Age | Commit message (Collapse) | Author |
|
adjustments are in progress
[ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ]
In the past we've warned when ADJ_OFFSET was in progress, usually
caused by ntpd or some other time adjusting daemon running in non
steady sate, which can cause the skew calculations to be
incorrect.
Thus, this patch checks to see if the clock was being adjusted
when we fail so that we don't cause false negatives.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc7c673032fc7427087e74b75f732b43db38a256 ]
Initialize heap_type to ION_HEAP_TYPE_SYSTEM to avoid "used uninitialized"
compiler warning. heap_type gets used after initialization, this change is
to just keep the compiler happy.
root@vm-lkp-nex04-8G-7 ~/linux-v4.18-rc2/tools/testing/selftests/android# make
make[1]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[1]: Entering directory '/root/linux-v4.18-rc2/tools/testing/selftests/android/ion'
gcc -I. -I../../../../../drivers/staging/android/uapi/ -I../../../../../usr/include/ -Wall -O2 -g ionapp_export.c ipcsocket.c ionutils.c -o ionapp_export
ionapp_export.c: In function 'main':
ionapp_export.c:91:2: warning: 'heap_type' may be used uninitialized in
this function [-Wmaybe-uninitialized]
printf("heap_type: %ld, heap_size: %ld\n", heap_type, heap_size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC: Shuah Khan <shuah@kernel.org>
CC: Pintu Agarwal <pintu.ping@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d2d49495b5c0dffee5c4da5ea12ac0da6679bd08 ]
Fix to return KSFT_SKIP when test couldn't be run because AT_SYSINFO_EHDR
isn't found and gettimeofday isn't defined.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e5d772fbe7685aae0dff99f3b54158a0ec32155e ]
In addition to populating the value the payload also needs to set the
"controller temperature valid" flag.
Fixes: cdd77d3e1930 ("nfit, libnvdimm: deprecate the generic SMART ioctl")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03db8b583d1c3c84963e08e2abf6c79081da5c31 upstream.
Commit 1c5aae7710bb ("perf machine: Create maps for x86 PTI entry
trampolines") revealed a problem with maps__find_symbol_by_name() that
resulted in probes not being found e.g.
$ sudo perf probe xsk_mmap
xsk_mmap is out of .text, skip it.
Probe point 'xsk_mmap' not found.
Error: Failed to add events.
maps__find_symbol_by_name() can optionally return the map of the found
symbol. It can get the map wrong because, in fact, the symbol is found
on the map's dso, not allowing for the possibility that the dso has more
than one map. Fix by always checking the map contains the symbol.
Reported-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 1c5aae7710bb ("perf machine: Create maps for x86 PTI entry trampolines")
Link: http://lkml.kernel.org/r/20180907085116.25782-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86503bd35dec0ce363e9fdbf5299927422ed3899 upstream.
Fix a bug in the key delete code - the num_records range
from 0 to num_records-1.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2a9d5050dc84fa2060f08a52f632976923e0fa7e ]
When perf/data is recorded with the dwarf call-graph option, the
callchain shown by 'perf script' still shows the binary offsets of the
userspace symbols instead of their virtual addresses. Since the symbol
offset calculation is based on using virtual address as the ip, we see
incorrect offsets as well.
The use of virtual addresses affects the ability to find out the
line number in the corresponding source file to which an address
maps to as described in commit 67540759151a ("perf unwind: Use
addr_location::addr instead of ip for entries").
This has also been addressed by temporarily converting the virtual
address to the correponding binary offset so that it can be mapped
to the source line number correctly.
This is a follow-up for commit 19610184693c ("perf script: Show
virtual addresses instead of offsets").
This can be verified on a powerpc64le system running Fedora 27 as
shown below:
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton
# perf record -e probe_libc:inet_pton --call-graph=dwarf ping -6 -c 1 ::1
Before:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet getaddrinfo.c:537 (inlined)
__GI_getaddrinfo getaddrinfo.c:2304 (inlined)
main ping.c:519
generic_start_main libc-start.c:308 (inlined)
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
15af28 __GI___inet_pton+0xffff000099160008 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004ca0af28]
10fa53 gaih_inet+0xffff000099160f43
libc-2.26.so[ffff80004c9bfa53] (inlined)
1105b3 __GI_getaddrinfo+0xffff000099160163
libc-2.26.so[ffff80004c9c05b3] (inlined)
2d6f main+0xfffffffd9f1003df (/usr/bin/ping)
ping[fffffffecf882d6f]
2369f generic_start_main+0xffff00009916013f
libc-2.26.so[ffff80004c8d369f] (inlined)
23897 __libc_start_main+0xffff0000991600b7 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004c8d3897]
After:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet.constprop.7 getaddrinfo.c:537
getaddrinfo getaddrinfo.c:2304
main ping.c:519
generic_start_main.isra.0 libc-start.c:308
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
7fffb38aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
inet_pton.c:68
7fffb385fa53 gaih_inet.constprop.7+0xf43 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:537
7fffb38605b3 getaddrinfo+0x163 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:2304
130782d6f main+0x3df (/usr/bin/ping)
ping.c:519
7fffb377369f generic_start_main.isra.0+0x13f (/usr/lib64/libc-2.26.so)
libc-start.c:308
7fffb3773897 __libc_start_main+0xb7 (/usr/lib64/libc-2.26.so)
libc-start.c:102
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 67540759151a ("perf unwind: Use addr_location::addr instead of ip for entries")
Link: http://lkml.kernel.org/r/20180703120555.32971-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c715fcfda5a08edabaa15508742be926b7ee51db ]
For powerpc64, redundant entries in the callchain are filtered out by
determining the state of the return address and the stack frame using
DWARF debug information.
For making these filtering decisions we must analyze the debug
information for the location corresponding to the program counter value,
i.e. the first entry in the callchain, and not the LR value; otherwise,
perf may filter out either the second or the third entry in the
callchain incorrectly.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28).
Return address is still in LR and a new stack frame is not yet
allocated. The LR value, i.e. the second entry, should not be
filtered out.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000010eb10 <gaih_inet.constprop.7>:
...
10fa48: 78 bb e4 7e mr r4,r23
10fa4c: 0a 00 60 38 li r3,10
10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8>
10fa54: 00 00 00 60 nop
10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4>
...
0000000000110450 <getaddrinfo>:
...
1105a8: 54 00 ff 38 addi r7,r31,84
1105ac: 58 00 df 38 addi r6,r31,88
1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8>
1105b4: 78 1b 71 7c mr r17,r3
1105b8: 50 01 7f e8 ld r3,336(r31)
...
000000000015af20 <inet_pton>:
15af20: 0b 00 4c 3c addis r2,r12,11
15af24: e0 c1 42 38 addi r2,r2,-15904
15af28: a6 02 08 7c mflr r0
15af2c: f0 ff c1 fb std r30,-16(r1)
15af30: f8 ff e1 fb std r31,-8(r1)
...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8
# perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
# perf script
Before:
ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
13fb52d70 _init+0xbfc (/usr/bin/ping)
7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
13fb52d70 _init+0xbfc (/usr/bin/ping)
7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10).
Return address in still in LR and a new stack frame has already
been allocated but not used. The caller's caller, i.e. the third
entry, is invalid and should be filtered out and not the second
one.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000009cd90 <_int_malloc>:
9cd90: 17 00 4c 3c addis r2,r12,23
9cd94: 70 a3 42 38 addi r2,r2,-23696
9cd98: 26 00 80 7d mfcr r12
9cd9c: f8 ff e1 fb std r31,-8(r1)
9cda0: 17 00 e4 3b addi r31,r4,23
9cda4: d8 ff 61 fb std r27,-40(r1)
9cda8: 78 23 9b 7c mr r27,r4
9cdac: 1f 00 bf 2b cmpldi cr7,r31,31
9cdb0: f0 ff c1 fb std r30,-16(r1)
9cdb4: b0 ff c1 fa std r22,-80(r1)
9cdb8: 78 1b 7e 7c mr r30,r3
9cdbc: 08 00 81 91 stw r12,8(r1)
9cdc0: 11 ff 21 f8 stdu r1,-240(r1)
9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180>
9cdc8: 20 00 a4 2b cmpldi cr7,r4,32
...
9cf08: 00 00 00 60 nop
9cf0c: 00 00 42 60 ori r2,r2,0
9cf10: e4 06 ff 7b rldicr r31,r31,0,59
9cf14: 40 f8 a4 7f cmpld cr7,r4,r31
9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0>
...
000000000009e3c0 <tcache_init.part.4>:
...
9e420: 40 02 80 38 li r4,576
9e424: 78 fb e3 7f mr r3,r31
9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8>
9e42c: 00 00 a3 2f cmpdi cr7,r3,0
9e430: 78 1b 7e 7c mr r30,r3
...
000000000009f7a0 <__libc_malloc>:
...
9f8f8: 00 00 89 2f cmpwi cr7,r9,0
9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78>
9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8>
9f904: 00 00 00 60 nop
9f908: e8 90 22 e9 ld r9,-28440(r2)
...
# perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180
# perf record -e probe_libc:_int_malloc -g ./test-malloc
# perf script
Before:
test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so)
7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
100006b4 main+0x38 (/home/testuser/test-malloc)
7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so)
7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
100006b4 main+0x38 (/home/sandipan/test-malloc)
7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info")
Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9068533e4f470daf2b0f29c71d865990acd8826e ]
For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.
The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.
Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000015af20 <inet_pton>:
15af20: 0b 00 4c 3c addis r2,r12,11
15af24: e0 c1 42 38 addi r2,r2,-15904
15af28: a6 02 08 7c mflr r0
15af2c: f0 ff c1 fb std r30,-16(r1)
15af30: f8 ff e1 fb std r31,-8(r1)
15af34: 78 1b 7f 7c mr r31,r3
15af38: 78 23 83 7c mr r3,r4
15af3c: 78 2b be 7c mr r30,r5
15af40: 10 00 01 f8 std r0,16(r1)
15af44: c1 ff 21 f8 stdu r1,-64(r1)
15af48: 28 00 81 f8 std r4,40(r1)
...
# readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
...
00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
LOC CFA r30 r31 ra
000000000015af20 r1+0 u u u
000000000015af34 r1+0 c-16 c-8 r0
000000000015af48 r1+64 c-16 c-8 c+16
000000000015af5c r1+0 c-16 c-8 c+16
000000000015af78 r1+0 u u
...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
# perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
# perf script
Before:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 46b3722cc7765582354488da633aafffcb138458 ]
We occasionaly hit following assert failure in 'perf top', when processing the
/proc info in multiple threads.
perf: ...include/linux/refcount.h:109: refcount_inc:
Assertion `!(!refcount_inc_not_zero(r))' failed.
The gdb backtrace looks like this:
[Switching to Thread 0x7ffff11ba700 (LWP 13749)]
0x00007ffff50839fb in raise () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff50839fb in raise () from /lib64/libc.so.6
#1 0x00007ffff5085800 in abort () from /lib64/libc.so.6
#2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0)
at ...include/linux/refcount.h:109
#5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0)
at util/comm.c:24
#6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2",
root=0xbed5c0 <comm_str_root>) at util/comm.c:72
#7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2",
root=0xbed5c0 <comm_str_root>) at util/comm.c:95
#8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2",
timestamp=0, exec=false) at util/comm.c:111
#9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57
#10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38,
threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457
#11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38,
...
The failing assertion is this one:
REFCOUNT_WARN(!refcount_inc_not_zero(r), ...
The problem is that we keep global comm_str_root list, which
is accessed by multiple threads during the 'perf top' startup
and following 2 paths can race:
thread 1:
...
thread__new
comm__new
comm_str__findnew
down_write(&comm_str_lock);
__comm_str__findnew
comm_str__get
thread 2:
...
comm__override or comm__free
comm_str__put
refcount_dec_and_test
down_write(&comm_str_lock);
rb_erase(&cs->rb_node, &comm_str_root);
Because thread 2 first decrements the refcnt and only after then it removes the
struct comm_str from the list, the thread 1 can find this object on the list
with refcnt equls to 0 and hit the assert.
This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects
that already dropped the refcnt to 0. For the rest of the objects we take the
refcnt before comparing its name and release it afterwards with comm_str__put,
which can also release the object completely.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 83e3b6d73e66a10088f362b08b99c36fec3a14e7 ]
If there is a mismatch in the perf script output, this test fails and
exits before the event and temporary files created during its execution
are cleaned up.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 18655
ping 18674 [013] 24511.496995: probe_libc:inet_pton: (7fffa6b423b0)
7fffa6b423b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
FAIL: expected backtrace entry "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/power8/libc-2.26.so\)$" got "7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# ls /tmp/expected.* /tmp/perf.data.* /tmp/perf.script.*
/tmp/expected.u31 /tmp/perf.data.Pki /tmp/perf.script.Bhs
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Cleanup of the event and the temporary files are now ensured by allowing
the cleanup code to be executed even if the lines from the backtrace do
not match their expected patterns instead of simply exiting from the
point of failure.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/ce9fb091dd3028fba8749a1a267cfbcb264bbfb1.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 60089e42d38438772e2f83334e3e5b7497009366 ]
If the event 'probe_libc:inet_pton' already exists, this test fails and
deletes the existing event before exiting. This will then pass for any
subsequent executions.
Instead of skipping to deleting the existing event because of failing to
add a new event, a duplicate event is now created and the script
continues with the usual checks. Only the new duplicate event that is
created at the beginning of the test is deleted as a part of the
cleanups in the end. All existing events remain as it is.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf probe -x /usr/lib64/power8/libc-2.26.so -a inet_pton
Added new event:
probe_libc:inet_pton (on inet_pton in /usr/lib64/power8/libc-2.26.so)
Before:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21302
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# perf probe --list
After:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21490
ping 21513 [035] 39357.565561: probe_libc:inet_pton_1: (7fffa4c623b0)
7fffa4c623b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa4c190dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
7fffa4c19c4c getaddrinfo+0x15c (/usr/lib64/power8/libc-2.26.so)
111d93c20 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/e11fecff96e6cf4c65cdbd9012463513d7b8356c.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3eae52f842329a95f8549124079518231c0daba8 ]
For powerpc64, this test currently fails due to a mismatch in the
expected output.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
Before:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23948
ping 23965 [003] 71136.075084: probe_libc:inet_pton: (7fff996aaf28)
7fff996aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 2 "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc-2.26.so\)$" got "7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
After:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 24638
ping 24655 [001] 71208.525396: probe_libc:inet_pton: (7fffa245af28)
7fffa245af28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa240fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fffa24105b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
138d52d70 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/49621ec5f37109f0655e5a8c32287ad68d85a1e5.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e8fedff1cc729fd227924305152ccc6f580e8c83 ]
Stephan reported, that pipe mode does not carry the group information
and thus the piped report won't display the grouped output for following
command:
# perf record -e '{cycles,instructions,branches}' -a sleep 4 | perf report
It has no idea about the group setup, so it will display events
separately:
# Overhead Command Shared Object ...
# ........ ............... .......................
#
6.71% swapper [kernel.kallsyms]
2.28% offlineimap libpython2.7.so.1.0
0.78% perf [kernel.kallsyms]
...
Fix GROUP_DESC feature record to be synthesized in pipe mode, so the
report output is grouped if there are groups defined in record:
# Overhead Command Shared ...
# ........................ ............... .......
#
7.57% 0.16% 0.30% swapper [kernel
1.87% 3.15% 2.46% offlineimap libpyth
1.33% 0.00% 0.00% perf [kernel
...
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180712135202.14774-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9ef0112442bdddef5fb55adf20b3a5464b33de75 ]
Perf test 40 for example has several subtests numbered 1-4 when
displaying the start of the subtest. When the subtest results
are displayed the subtests are numbered 0-3.
Use this command to generate trace output:
[root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1
Fix this by adjusting the subtest number when show the
subtest result.
Output before:
[root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 0: Ok
40.2: BPF pinning :
BPF filter subtest 1: Ok
40.3: BPF prologue generation :
BPF filter subtest 2: Ok
40.4: BPF relocation checker :
BPF filter subtest 3: Ok
[root@s35lp76 perf]#
Output after:
root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 1: Ok
40.2: BPF pinning :
BPF filter subtest 2: Ok
40.3: BPF prologue generation :
BPF filter subtest 3: Ok
40.4: BPF relocation checker :
BPF filter subtest 4: Ok
[root@s35lp76 ~]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 45df5d3dc0c7289c1e67afe6d2ba806ad5174314 ]
The mock / test version of pmem_direct_access() needs to check the
validity of pointers kaddr and pfn for NULL assignment. If anyone
equals to NULL, it doesn't need to calculate the value.
If pointer equals to NULL, that is to say callers may have no need for
kaddr or pfn, so this patch is prepared for allowing them to pass in
NULL instead of having to pass in a local pointer or variable that
they then just throw away.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 83868bf71d2eb7700b37f1ea188007f0125e4ee4 ]
The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.
However all listed examples are installing its header files in
/usr/lib/<tool-name>/...[/include]/header.h
and not in
/usr/lib/include/<tool-name>/.../header.h.
Background information:
Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.
In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem. One of those
paths should contain header files like stdbool.h.
In order to get this path, gcc is invoked with:
- on Fedora 28 (with 4.18 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
=> If perf is installed, this is: /usr/lib/include
On my machine this directory is only containing the directory "perf".
If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include
- on Ubuntu 18.04 (with 4.15 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
=> gcc returns the correct path even if perf is installed.
In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.
To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h
Output before using the command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/include/perf/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Output after using command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/perf/include/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Committer testing:
While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.
We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:
# tail -8 /root/lib/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4
0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5
0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ...
0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6
0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987
0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ...
0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0
#
Suggested-by: Stefan Liebler <stli@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 1b16fffa389d ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 95035c5e167ae6e740b1ddd30210ae0eaf39a5db ]
'perf record' will error out if both --delay and LBR are applied.
For example:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
Error:
dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
#
A dummy event is added implicitly for initial delay, which has the same
configurations as real sampling events. The dummy event is a software
event. If LBR is configured, perf must error out.
The dummy event will only be used to track PERF_RECORD_MMAP while perf
waits for the initial delay to enable the real events. The BRANCH_STACK
bit can be safely cleared for the dummy event.
After applying the patch:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ]
#
Reported-by: Sunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531145722-16404-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73978332572ccf5e364c31e9a70ba953f8202b46 ]
'perf c2c' scans read/write accesses and tries to find false sharing
cases, so when the events it wants were not asked for or ended up not
taking place, we get no histograms.
So do not try to display entry details if there's not any. Currently
this ends up in crash:
$ perf c2c report # then press 'd'
perf: Segmentation fault
$
Committer testing:
Before:
Record a perf.data file without events of interest to 'perf c2c report',
then call it and press 'd':
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (6 samples) ]
# perf c2c report
perf: Segmentation fault
-------- backtrace --------
perf[0x5b1d2a]
/lib64/libc.so.6(+0x346df)[0x7fcb566e36df]
perf[0x46fcae]
perf[0x4a9f1e]
perf[0x4aa220]
perf(main+0x301)[0x42c561]
/lib64/libc.so.6(__libc_start_main+0xe9)[0x7fcb566cff29]
perf(_start+0x29)[0x42c999]
#
After the patch the segfault doesn't take place, a follow up patch to
tell the user why nothing changes when 'd' is pressed would be good.
Reported-by: rodia@autistici.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f1c5fd4d0bb9 ("perf c2c report: Add TUI cacheline browser")
Link: http://lkml.kernel.org/r/20180724062008.26126-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 21b8732eb4479b579bda9ee38e62b2c312c2a0e5 ]
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:
~# strace perf
execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
+++ killed by SIGSEGV +++
Segmentation fault
objdump -x shows that .bss section has a huge size of 24Mbytes:
27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3
With especially the following objects having quite big size:
10205f80 l O .bss 00140000 runtime_cycles_stats
10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats
10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats
105c5f80 l O .bss 00140000 runtime_branches_stats
10705f80 l O .bss 00140000 runtime_cacherefs_stats
10845f80 l O .bss 00140000 runtime_l1_dcache_stats
10985f80 l O .bss 00140000 runtime_l1_icache_stats
10ac5f80 l O .bss 00140000 runtime_ll_cache_stats
10c05f80 l O .bss 00140000 runtime_itlb_cache_stats
10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats
10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats
10fc5f80 l O .bss 00140000 runtime_transaction_stats
11105f80 l O .bss 00140000 runtime_elision_stats
11245f80 l O .bss 00140000 runtime_topdown_total_slots
11385f80 l O .bss 00140000 runtime_topdown_slots_retired
114c5f80 l O .bss 00140000 runtime_topdown_slots_issued
11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles
11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles
This is due to commit 4d255766d28b1 ("perf: Bump max number of cpus
to 1024"), because many tables are sized with MAX_NR_CPUS
This patch gives the opportunity to redefine MAX_NR_CPUS via
$ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0069fb854364da79fd99236ea620affc8e1152d5 ]
Commit fbeb1603bf4e ("bpf: verifier: MOV64 don't mark dst reg unbounded")
revealed a typo in commit fb30d4b71214 ("bpf: Add tests for map-in-map"):
BPF_MOV64_REG(BPF_REG_0, 0) was used instead of
BPF_MOV64_IMM(BPF_REG_0, 0).
I've noticed the problem by running bpf kselftests.
Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Arthur Fabre <afabre@cloudflare.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 757a9a39d483ae415a712388c33d4042a98b751f ]
Match patterns for some connmark tests contain duplicate whitespace that is
not present in actual tc output. This causes tests to fail because they
can't match required action, even when it was successfully created.
Fixes: 1dad0f9ffff7 ("tc-testing: add connmark action tests")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0c62f8a820b7fdeacf5ad9f9e24b53043d372c97 ]
Test 6fb4 creates one mirred and one pipe action, but only flushes mirred
on teardown. Leaking pipe action causes failures in other tests.
Add additional teardown command to also flush gact actions.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7c27a26e1ed5a7dd709aa19685d2c98f64e1cf0c ]
There are some powerpc selftests, as tm/tm-unavailable, that run for a long
period (>120 seconds), and if it is interrupted, as pressing CRTL-C
(SIGINT), the foreground process (harness) dies but the child process and
threads continue to execute (with PPID = 1 now) in background.
In this case, you'd think the whole test exited, but there are remaining
threads and processes being executed in background. Sometimes these
zombies processes are doing annoying things, as consuming the whole CPU or
dumping things to STDOUT.
This patch fixes this problem by attaching an empty signal handler to
SIGINT in the harness process. This handler will interrupt (EINTR) the
parent process waitpid() call, letting the code to follow through the
normal flow, which will kill all the processes in the child process group.
This patch also fixes a typo.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 354b064b8ebc1e1ede58550ca9e08bfa81e6af43 ]
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.
During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location. In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.
This can be verified on a powerpc64le system as shown below.
$ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
...
c000000000414290 T __se_sys_open
c000000000414290 T sys_open
$ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"
c000000000414290 <__se_sys_open>:
c000000000414290: 19 01 4c 3c addis r2,r12,281
c000000000414294: 70 c4 42 38 addi r2,r2,-15248
c000000000414298: a6 02 08 7c mflr r0
c00000000041429c: e8 ff a1 fb std r29,-24(r1)
c0000000004142a0: f0 ff c1 fb std r30,-16(r1)
c0000000004142a4: f8 ff e1 fb std r31,-8(r1)
c0000000004142a8: 10 00 01 f8 std r0,16(r1)
c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1)
c0000000004142b0: 78 23 9f 7c mr r31,r4
c0000000004142b4: 78 1b 7e 7c mr r30,r3
For both the entry probe and the return probe, the probe location
should be _text+4276888 (0xc000000000414298). Since another alias
exists for 'sys_open', the post-processing code will end up adding
the offset (8 for powerpc64le) twice and perf will attempt to add
the probe at _text+4276896 (0xc0000000004142a0) instead.
Before:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276896
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276896
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276896
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
After:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276888
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276888
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276888
Added new event:
probe:sys_open__return (on sys_open%return)
...
Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 99e608b5954c ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3f4417d693b43fa240ac8bde4487f67745ca23d8 ]
The argument to nsinfo__copy() was assumed to be valid, but some code paths
exist that will lead to NULL being passed.
In particular, running 'perf script -D' on a perf.data file containing an
PERF_RECORD_MMAP event associating the '[vdso]' dso with pid 0 earlier in
the event stream will lead to a segfault.
Since all calling code is already checking for a non-null return value,
just return NULL for this case as well.
Signed-off-by: Benno Evers <bevers@mesosphere.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180810133614.9925-1-bevers@mesosphere.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 344353366591acf659a0d0dea498611da78d67e2 ]
The auxtrace init variable 'err' was not being initialized, leading perf
to abort early in an SPE record command when there was no explicit
error, rather only based whatever memory contents were on the stack.
Initialize it explicitly on getting an SPE successfully, the same way
cs-etm does.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Link: http://lkml.kernel.org/r/20180810174512.52900813e57cbccf18ce99a2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99cbbe56eb8bede625f410ab62ba34673ffa7d21 upstream.
When the number of queues grows beyond 32, the array of queues is
resized but not all members were being copied. Fix by also copying
'tid', 'cpu' and 'set'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e502789302a6e ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a95c8994509c55abf1e38c0cc037b1205725e21 upstream.
With commit eca0fa28cd0d ("perf record: Provide detailed information on
s390 CPU") s390 platform provides detailed type/model/capacity
information in the CPU identifier string instead of just "IBM/S390".
This breaks 'perf kvm' support which uses hard coded string IBM/S390 to
compare with the CPU identifier string. Fix this by changing the
comparison.
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU")
Link: http://lkml.kernel.org/r/20180712070936.67547-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e24f14b0ff985f3e09e573ba1134bfdf42987e05 upstream.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I ran into the same issue as a009f1f396d0 ("selftests/bpf:
test_sockmap, timing improvements") where I had a broken
pipe error on the socket due to remote end timing out on
select and then shutting down it's sockets while the other
side was still sending. We may need to do a bigger rework
in general on the test_sockmap.c, but for now increase it
to a more suitable timeout.
Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes the tools/lib/bpf/btf.[ch] to LGPL which
is inline with libbpf also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes for perf:
Kernel side:
- Fix the hardcoded index of extra PCI devices on Broadwell which
caused a resource conflict and triggered warnings on CPU hotplug.
Tooling:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and x86's
memcpy_64.s (used in 'perf bench mem'), silencing the respective
warnings during the perf tools build.
- Fix the build on the alpine:edge distro"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devices
perf tools: Fix the build on the alpine:edge distro
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
tools headers uapi: Refresh linux/bpf.h copy
tools headers powerpc: Update asm/unistd.h copy to pick new
tools headers uapi: Update tools's copy of linux/perf_event.h
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-08-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix bpftool percpu_array dump by using correct roundup to next
multiple of 8 for the value size, from Yonghong.
2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to
allocator since driver will recycle frame anyway in case of an
error, from Jakub.
3) Fix up BPF test_lwt_seg6local test cases to final iproute2
syntax, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The shell file for test_lwt_seg6local contains an early iproute2 syntax
for installing a seg6local End.BPF route. iproute2 support for this
feature has recently been upstreamed, but with an additional keyword
required. This patch updates test_lwt_seg6local.sh to the definitive
iproute2 syntax
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
use actual protocol family passed by user rather than hardcoded
AF_INTE6 to cerate sockets.
current code is not working for IPv4.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the scope of a recent intel_pstate driver optimization used
incorrectly on some systems due to processor identification ambiguity
and fix a few issues in the turbostat utility, including three recent
regressions.
Specifics:
- Use ACPI FADT preferred PM Profile to distinguish Skylake desktop
processors from some server ones with the same model number in
order to limit the scope of the recent IO-wait boost optimization
to servers, as intended (Srinivas Pandruvada).
- Fix several issues in the turbostat utility:
* Fix the -S option on 1-CPU systems (Len Brown).
* Fix computations using incorrect processor core counts (Artem
Bityutskiy).
* Fix the x2apic debug message (Len Brown).
* Fix logical node enumeration to allow for non-sequential
physical nodes (Prarit Bhargava).
* Fix reported family on modern AMD processors (Calvin Walton).
* Clarify the RAPL column information in the man page (Len Brown)"
* tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
Merge turbostat utility fixes for final 4.18:
- Fix the -S option on 1-CPU systems.
- Fix computations using incorrect processor core counts.
- Fix the x2apic debug message.
- Fix logical node enumeration to allow for non-sequential physical nodes.
- Fix reported family on modern AMD processors.
- Clarify the RAPL column information in the man page.
* pm-tools:
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
Pull virtio fixes from Michael Tsirkin:
"Some bugfixes that seem important and safe enough to merge at the last
minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix another race between migration and ballooning
tools/virtio: add kmalloc_array stub
tools/virtio: add dma barrier stubs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
"Several smallish fixes, I don't think any of this requires another -rc
but I'll leave that up to you:
1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
Dumazet.
2) Route leak in xfrm_lookup_route(), from Tommi Rantala.
3) Premature poll() returns in AF_XDP, from Björn Töpel.
4) devlink leak in netdevsim, from Jakub Kicinski.
5) Don't BUG_ON in fib_compute_spec_dst, the condition can
legitimately happen. From Lorenzo Bianconi.
6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
Cline.
7) Don't allow user to bind to out of range multicast groups, from
Dmitry Safonov with a follow-up by Dmitry Safonov.
8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
netlink: Don't shift with UB on nlk->ngroups
net/ipv6: fix metrics leak
xen-netfront: wait xenbus state change when load module manually
can: ems_usb: Fix memory leak on ems_usb_disconnect()
openvswitch: meter: Fix setting meter id for new entries
netlink: Do not subscribe to non-existent groups
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
net: socket: Fix potential spectre v1 gadget in sock_is_registered
net: socket: fix potential spectre v1 gadget in socketcall
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
ipv4: remove BUG_ON() from fib_compute_spec_dst
enic: handle mtu change for vf properly
net: lan78xx: fix rx handling before first packet is send
nfp: flower: fix port metadata conversion bug
bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
bpf: fix bpf_skb_load_bytes_relative pkt length check
perf build: Build error in libbpf missing initialization
net: ena: Fix use of uninitialized DMA address bits field
bpf: btf: Use exact btf value_size match in map_check_btf()
...
|
|
I hit the following problem when I tried to use bpftool
to dump a percpu array.
$ sudo ./bpftool map show
61: percpu_array name stub flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
...
$ sudo ./bpftool map dump id 61
bpftool: malloc.c:2406: sysmalloc: Assertion
`(old_top == initial_top (av) && old_size == 0) || \
((unsigned long) (old_size) >= MINSIZE && \
prev_inuse (old_top) && \
((unsigned long) old_end & (pagesize - 1)) == 0)'
failed.
Aborted
Further debugging revealed that this is due to
miscommunication between bpftool and kernel.
For example, for the above percpu_array with value size of 4B.
The map info returned to user space has value size of 4B.
In bpftool, the values array for lookup is allocated like:
info->value_size * get_possible_cpus() = 4 * get_possible_cpus()
In kernel (kernel/bpf/syscall.c), the values array size is
rounded up to multiple of 8.
round_up(map->value_size, 8) * num_possible_cpus()
= 8 * num_possible_cpus()
So when kernel copies the values to user buffer, the kernel will
overwrite beyond user buffer boundary.
This patch fixed the issue by allocating and stepping through
percpu map value array properly in bpftool.
Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To cope with the changes in:
12c89130a56a ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling")
60622d68227d ("x86/asm/memcpy_mcsafe: Return bytes remaining")
bd131544aa7e ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling")
da7bc9c57eb0 ("x86/asm/memcpy_mcsafe: Remove loop unrolling")
This needed introducing a file with a copy of the mcsafe_handle_tail()
function, that is used in the new memcpy_64.S file, as well as a dummy
mcsafe_test.h header.
Testing it:
$ nm ~/bin/perf | grep mcsafe
0000000000484130 T mcsafe_handle_tail
0000000000484300 T __memcpy_mcsafe
$
$ perf bench mem memcpy
# Running 'mem/memcpy' benchmark:
# function 'default' (Default memcpy() provided by glibc)
# Copying 1MB bytes ...
44.389205 GB/sec
# function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
22.710756 GB/sec
# function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
# function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
$
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
That do not entail changes in tools/perf/ use of it, elliminating the
following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new 'io_pgetevents' syscall was wired up in PowerPC in the following
cset:
b2f82565f2ca ("powerpc: Wire up io_pgetevents")
Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf
trace' on PowerPC gets it in its syscall table.
This elliminated the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
6cbc304f2f36 ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")
That do not imply any changes in the tooling side, the (ab)use of
sample_type is entirely done in kernel space, nothing for userspace to
witness here.
This cures the following warning during perf's build:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-o64mjoy35s9gd1gitunw1zg4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat utility fixes for 4.18 from Len Brown:
"Three of them are for regressions since Linux-4.17"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-07-28
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) API fixes for libbpf's BTF mapping of map key/value types in order
to make them compatible with iproute2's BPF_ANNOTATE_KV_PAIR()
markings, from Martin.
2) Fix AF_XDP to not report POLLIN prematurely by using the non-cached
consumer pointer of the RX queue, from Björn.
3) Fix __xdp_return() to check for NULL pointer after the rhashtable
lookup that retrieves the allocator object, from Taehee.
4) Fix x86-32 JIT to adjust ebp register in prologue and epilogue
by 4 bytes which got removed from overall stack usage, from Wang.
5) Fix bpf_skb_load_bytes_relative() length check to use actual
packet length, from Daniel.
6) Fix uninitialized return code in libbpf bpf_perf_event_read_simple()
handler, from Thomas.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In linux-next tree compiling the perf tool with additional make flags
EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2" causes a compiler error.
It is the warning 'variable may be used uninitialized' which is treated
as error: I compile it using a FEDORA 28 installation, my gcc compiler
version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20). The file that
causes the error is tools/lib/bpf/libbpf.c.
[root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2"
[...]
Makefile.config:849: No openjdk development package found, please
install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h'
differs from latest version at 'include/uapi/linux/if_link.h'
CC libbpf.o
libbpf.c: In function ‘bpf_perf_event_read_simple’:
libbpf.c:2342:6: error: ‘ret’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int ret;
^
cc1: all warnings being treated as errors
mv: cannot stat './.libbpf.o.tmp': No such file or directory
/home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|