summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2020-08-19tools, build: Propagate build failures from tools/build/Makefile.buildAndrii Nakryiko
[ Upstream commit a278f3d8191228212c553a5d4303fa603214b717 ] The '&&' command seems to have a bad effect when $(cmd_$(1)) exits with non-zero effect: the command failure is masked (despite `set -e`) and all but the first command of $(dep-cmd) is executed (successfully, as they are mostly printfs), thus overall returning 0 in the end. This means in practice that despite compilation errors, tools's build Makefile will return success. We see this very reliably with libbpf's Makefile, which doesn't get compilation error propagated properly. This in turns causes issues with selftests build, as well as bpftool and other projects that rely on building libbpf. The fix is simple: don't use &&. Given `set -e`, we don't need to chain commands with &&. The shell will exit on first failure, giving desired behavior and propagating error properly. Fixes: 275e2d95591e ("tools build: Move dependency copy into function") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20200731024244.872574-1-andriin@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19selftests/powerpc: Fix online CPU selectionSandipan Das
[ Upstream commit dfa03fff86027e58c8dba5c03ae68150d4e513ad ] The size of the CPU affinity mask must be large enough for systems with a very large number of CPUs. Otherwise, tests which try to determine the first online CPU by calling sched_getaffinity() will fail. This makes sure that the size of the allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs_conf(). Fixes: 3752e453f6ba ("selftests/powerpc: Add tests of PMU EBBs") Reported-by: Shirisha Ganta <shiganta@in.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a408c4b8e9a23bb39b539417a21eb0ff47bb5127.1596084858.git.sandipan@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19selftests/powerpc: Fix CPU affinity for child processHarish
[ Upstream commit 854eb5022be04f81e318765f089f41a57c8e5d83 ] On systems with large number of cpus, test fails trying to set affinity by calling sched_setaffinity() with smaller size for affinity mask. This patch fixes it by making sure that the size of allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs(). Fixes: 00b7ec5c9cf3 ("selftests/powerpc: Import Anton's context_switch2 benchmark") Reported-by: Shirisha Ganta <shiganta@in.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Harish <harish@linux.ibm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Reviewed-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200609081423.529664-1-harish@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-11selftests/net: relax cpu affinity requirement in msg_zerocopy testWillem de Bruijn
[ Upstream commit 16f6458f2478b55e2b628797bc81a4455045c74e ] The msg_zerocopy test pins the sender and receiver threads to separate cores to reduce variance between runs. But it hardcodes the cores and skips core 0, so it fails on machines with the selected cores offline, or simply fewer cores. The test mainly gives code coverage in automated runs. The throughput of zerocopy ('-z') and non-zerocopy runs is logged for manual inspection. Continue even when sched_setaffinity fails. Just log to warn anyone interpreting the data. Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-11tools lib traceevent: Fix memory leak in process_dynamic_array_lenPhilippe Duplessis-Guindon
[ Upstream commit e24c6447ccb7b1a01f9bf0aec94939e6450c0b4d ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05selftests/net: psock_fanout: fix clang issues for target arch PowerPCTanner Love
[ Upstream commit 64f9ede2274980076423583683d44480909b7a40 ] Clang 9 threw: warning: format specifies type 'unsigned short' but the argument has \ type 'int' [-Wformat] typeflags, PORT_BASE, PORT_BASE + port_off); Tested: make -C tools/testing/selftests TARGETS="net" run_tests Fixes: 77f65ebdca50 ("packet: packet fanout rollover during socket overload") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05selftests/net: rxtimestamp: fix clang issues for target arch PowerPCTanner Love
[ Upstream commit 955cbe91bcf782c09afe369c95a20f0a4b6dcc3c ] The signedness of char is implementation-dependent. Some systems (including PowerPC and ARM) use unsigned char. Clang 9 threw: warning: result of comparison of constant -1 with expression of type \ 'char' is always true [-Wtautological-constant-out-of-range-compare] &arg_index)) != -1) { Tested: make -C tools/testing/selftests TARGETS="net" run_tests Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22perf stat: Zero all the 'ena' and 'run' array slot stats for interval modeJin Yao
commit 0e0bf1ea1147fcf74eab19c2d3c853cc3740a72f upstream. As the code comments in perf_stat_process_counter() say, we calculate counter's data every interval, and the display code shows ps->res_stats avg value. We need to zero the stats for interval mode. But the current code only zeros the res_stats[0], it doesn't zero the res_stats[1] and res_stats[2], which are for ena and run of counter. This patch zeros the whole res_stats[] for interval mode. Fixes: 51fd2df1e882 ("perf stat: Fix interval output values") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22perf: Make perf able to build with latest libbfdChangbin Du
commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 upstream. libbfd has changed the bfd_section_* macros to inline functions bfd_section_<field> since 2019-09-18. See below two commits: o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html This fix make perf able to build with both old and new libbfd. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jianmin Wang <jianmin@iscas.ac.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-25perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()Gaurav Singh
[ Upstream commit 11b6e5482e178055ec1f2444b55f2518713809d1 ] The 'evname' variable can be NULL, as it is checked a few lines back, check it before using. Fixes: 9e207ddfa207 ("perf report: Show call graph from reference events") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/ Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25selftests/net: in timestamping, strncpy needs to preserve null bytetannerlove
[ Upstream commit 8027bc0307ce59759b90679fa5d8b22949586d20 ] If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this: timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25NTB: ntb_test: Fix bug when counting remote filesLogan Gunthorpe
[ Upstream commit 2130c0ba69d69bb21f5c52787f2587db00d13d8a ] When remote files are counted in get_files_count, without using SSH, the code returns 0 because there is a colon prepended to $LOC. $VPATH should have been used instead of $LOC. Fixes: 06bd0407d06c ("NTB: ntb_test: Update ntb_tool Scratchpad tests") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25selftests/vm/pkeys: fix alloc_random_pkey() to make it really randomRam Pai
[ Upstream commit 6e373263ce07eeaa6410843179535fbdf561fc31 ] alloc_random_pkey() was allocating the same pkey every time. Not all pkeys were geting tested. This fixes it. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/0162f55816d4e783a0d6e49e554d0ab9a3c9a23b.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22perf symbols: Fix debuginfo search for UbuntuAdrian Hunter
commit 85afd35575a3c1a3a905722dde5ee70b49282e70 upstream. Reportedly, from 19.10 Ubuntu has begun mixing up the location of some debug symbol files, putting files expected to be in /usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding another dso_binary_type. Example on Ubuntu 20.04 Before: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data ] $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4100 uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4df0 uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4e18 uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc5128 After: $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start Reported-by: Travis Downs <travis.downs@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22perf probe: Check address correctness by map instead of _etextMasami Hiramatsu
commit 2ae5d0d7d8868df7c05c2013c0b9cddd4d40610e upstream. Since commit 03db8b583d1c ("perf tools: Fix maps__find_symbol_by_name()") introduced map address range check in maps__find_symbol_by_name(), we can not get "_etext" from kernel map because _etext is placed on the edge of the kernel .text section (= kernel map in perf.) To fix this issue, this checks the address correctness by map address range information (map->start and map->end) instead of using _etext address. This can cause an error if the target inlined function is embedded in both __init function and normal function. For exaample, request_resource() is a normal function but also embedded in __init reserve_setup(). In this case, the probe point in reserve_setup() must be skipped. However, without this fix, it failes to setup all probe points: # ./perf probe -v request_resource probe-definition(0): request_resource symbol:request_resource file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux for symbols Open Debuginfo file: /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux Try to find probe point from debuginfo. Matched function: request_resource [15e29ad] found inline addr: 0xffffffff82fbf892 Probe point found: reserve_setup+204 found inline addr: 0xffffffff810e9790 Probe point found: request_resource+0 Found 2 probe_trace_events. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Opening /sys/kernel/debug/tracing//README write=0 Writing event: p:probe/request_resource _text+33290386 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) # With this fix, # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: (null):(null) (on request_resource) probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # Fixes: 03db8b583d1c ("perf tools: Fix maps__find_symbol_by_name()") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158763967332.30755.4922496724365529088.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22perf probe: Fix to check blacklist address correctlyMasami Hiramatsu
commit 80526491c2ca6abc028c0f0dbb0707a1f35fb18a upstream. Fix to check kprobe blacklist address correctly with relocated address by adjusting debuginfo address. Since the address in the debuginfo is same as objdump, it is different from relocated kernel address with KASLR. Thus, 'perf probe' always misses to catch the blacklisted addresses. Without this patch, 'perf probe' can not detect the blacklist addresses on a KASLR enabled kernel. # perf probe kprobe_dispatcher Failed to write event: Invalid argument Error: Failed to add events. # With this patch, it correctly shows the error message. # perf probe kprobe_dispatcher kprobe_dispatcher is blacklisted function, skip it. Probe point 'kprobe_dispatcher' not found. Error: Failed to add events. # Fixes: 9aaf5a5f479b ("perf probe: Check kprobes blacklist when adding new events") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22perf probe: Do not show the skipped eventsMasami Hiramatsu
commit f41ebe9defacddeae96a872a33f0f22ced0bfcef upstream. When a probe point is expanded to several places (like inlined) and if some of them are skipped because of blacklisted or __init function, those trace_events has no event name. It must be skipped while showing results. Without this fix, you can see "(null):(null)" on the list, # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: (null):(null) (on request_resource) probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # With this fix, it is ignored: # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # Fixes: 5a51fcd1f30c ("perf probe: Skip kernel symbols which is out of .text") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158763968263.30755.12800484151476026340.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22selftests/bpf: Fix memory leak in extract_build_id()Andrii Nakryiko
[ Upstream commit 9f56bb531a809ecaa7f0ddca61d2cf3adc1cb81a ] getline() allocates string, which has to be freed. Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22tools api fs: Make xxx__mountpoint() more scalableStephane Eranian
[ Upstream commit c6fddb28bad26e5472cb7acf7b04cd5126f1a4ab ] The xxx_mountpoint() interface provided by fs.c finds mount points for common pseudo filesystems. The first time xxx_mountpoint() is invoked, it scans the mount table (/proc/mounts) looking for a match. If found, it is cached. The price to scan /proc/mounts is paid once if the mount is found. When the mount point is not found, subsequent calls to xxx_mountpoint() scan /proc/mounts over and over again. There is no caching. This causes a scaling issue in perf record with hugeltbfs__mountpoint(). The function is called for each process found in synthesize__mmap_events(). If the machine has thousands of processes and if the /proc/mounts has many entries this could cause major overhead in perf record. We have observed multi-second slowdowns on some configurations. As an example on a laptop: Before: $ sudo umount /dev/hugepages $ strace -e trace=openat -o /tmp/tt perf record -a ls $ fgrep mounts /tmp/tt 285 After: $ sudo umount /dev/hugepages $ strace -e trace=openat -o /tmp/tt perf record -a ls $ fgrep mounts /tmp/tt 1 One could argue that the non-caching in case the moint point is not found is intentional. That way subsequent calls may discover a moint point if the sysadmin mounts the filesystem. But the same argument could be made against caching the mount point. It could be unmounted causing errors. It all depends on the intent of the interface. This patch assumes it is expected to scan /proc/mounts once. The patch documents the caching behavior in the fs.h header file. An alternative would be to just fix perf record. But it would solve the problem with hugetlbs__mountpoint() but there could be similar issues (possibly down the line) with other xxx_mountpoint() calls in perf or other tools. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrey Zhizhikin <andrey.z@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22objtool: Ignore empty alternativesJulien Thierry
[ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ] The .alternatives section can contain entries with no original instructions. Objtool will currently crash when handling such an entry. Just skip that entry, but still give a warning to discourage useless entries. Signed-off-by: Julien Thierry <jthierry@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22selftests/net: in rxtimestamp getopt_long needs terminating null entrytannerlove
[ Upstream commit 865a6cbb2288f8af7f9dc3b153c61b7014fdcf1e ] getopt_long requires the last element to be filled with zeros. Otherwise, passing an unrecognized option can cause a segfault. Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22perf probe: Accept the instance number of kretprobe eventMasami Hiramatsu
[ Upstream commit c6aab66a728b6518772c74bd9dff66e1a1c652fd ] Since the commit 6a13a0d7b4d1 ("ftrace/kprobe: Show the maxactive number on kprobe_events") introduced to show the instance number of kretprobe events, the length of the 1st format of the kprobe event will not 1, but it can be longer. This caused a parser error in perf-probe. Skip the length check the 1st format of the kprobe event to accept this instance number. Without this fix: # perf probe -a vfs_read%return Added new event: probe:vfs_read__return (on vfs_read%return) You can now use it in all perf tools, such as: perf record -e probe:vfs_read__return -aR sleep 1 # perf probe -l Semantic error :Failed to parse event name: r16:probe/vfs_read__return Error: Failed to show event list. And with this fixes: # perf probe -a vfs_read%return ... # perf probe -l probe:vfs_read__return (on vfs_read%return) Fixes: 6a13a0d7b4d1 ("ftrace/kprobe: Show the maxactive number on kprobe_events") Reported-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Yuxuan Shui <yshuiv7@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207587 Link: http://lore.kernel.org/lkml/158877535215.26469.1113127926699134067.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22selftests: bpf: fix use of undeclared RET_IF macroLorenz Bauer
commit 634efb750435 ("selftests: bpf: Reset global state between reuseport test runs") uses a macro RET_IF which doesn't exist in the v4.19 tree. It is defined as follows: #define RET_IF(condition, tag, format...) ({ if (CHECK_FAIL(condition)) { printf(tag " " format); return; } }) CHECK_FAIL in turn is defined as: #define CHECK_FAIL(condition) ({ int __ret = !!(condition); int __save_errno = errno; if (__ret) { test__fail(); fprintf(stdout, "%s:FAIL:%d\n", __func__, __LINE__); } errno = __save_errno; __ret; }) Replace occurences of RET_IF with CHECK. This will abort the test binary if clearing the intermediate state fails. Fixes: 634efb750435 ("selftests: bpf: Reset global state between reuseport test runs") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14objtool: Fix stack offset tracking for indirect CFAsJosh Poimboeuf
commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10selftests/ipc: Fix test failure seen after initial test runTyler Hicks
[ Upstream commit b87080eab4c1377706c113fc9c0157f19ea8fed1 ] After successfully running the IPC msgque test once, subsequent runs result in a test failure: $ sudo ./run_kselftest.sh TAP version 13 1..1 # selftests: ipc: msgque # Failed to get stats for IPC queue with id 0 # Failed to dump queue: -22 # Bail out! # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 not ok 1 selftests: ipc: msgque # exit=1 The dump_queue() function loops through the possible message queue index values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id represents the index value. The first time the test is ran, the initial index value of 0 is valid and the test is able to complete. The index value of 0 is not valid in subsequent test runs and the loop attempts to try index values of 1, 2, 3, and so on until a valid index value is found that corresponds to the message queue created earlier in the test. The msgctl() syscall returns -1 and sets errno to EINVAL when invalid index values are used. The test failure is caused by incorrectly comparing errno to -EINVAL when cycling through possible index values. Fix invalid test failures on subsequent runs of the msgque test by correctly comparing errno values to a non-negated EINVAL. Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02objtool: Support Clang non-section symbols in ORC dumpJosh Poimboeuf
[ Upstream commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 ] Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02objtool: Fix CONFIG_UBSAN_TRAP unreachable warningsJosh Poimboeuf
[ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29tools/vm: fix cross-compile buildLucas Stach
commit cf01699ee220c38099eb3e43ce3d10690c8b7060 upstream. Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved the setup of the CC variable to tools/scripts/Makefile.include to make the behavior consistent across all the tools Makefiles. As the vm tools missed the include we end up with the wrong CC in a cross-compiling evironment. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Kelly <martin@martingkelly.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tracing/selftests: Turn off timeout settingSteven Rostedt (VMware)
[ Upstream commit b43e78f65b1d35fd3e13c7b23f9b64ea83c9ad3a ] As the ftrace selftests can run for a long period of time, disable the timeout that the general selftests have. If a selftest hangs, then it probably means the machine will hang too. Link: https://lore.kernel.org/r/alpine.LSU.2.21.1911131604170.18679@pobox.suse.cz Suggested-by: Miroslav Benes <mbenes@suse.cz> Tested-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29selftests: kmod: fix handling test numbers above 9Eric Biggers
[ Upstream commit 6d573a07528308eb77ec072c010819c359bebf6e ] get_test_count() and get_test_enabled() were broken for test numbers above 9 due to awk interpreting a field specification like '$0010' as octal rather than decimal. Fix it by stripping the leading zeroes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29bpftool: Fix printing incorrect pointer in btf_dump_ptrMartin KaFai Lau
commit 555089fdfc37ad65e0ee9b42ca40c238ff546f83 upstream. For plain text output, it incorrectly prints the pointer value "void *data". The "void *data" is actually pointing to memory that contains a bpf-map's value. The intention is to print the content of the bpf-map's value instead of printing the pointer pointing to the bpf-map's value. In this case, a member of the bpf-map's value is a pointer type. Thus, it should print the "*(void **)data". Fixes: 22c349e8db89 ("tools: bpftool: fix format strings and arguments for jsonw_printf()") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf
commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17perf tools: Support Python 3.8+ in MakefileSam Lunt
commit b9c9ce4e598e012ca7c1813fae2f4d02395807de upstream. Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com> Tested-by: He Zhe <zhe.he@windriver.com> Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: trivial@kernel.org Cc: stable@kernel.org Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17selftests: vm: drop dependencies on page flags from mlock2 testsMichal Hocko
commit eea274d64e6ea8aff2224d33d0851133a84cc7b5 upstream. It was noticed that mlock2 tests are failing after 9c4e6b1a7027f ("mm, mlock, vmscan: no more skipping pagevecs") because the patch has changed the timing on when the page is added to the unevictable LRU list and thus gains the unevictable page flag. The test was just too dependent on the implementation details which were true at the time when it was introduced. Page flags and the timing when they are set is something no userspace should ever depend on. The test should be testing only for the user observable contract of the tested syscalls. Those are defined pretty well for the mlock and there are other means for testing them. In fact this is already done and testing for page flags can be safely dropped to achieve the aimed purpose. Present bits can be checked by /proc/<pid>/smaps RSS field and the locking state by VmFlags although I would argue that Locked: field would be more appropriate. Drop all the page flag machinery and considerably simplify the test. This should be more robust for future kernel changes while checking the promised contract is still valid. Fixes: 9c4e6b1a7027f ("mm, mlock, vmscan: no more skipping pagevecs") Reported-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200324154218.GS19542@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17tools: gpio: Fix out-of-tree build regressionAnssi Hannula
commit 82f04bfe2aff428b063eefd234679b2d693228ed upstream. Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17selftests/x86/ptrace_syscall_32: Fix no-vDSO segfaultAndy Lutomirski
[ Upstream commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 ] If AT_SYSINFO is not present, don't try to call a NULL pointer. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13tools/accounting/getdelays.c: fix netlink attribute lengthDavid Ahern
commit 4054ab64e29bb05b3dfe758fff3c38a74ba753bb upstream. A recent change to the netlink code: 6e237d099fac ("netlink: Relax attr validation for fixed length types") logs a warning when programs send messages with invalid attributes (e.g., wrong length for a u32). Yafang reported this error message for tools/accounting/getdelays.c. send_cmd() is wrongly adding 1 to the attribute length. As noted in include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload length, so drop the +1. Fixes: 9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix") Reported-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Yafang Shao <laoar.shao@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13tools/power turbostat: Fix missing SYS_LPI counter on some ChromebooksLen Brown
[ Upstream commit 1f81c5efc020314b2db30d77efe228b7e117750d ] Some Chromebook BIOS' do not export an ACPI LPIT, which is how Linux finds the residency counter for CPU and SYSTEM low power states, that is exports in /sys/devices/system/cpu/cpuidle/*residency_us When these sysfs attributes are missing, check the debugfs attrubte from the pmc_core driver, which accesses the same counter value. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13tools/power turbostat: Fix gcc build warningsLen Brown
[ Upstream commit d8d005ba6afa502ca37ced5782f672c4d2fc1515 ] Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size [-Wstringop-truncation] reduce param to strncpy, to guarantee that a null byte is always copied into destination buffer. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-02perf map: Fix off by one in strncpy() size argumentdisconnect3d
commit db2c549407d4a76563c579e4768f7d6d32afefba upstream. This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in: strncmp(filename, "/system/lib/", 11) the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious". This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact. Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries") Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Keeping <john@metanate.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Lentine <mlentine@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02tools: Let O= makes handle a relative path with -C optionMasami Hiramatsu
commit be40920fbf1003c38ccdc02b571e01a75d890c82 upstream. When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path: $ make O=BUILD -C tools/perf/ make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf' BUILD: Doing 'make -j8' parallel build ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop. make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf' The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command. To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs. Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02perf probe: Do not depend on dwfl_module_addrsym()Masami Hiramatsu
commit 1efde2754275dbd9d11c6e0132a4f09facf297ab upstream. Do not depend on dwfl_module_addrsym() because it can fail on user-space shared libraries. Actually, same bug was fixed by commit 664fee3dc379 ("perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit 07d369857808 ("perf probe: Fix wrong address verification) reverted to get actual symbol address from symtab. This fixes it again by getting symbol address from DIE, and only if the DIE has only address range, it uses dwfl_module_addrsym(). Fixes: 07d369857808 ("perf probe: Fix wrong address verification) Reported-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02cpupower: avoid multiple definition with gcc -fno-commonMike Gilbert
[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ] Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables. ./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here The -fno-common option will be enabled by default in GCC 10. Bug: https://bugs.gentoo.org/707462 Signed-off-by: Mike Gilbert <floppym@gentoo.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-18perf bench futex-wake: Restore thread count default to online CPU countTommi Rantala
commit f649bd9dd5d5004543bbc3c50b829577b49f5d75 upstream. Since commit 3b2323c2c1c4 ("perf bench futex: Use cpumaps") the default number of threads the benchmark uses got changed from number of online CPUs to zero: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time. [Run 1]: Wokeup 0 of 0 threads in 0.0000 ms [...] [Run 10]: Wokeup 0 of 0 threads in 0.0000 ms Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%) Restore the old behavior by grabbing the number of online CPUs via cpu->nr: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time. [Run 1]: Wokeup 8 of 8 threads in 0.0260 ms [...] [Run 10]: Wokeup 8 of 8 threads in 0.0270 ms Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%) Fixes: 3b2323c2c1c4 ("perf bench futex: Use cpumaps") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200305083714.9381-3-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18ktest: Add timeout for ssh sync testingSteven Rostedt (VMware)
commit 4d00fc477a2ce8b6d2b09fb34ef9fe9918e7d434 upstream. Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18selftests/net/fib_tests: update addr_metric_test for peer route testingHangbin Liu
[ Upstream commit 0d29169a708bf730ede287248e429d579f432d1d ] This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testingHangbin Liu
[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ] For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <pmachata@gmail.com> Tested-by: Petr Machata <pmachata@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-11selftests: fix too long argumentJiri Benc
[ Upstream commit c363eb48ada5cf732b3f489fab799fc881097842 ] With some shells, the command construed for install of bpf selftests becomes too large due to long list of files: make[1]: execvp: /bin/sh: Argument list too long make[1]: *** [../lib.mk:73: install] Error 127 Currently, each of the file lists is replicated three times in the command: in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that by one instance by using make conditionals and separate the echo and rsync into two shell commands. (One would be inclined to just remove the '@' at the beginning of the rsync command and let 'make' echo it by itself; unfortunately, it appears that the '@' in the front of mkdir silences output also for the following commands.) Also, separate handling of each of the lists to its own shell command. The semantics of the makefile is unchanged before and after the patch. The ability of individual test directories to override INSTALL_RULE is retained. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etcArnaldo Carvalho de Melo
commit 3f7774033e6820d25beee5cf7aefa11d4968b951 upstream. We need to set actions->ms.map since 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions"), as in that patch we bail out if map is NULL. Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions") Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05perf stat: Fix shadow stats for clock eventsRavi Bangoria
commit 57ddf09173c1e7d0511ead8924675c7198e56545 upstream. Commit 0aa802a79469 ("perf stat: Get rid of extra clock display function") introduced scale and unit for clock events. Thus, perf_stat__update_shadow_stats() now saves scaled values of clock events in msecs, instead of original nsecs. But while calculating values of shadow stats we still consider clock event values in nsecs. This results in a wrong shadow stat values. Ex, # ./perf stat -e task-clock,cycles ls <SNIP> 2.60 msec task-clock:u # 0.877 CPUs utilized 2,430,564 cycles:u # 1215282.000 GHz Fix this by saving original nsec values for clock events in perf_stat__update_shadow_stats(). After patch: # ./perf stat -e task-clock,cycles ls <SNIP> 3.14 msec task-clock:u # 0.839 CPUs utilized 3,094,528 cycles:u # 0.985 GHz Suggested-by: Jiri Olsa <jolsa@redhat.com> Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: yuzhoujian@didichuxing.com Fixes: 0aa802a79469 ("perf stat: Get rid of extra clock display function") Link: http://lkml.kernel.org/r/20181116042843.24067-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-04 18:58:24 +0000