aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/sh/rcar/ssi.c
AgeCommit message (Collapse)Author
2020-05-10ASoC: rsnd: Fix "status check failed" spam for multi-SSIMatthias Blankertz
[ Upstream commit 54cb6221688660670a2e430892d7f4e6370263b8 ] Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2 - the same logic as in rsnd_ssi_start. The attempt to disable these SSIs was harmless, but caused a "status check failed" message to be printed for every SSI in the multi-SSI setup. The disabling of interrupts is still performed, as they are enabled for all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the EN bit for an SSI where it was not set by rsnd_ssi_start. Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10ASoC: rsnd: Don't treat master SSI in multi SSI setup as parentMatthias Blankertz
[ Upstream commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd ] The master SSI of a multi-SSI setup was attached both to the RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream. This is not correct wrt. the meaning of being "parent" in the rest of the SSI code, where it seems to indicate an SSI that provides clock and word sync but is not transmitting/receiving audio data. Not treating the multi-SSI master as parent allows removal of various special cases to the rsnd_ssi_is_parent conditions introduced in commit a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode"). It also fixes the issue that operations performed via rsnd_dai_call() were performed twice for the master SSI. This caused some "status check failed" spam when stopping a multi-SSI stream as the driver attempted to stop the master SSI twice. Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10ASoC: rsnd: Fix parent SSI start/stop in multi-SSI modeMatthias Blankertz
[ Upstream commit a09fb3f28a60ba3e928a1fa94b0456780800299d ] The parent SSI of a multi-SSI setup must be fully setup, started and stopped since it is also part of the playback/capture setup. So only skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN correctly")) if the SSI is parent outside of a multi-SSI setup. Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-18ASoC: rsnd: do error check after rsnd_channel_normalization()Kuninori Morimoto
SSI need to use rsnd_channel_normalization() for TDM-split mode, thus, channel check need to do after that. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874l1aw39d.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26ASoC: rsnd: add missing pin sharing with SSI9Kuninori Morimoto
When SSI9 is sharing pin with SSI0, we need to care about it, but is missing. This patch fixup it. Reported-by: Hien Dang <hien.dang.eb@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Chaoliang Qin <chaoliang.qin.jg@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-25ASoC: rsnd: fixup 6ch settings to 8chKuninori Morimoto
rsnd need to use 8ch clock settings for 6ch for TDM. Otherwise, it can't work correctly. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count checkKuninori Morimoto
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Reported-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13Merge branch 'for-4.20' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-4.21 intel dep
2018-12-04ASoC: rsnd: indicates Channel and Mode for debugKuninori Morimoto
For TDM debug purpose, indicating Channel and Mode is very useful. This patch indicate it if it has #define DEBUG Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-21ASoC: rsnd: makes rsnd_ssi_is_dma_mode() staticKuninori Morimoto
ssi.c only is using rsnd_ssi_is_dma_mode(). Let's move it as static function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-06ASoC: rsnd: add TDM Split mode supportKuninori Morimoto
This patch adds TDM Split mode support. rsnd driver is assuming audio-graph-scu-card is used for Sound Card. This is very simple sample DT settings to use it. sound_card: sound { compatible = "audio-graph-scu-card"; ... convert-channels = <8>; /* TDM Split */ dais = <&rsnd_port0 /* playback ch1/ch2 */ &rsnd_port1 /* playback ch3/ch4 */ &rsnd_port2 /* playback ch5/ch6 */ &rsnd_port3 /* playback ch7/ch8 */ >; }; audio-codec { ... port { codec_0: endpoint@1 { remote-endpoint = <&rsnd_ep0>; }; codec_1: endpoint@2 { remote-endpoint = <&rsnd_ep1>; }; codec_2: endpoint@3 { remote-endpoint = <&rsnd_ep2>; }; codec_3: endpoint@4 { remote-endpoint = <&rsnd_ep3>; }; }; }; &rcar_sound { ... ports { rsnd_port0: port@0 { rsnd_ep0: endpoint { remote-endpoint = <&codec_0>; ... playback = <&ssiu30 &ssi3>; }; }; rsnd_port1: port@1 { rsnd_ep1: endpoint { remote-endpoint = <&codec_1>; ... playback = <&ssiu31 &ssi3>; }; }; rsnd_port2: port@2 { rsnd_ep2: endpoint { remote-endpoint = <&codec_2>; ... playback = <&ssiu32 &ssi3>; }; }; rsnd_port3: port@3 { rsnd_ep3: endpoint { remote-endpoint = <&codec_3>; ... playback = <&ssiu33 &ssi3>; }; }; }; }; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-06ASoC: rsnd: add SSIU BUSIF supportKuninori Morimoto
Gen2 has BUSIF0-3, Gen3 has BUSIF0-7 on some SSIU. Current driver is assuming it is using BUSIF0 as default. Thus, SSI is attaching SSIU (with BUSIF0) by using rsnd_ssiu_attach(). But, TDM split mode also needs other BUSIF to use it. This patch adds missing SSIU BUSIFx support. BUSIF is handled by SSIU instead of SSI anymore. Thus, its settings no longer needed on SSI node on DT. This patch removes its settings from Document, but driver is still keeping compatibility. Thus, old DT style is still working. But, to avoid confusing, it doesn't indicate old compatibility things on Document. New SoC should have SSIU on DT from this patch. 1) old style DT is still supported (= no rcar_sound,ssiu node on DT) 2) If ssiu is not indicated on playback/capture, BUSIF0 will be used as default playback = <&ssi3>; /* ssiu30 will be selected */ 3) you can select own ssiu playback = <&ssi32 &ssi3>; /* ssiu32 will be selected */ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-06ASoC: rsnd: move HDMI information from ssi.c to core.cKuninori Morimoto
Current driver is supporting HDMI output, and its information are handled under ssi.c. But, it is stream information. Let's move it from ssi.c to core.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-06ASoC: rsnd: rename rsnd_runtime_is_ssi_xxx()Kuninori Morimoto
Current rsnd driver has rsnd_runtime_is_ssi_xxx() functions, but it is not only related to SSI, thus, it is misunderstandable. This patch renames it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-06ASoC: rsnd: remove endpoint bidirectional checkKuninori Morimoto
DTC commit df536831d02c ("checks: add graph binding checks") is checking endpoint bidirectional, and it is upstreamed to linux by commit 50aafd60898a ("scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc"). Let's remove own bidirectional check Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-05ASoC: rsnd: rsnd_mod_name() handles both name and IDKuninori Morimoto
Current rsnd driver is using "%s[%d]" for mod name and ID, but, this ID portion might confusable. For example currently, CTU ID is 0 to 7, but using 00 to 13 (= 00, 01, 02, 03, 10, 11, 12, 13) is very best matching to datasheet. In the future, we will support BUSIFn, but it will be more complicated numbering. To avoid future confusable code, this patch modify rsnd_mod_name() to return understandable name. To avoid using pointless memory, it uses static char and snprintf, thus, rsnd_mod_name() user should use it immediately, and shouldn't keep its pointer. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-05ASoC: rsnd: move .get_status under rsnd_mod_opsKuninori Morimoto
Each mod needs to have .get_status, but current driver is handling it under rsnd_mod, instead of rsnd_mod_ops. It is not any make sence. This patch moves it to rsnd_mod_ops, and tidyup its parameter order to align to other callback functions. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-31ASoC: rsnd: fixup clock start checkerKuninori Morimoto
commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") fixuped clock start timing. But it exchanged clock start checker from ssi->usrcnt to ssi->rate. Current rsnd_ssi_master_clk_start() is called from .prepare, but some player (for example GStreamer) might calls it many times. In such case, the checker might returns error even though it was not error. It should check ssi->usrcnt instead of ssi->rate. This patch fixup it. Without this patch, GStreamer can't switch 48kHz / 44.1kHz. Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: rsnd: tidyup SSICR::SWSP for TDMKuninori Morimoto
R-Car datasheet is indicating that WS output settings of SSICR::SWSP is inverted on TDM mode from non TDM mode settings. But, it is meaning that TDM should use 0 here. Without this patch, sound input/output 1ch will be 2ch, 2ch will be 3ch ..., be jumbled on I2S + TDM settings. This patch fixup it. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: rsnd: enable TDM settings for SSI parentKuninori Morimoto
Some SSIs are sharing each pins (= WS/CLK pin for playback/capture). Then, SSI parent needs control WS/CLK setting for SSI slave. In such case, SSI parent needs TDM settings if SSI slave is working as TDM mode. But it is not cared in current driver. It can't capture TDM sound without this patch if SSIs were pin sharing. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 with TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03Merge branch 'asoc-4.19' into asoc-4.20 for rcar depMark Brown
2018-09-03ASoc: rsnd: dma: Calculate dma address with consider of BUSIFJiada Wang
DMA address calculated by rsnd_dma_addr() only considers BUSIF0 so far. But BUSIF1 ~ BUSIF7 also maybe used, in the future. This patch updates DMA address calculations, to also consider BUSIF number used by SSI. One note is that we can't support SSI9-4/5/6/7 so far, because its address is out of calculation rule. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstreaming] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: ssi: Check runtime channel number rather than hw_paramsJiada Wang
The number of channel handled by SSI maybe differs from the one set in hw_params, currently SSI checks hw_params's channel number, and constrains to use same channel number, when it is being used by multiple clients. This patch corrects to check runtime channel number rather than channel number set in hw_params. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstreaming] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: ssi: Fix issue in dma data address assignmentJiada Wang
Same SSI device may be used in different dai links, by only having one dma struct in rsnd_ssi, after the first instance's dma config be initilized, the following instances can no longer configure dma, this causes issue, when their dma data address are different from the first instance. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: add support for 8 bit S8 formatDragos Tarcatu
This patch adds support for SNDRV_PCM_FMTBIT_S8 format. Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: add support for 16/24 bit slot widthsDragos Tarcatu
The slot width (system word length) was fixed at 32 bits. This patch allows also setting it to 16 or 24 bits. Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: fixup not to call clk_get/set under non-atomicJiada Wang
Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-06-22Merge branch 'asoc-4.18' into asoc-4.19 for amd depMark Brown
2018-06-18ASoC: rsnd: SSI parent cares SWSP bitKuninori Morimoto
SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st channel polarity (low or hi). This bit shouldn't exchange after running. Current SSI "parent" doesn't care SSICR, just controls clock only. Because of this behavior, if platform uses SSI0 as playback, SSI1 as capture, and if user starts capture -> playback order, SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes capture noise. This patch cares SSICR on SSI parent, too. Special thanks to Yokoyama-san Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: has .symmetric_rates if SSIs are sharing WS pinKuninori Morimoto
If SSIs are sharing WS pin, it should has .symmetric_rates. This patch sets it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-16ASoC: rsnd: ssi: wait maximum 5ms for status checkKuninori Morimoto
It is waiting udelay(50) x 1024 (= 50ms) for status check in worst case, but it is overkill. And we shouldn't use udelay() for 50us (linux/Documentation/timers/timers-howto.txt) Waiting maximum udelay(5) x 1024 (= 5ms) is very enough for status check. This patch fixes these issue. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: don't assume node full path name for HDMI probingKuninori Morimoto
Current ssi.c is assuming below 2 things to probing HDMI node. 1) remote node is including "hdmi0" or "hdmi1" in node name 2) remote_ep->full_name is including full path name But, these assumptions are broken by below 1) Node names should not use numerical suffixes commit 6b5ac2f1cb11 ("arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes") 2) node full_name no longer include full path name commit a7e4cfb0a7ca ("of/fdt: only store the device node basename in full_name") Because of these reasons, ssi.c can't probe HDMI on current kernel. This patch probes HDMI0/1 by using its address. Note is that we need to keep updating for this address for future generation chip. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-13ASoC: rsnd: indicate IRQ error status for debugKuninori Morimoto
SSI/SRC have under/over flow error handling, and its status is useful for debuging. But sometimes it might be too much message, and it might blocks necessity other information. To avoid such situation, basically this patch indicates interrupt status debug message if DEBUG was defined, but it will be suppressed if RSND_DEBUG_NO_IRQ_STATUS was defined. Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: rsnd: PIO related function cleanupKuninori Morimoto
SSI had shared counting pointer position method between PIO/DMA mode before. But now DMA mode is using DMAEngine feature to get it. Thus, this counting pointer position method is needed for only PIO mode. We don't need to share code anymore. This patch names PIO related functions as rsnd_ssi_pio_xxx(), and merged/cleanuped each feature. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: rsnd: don't use runtime->sample_bitsKuninori Morimoto
Current rsnd driver is judging 16bit/24bit data by using runtime->sample_bits, but it is indicating physical size, not format size. This is confusable code. This patch uses snd_pcm_format_width() to be more correct code. Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: rsnd: ssi: remove unnesessary period_posJiada Wang
period_pos can always be calculated by byte_pos and byte_per_period, there is no reason to maintain this variable in rsnd_dai_stream. This patch removes period_pos from rsnd_ssi and calculates next_period_byte with consideration of actual byte_pos value. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_updateJiada Wang
Currently there is race condition between set of byte_pos and wrap it around when new buffer starts. If .pointer is called in-between it will result in inconsistent pointer position be returned from .pointer callback. This patch increments buffer pointer atomically to avoid this issue. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown
2017-11-01ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_modKuninori Morimoto
SSI parent mod might be NULL. ssi_parent_mod() needs to care about it. Otherwise, it uses negative shift. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-31ASoC: rsnd: Don't check SSISR::DIRQ when CaptureKuninori Morimoto
When stop case, it was Playback, it need to check all data were completely sent. But in Capture case, it might not receive data anymore. SSISR::DIRQ check is not need for Capture case. Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-04ASoC: rsnd: add generic rsnd_flags_xxx() macroKuninori Morimoto
SSI is using rsnd_ssi_flags_xxx() macro to control flags. But it is useful macro not only for SSI. This patch replace it to more generic rsnd_flags_xxx(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-03ASoC: rcar: skip disabled-SSI nodesKuninori Morimoto
The current device tree representation of the R-Car SSI assumes that they are numbered consecutively, starting from 0. Alas, this is not the case with the R8A77995 (D3) SoC which SSI1/SSI2 aren't present. In order to keep the existing device trees working, I'm suggesting to use a disabled node for SSI0/SSI1. Teach the SSI probe to just skip disabled nodes. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-22ASoC: rsnd: remove unused rsnd_xxx_to_dma()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10ASoC: rsnd: call request_irq/free_irq once in MIX caseKuninori Morimoto
Each module's dai callback function availability is controlled by mod->status. For example "always called", "call once". In .probe/.remove case, it needs to be called always, because .probe will call xxx_attach() function on .probe, especially if platform is using MIXer. For example, below case, MIX0/DVC0/SSI0 needs to be called twice. playback = <&src0 &ctu02 &mix0 &dvc0 &ssi0>; playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; But in this case, SSI0 will call request_irq() twice. This patch add new RSND_SSI_PROBED flag and control it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10ASoC: rsnd: add rsnd_ssi_flags_has/add() macroKuninori Morimoto
Current rsnd_ssi_mode_flags() is not useful. This patch adds new rsnd_ssi_flags_has/add() macro for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10ASoC: rsnd: call free_irq() both DMA/PIO modeKuninori Morimoto
commit 701172dca15b ("ASoC: rsnd: don't use devm_request_irq() for SSI") exchanged devm_request_irq() to request_irq() for SSI, because SSI will fallback into PIO mode if DMA doesn't work. But, because of it, PIO mode needed to call free_irq() when removing, not only DMA mode. This patch call free_irq() both PIO/DMA. Otherwise, rsnd IRQ handler will be increased if user tried many unbind/bind. Fixes: 701172dca15b ("ASoC: rsnd: don't use devm_request_irq() for SSI") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10Merge branch 'fix/rcar' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rcar
2017-08-09ASoC: rsnd: avoid duplicate free_irq()Kuninori Morimoto
commit 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") fixed Parent SSI duplicate free_irq(). But on Renesas Sound, not only Parent SSI but also Multi SSI have same issue. This patch avoid duplicate free_irq() if it was not pure SSI. Fixes: 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-24 23:58:55 +0000