Age | Commit message (Collapse) | Author |
|
commit 0c5086f5699906ec8e31ea6509239489f060f2dc upstream.
The HP Thunderbolt Dock has two separate USB devices, one is for speaker
and one is for headset. Add names for them so userspace can apply UCM
settings.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200608062630.10806-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 862b2509d157c629dd26d7ac6c6cdbf043d332eb upstream.
When a USB-audio interface gets runtime-suspended via auto-pm feature,
the driver suspends all functionality and increment
chip->num_suspended_intf. Later on, when the system gets suspended to
S3, the driver increments chip->num_suspended_intf again, skips the
device changes, and sets the card power state to
SNDRV_CTL_POWER_D3hot. In return, when the system gets resumed from
S3, the resume callback decrements chip->num_suspended_intf. Since
this refcount is still not zero (it's been runtime-suspended), the
whole resume is skipped. But there is a small pitfall here.
The problem is that the driver doesn't restore the card power state
after this resume call, leaving it as SNDRV_CTL_POWER_D3hot. So,
even after the system resume finishes, the card instance still appears
as if it were system-suspended, and this confuses many ioctl accesses
that are blocked unexpectedly.
In details, we have two issues behind the scene: one is that the card
power state is changed only when the refcount becomes zero, and
another is that the prior auto-suspend check is kept in a boolean
flag. Although the latter problem is almost negligible since the
auto-pm feature is imposed only on the primary interface, but this can
be a potential problem on the devices with multiple interfaces.
This patch addresses those issues by the following:
- Replace chip->autosuspended boolean flag with chip->system_suspend
counter
- At the first system-suspend, chip->num_suspended_intf is recorded to
chip->system_suspend
- At system-resume, the card power state is restored when the
chip->num_suspended_intf refcount reaches to chip->system_suspend,
i.e. the state returns to the auto-suspended
Also, the patch fixes yet another hidden problem by the code
refactoring along with the fixes above: namely, when some resume
procedure failed, the driver left chip->num_suspended_intf that was
already decreased, and it might lead to the refcount unbalance.
In the new code, the refcount decrement is done after the whole resume
procedure, and the problem is avoided as well.
Fixes: 0662292aec05 ("ALSA: usb-audio: Handle normal and auto-suspend equally")
Reported-and-tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603153709.6293-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit e18035cf5cb3d2bf8e4f4d350a23608bd208b934 upstream.
Add and use snd_pcm_stream_lock_nested() in snd_pcm_link/unlink
implementation. The code is fine, but generates a lockdep complaint:
============================================
WARNING: possible recursive locking detected
5.7.1mq+ #381 Tainted: G O
--------------------------------------------
pulseaudio/4180 is trying to acquire lock:
ffff888402d6f508 (&group->lock){-...}-{2:2}, at: snd_pcm_common_ioctl+0xda8/0xee0 [snd_pcm]
but task is already holding lock:
ffff8883f7a8cf18 (&group->lock){-...}-{2:2}, at: snd_pcm_common_ioctl+0xe4e/0xee0 [snd_pcm]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&group->lock);
lock(&group->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by pulseaudio/4180:
#0: ffffffffa1a05190 (snd_pcm_link_rwsem){++++}-{3:3}, at: snd_pcm_common_ioctl+0xca0/0xee0 [snd_pcm]
#1: ffff8883f7a8cf18 (&group->lock){-...}-{2:2}, at: snd_pcm_common_ioctl+0xe4e/0xee0 [snd_pcm]
[...]
Cc: stable@vger.kernel.org
Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/37252c65941e58473b1219ca9fab03d48f47e3e3.1591610330.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 951e2736f4b11b58dc44d41964fa17c3527d882a upstream.
Prevent SNDRV_PCM_IOCTL_LINK linking stream to itself - the code
can't handle it. Fixed commit is not where bug was introduced, but
changes the context significantly.
Cc: stable@vger.kernel.org
Fixes: 0888c321de70 ("pcm_native: switch to fdget()/fdput()")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/89c4a2487609a0ed6af3ecf01cc972bdc59a7a2d.1591634956.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 573fcbfd319ccef26caa3700320242accea7fd5c upstream.
A couple of Lenovo ThinkCentre machines all have 2 front mics and they
use the same codec alc623 and have the same pin config, so add a
pintbl entry for those machines to apply the fixup
ALC283_FIXUP_HEADSET_MIC.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200608115541.9531-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d9b8fbf15d05350b36081eddafcf7b15aa1add50 upstream.
snd_es968_pnp_detect() misses a snd_card_free() in a failed path.
Add the missed function call to fix it.
Fixes: a20971b201ac ("ALSA: Merge es1688 and es968 drivers")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603092459.1424093-1-hslester96@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8ba4dc3cff8cbe2c571063a5fd7116e8bde563ca upstream.
The xmax values for Master Playback Volume and Mic Boost
Capture Volume are specified incorrectly (one greater)
which results in the wrong dB gain being shown to the user
in the case of Master Playback Volume.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200515120757.24669-1-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 607fa205a7e4dfad28b8a67ab1c985756ddbccb0 upstream.
Additional checks for valid DAIs expose a corner case, where existing
BE dailinks get modified, e.g. HDMI links are tagged with
dpcm_capture=1 even if the DAIs are for playback.
This patch makes those changes conditional and flags configuration
issues when a BE dailink is has no_pcm=0 but dpcm_playback or
dpcm_capture=1 (which makes no sense).
As discussed on the alsa-devel mailing list, there are redundant flags
for dpcm_playback, dpcm_capture, playback_only, capture_only. This
will have to be cleaned-up in a future update. For now only correct
and flag problematic configurations.
Fixes: 218fe9b7ec7f3 ("ASoC: soc-core: Set dpcm_playback / dpcm_capture")
Suggested-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 3e802e90ffcce333127d928eaefdfcc34af233e8 upstream.
McBSP used to work correctly as long as compat DMA probing, removed by
commit 642aafea8889 ("ASoC: ti: remove compat dma probing"), was
available. New method of DMA probing apparently requires users to
provide channel names when registering with SDMA, while McBSP passes
NULLs. Fix it.
The same probably applies to McASP (not tested), hence the patch fixes
both.
Fixes: 642aafea8889 ("ASoC: ti: remove compat dma probing")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 41d92e0c835bff7dec343bf41e79d24b326d94c1 upstream.
Without this, we get a link error:
sound/soc/rockchip/rockchip_pdm.o: In function `rockchip_pdm_hw_params':
rockchip_pdm.c:(.text+0x754): undefined reference to `rational_best_approximation'
Fixes: 624e8e00acaf ("ASoC: rockchip: pdm: fixup pdm fractional div")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d745cc1ab65945b2d17ec9c5652f38299c054649 upstream.
Those strings are exposed to the user space as the
card name thus used in the GUIs. The common
standard is to avoid '_' here. The worst case
is 'sof-skl_hda_card' string.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191028164624.14334-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 630e36126e420e1756378b3427b42711ce0b9ddd upstream.
Enable new codec supported for ALC287.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/dcf5ce5507104d0589a917cbb71dc3c6@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 7f5ad9c9003425175f46c94df380e8c9e558cfb5 upstream.
Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices,
a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC
(USB ID 0414:a000). The latter serves solely for the headphone output
on the front panel while the former serves for the rest I/Os (mostly
for the I/Os in the rear panel but also including the front mic).
Both chips do work more or less with the unmodified USB-audio driver,
but there are a few glitches. The ALC1220-VB returns an error for an
inquiry to some jacks, as already seen on other TRX40-based mobos.
However this machine has a slightly incompatible configuration, hence
the existing mapping cannot be used as is.
Meanwhile the ESS chip seems working without any quirk. But since
both audio devices don't provide any specific names, both cards appear
as "USB-Audio", and it's quite confusing for users.
This patch is an attempt to overcome those issues:
- The specific mapping table for ALC1220-VB is provided, reducing the
non-working nodes and renaming the badly chosen controls.
The connector map isn't needed here unlike other TRX40 quirks.
- For both USB IDs (0414:a000 and 0414:a001), provide specific card
name strings, so that user-space can identify more easily; and more
importantly, UCM profile can be applied to each.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526082810.29506-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 4020d1ccbe55bdf67b31d718d2400506eaf4b43f upstream.
The Asus USB DAC is a USB type-C audio dongle for connecting to
the headset and headphone. The volume minimum value -23040 which
is 0xa600 in hexadecimal with the resolution value 1 indicates
this should be endianness issue caused by the firmware bug. Add
a volume quirk to fix the volume control problem.
Also fixes this warning:
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526062613.55401-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 399c01aa49e548c82d40f8161915a5941dd3c60e upstream.
We fixed the regression of the speaker volume for some Thinkpad models
(e.g. T570) by the commit 54947cd64c1b ("ALSA: hda/realtek - Fix
speaker output regression on Thinkpad T570"). Essentially it fixes
the DAC / pin pairing by a static table. It was confirmed and merged
to stable kernel later.
Now, interestingly, we got another regression report for the very same
model (T570) about the similar problem, and the commit above was the
culprit. That is, by some reason, there are devices that prefer the
DAC1, and another device DAC2!
Unfortunately those have the same ID and we have no idea what can
differentiate, in this patch, a new fixup model "tpt470-dock-fix" is
provided, so that users with such a machine can apply it manually.
When model=tpt470-dock-fix option is passed to snd-hda-intel module,
it avoids the fixed DAC pairing and the DAC1 is assigned to the
speaker like the earlier versions.
Fixes: 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570")
BugLink: https://apibugzilla.suse.com/show_bug.cgi?id=1172017
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526062406.9799-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit fb8cd6481ffd126f35e9e146a0dcf0c4e8899f2e upstream.
The "info.index" variable can be 31 in "1 << info.index".
This might trigger an undefined behavior since 1 is signed.
Fix this by casting 1 to 1u just to be sure "1u << 31" is defined.
Signed-off-by: Changming Liu <liu.changm@northeastern.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR06MB4548170B842CB055C9AF695DE5B00@BL0PR06MB4548.namprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit da7a8f1a8fc3e14c6dcc52b4098bddb8f20390be upstream.
This is another TRX40 based motherboard with ALC1220-VB USB-audio
that requires a static mapping table.
This motherboard also has a PCI device which advertises no codecs. The
PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD
vendor ID, don't blacklist for now in case other boards have a working
audio device with the same ssid.
alsa-info.sh report for this board:
http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c
Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 259eb82475316672a5d682a94dc8bdd53cf8d8c3 upstream.
A few known Clevo machines (PC50, PC70, X170) with ALC1220 codec need
the existing quirk for pins for PB51 and co.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200519065012.13119-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d9e8fe0cffbfdd18de96fa68ee2a8b667a0b046e upstream.
The Gigabyte X570 Aorus Xtreme motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200518053844.42743-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit e7513c5786f8b33f0c107b3759e433bc6cbb2efa upstream.
There is a corner case that ALSA keeps increasing the hw_ptr but DMA
already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does
not move at all but the hw_ptr got increased at some point of time so
snd_pcm_avail() will return a large number which seems to be a buffer
underrun event from user space program point of view. The program
thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554
...
[ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362
[ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
[ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size
frames unconditionally if the hw_ptr is not updated for over half of
buffer time. As the hw_base increases, so does the hw_ptr increased
by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit
(buffer_size) easily becase the hw_ptr itself got increased by same
buffer_size samples when the corner case happens. In following log,
the buffer_size is 16368 samples but the avail is 21810 samples so
CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442
[ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called,
the hw_base will keep the same when buffer stall happens at long as
the interval between each HWSYNC call is shorter than half of buffer
time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr
value is fixed in this corner case and user space program should be
aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584
[ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488
[ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392
[ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
...
[ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1589776238-23877-1-git-send-email-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b0cb099062b0c18246c3a20caaab4c0afc303255 upstream.
The ST Audio ADCIII is an STDSP24 card plus extension box. With commit
e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") we
enabled the ADCIII ports using the model=staudio option but forgot
this part to ensure the STDSP24 card is initialized properly.
Fixes: e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII")
Signed-off-by: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934
Link: https://lore.kernel.org/r/20200518175728.28766-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 7900e81797613b92f855f9921392a7430cbdf88c upstream.
The ASUS UX581LV laptop's audio (1043:19e1) with ALC295 can't detect the
headset microphone until ALC295_FIXUP_ASUS_MIC_NO_PRESENCE quirk
applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ad97d667854c2fbce05a004e107f358ef4b04cf6 upstream.
The ASUS laptop UX550GE with ALC295 can't detect the headset microphone
until ALC295_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-2-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 9e43342b464f1de570a3ad8256ac77645749ef45 upstream.
The ASUS laptop GL503VM with ALC295 can't detect the headset microphone.
The headset microphone does not work until pin 0x19 is enabled for it.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 14425f1f521fdfe274a7bb390637c786432e08b4 upstream.
Some models of the Samsung Notebook 9 have very quiet and distorted
headphone output. This quirk changes the VREF value of the ALC298
codec NID 0x1a from default HIZ to new 100.
[ adjusted to 5.7-base and rearranged in SSID order -- tiwai ]
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Link: https://lore.kernel.org/r/20200510032838.1989130-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 24164f434dc9c23cd34fca1e36acea9d0581bdde upstream.
HP new platform has new mute led feature.
COEF index 0x34 bit 5 to control playback mute led.
COEF index 0x35 bit 2 and bit 3 to control Mic mute led.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 431e76c3edd76d84a0ed1eb81a286b2ddecc5ee4 upstream.
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 1a462be52f4505a2719631fb5aa7bfdbd37bfd8d upstream.
In the commit 8e85def5723e ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8a71821f12a010d7100f9cc1f7b218aff0313c4a upstream.
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit caf3c0437aaf2e63624c4aaf94c0dd38d1f897e3 upstream.
Make hda_nid_t tables static const, as they are not intended to be
modified by callees.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/5150c94101c9534f4c8e987324f6912c16d459f6.1578043216.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 073919e09ca445d4486968e3f851372ff44cf2b5 upstream.
Kingston HyperX headset with 0951:16ad also needs the same quirk for
delaying the frequency controls.
Signed-off-by: Jesus Ramos <jesus-ramos@live.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream.
The rawmidi core allows user to resize the runtime buffer via ioctl,
and this may lead to UAF when performed during concurrent reads or
writes: the read/write functions unlock the runtime lock temporarily
during copying form/to user-space, and that's the race window.
This patch fixes the hole by introducing a reference counter for the
runtime buffer read/write access and returns -EBUSY error when the
resize is performed concurrently against read/write.
Note that the ref count field is a simple integer instead of
refcount_t here, since the all contexts accessing the buffer is
basically protected with a spinlock, hence we need no expensive atomic
ops. Also, note that this busy check is needed only against read /
write functions, and not in receive/transmit callbacks; the race can
happen only at the spinlock hole mentioned in the above, while the
whole function is protected for receive / transmit callbacks.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com
Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 1b94e59d30afecf18254ad413e953e7587645a20 upstream.
ASUS ZenBook UX431DA requires an additional COEF setup when booted
from the recent Windows 10, otherwise it produces the noisy output.
The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly
due to the pop noise reduction.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream.
Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 52e4e36807aeac1cdd07b14e509c8a64101e1a09 upstream.
Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.
The previous fix enable power save node universally for ALC225, however
it makes some ALC225 systems unable to produce any sound.
So let's only enable power save node for the affected Dell Wyse
platform.
Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ca76282b6faffc83601c25bd2a95f635c03503ef upstream.
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 977dfef40c8996b69afe23a9094d184049efb7bb upstream.
The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
Since the empty codec problem appear on the certain AMD platform (PCI
ID 1022:1487), this patch changes the blacklist matching to both PCI
ID and SSID using pci_match_id(). Also, the entry that was removed by
the previous fix for ASUS ROG Zenigh II is re-added.
Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 54cb6221688660670a2e430892d7f4e6370263b8 upstream.
Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd upstream.
The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.
Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 326b509238171d37402dbe308e154cc234ed1960 upstream.
If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b94e164759b82d0c1c80d4b1c8f12c9bee83f11d upstream.
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit a09fb3f28a60ba3e928a1fa94b0456780800299d upstream.
The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 26d87881590fd55ccdd8f829498d7b3033f81990 upstream.
As done in already existing cases, we should use le32_to_cpu macro while
accessing hdr->magic. Found with sparse.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162435.31859-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit aa7812737f2877e192d57626cbe8825cc7cf6de9 upstream.
As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.
If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Fabio Estevam <festivem@gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit dd8e871d4e560eeb8d22af82dde91457ad835a63 upstream.
Function soc_tplg_dai_config can fail, check for and handle possible
failure.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b3677fc3d68dd942c92de52f0bd9dd8b472a40e6 upstream.
Function pcm_new_ver can fail, so we should check it's return value and
handle possible error.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 6856e887eae3efc0fe56899cb3f969fe063171c5 upstream.
Function soc_tplg_add_route can propagate error code from callback, we
should check its return value and handle fail in correct way.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 2ae548f30d7f6973388fc3769bb3c2f6fd13652b upstream.
Functions soc_tplg_denum_create, soc_tplg_dmixer_create,
soc_tplg_dbytes_create can fail, so their return values should be
checked and error should be propagated.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 482db55ae87f3749db05810a38b1d618dfd4407c upstream.
Function soc_tplg_create_tlv can fail, so we should check if it succeded
or not and proceed appropriately.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 5ce00760a84848d008554c693ceb6286f4d9c509 upstream.
gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:
sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~
These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.
Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.
Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|