aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc
AgeCommit message (Collapse)Author
2024-04-13ASoC: ops: Fix wraparound for mask in snd_soc_get_volswStephen Lee
[ Upstream commit fc563aa900659a850e2ada4af26b9d7a3de6c591 ] In snd_soc_info_volsw(), mask is generated by figuring out the index of the most significant bit set in max and converting the index to a bitmask through bit shift 1. Unintended wraparound occurs when max is an integer value with msb bit set. Since the bit shift value 1 is treated as an integer type, the left shift operation will wraparound and set mask to 0 instead of all 1's. In order to fix this, we type cast 1 as `1ULL` to prevent the wraparound. Fixes: 7077148fb50a ("ASoC: core: Split ops out of soc-core.c") Signed-off-by: Stephen Lee <slee08177@gmail.com> Link: https://msgid.link/r/20240326010131.6211-1-slee08177@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fsJerome Brunet
[ Upstream commit e3741a8d28a1137f8b19ae6f3d6e3be69a454a0a ] By default, when mclk-fs is not provided, the tdm-interface driver requests an MCLK that is 4x the bit clock, SCLK. However there is no justification for this: * If the codec needs MCLK for its operation, mclk-fs is expected to be set according to the codec requirements. * If the codec does not need MCLK the minimum is 2 * SCLK, because this is minimum the divider between SCLK and MCLK can do. Multiplying by 4 may cause problems because the PLL limit may be reached sooner than it should, so use 2x instead. Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26ASoC: wm8962: Fix up incorrect error message in wm8962_set_fllStuart Henderson
[ Upstream commit 96e202f8c52ac49452f83317cf3b34cd1ad81e18 ] Use source instead of ret, which seems to be unrelated and will always be zero. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono modeStuart Henderson
[ Upstream commit 6fa849e4d78b880e878138bf238e4fd2bac3c4fa ] Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSCStuart Henderson
[ Upstream commit 03c7874106ca5032a312626b927b1c35f07b1f35 ] Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tabletAlban Boyé
[ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ] The bios version can differ depending if it is a dual-boot variant of the tablet. Therefore another DMI match is required. Signed-off-by: Alban Boyé <alban.boye@protonmail.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26ASoC: rt5645: Make LattePanda board DMI match more preciseHans de Goede
[ Upstream commit 551539a8606e28cb2a130f8ef3e9834235b456c4 ] The DMI strings used for the LattePanda board DMI quirks are very generic. Using the dmidecode database from https://linux-hardware.org/ shows that the chosen DMI strings also match the following 2 laptops which also have a rt5645 codec: Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04 Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934 All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS version DMI strings: DF-BI-7-S70CR100-* DF-BI-7-S70CR110-* DF-BI-7-S70CR200-* LP-BS-7-S70CR700-* See e.g. https://linux-hardware.org/?computer=D98250A817C0 Add a partial (non exact) DMI match on this string to make the LattePanda board DMI match more precise to avoid false-positive matches. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616Chen-Yu Tsai
[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ] The SPDIF hardware block found in the H616 SoC has the same layout as the one found in the H6 SoC, except that it is missing the receiver side. Since the driver currently only supports the transmit function, support for the H616 is identical to what is currently done for the H6. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()Alexey Khoroshilov
[ Upstream commit 6ef5d5b92f7117b324efaac72b3db27ae8bb3082 ] There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cdba4301adda ("ASoC: rt5650: add mutex to avoid the jack detection failure") Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25Revert "ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek"Greg Kroah-Hartman
This reverts commit 6a20bf46c6254e4e99613309c334519a5f54be53 which is commit c775cbf62ed4911e4f0f23880f01815753123690 upstream. It is reported to cause problems, so drop it from the 5.4.y tree for now. Link: https://lore.kernel.org/r/845b3053-d47b-4717-9665-79b120da133b@sirena.org.uk Reported-by: Mark Brown <broonie@kernel.org> Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-25ASoC: cs35l34: Fix GPIO name and drop legacy includeLinus Walleij
[ Upstream commit a6122b0b4211d132934ef99e7b737910e6d54d2f ] This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: c1124c09e103 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.") Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-3-ee9f9d4655eb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: cs35l33: Fix GPIO name and drop legacy includeLinus Walleij
[ Upstream commit 50678d339d670a92658e5538ebee30447c88ccb3 ] This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: da7219: Support low DC impedance headsetDavid Rau
[ Upstream commit 5f44de697383fcc9a9a1a78f99e09d1838704b90 ] Change the default MIC detection impedance threshold to 200ohm to support low mic DC impedance headset. Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: rt5650: add mutex to avoid the jack detection failureShuming Fan
[ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: cs43130: Fix incorrect frame delay configurationMaciej Strozek
[ Upstream commit aa7e8e5e4011571022dc06e4d7a2f108feb53d1a ] Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: cs43130: Fix the position of const qualifierMaciej Strozek
[ Upstream commit e7f289a59e76a5890a57bc27b198f69f175f75d9 ] Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: Intel: Skylake: mem leak in skl register functionKamil Duljas
[ Upstream commit f8ba14b780273fd290ddf7ee0d7d7decb44cc365 ] skl_platform_register() uses krealloc. When krealloc is fail, then previous memory is not freed. The leak is also when soc component registration failed. Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: nau8822: Fix incorrect type in assignment and cast to restricted __be16David Lin
[ Upstream commit c1501f2597dd08601acd42256a4b0a0fc36bf302 ] This issue is reproduced when W=1 build in compiler gcc-12. The following are sparse warnings: sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/ Signed-off-by: David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25ASoC: Intel: Skylake: Fix mem leak in few functionsKamil Duljas
[ Upstream commit d5c65be34df73fa01ed05611aafb73b440d89e29 ] The resources should be freed when function return error. Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15ASoC: meson: codec-glue: fix pcm format cast warningJerome Brunet
commit 3cd23f021e2e5f3350125abcb39f12430df87d06 upstream. Clarify the cast of snd_pcm_format_t and fix the sparse warning: restricted snd_pcm_format_t degrades to integer Fixes: 9c29fd9bdf92 ("ASoC: meson: g12a: extract codec-to-codec utils") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200214131350.337968-6-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-15ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF muxMark Brown
[ Upstream commit b036d8ef3120b996751495ce25994eea58032a98 ] When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. While the I2S mux gets this right the S/PDIF mux does not, fix the return value. Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15ASoC: meson: g12a-tohdmitx: Validate written enum valuesMark Brown
[ Upstream commit 1e001206804be3f3d21f4a1cf16e5d059d75643f ] When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value). Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15ASoC: meson: g12a: extract codec-to-codec utilsJerome Brunet
[ Upstream commit 9c29fd9bdf92900dc0cc5c2d8f58951a7bdc0f41 ] The hdmi routing mechanism used on g12a hdmi is also used: * other Amlogic SoC types * for the internal DAC path Each of these codec glues are slightly different but the idea behind it remains the same. This change extract some helper functions from the g12a-tohdmitx driver to make them available for other Amlogic codecs. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200213155159.3235792-3-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 1e001206804b ("ASoC: meson: g12a-tohdmitx: Validate written enum values") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populateDinghao Liu
[ Upstream commit 29046a78a3c0a1f8fa0427f164caa222f003cf5b ] When wm_adsp_buffer_read() fails, we should free buf->regions. Otherwise, the callers of wm_adsp_buffer_populate() will directly free buf on failure, which makes buf->regions a leaked memory. Fixes: a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28ASoC: ti: omap-mcbsp: Fix runtime PM underflow warningsTony Lindgren
[ Upstream commit fbb74e56378d8306f214658e3d525a8b3f000c5a ] We need to check for an active device as otherwise we get warnings for some mcbsp instances for "Runtime PM usage count underflow!". Reported-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20ASoC: ams-delta.c: use component after checkKuninori Morimoto
[ Upstream commit bd0f7498bc9084d8cccc5484cd004b40f314b763 ] static void cx81801_close() { ... (A) struct snd_soc_dapm_context *dapm = &component->card->dapm; ... (B) if (!component) return; } (A) uses component before NULL check (B). This patch moves it after (B). Fixes: d0fdfe34080c ("ASoC: cx20442: replace codec to component") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/3e608474-e99a-4866-ae98-3054a4221f09@moroto.mountain Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87ttqdq623.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20ASoC: Intel: Skylake: Fix mem leak when parsing UUIDs failsCezary Rojewski
[ Upstream commit 168d97844a61db302dec76d44406e9d4d7106b8e ] Error path in snd_skl_parse_uuids() shall free last allocated module if its instance_id allocation fails. Fixes: f8e066521192 ("ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231026082558.1864910-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08ASoC: rt5650: fix the wrong result of key buttonShuming Fan
[ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25ASoC: pxa: fix a memory leak in probe()Dan Carpenter
[ Upstream commit aa6464edbd51af4a2f8db43df866a7642b244b5f ] Free the "priv" pointer before returning the error code. Fixes: 90eb6b59d311 ("ASoC: pxa-ssp: add support for an external clock in devicetree") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/84ac2313-1420-471a-b2cb-3269a2e12a7c@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10ASoC: imx-audmix: Fix return error with devm_clk_get()Shengjiu Wang
[ Upstream commit b19a5733de255cabba5feecabf6e900638b582d1 ] The devm_clk_get() can return -EPROBE_DEFER error, modify the error code to be -EINVAL is not correct, which cause the -EPROBE_DEFER error is not correctly handled. This patch is to fix the return error code. Fixes: b86ef5367761 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/1694757731-18308-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10ASoC: meson: spdifin: start hw on dai probeJerome Brunet
[ Upstream commit aedf323b66b2b875137422ecb7d2525179759076 ] For spdif input to report the locked rate correctly, even when no capture is running, the HW and reference clock must be started as soon as the dai is probed. Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230907090504.12700-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ASoC: atmel: Fix the 8K sample parameter in I2SC masterGuiting Shen
[ Upstream commit f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 ] The 8K sample parameter of 12.288Mhz main system bus clock doesn't work because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2 series datasheet(I2SC Mode Register of Register Summary). So use the 6.144Mhz instead of 12.288Mhz to support 8K sample. Signed-off-by: Guiting Shen <aarongt.shen@gmail.com> Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ASoc: codecs: ES8316: Fix DMIC configEdgar
[ Upstream commit d20d35d1ad62c6cca36368c1e8f29335a068659e ] According to the datasheet, the DMIC config should be changed to { 0, 2 ,3 } Signed-off-by: Edgar <ljijcj@163.com> Link: https://lore.kernel.org/r/20230719054722.401954-1-ljijcj@163.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ASoC: da7219: Check for failure reading AAD IRQ eventsDmytro Maluka
[ Upstream commit f0691dc16206f21b13c464434366e2cd632b8ed7 ] When handling an AAD interrupt, if IRQ events read failed (for example, due to i2c "Transfer while suspended" failure, i.e. when attempting to read it while DA7219 is suspended, which may happen due to a spurious AAD interrupt), the events array contains garbage uninitialized values. So instead of trying to interprete those values and doing any actions based on them (potentially resulting in misbehavior, e.g. reporting bogus events), refuse to handle the interrupt. Signed-off-by: Dmytro Maluka <dmy@semihalf.com> Link: https://lore.kernel.org/r/20230717193737.161784-3-dmy@semihalf.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ASoC: da7219: Flush pending AAD IRQ when suspendingDmytro Maluka
[ Upstream commit 91e292917dad64ab8d1d5ca2ab3069ad9dac6f72 ] da7219_aad_suspend() disables jack detection, which should prevent generating new interrupts by DA7219 while suspended. However, there is a theoretical possibility that there is a pending interrupt generated just before suspending DA7219 and not handled yet, so the IRQ handler may still run after DA7219 is suspended. To prevent that, wait until the pending IRQ handling is done. This patch arose as an attempt to fix the following I2C failure occurring sometimes during system suspend or resume: [ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended [ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440 ... [ 355.876462] Call Trace: [ 355.876468] <TASK> [ 355.876475] ? update_load_avg+0x1b3/0x615 [ 355.876484] __i2c_transfer+0x101/0x1d8 [ 355.876494] i2c_transfer+0x74/0x10d [ 355.876504] regmap_i2c_read+0x6a/0x9c [ 355.876513] _regmap_raw_read+0x179/0x223 [ 355.876521] regmap_raw_read+0x1e1/0x28e [ 355.876527] regmap_bulk_read+0x17d/0x1ba [ 355.876532] ? __wake_up+0xed/0x1bb [ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184] [ 355.876556] irq_thread+0x13c/0x231 [ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f [ 355.876570] ? irq_thread_fn+0x4d/0x4d [ 355.876576] kthread+0x13a/0x152 [ 355.876581] ? synchronize_irq+0xc3/0xc3 [ 355.876587] ? kthread_blkcg+0x31/0x31 [ 355.876592] ret_from_fork+0x1f/0x30 [ 355.876601] </TASK> which indicates that the AAD IRQ handler is unexpectedly running when DA7219 is suspended, and as a result, is trying to read data from DA7219 over I2C and is hitting the I2C driver "Transfer while suspended" failure. However, with this patch the above failure is still reproducible. So this patch does not fix any real observed issue so far, but at least is useful for confirming that the above issue is not caused by a pending IRQ but rather looks like a DA7219 hardware issue with an IRQ unexpectedly generated after jack detection is already disabled. Signed-off-by: Dmytro Maluka <dmy@semihalf.com> Link: https://lore.kernel.org/r/20230717193737.161784-2-dmy@semihalf.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ASoC: fsl_sai: Disable bit clock with transmitterMatus Gajdos
[ Upstream commit 269f399dc19f0e5c51711c3ba3bd06e0ef6ef403 ] Otherwise bit clock remains running writing invalid data to the DAC. Signed-off-by: Matus Gajdos <matuszpd@gmail.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230712124934.32232-1-matuszpd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ASoC: fsl_sai: Add new added registers and new bit definitionShengjiu Wang
[ Upstream commit 0b2cbce6898600aae5e87285f1c2000162d59c76 ] On i.MX8MQ/i.MX8MN/i.MX8MM platform, the sai IP is upgraded. There are some new registers and new bit definition. This patch is to complete the register list. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1600323079-5317-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 269f399dc19f ("ASoC: fsl_sai: Disable bit clock with transmitter") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ASoC: fsl_sai: Refine enable/disable TE/RE sequence in trigger()Shengjiu Wang
[ Upstream commit 94741eba63c23b0f1527b0ae0125e6b553bde10e ] Current code enables TCSR.TE and RCSR.RE together, and disable TCSR.TE and RCSR.RE together in trigger(), which only supports one operation mode： 1. Rx synchronous with Tx: TE is last enabled and first disabled Other operation mode need to be considered also: 2. Tx synchronous with Rx: RE is last enabled and first disabled. 3. Asynchronous mode: Tx and Rx are independent. So the enable TCSR.TE and RCSR.RE sequence and the disable sequence need to be refined accordingly for #2 and #3. There is slightly against what RM recommennds with this change. For example in Rx synchronous with Tx mode, case "aplay 1.wav; arecord 2.wav" enable TE before RE. But it should be safe to do so, judging by years of testing results. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20200805063413.4610-2-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: 269f399dc19f ("ASoC: fsl_sai: Disable bit clock with transmitter") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ASoC: meson: axg-tdm-formatter: fix channel slot allocationJerome Brunet
[ Upstream commit c1f848f12103920ca165758aedb1c10904e193e1 ] When the tdm lane mask is computed, the driver currently fills the 1st lane before moving on to the next. If the stream has less channels than the lanes can accommodate, slots will be disabled on the last lanes. Unfortunately, the HW distribute channels in a different way. It distribute channels in pair on each lanes before moving on the next slots. This difference leads to problems if a device has an interface with more than 1 lane and with more than 2 slots per lane. For example: a playback interface with 2 lanes and 4 slots each (total 8 slots - zero based numbering) - Playing a 8ch stream: - All slots activated by the driver - channel #2 will be played on lane #1 - slot #0 following HW placement - Playing a 4ch stream: - Lane #1 disabled by the driver - channel #2 will be played on lane #0 - slot #2 This behaviour is obviously not desirable. Change the way slots are activated on the TDM lanes to follow what the HW does and make sure each channel always get mapped to the same slot/lane. Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ASoC: rt5665: add missed regulator_bulk_disableZhang Shurong
[ Upstream commit c163108e706909570f8aa9aa5bcf6806e2b4c98c ] The driver forgets to call regulator_bulk_disable() Add the missed call to fix it. Fixes: 33ada14a26c8 ("ASoC: add rt5665 codec driver") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Link: https://lore.kernel.org/r/tencent_A560D01E3E0A00A85A12F137E4B5205B3508@qq.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11ASoC: cs42l51: fix driver to properly autoload with automatic module loadingThomas Petazzoni
commit e51df4f81b02bcdd828a04de7c1eb6a92988b61e upstream. In commit 2cb1e0259f50 ("ASoC: cs42l51: re-hook of_match_table pointer"), 9 years ago, some random guy fixed the cs42l51 after it was split into a core part and an I2C part to properly match based on a Device Tree compatible string. However, the fix in this commit is wrong: the MODULE_DEVICE_TABLE(of, ....) is in the core part of the driver, not the I2C part. Therefore, automatic module loading based on module.alias, based on matching with the DT compatible string, loads the core part of the driver, but not the I2C part. And threfore, the i2c_driver is not registered, and the codec is not known to the system, nor matched with a DT node with the corresponding compatible string. In order to fix that, we move the MODULE_DEVICE_TABLE(of, ...) into the I2C part of the driver. The cs42l51_of_match[] array is also moved as well, as it is not possible to have this definition in one file, and the MODULE_DEVICE_TABLE(of, ...) invocation in another file, due to how MODULE_DEVICE_TABLE works. Thanks to this commit, the I2C part of the driver now properly autoloads, and thanks to its dependency on the core part, the core part gets autoloaded as well, resulting in a functional sound card without having to manually load kernel modules. Fixes: 2cb1e0259f50 ("ASoC: cs42l51: re-hook of_match_table pointer") Cc: stable@vger.kernel.org Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20230713112112.778576-1-thomas.petazzoni@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 registerMark Brown
commit f061e2be8689057cb4ec0dbffa9f03e1a23cdcb2 upstream. The WM8904_ADC_TEST_0 register is modified as part of updating the OSR controls but does not have a cache default, leading to errors when we try to modify these controls in cache only mode with no prior read: wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16 Add a read of the register to probe() to fill the cache and avoid both the error messages and the misconfiguration of the chip which will result. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11ASoC: fsl_spdif: Silence output on stopMatus Gajdos
[ Upstream commit 0e4c2b6b0c4a4b4014d9424c27e5e79d185229c5 ] Clear TX registers on stop to prevent the SPDIF interface from sending last written word over and over again. Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver") Signed-off-by: Matus Gajdos <matuszpd@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20230719164729.19969-1-matuszpd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27ASoC: imx-audmix: check return value of devm_kasprintf()Claudiu Beznea
[ Upstream commit 2f76e1d6ca524a888d29aafe29f2ad2003857971 ] devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: b86ef5367761 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230614121509.443926-1-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27ASoC: es8316: Do not set rate constraints for unsupported MCLKsCristian Ciocaltea
[ Upstream commit 60413129ee2b38a80347489270af7f6e1c1de4d0 ] When using the codec through the generic audio graph card, there are at least two calls of es8316_set_dai_sysclk(), with the effect of limiting the allowed sample rates according to the MCLK/LRCK ratios supported by the codec: 1. During audio card setup, to set the initial MCLK - see asoc_simple_init_dai(). 2. Before opening a stream, to update MCLK, according to the stream sample rate and the multiplication factor - see asoc_simple_hw_params(). In some cases the initial MCLK might be set to a frequency that doesn't match any of the supported ratios, e.g. 12287999 instead of 12288000, which is only 1 Hz below the supported clock, as that is what the hardware reports. This creates an empty list of rate constraints, which is further passed to snd_pcm_hw_constraint_list() via es8316_pcm_startup(), and causes the following error on the very first access of the sound card: $ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav Broken configuration for playback: no configurations available: Invalid argument Setting of hwparams failed: Invalid argument Note that all subsequent retries succeed thanks to the updated MCLK set at point 2 above, which uses a computed frequency value instead of a reading from the hardware registers. Normally this would have mitigated the issue, but es8316_pcm_startup() executes before the 2nd call to es8316_set_dai_sysclk(), hence it cannot make use of the updated constraints. Since es8316_pcm_hw_params() performs anyway a final validation of MCLK against the stream sample rate and the supported MCLK/LRCK ratios, fix the issue by ensuring that sysclk_constraints list is only set when at least one supported sample rate is autodetected by the codec. Fixes: b8b88b70875a ("ASoC: add es8316 codec driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27ASoC: es8316: Increment max value for ALC Capture Target Volume controlCristian Ciocaltea
[ Upstream commit 6f073429037cd79d7311cd8236311c53f5ea8f01 ] The following error occurs when trying to restore a previously saved ALSA mixer state (tested on a Rock 5B board): $ alsactl --no-ucm -f /tmp/asound.state store hw:Analog $ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument According to ES8316 datasheet, the register at address 0x2B, which is related to the above mixer control, contains by default the value 0xB0. Considering the corresponding ALC target bits (ALCLVL) are 7:4, the control is initialized with 11, which is one step above the maximum value allowed by the driver: ALCLVL | dB gain -------+-------- 0000 | -16.5 0001 | -15.0 0010 | -13.5 .... | ..... 0111 | -6.0 1000 | -4.5 1001 | -3.0 1010 | -1.5 .... | ..... 1111 | -1.5 The tests performed using the VU meter feature (--vumeter=TYPE) of arecord/aplay confirm the specs are correct and there is no measured gain if the 1011-1111 range would have been mapped to 0 dB: dB gain | VU meter % --------+----------- -6.0 | 30-31 -4.5 | 35-36 -3.0 | 42-43 -1.5 | 50-51 0.0 | 50-51 Increment the max value allowed for ALC Capture Target Volume control, so that it matches the hardware default. Additionally, update the related TLV to prevent an artificial extension of the dB gain range. Fixes: b8b88b70875a ("ASoC: add es8316 codec driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28ASoC: nau8824: Add quirk to active-high jack-detectEdson Juliano Drosdeck
[ Upstream commit e384dba03e3294ce7ea69e4da558e9bf8f0e8946 ] Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the DMI table, so that active-high jack-detect will work properly on these laptops. Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com> Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09ASoC: ssm2602: Add workaround for playback distortionsPaweł Anikiel
[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ] Apply a workaround for what appears to be a hardware quirk. The problem seems to happen when enabling "whole chip power" (bit D7 register R6) for the very first time after the chip receives power. If either "output" (D4) or "DAC" (D3) aren't powered on at that time, playback becomes very distorted later on. This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10: https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229 I suspect this happens only when using an external MCLK signal (which is the case for both of these boards). Here are some experiments run on a Google Chameleon v3. These were run in userspace using a wrapper around the i2cset utility: ssmset() { i2cset -y 0 0x1a $(($1*2)) $2 } For each of the following sequences, we apply power to the ssm2603 chip, set the configuration registers R0-R5 and R7-R8, run the selected sequence, and check for distortions on playback. ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK ssmset 0x09 0x01 # core ssmset 0x06 0x87 # out, dac ssmset 0x06 0x07 # chip OK (disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac (enable MCLK) OK ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac NOT OK ssmset 0x06 0x1f # chip ssmset 0x09 0x01 # core ssmset 0x06 0x07 # out, dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out ssmset 0x06 0x07 # dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac ssmset 0x06 0x07 # out NOT OK For each of the following sequences, we apply power to the ssm2603 chip, run the selected sequence, issue a reset with R15, configure R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check for distortions. ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK (disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac (enable MCLK after reset) NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out NOT OK ssmset 0x06 0x07 # chip, out, dac NOT OK Signed-off-by: Paweł Anikiel <pan@semihalf.com Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09ASoC: dwc: limit the number of overrun messagesMaxim Kochetkov
[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ] On slow CPU (FPGA/QEMU emulated) printing overrun messages from interrupt handler to uart console may leads to more overrun errors. So use dev_err_ratelimited to limit the number of error messages. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30ASoC: fsl_micfil: register platform component before registering cpu daiShengjiu Wang
[ Upstream commit 0adf292069dcca8bab76a603251fcaabf77468ca ] There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-23 04:49:10 +0000