| Age | Commit message (Collapse) | Author |
|---|
|
This is the 5.4.196 stable release
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
# gpg: Signature made Wed 25 May 2022 03:14:43 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
# Conflicts:
# fs/file_table.c
|
|
This is the 5.4.193 stable release
# gpg: Signature made Thu 12 May 2022 06:24:08 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit e71b7f1f44d3d88c677769c85ef0171caf9fc89f ]
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
operational
commit 3122257c02afd9f199a8fc84ae981e1fc4958532 upstream.
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.4.191 stable release
# gpg: Signature made Wed 27 Apr 2022 07:50:55 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit 044011fdf162c5dd61c02841930c8f438a9adadb ]
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.190 stable release
# gpg: Signature made Wed 20 Apr 2022 03:19:44 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.4.189 stable release
# gpg: Signature made Fri 15 Apr 2022 08:18:47 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit ce64763c63854b4079f2e036638aa881a1fb3fbc ]
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.
Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.
Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bf35a7879f1dfb0d050fe779168bcf25c7de66f5 upstream.
When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[OP: backport to v5.4: adjust context, add wait.h and fcntl.h includes]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 613e040e4dc285367bff0f8f75ea59839bc10947 upstream.
When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[OP: backport to v5.4: adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b09c2baa56347ae65795350dfcc633dedb1c2970 upstream.
0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ]
The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.
The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.
Fix it by reopening the VXLAN device instead of its physical device.
Before:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
After:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ]
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ]
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ]
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.187 stable release
# gpg: Signature made Wed 23 Mar 2022 04:12:23 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This reverts commit dcf55b071de9231e197ba7b1a2d0a423e8d7d33a which is
commit a7e75016a0753c24d6c995bc02501ae35368e333 upstream.
It is reported to break the bpf self-tests.
Reported-by: Geliang Tang <geliang.tang@suse.com>
Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/a0a7298ca5c64b3d0ecfcc8821c2de79186fa9f7.camel@nokia.com
Link: https://lore.kernel.org/r/HE1PR0402MB3497CB13A12C4D15D20A1FCCF8139@HE1PR0402MB3497.eurprd04.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.4.186 stable release
# gpg: Signature made Sat 19 Mar 2022 08:40:23 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.4.185 stable release
# gpg: Signature made Wed 16 Mar 2022 08:33:40 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test':
userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
in this function); did you mean `MADV_RANDOM'?
if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
^~~~~~~~~~~~
MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f39c58008dee7ab5fc94c3f1995a21e886801df0 ]
On the latest RHEL the test fails due to executable mapped at 256MB
address
# ./map_fixed_noreplace
mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists
10000000-10010000 r-xp 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10010000-10020000 r--p 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10020000-10030000 rw-p 00010000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10029b90000-10029bc0000 rw-p 00000000 00:00 0 [heap]
7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0 [vvar]
7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0 [vdso]
7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514 /usr/lib64/ld64.so.2
7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514 /usr/lib64/ld64.so.2
7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514 /usr/lib64/ld64.so.2
7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0 [stack]
Error: couldn't map the space we need for the test
Fix this by finding a free address using mmap instead of hardcoding
BASE_ADDRESS.
Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ]
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ]
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.181 stable release
# gpg: Signature made Wed 23 Feb 2022 06:00:05 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]
If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.
The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]
zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.
We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.
orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk
Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]
Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.
The code that comparing kernel version is from xfstests testsuite ext4/053.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ]
The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.
However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.
In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.
Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:
./run_kselftest.sh -c rtc
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.178 stable release
# gpg: Signature made Tue 08 Feb 2022 12:26:04 PM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.
Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:
make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.4.171 stable release
# gpg: Signature made Tue 11 Jan 2022 09:23:37 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit dd40f44eabe1e122c6852fabb298aac05b083fce upstream.
Fix the following [-Wstringop-overread] by passing in the variable
instead of the value.
test_vsyscall.c: In function ‘test_process_vm_readv’:
test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread]
500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.4.170 stable release
# gpg: Signature made Wed 05 Jan 2022 06:37:51 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ]
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5471d5226c3b39b3d2f7011c082d5715795bd65c ]
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.168 stable release
# gpg: Signature made Wed 22 Dec 2021 03:29:57 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit 71da1aec215290e249d09c44c768df859f3a3bba ]
The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.
Fix it by extending the NETIFS with p9 and p10.
Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28a2686c185e84b6aa6a4d9c9a972360eb7ca266 ]
IPv6 allows binding a socket to a device then binding to an address
not on the device (__inet6_bind -> ipv6_chk_addr with strict flag
not set). Update the bind tests to reflect legacy behavior.
Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f108ae4452025fef529671998f6c7f1c4526790 ]
Commit referenced below added negative socket bind tests for VRF. The
socket binds should fail since the address to bind to is in a VRF yet
the socket is not bound to the VRF or a device within it. Update the
expected return code to check for 1 (bind failure) so the test passes
when the bind fails as expected. Add a 'show_hint' comment to explain
why the bind is expected to fail.
Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92816e2629808726af015c7f5b14adc8e4f8b147 ]
./fcnal-test.sh -v -t ipv6_ping
TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]
TEST: ping out, VRF bind - multicast IP [FAIL]
ping6 is failing as it should.
COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
strace of ping6 shows it is failing with '1',
so change the expected rc from 2 to 1.
Fixes: c0644e71df33 ("selftests: Add ipv6 ping tests to fcnal-test")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Link: https://lore.kernel.org/r/20211209020230.37270-1-jie2x.zhou@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 908fa88e420f30dde6d80f092795a18ec72ca6d3 ]
With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:
# ./kvm_create_max_vcpus
KVM_CAP_MAX_VCPU_ID: 4096
KVM_CAP_MAX_VCPUS: 1024
Testing creating 1024 vCPUs, with IDs 0...1023.
/dev/kvm not available (errno: 24), skipping test
Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.166 stable release
# gpg: Signature made Thu 16 Dec 2021 10:41:42 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
When backporting 33b8aad21ac1 ("selftests: netfilter: add a
vrf+conntrack testcase") to this stable branch, the executable bits were
not properly set on the
tools/testing/selftests/netfilter/conntrack_vrf.sh file due to quilt not
honoring them.
Fix this up manually by setting the correct mode.
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Link: https://lore.kernel.org/r/234d7a6a81664610fdf21ac72730f8bd10d3f46f.camel@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.4.165 stable release
# gpg: Signature made Tue 14 Dec 2021 08:49:12 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 5.4.164 stable release
# gpg: Signature made Wed 08 Dec 2021 03:01:35 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit b560b21f71eb4ef9dfc7c8ec1d0e4d7f9aa54b51 upstream.
This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:
1. Length is just enough for an 8-byte read. Length is either 7 or 8,
depending on the comparison.
2. Length is increased by 1 - should still pass the verifier. These
cases are useful, because they failed before commit 2fa7d94afc1a
("bpf: Fix the off-by-two error in range markings").
3. Length is decreased by 1 - should be rejected by the verifier.
Some existing tests are just renamed to avoid duplication.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.
Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing. ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.
For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails. Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.
These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device. The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail. See [2] .
Fixing the tests while keeping everything in one netns turns out to be
nontrivial. Rework the tests and build the following topology:
┌─────────────────────────────┐ ┌─────────────────────────────┐
│ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │
│ │ │ │
│ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │
│ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │
│ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │
│ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │
│ └────────────┘ │ │ └────────────┘ │
└─────────────────────────────┘ └─────────────────────────────┘
Consider sending an ICMP_ECHO packet A in ns2. Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:
1. A is routed to lo since its destination IP address is one of ns2's
local addresses (veth2);
2. A is redirected from lo's egress to veth2's egress using mirred;
3. A arrives at veth1's ingress in ns1;
4. A is redirected from veth1's ingress to lo's ingress, again, using
mirred;
5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
since A was received on lo, but reverse path lookup says veth1;
6. However A is not dropped since we have relaxed this check for lo in
commit 66f8209547cc ("fib: relax source validation check for loopback
packets");
Making sure A is not dropped here in this corner case is the whole point
of having this test.
7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
generated;
8. Similarly, B is redirected from lo's egress to veth1's egress (in
ns1), then redirected once again from veth2's ingress to lo's
ingress (in ns2), using mirred.
Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.
Tested with ping from iputils 20210722-41-gf9fb573:
$ ./fib_tests.sh -t rp_filter
IPv4 rp_filter tests
TEST: rp_filter passes local packets [ OK ]
TEST: rp_filter passes loopback packets [ OK ]
[1] https://github.com/iputils/iputils/issues/55
[2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.
The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):
// 1. Passes the verifier:
if (data + 8 > data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
// 2. Rejected by the verifier (should still pass):
if (data + 7 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:
// 3. Rejected by the verifier, but the check is stricter than in #1.
if (data + 8 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.
This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.
Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Bruce Ashfield
Nicolas Dichtel
Ido Schimmel
Athira Rajeev
Tejun Heo
Hangbin Liu
Felix Maurer
Muhammad Usama Anjum
Greg Kroah-Hartman
Chengming Zhou
Mike Kravetz
Aneesh Kumar K.V
Kumar Kartikeya Dwivedi
Guillaume Nault
Yang Xu
Nícolas F. R. A. Prado
Shuah Khan
wujianguo
Coco Li
David Ahern
Jie2x Zhou
Vitaly Kuznetsov
Maxim Mikityanskiy
Peilin Ye