Avoid the reuse of fd after it is deallocatedHewenliang
commit d671fa6393d6788fc65555d4643b71cb3a361f36 upstream. It is necessary to set fd to -1 when inotify_add_watch() fails in cg_prepare_for_wait. Otherwise the fd which has been closed in cg_prepare_for_wait may be misused in other functions such as cg_enter_and_wait_for_frozen and cg_freeze_wait. Fixes: 5313bfe425c8 ("selftests: cgroup: add freezer controller self-tests") Signed-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12selftests: gen_kselftest_tar.sh: Do not clobber kselftest/Kees Cook
commit ea1bf0bb18c0bd627d7b551196453ff2fff44225 upstream. The default installation location for gen_kselftest_tar.sh was still "kselftest/" which collides with the existing directory. Instead, this moves the installation target into "kselftest_install/kselftest/" and adjusts the tar creation accordingly. This also adjusts indentation and logic to be consistent. Fixes: 42d46e57ec97 ("selftests: Extract single-test shell logic from lib.mk") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf map: No need to adjust the long name of modulesArnaldo Carvalho de Melo
commit f068435d9bb2d825d59e3c101bc579f09315ee01 upstream. At some point in the past we needed to make sure we would get the long name of modules and not just what we get from /proc/modules, but that need, as described in the cset that introduced the adjustment function: Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module") Without using the buildid-cache: # lsmod | grep trusted # insmod trusted.ko # lsmod | grep trusted trusted 24576 0 # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 probe:key_seal (on key_seal in trusted) # perf probe -l probe:key_seal (on key_seal in trusted) # No attempt at opening '[trusted]'. Now using the build-id cache: # rmmod trusted # perf buildid-cache --add ./trusted.ko # insmod trusted.ko # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 # Again, no attempt at reading '[trusted]'. Finally, adding a probe to that function and then using: [root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2 0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) 0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) # This was the only path I could find using the perf tools that reach at this function, then as of november/2019, if we put a probe in the line where the actuall setting of the dso->long_name is done: # perf trace -e probe_perf:* ^C[root@quaco ~] # perf stat -e probe_perf:* -I 2000 2.000404265 0 probe_perf:dso__adjust_kmod_long_name 4.001142200 0 probe_perf:dso__adjust_kmod_long_name 6.001704120 0 probe_perf:dso__adjust_kmod_long_name 8.002398316 0 probe_perf:dso__adjust_kmod_long_name 10.002984010 0 probe_perf:dso__adjust_kmod_long_name 12.003597851 0 probe_perf:dso__adjust_kmod_long_name 14.004113303 0 probe_perf:dso__adjust_kmod_long_name 16.004582773 0 probe_perf:dso__adjust_kmod_long_name 18.005176373 0 probe_perf:dso__adjust_kmod_long_name 20.005801605 0 probe_perf:dso__adjust_kmod_long_name 22.006467540 0 probe_perf:dso__adjust_kmod_long_name ^C 23.683261941 0 probe_perf:dso__adjust_kmod_long_name # Its not being used at all. To further test this I used kvm.ko as the offline module, i.e. removed if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and moved it from the normal kernel distro path, removed the modules, stoped the kvm guest, and then installed it manually, etc. # rmmod kvm-intel # rmmod kvm # lsmod | grep kvm # modprobe kvm-intel modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg) # insmod ./kvm.ko # modprobe kvm-intel modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory # lsmod | grep kvm kvm_intel 299008 0 kvm 765952 1 kvm_intel irqbypass 16384 1 kvm # # perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string' # perf probe -l probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name) # perf record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ] # perf trace -e probe_perf:machine* <SNIP> 6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]") 6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]") <SNIP> The filename doesn't come with the path, no point in trying to set the dso->long_name. [root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm' openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7 openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 [root@quaco ~]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12libbpf: Make btf__resolve_size logic always check size error conditionAndrii Nakryiko
commit 994021a7e08477f7e51285920aac99fc967fae8a upstream. Perform size check always in btf__resolve_size. Makes the logic a bit more robust against corrupted BTF and silences LGTM/Coverity complaining about always true (size < 0) check. Fixes: 69eaab04c675 ("btf: extract BTF type size calculation") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12libbpf: Fix another potential overflow issue in bpf_prog_linfoAndrii Nakryiko
commit dd3ab126379ec040b3edab8559f9c72de6ef9d29 upstream. Fix few issues found by Coverity and LGTM. Fixes: b053b439b72a ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-4-andriin@fb.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12libbpf: Fix potential overflow issueAndrii Nakryiko
commit 4ee1135615713387b869dfd099ffdf8656be6784 upstream. Fix a potential overflow issue found by LGTM analysis, based on Github libbpf source code. Fixes: 3d65014146c6 ("bpf: libbpf: Add btf_line_info support to libbpf") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12libbpf: Fix memory leak/double free issueAndrii Nakryiko
commit 3dc5e059821376974177cc801d377e3fcdac6712 upstream. Coverity scan against Github libbpf code found the issue of not freeing memory and leaving already freed memory still referenced from bpf_program. Fix it by re-assigning successfully reallocated memory sooner. Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf script: Fix --reltime with --timeAndi Kleen
commit b3509b6ed7a79ec49f6b64e4f3b780f259a2a468 upstream. My earlier patch to just enable --reltime with --time was a little too optimistic. The --time parsing would accept absolute time, which is very confusing to the user. Support relative time in --time parsing too. This only works with recent perf record that records the first sample time. Otherwise we error out. Fixes: 3714437d3fcc ("perf script: Allow --time with --reltime") Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191011182140.8353-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf script: Allow --time with --reltimeAndi Kleen
commit 3714437d3fcc7956cabcb0077f2a506b61160a56 upstream. The original --reltime patch forbid --time with --reltime. But it turns out --time doesn't really care about --reltime, because the relative time is only used at final output, while the time filtering always works earlier on absolute time. So just remove the check and allow combining the two options. Fixes: 90b10f47c0ee ("perf script: Support relative time") Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf time-utils: Make perf_time__parse_for_ranges() more logicalAdrian Hunter
commit 929afa0092d0ea6be2fbd0ac087319092595eba6 upstream. Explicit time ranges never contain a percent sign whereas percentage ranges always do, so it is possible to call the correct parser. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20190604130017.31207-18-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf probe: Do not depend on dwfl_module_addrsym()Masami Hiramatsu
commit 1efde2754275dbd9d11c6e0132a4f09facf297ab upstream. Do not depend on dwfl_module_addrsym() because it can fail on user-space shared libraries. Actually, same bug was fixed by commit 664fee3dc379 ("perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit 07d369857808 ("perf probe: Fix wrong address verification) reverted to get actual symbol address from symtab. This fixes it again by getting symbol address from DIE, and only if the DIE has only address range, it uses dwfl_module_addrsym(). Fixes: 07d369857808 ("perf probe: Fix wrong address verification) Reported-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf probe: Fix wrong address verificationMasami Hiramatsu
commit 07d369857808b7e8e471bbbbb0074a6718f89b31 upstream. Since there are some DIE which has only ranges instead of the combination of entrypc/highpc, address verification must use dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc. Also, the ranges only DIE will have a partial code in different section (e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In that case, we can not use dwarf_entrypc() or die_entrypc(), because the offset from original DIE can be a minus value. Instead, this simply gets the symbol and offset from symtab. Without this patch; # perf probe -D clear_tasks_mm_cpumask:1 Failed to get entry address of clear_tasks_mm_cpumask Error: Failed to add events. And with this patch: # perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0 p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5 p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8 p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16 p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82 Committer testing: I managed to reproduce the above: [root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask _text+919968 p:probe/clear_tasks_mm_cpumask_1 _text+919973 p:probe/clear_tasks_mm_cpumask_2 _text+919976 [root@quaco ~]# But then when trying to actually put the probe in place, it fails if I use :0 as the offset: [root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5 <clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0> 0 void clear_tasks_mm_cpumask(int cpu) 1 { 2 struct task_struct *p; [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. [root@quaco The next patch is needed to fix this case. Fixes: 576b523721b7 ("perf probe: Fix probing symbols with optimization suffix") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12selftests: mlxsw: qos_mc_aware: Fix mausezahn invocationPetr Machata
commit fef6d6704944c7be72fd2b77c021f1aed3d5df0d upstream. Mausezahn does not recognize "own" as a keyword on source IP address. As a result, the MC stream is not running at all, and therefore no UC degradation can be observed even in principle. Fix the invocation, and tighten the test: due to the minimum shaper configured at the MC TCs, we always expect about 20% degradation. Fail the test if it is lower. Fixes: 573363a68f27 ("selftests: mlxsw: Add qos_lib.sh") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12bpf: Selftests build error in sockmap_basic.cJohn Fastabend
commit f2e97dc126b712c0d21219ed0c42710006c1cf52 upstream. Fix following build error. We could push a tcp.h header into one of the include paths, but I think its easy enough to simply pull in the three defines we need here. If we end up using more of tcp.h at some point we can pull it in later. /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’: /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function) repair = TCP_REPAIR_ON; ^ /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function) repair = TCP_REPAIR_OFF_NO_WP; Then with fix, $ ./test_progs -n 44 #44/1 sockmap create_update_free:OK #44/2 sockhash create_update_free:OK #44 sockmap_basic:OK Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12selftests/bpf: Test freeing sockmap/sockhash with a socket in itJakub Sitnicki
commit 5d3919a953c3c96c02fc7a337f8376cde43ae31f upstream. Commit 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") introduced sleeping issues inside RCU critical sections and while holding a spinlock on sockmap/sockhash tear-down. There has to be at least one socket in the map for the problem to surface. This adds a test that triggers the warnings for broken locking rules. Not a fix per se, but rather tooling to verify the accompanying fixes. Run on a VM with 1 vCPU to reproduce the warnings. Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf report: Fix incorrectly added dimensions as switch perf data fileJin Yao
commit 0feba17bd7ee3b7e03d141f119049dcc23efa94e upstream. We observed an issue that was some extra columns displayed after switching perf data file in browser. The steps to reproduce: 1. perf record -a -e cycles,instructions -- sleep 3 2. perf report --group 3. In browser, we use hotkey 's' to switch to another perf.data 4. Now in browser, the extra columns 'Self' and 'Children' are displayed. The issue is setup_sorting() executed again after repeat path, so dimensions are added again. This patch checks the last key returned from __cmd_report(). If it's K_SWITCH_INPUT_DATA, skips the setup_sorting(). Fixes: ad0de0971b7f ("perf report: Enable the runtime switching of perf data file") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf hists: Fix variable name's inconsistency in hists__for_each() macroYuya Fujita
commit 55347ec340af401437680fd0e88df6739a967f9f upstream. Variable names are inconsistent in hists__for_each macro(). Due to this inconsistency, the macro replaces its second argument with "fmt" regardless of its original name. So far it works because only "fmt" is passed to the second argument. However, this behavior is not expected and should be fixed. Fixes: f0786af536bb ("perf hists: Introduce hists__for_each_format macro") Fixes: aa6f50af822a ("perf hists: Introduce hists__for_each_sort_list macro") Signed-off-by: Yuya Fujita <fujita.yuya@fujitsu.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12tools: gpio: Fix out-of-tree build regressionAnssi Hannula
commit 82f04bfe2aff428b063eefd234679b2d693228ed upstream. Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12perf c2c: Fix return type for histogram sorting comparision functionsAndres Freund
commit c1c8013ec34d7163431d18367808ea40b2e305f8 upstream. Commit 722ddfde366f ("perf tools: Fix time sorting") changed - correctly so - hist_entry__sort to return int64. Unfortunately several of the builtin-c2c.c comparison routines only happened to work due the cast caused by the wrong return type. This causes meaningless ordering of both the cacheline list, and the cacheline details page. E.g a simple: perf c2c record -a sleep 3 perf c2c report will result in cacheline table like ================================================= Shared Data Cache Line Table ================================================= # # ------- Cacheline ---------- Total Tot - LLC Load Hitm - - Store Reference - - Load Dram - LLC Total - Core Load Hit - - LLC Load Hit - # Index Address Node PA cnt records Hitm Total Lcl Rmt Total L1Hit L1Miss Lcl Rmt Ld Miss Loads FB L1 L2 Llc Rmt # ..... .............. .... ...... ....... ...... ..... ..... ... .... ..... ...... ...... .... ...... ..... ..... ..... ... .... ....... 0 0x7f0d27ffba00 N/A 0 52 0.12% 13 6 7 12 12 0 0 7 14 40 4 16 0 0 0 1 0x7f0d27ff61c0 N/A 0 6353 14.04% 1475 801 674 779 779 0 0 718 1392 5574 1299 1967 0 115 0 2 0x7f0d26d3ec80 N/A 0 71 0.15% 16 4 12 13 13 0 0 12 24 58 1 20 0 9 0 3 0x7f0d26d3ec00 N/A 0 98 0.22% 23 17 6 19 19 0 0 6 12 79 0 40 0 10 0 i.e. with the list not being ordered by Total Hitm. Fixes: 722ddfde366f ("perf tools: Fix time sorting") Signed-off-by: Andres Freund <andres@anarazel.de> Tested-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org # v3.16+ Link: http://lore.kernel.org/lkml/20200109043030.233746-1-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12selftests: Install settings files to fix TIMEOUT failuresMichael Ellerman
commit b9167c8078c3527de6da241c8a1a75a9224ed90a upstream. Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") added a 45 second timeout for tests, and also added a way for tests to customise the timeout via a settings file. For example the ftrace tests take multiple minutes to run, so they were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off timeout setting"). This works when the tests are run from the source tree. However if the tests are installed with "make -C tools/testing/selftests install", the settings files are not copied into the install directory. When the tests are then run from the install directory the longer timeouts are not applied and the tests timeout incorrectly. So add the settings files to TEST_FILES of the appropriate Makefiles to cause the settings files to be installed using the existing install logic. Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> [PG: drop mptcp chunk - not present in v5.2 codebase.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-12selftests: settings: tests can be in subsubdirsMatthieu Baerts
commit ac87813d4372f4c005264acbe3b7f00c1dee37c4 upstream. Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") adds support for a new per-test-directory "settings" file. But this only works for tests not in a sub-subdirectories, e.g. - tools/testing/selftests/rtc (rtc) is OK, - tools/testing/selftests/net/mptcp (net/mptcp) is not. We have to increase the timeout for net/mptcp tests which are not upstreamed yet but this fix is valid for other tests if they need to add a "settings" file, see the full list with: tools/testing/selftests/*/*/**/Makefile Note that this patch changes the text header message printed at the end of the execution but this text is modified only for the tests that are in sub-subdirectories, e.g. ok 1 selftests: net/mptcp: mptcp_connect.sh Before we had: ok 1 selftests: mptcp: mptcp_connect.sh But showing the full target name is probably better, just in case a subsubdir has the same name as another one in another subdirectory. Fixes: 852c8cbf34d3 (selftests/kselftest/runner.sh: Add 45 second timeout per test) Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-30rseq/selftests: Turn off timeout settingMathieu Desnoyers
commit af9cb29c5488381083b0b5ccdfb3cd931063384a upstream. As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-30selftests: firmware: Fix it to do root uid check and skipShuah Khan
commit c65e41538b04e0d64a673828745a00cb68a24371 upstream. firmware attempts to load test modules that require root access and fail. Fix it to check for root uid and exit with skip code instead. Before this fix: selftests: firmware: fw_run_tests.sh modprobe: ERROR: could not insert 'test_firmware': Operation not permitted You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y CONFIG_FW_LOADER=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y not ok 1 selftests: firmware: fw_run_tests.sh # SKIP With this fix: selftests: firmware: fw_run_tests.sh skip all tests: must be run as root not ok 1 selftests: firmware: fw_run_tests.sh # SKIP Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Reviwed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-30tools: PCI: Fix fd leakageHewenliang
commit 3c379a59b4795d7279d38c623e74b9790345a32b upstream. We should close fd before the return of run_test. Fixes: 3f2ed8134834 ("tools: PCI: Add a userspace tool to test PCI endpoint") Signed-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-30x86/syscalls: Split the x32 syscalls into their own tableAndy Lutomirski
commit 6365b842aae4490ebfafadfc6bb27a6d3cc54757 upstream. For unfortunate historical reasons, the x32 syscalls and the x86_64 syscalls are not all numbered the same. As an example, ioctl() is nr 16 on x86_64 but 514 on x32. This has potentially nasty consequences, since it means that there are two valid RAX values to do ioctl(2) and two invalid RAX values. The valid values are 16 (i.e. ioctl(2) using the x86_64 ABI) and (514 | 0x40000000) (i.e. ioctl(2) using the x32 ABI). The invalid values are 514 and (16 | 0x40000000). 514 will enter the "COMPAT_SYSCALL_DEFINE3(ioctl, ...)" entry point with in_compat_syscall() and in_x32_syscall() returning false, whereas (16 | 0x40000000) will enter the native entry point with in_compat_syscall() and in_x32_syscall() returning true. Both are bogus, and both will exercise code paths in the kernel and in any running seccomp filters that really ought to be unreachable. Splitting out the x32 syscalls into their own tables, allows both bogus invocations to return -ENOSYS. I've checked glibc, musl, and Bionic, and all of them appear to call syscalls with their correct numbers, so this change should have no effect on them. There is an added benefit going forward: new syscalls that need special handling on x32 can share the same number on x32 and x86_64. This means that the special syscall range 512-547 can be treated as a legacy wart instead of something that may need to be extended in the future. Also add a selftest to verify the new behavior. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/208024256b764312598f014ebfb0a42472c19354.1562185330.git.luto@kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-30perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES descriptionEd Maste
commit 58b3bafff8257c6946df5d6aeb215b8ac839ed2a upstream. In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from the description for L1D_RO_EXCL_WRITES, but the extra name remained in the description. Remove it too. Fixes: 7fcfa9a2d9a7 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES") Signed-off-by: Ed Maste <emaste@freebsd.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-30selftests: loopback.sh: skip this test if the driver does not supportHangbin Liu
commit cc7e3f63d7299dd1119be39aa187b867d6f8aa17 upstream. The loopback feature is only supported on a few drivers like broadcom, mellanox, etc. The default veth driver has not supported it yet. To avoid returning failed and making the runner feel confused, let's just skip the test on drivers that not support loopback. Fixes: ad11340994d5 ("selftests: Add loopback test") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20bpftool: Don't crash on missing xlated program instructionsToke Høiland-Jørgensen
commit d95f1e8b462c4372ac409886070bb8719d8a4d3a upstream. Turns out the xlated program instructions can also be missing if kptr_restrict sysctl is set. This means that the previous fix to check the jited_prog_insns pointer was insufficient; add another check of the xlated_prog_insns pointer as well. Fixes: 5b79bcdf0362 ("bpftool: Don't crash on missing jited insns or ksyms") Fixes: cae73f233923 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests: pmtu: fix init mtu value in descriptionHangbin Liu
commit 152044775d0b9a9ed9509caed40efcba2677951d upstream. There is no a_r3, a_r4 in the testing topology. It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500. Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20kselftest: Support old perl versionsSeongJae Park
commit 4eac734486fd431e0756cc5e929f140911a36a53 upstream. On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error message: Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10. This commit fixes the error by explicitly specifying the use of the `IO::Handle` package. Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20kselftest/runner: Print new line in print of timeout logSeongJae Park
commit d187801d1a46519d2a322f879f7c8f85c685372e upstream. If a timeout failure occurs, kselftest kills the test process and prints the timeout log. If the test process has killed while printing a log that ends with new line, the timeout log can be printed in middle of the test process output so that it can be seems like a comment, as below: # test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT This commit avoids such problem by printing one more line before the TIMEOUT failure log. Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20bpftool: Don't crash on missing jited insns or ksymsToke Høiland-Jørgensen
commit 5b79bcdf03628a3a9ee04d9cd5fabcf61a8e20be upstream. When the kptr_restrict sysctl is set, the kernel can fail to return jited_ksyms or jited_prog_insns, but still have positive values in nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when trying to dump the program because it only checks the len fields not the actual pointers to the instructions and ksyms. Fix this by adding the missing checks. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests: safesetid: Fix Makefile to set correct test programMasami Hiramatsu
commit 8ef1ec0ca32c6f8a87f5b4c24b1db26da67c5609 upstream. Fix Makefile to set safesetid-test.sh to TEST_PROGS instead of non existing run_tests.sh. Without this fix, I got following error. ---- TAP version 13 1..1 # selftests: safesetid: run_tests.sh # Warning: file run_tests.sh is missing! not ok 1 selftests: safesetid: run_tests.sh ---- Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests: safesetid: Check the return value of setuid/setgidMasami Hiramatsu
commit 295c4e21cf27ac9af542140e3e797df9e0cf7b5f upstream. Check the return value of setuid() and setgid(). This fixes the following warnings and improves test result. safesetid-test.c: In function ‘main’: safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(NO_POLICY_USER); ^~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result] setgid(NO_POLICY_USER); ^~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(RESTRICTED_PARENT); ^~~~~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result] setgid(RESTRICTED_PARENT); ^~~~~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c: In function ‘test_setuid’: safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(child_uid); ^~~~~~~~~~~~~~~~~ Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests: safesetid: Move link library to LDLIBSMasami Hiramatsu
commit be12252212fa3dfed6e75112865095c484c0ce87 upstream. Move -lcap to LDLIBS from CFLAGS because it is a library to be linked. Without this, safesetid failed to build with link error as below. ---- /usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps': safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc' /usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag' /usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc' /usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free' /usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear' collect2: error: ld returned 1 exit status ---- Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests/ftrace: Fix multiple kprobe testcaseMasami Hiramatsu
commit 5cc6c8d4a99d0ee4d5466498e258e593df1d3eb6 upstream. Fix multiple kprobe event testcase to work it correctly. There are 2 bugfixes. - Since `wc -l FILE` returns not only line number but also FILE filename, following "if" statement always failed. Fix this bug by replacing it with 'cat FILE | wc -l' - Since "while do-done loop" block with pipeline becomes a subshell, $N local variable is not update outside of the loop. Fix this bug by using actual target number (256) instead of $N. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests/ftrace: Do not to use absolute debugfs pathMasami Hiramatsu
commit ba1b9c5048e43716921abe3a1db19cebebf4a5f5 upstream. Use relative path to trigger file instead of absolute debugfs path, because if the user uses tracefs instead of debugfs, it can be mounted at /sys/kernel/tracing. Anyway, since the ftracetest is designed to be run at the tracing directory, user doesn't need to use absolute path. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests/ftrace: Fix ftrace test cases to check unsupportedMasami Hiramatsu
commit 25deae098e748d8d36bc35129a66734b8f6925c9 upstream. Since dynamic function tracer can be disabled, set_ftrace_filter can be disappeared. Test cases which depends on it, must check whether the set_ftrace_filter exists or not before testing and if not, return as unsupported. Also, if the function tracer itself is disabled, we can not set "function" to current_tracer. Test cases must check it before testing, and return as unsupported. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests/ftrace: Fix to check the existence of set_ftrace_filterMasami Hiramatsu
commit fd1baf6ca2ea3550ea47f2bb0bdcf34ec764a779 upstream. If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n, there is no set_ftrace_filter and all test cases are failed, because reset_ftrace_filter() returns an error. Let's check whether set_ftrace_filter exists in reset_ftrace_filter() and clean up only set_ftrace_notrace in initialize_ftrace(). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20ftrace/selftest: Test if set_event/ftrace_pid exists before writingSteven Rostedt (VMware)
commit 6e55f320f00e4db7144a4906dd8ac53701891e31 upstream. While testing on a very old kernel (3.5), the tests failed because the write to set_event_pid in the setup code, did not exist. The tests themselves could pass, but the setup failed causing an error. Other files test for existance before writing to them. Do the same for set_event_pid and set_ftrace_pid. Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests: netfilter: use randomized netns namesFlorian Westphal
commit 5a2e6af81807d4616f9839ad0ae7d1313b45c64d upstream. Using ns0, ns1, etc. isn't a good idea, they might exist already. Use a random suffix. Also, older nft versions don't support "-" as alias for stdin, so use /dev/stdin instead. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20libtraceevent: Copy pkg-config file to output folder when using O=Sudip Mukherjee
commit 15b3904f8e884e0d34d5f09906cf6526d0b889a2 upstream. When we use 'O=' with make to build libtraceevent in a separate folder it still copies 'libtraceevent.pc' to its source folder. Modify the Makefile so that it uses the output folder to copy the pkg-config file and install from there. Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20libtraceevent: Fix lib installation with O=Sudip Mukherjee
commit 587db8ebdac2c5eb3a8851e16b26f2e2711ab797 upstream. When we use 'O=' with make to build libtraceevent in a separate folder it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the error: INSTALL /home/sudip/linux/obj-trace/libtraceevent.a INSTALL /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0 cp: cannot stat 'libtraceevent.a': No such file or directory Makefile:225: recipe for target 'install_lib' failed make: *** [install_lib] Error 1 I used the command: make O=../../../obj-trace DESTDIR=~/test prefix==/usr install It turns out libtraceevent Makefile, even though it builds in a separate folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its source folder. So, add the 'OUTPUT' prefix to the source path so that 'make' looks for the files in the correct place. Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20perf callchain: Fix segfault in thread__resolve_callchain_sample()Adrian Hunter
commit aceb98261ea7d9fe38f9c140c5531f0b13623832 upstream. Do not dereference 'chain' when it is NULL. $ perf record -e intel_pt//u -e branch-misses:u uname $ perf report --itrace=l --branch-history perf: Segmentation fault Fixes: e9024d519d89 ("perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20191114142538.4097-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30Mathieu Desnoyers
commit 8df34c56321479bfa1ec732c675b686c2b4df412 upstream. glibc 2.30 introduces gettid() in public headers, which clashes with the internal static definition within rseq selftests. Rename gettid() to rseq_gettid() to eliminate this symbol name clash. Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECVSargun Dhillon
commit e4ab5ccc357b978999328fadae164e098c26fa40 upstream. This adds logic to the user_notification_basic test to set a member of struct seccomp_notif to an invalid value to ensure that the kernel returns EINVAL if any of the struct seccomp_notif members are set to invalid values. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-20selftests/seccomp: Zero out seccomp_notifSargun Dhillon
commit 88c13f8bd71472fbab5338b01d99122908c77e53 upstream. The seccomp_notif structure should be zeroed out prior to calling the SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check whether these structures were zeroed out or not, so these worked. This patch zeroes out the seccomp_notif data structure prior to calling the ioctl. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-05 16:35:36 +0000