Age | Commit message (Collapse) | Author |
|
When CONFIG_KEXEC_VERIFY_SIG is enabled, the kexec_file_load syscall
requires the kexec'd kernel image to be signed. Distros are concerned
about totally disabling the kexec_load syscall. As a compromise, the
kexec_load syscall will only be disabled when CONFIG_KEXEC_VERIFY_SIG
is configured and the system is booted with secureboot enabled.
This patch disables the kexec_load syscall only for systems booted with
secureboot enabled.
[zohar@linux.ibm.com: add missing mesage on kexec_load failure]
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Before this patch, during a policy reload the sidtab would become frozen
and trying to map a new context to SID would be unable to add a new
entry to sidtab and fail with -ENOMEM.
Such failures are usually propagated into userspace, which has no way of
distignuishing them from actual allocation failures and thus doesn't
handle them gracefully. Such situation can be triggered e.g. by the
following reproducer:
while true; do load_policy; echo -n .; sleep 0.1; done &
for (( i = 0; i < 1024; i++ )); do
runcon -l s0:c$i echo -n x || break
# or:
# chcon -l s0:c$i <some_file> || break
done
This patch overhauls the sidtab so it doesn't need to be frozen during
policy reload, thus solving the above problem.
The new SID table leverages the fact that SIDs are allocated
sequentially and are never invalidated and stores them in linear buckets
indexed by a tree structure. This brings several advantages:
1. Fast SID -> context lookup - this lookup can now be done in
logarithmic time complexity (usually in less than 4 array lookups)
and can still be done safely without locking.
2. No need to re-search the whole table on reverse lookup miss - after
acquiring the spinlock only the newly added entries need to be
searched, which means that reverse lookups that end up inserting a
new entry are now about twice as fast.
3. No need to freeze sidtab during policy reload - it is now possible
to handle insertion of new entries even during sidtab conversion.
The tree structure of the new sidtab is able to grow automatically to up
to about 2^31 entries (at which point it should not have more than about
4 tree levels). The old sidtab had a theoretical capacity of almost 2^32
entries, but half of that is still more than enough since by that point
the reverse table lookups would become unusably slow anyway...
The number of entries per tree node is selected automatically so that
each node fits into a single page, which should be the easiest size for
kmalloc() to handle.
Note that the cache for reverse lookup is preserved with equivalent
logic. The only difference is that instead of storing pointers to the
hash table nodes it stores just the indices of the cached entries.
The new cache ensures that the indices are loaded/stored atomically, but
it still has the drawback that concurrent cache updates may mess up the
contents of the cache. Such situation however only reduces its
effectivity, not the correctness of lookups.
Tested by selinux-testsuite and thoroughly tortured by this simple
stress test:
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Link: https://github.com/SELinuxProject/selinux-kernel/issues/38
Reported-by: Orion Poplawski <orion@nwra.com>
Reported-by: Li Kun <hw.likun@huawei.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: most of sidtab.c merged by hand due to conflicts]
[PM: checkpatch fixes in mls.c, services.c, sidtab.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This moves handling of initial SIDs into a separate table. Note that the
SIDs stored in the main table are now shifted by SECINITSID_NUM and
converted to/from the actual SIDs transparently by helper functions.
This change doesn't make much sense on its own, but it simplifies
further sidtab overhaul in a succeeding patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fixed some checkpatch warnings on line length, whitespace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Function smack_key_permission() only issues smack requests for the
following operations:
- KEY_NEED_READ (issues MAY_READ)
- KEY_NEED_WRITE (issues MAY_WRITE)
- KEY_NEED_LINK (issues MAY_WRITE)
- KEY_NEED_SETATTR (issues MAY_WRITE)
A blank smack request is issued in all other cases, resulting in
smack access being granted if there is any rule defined between
subject and object, or denied with -EACCES otherwise.
Request MAY_READ access for KEY_NEED_SEARCH and KEY_NEED_VIEW.
Fix the logic in the unlikely case when both MAY_READ and
MAY_WRITE are needed. Validate access permission field for valid
contents.
Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fix from Paul Moore:
"One more SELinux fix for v4.20: add some missing netlink message to
SELinux permission mappings. The netlink messages were added in v4.19,
but unfortunately we didn't catch it then because the mechanism to
catch these things was bypassed.
In addition to adding the mappings, we're adding some comments to the
code to hopefully prevent bypasses in the future"
* tag 'selinux-pr-20181129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN
|
|
Commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
added new RTM_* definitions without properly updating SELinux, this
patch adds the necessary SELinux support.
While there was a BUILD_BUG_ON() in the SELinux code to protect from
exactly this case, it was bypassed in the broken commit. In order to
hopefully prevent this from happening in the future, add additional
comments which provide some instructions on how to resolve the
BUILD_BUG_ON() failures.
Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
Cc: <stable@vger.kernel.org> # 4.19
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There are many places, notably audit_log_task_info() and
audit_log_exit(), that take task_struct pointers but in reality they
are always working on the current task. This patch eliminates the
task_struct arguments and uses current directly which allows a number
of cleanups as well.
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Those strings aren't written.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
If a superblock has the MS_SUBMOUNT flag set, we should always allow
mounting it. These mounts are done automatically by the kernel either as
part of mounting some parent mount (e.g. debugfs always mounts tracefs
under "tracing" for compatibility) or they are mounted automatically as
needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such
automounts are either an implicit consequence of the parent mount (which
is already checked) or they can happen during regular accesses (where it
doesn't make sense to check against the current task's context), the
mount permission check should be skipped for them.
Without this patch, attempts to access contents of an automounted
directory can cause unexpected SELinux denials.
In the current kernel tree, the MS_SUBMOUNT flag is set only via
vfs_submount(), which is called only from the following places:
- AFS, when automounting special "symlinks" referencing other cells
- CIFS, when automounting "referrals"
- NFS, when automounting subtrees
- debugfs, when automounting tracefs
In all cases the submounts are meant to be transparent to the user and
it makes sense that if mounting the master is allowed, then so should be
the automounts. Note that CAP_SYS_ADMIN capability checking is already
skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in:
- sget_userns() in fs/super.c:
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) &&
!(type->fs_flags & FS_USERNS_MOUNT) &&
!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
- sget() in fs/super.c:
/* Ensure the requestor has permissions over the target filesystem */
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
Verified internally on patched RHEL 7.6 with a reproducer using
NFS+httpd and selinux-tesuite.
Fixes: 93faccbbfa95 ("fs: Better permission checking for submounts")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This is a purely cosmetic change that encapsulates the three-step sidtab
conversion logic (shutdown -> clone -> map) into a single function
defined in sidtab.c (as opposed to services.c).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespaces fixes to make checkpatch happy]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect. Many users therefore
already don't pass it, but some still do. This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.
Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two small SELinux fixes for v4.20.
Ondrej's patch adds a check on user input, and my patch ensures we
don't look past the end of a buffer.
Both patches are quite small and pass the selinux-testsuite"
* tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix non-MLS handling in mls_context_to_sid()
selinux: check length properly in SCTP bind hook
|
|
Commit 95ffe194204a ("selinux: refactor mls_context_to_sid() and make
it stricter") inadvertently changed how we handle labels that did not
contain MLS information. This patch restores the proper behavior in
mls_context_to_sid() and adds a comment explaining the proper
behavior to help ensure this doesn't happen again.
Fixes: 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
On systems with IMA-appraisal enabled with a policy requiring file
signatures, the "good" signature values are stored on the filesystem as
extended attributes (security.ima). Signature verification failure
would normally be limited to just a particular file (eg. executable),
but during boot signature verification failure could result in a system
hang.
Defining and requiring a new public_key_signature field requires all
callers of asymmetric signature verification to be updated to reflect
the change. This patch updates the integrity asymmetric_verify()
caller.
Fixes: 82f94f24475c ("KEYS: Provide software public key query function [ver #2]")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.
The length of the whole address ('len') is already checked in the
callees.
Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
On systems with IMA-appraisal enabled with a policy requiring file
signatures, the "good" signature values are stored on the filesystem as
extended attributes (security.ima). Signature verification failure
would normally be limited to just a particular file (eg. executable),
but during boot signature verification failure could result in a system
hang.
Defining and requiring a new public_key_signature field requires all
callers of asymmetric signature verification to be updated to reflect
the change. This patch updates the integrity asymmetric_verify()
caller.
Fixes: 82f94f24475c ("KEYS: Provide software public key query function [ver #2]")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Denis Kenzior <denkenz@gmail.com>
|
|
The TPM specs defines PCR index as a positive number, and there is
no reason to use a signed number. It is also a possible security
issue as currently no functions check for a negative index,
which may become a large number when converted to u32.
Adjust the API to use u32 instead of int in all PCR related
functions.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Sync to Linux 4.20-rc2 for downstream developers.
|
|
Do the LE conversions before doing the Infiniband-related range checks.
The incorrect checks are otherwise causing a failure to load any policy
with an ibendportcon rule on BE systems. This can be reproduced by
running (on e.g. ppc64):
cat >my_module.cil <<EOF
(type test_ibendport_t)
(roletype object_r test_ibendport_t)
(ibendportcon mlx4_0 1 (system_u object_r test_ibendport_t ((s0) (s0))))
EOF
semodule -i my_module.cil
Also, fix loading/storing the 64-bit subnet prefix for OCON_IBPKEY to
use a correctly aligned buffer.
Finally, do not use the 'nodebuf' (u32) buffer where 'buf' (__le32)
should be used instead.
Tested internally on a ppc64 machine with a RHEL 7 kernel with this
patch applied.
Cc: Daniel Jurgens <danielj@mellanox.com>
Cc: Eli Cohen <eli@mellanox.com>
Cc: James Morris <jmorris@namei.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: a806f7a1616f ("selinux: Create policydb version for Infiniband support")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features/Improvements:
- replace spin_is_locked() with lockdep
- add base support for secmark labeling and matching
Cleanups:
- clean an indentation issue, remove extraneous space
- remove no-op permission check in policy_unpack
- fix checkpatch missing spaces error in Parse secmark policy
- fix network performance issue in aa_label_sk_perm
Bug fixes:
- add #ifdef checks for secmark filtering
- fix an error code in __aa_create_ns()
- don't try to replace stale label in ptrace checks
- fix failure to audit context info in build_change_hat
- check buffer bounds when mapping permissions mask
- fully initialize aa_perms struct when answering userspace query
- fix uninitialized value in aa_split_fqname"
* tag 'apparmor-pr-2018-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: clean an indentation issue, remove extraneous space
apparmor: fix checkpatch error in Parse secmark policy
apparmor: add #ifdef checks for secmark filtering
apparmor: Fix uninitialized value in aa_split_fqname
apparmor: don't try to replace stale label in ptraceme check
apparmor: Replace spin_is_locked() with lockdep
apparmor: Allow filtering based on secmark policy
apparmor: Parse secmark policy
apparmor: Add a wildcard secid
apparmor: don't try to replace stale label in ptrace access check
apparmor: Fix network performance issue in aa_label_sk_perm
|
|
Trivial fix to clean up an indentation issue, remove space
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Fix missed spacing error reported by checkpatch for
9caafbe2b4cf ("Parse secmark policy")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
This patch exposes some common functionality needed to send TPM commands.
Several functions from keys/trusted.c are exposed for use by the new tpm
key subtype and a module dependency is introduced.
In the future, common functionality between the trusted key type and the
asym_tpm subtype should be factored out into a common utility library.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Provide five keyctl functions that permit userspace to make use of the new
key type ops for accessing and driving asymmetric keys.
(*) Query an asymmetric key.
long keyctl(KEYCTL_PKEY_QUERY,
key_serial_t key, unsigned long reserved,
struct keyctl_pkey_query *info);
Get information about an asymmetric key. The information is returned
in the keyctl_pkey_query struct:
__u32 supported_ops;
A bit mask of flags indicating which ops are supported. This is
constructed from a bitwise-OR of:
KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY}
__u32 key_size;
The size in bits of the key.
__u16 max_data_size;
__u16 max_sig_size;
__u16 max_enc_size;
__u16 max_dec_size;
The maximum sizes in bytes of a blob of data to be signed, a signature
blob, a blob to be encrypted and a blob to be decrypted.
reserved must be set to 0. This is intended for future use to hand
over one or more passphrases needed unlock a key.
If successful, 0 is returned. If the key is not an asymmetric key,
EOPNOTSUPP is returned.
(*) Encrypt, decrypt, sign or verify a blob using an asymmetric key.
long keyctl(KEYCTL_PKEY_ENCRYPT,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
void *out);
long keyctl(KEYCTL_PKEY_DECRYPT,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
void *out);
long keyctl(KEYCTL_PKEY_SIGN,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
void *out);
long keyctl(KEYCTL_PKEY_VERIFY,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
const void *in2);
Use an asymmetric key to perform a public-key cryptographic operation
a blob of data.
The parameter block pointed to by params contains a number of integer
values:
__s32 key_id;
__u32 in_len;
__u32 out_len;
__u32 in2_len;
For a given operation, the in and out buffers are used as follows:
Operation ID in,in_len out,out_len in2,in2_len
======================= =============== =============== ===========
KEYCTL_PKEY_ENCRYPT Raw data Encrypted data -
KEYCTL_PKEY_DECRYPT Encrypted data Raw data -
KEYCTL_PKEY_SIGN Raw data Signature -
KEYCTL_PKEY_VERIFY Raw data - Signature
info is a string of key=value pairs that supply supplementary
information.
The __spare space in the parameter block must be set to 0. This is
intended, amongst other things, to allow the passing of passphrases
required to unlock a key.
If successful, encrypt, decrypt and sign all return the amount of data
written into the output buffer. Verification returns 0 on success.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull LoadPin updates from James Morris:
"From Kees: This is a small reporting improvement and the param change
needed for the ordering series (but since the loadpin change is
desired and separable, I'm putting it here)"
* 'next-loadpin' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LoadPin: Rename boot param "enabled" to "enforce"
LoadPin: Report friendly block device name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull smack updates from James Morris:
"From Casey: three patches for Smack for 4.20. Two clean up warnings
and one is a rarely encountered ptrace capability check"
* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: Mark expected switch fall-through
Smack: ptrace capability use fixes
Smack: remove set but not used variable 'root_inode'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
"From Mimi: This contains a couple of bug fixes, including one for a
recent problem with calculating file hashes on overlayfs, and some
code cleanup"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
MAINTAINERS: add Jarkko as maintainer for trusted keys
ima: open a new file instance if no read permissions
ima: fix showing large 'violations' or 'runtime_measurements_count'
security/integrity: remove unnecessary 'init_keyring' variable
security/integrity: constify some read-only data
vfs: require i_size <= SIZE_MAX in kernel_read_file()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"In this patchset, there are a couple of minor updates, as well as some
reworking of the LSM initialization code from Kees Cook (these prepare
the way for ordered stackable LSMs, but are a valuable cleanup on
their own)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Don't ignore initialization failures
LSM: Provide init debugging infrastructure
LSM: Record LSM name in struct lsm_info
LSM: Convert security_initcall() into DEFINE_LSM()
vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
LSM: Convert from initcall to struct lsm_info
LSM: Remove initcall tracing
LSM: Rename .security_initcall section to .lsm_info
vmlinux.lds.h: Avoid copy/paste of security_init section
LSM: Correctly announce start of LSM initialization
security: fix LSM description location
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
seccomp: remove unnecessary unlikely()
security: tomoyo: Fix obsolete function
security/capabilities: remove check for -EINVAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Three SELinux patches for v4.20, all fall under the bug-fix or
behave-better category, which is good. All three have pretty good
descriptions too, which is even better"
* tag 'selinux-pr-20181022' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: Add __GFP_NOWARN to allocation at str_read()
selinux: refactor mls_context_to_sid() and make it stricter
selinux: fix mounting of cgroup2 under older policies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into next-loadpin
LoadPin: report improvement and parameter renaming
- Report human-readable device name during init
- Change boot parameter and Kconfig "enabled" to "enforce"
|
|
LoadPin's "enabled" setting is really about enforcement, not whether
or not the LSM is using LSM hooks. Instead, split this out so that LSM
enabling can be logically distinct from whether enforcement is happening
(for example, the pinning happens when the LSM is enabled, but the pin
is only checked when "enforce" is set). This allows LoadPin to continue
to operate sanely in test environments once LSM enable/disable is
centrally handled (i.e. we want LoadPin to be enabled separately from
its enforcement).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
|
|
Instead of only reporting major/minor, include the actual block device
name, at least as seen by the kernel.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The newly added code fails to build when either SECMARK or
NETFILTER are disabled:
security/apparmor/lsm.c: In function 'apparmor_socket_sock_rcv_skb':
security/apparmor/lsm.c:1138:12: error: 'struct sk_buff' has no member named 'secmark'; did you mean 'mark'?
security/apparmor/lsm.c:1671:21: error: 'struct nf_hook_state' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
Add a set of #ifdef checks around it to only enable the code that
we can compile and that makes sense in that configuration.
Fixes: ab9f2115081a ("apparmor: Allow filtering based on secmark policy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
LSM initialization failures have traditionally been ignored. We should
at least WARN when something goes wrong.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Booting with "lsm.debug" will report future details on how LSM ordering
decisions are being made.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
In preparation for making LSM selections outside of the LSMs, include
the name of LSMs in struct lsm_info.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Instead of using argument-based initializers, switch to defining the
contents of struct lsm_info on a per-LSM basis. This also drops
the final use of the now inaccurate "initcall" naming.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
In preparation for doing more interesting LSM init probing, this converts
the existing initcall system into an explicit call into a function pointer
from a section-collected struct lsm_info array.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
This partially reverts commit 58eacfffc417 ("init, tracing: instrument
security and console initcall trace events") since security init calls
are about to no longer resemble regular init calls.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
In preparation for switching from initcall to just a regular set of
pointers in a section, rename the internal section name.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
For a while now, the LSM core has said it was "initializED", rather than
"initializING". This adjust the report to be more accurate (i.e. before
this was reported before any LSMs had been initialized.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Open a new file instance as opposed to changing file->f_mode when
the file is not readable. This is done to accomodate overlayfs
stacked file operations change. The real struct file is hidden
behind the overlays struct file. So, any file->f_mode manipulations are
not reflected on the real struct file. Open the file again in read mode
if original file cannot be read, read and calculate the hash.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: stable@vger.kernel.org (linux-4.19)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value. Increase it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The 'init_keyring' variable actually just gave the value of
CONFIG_INTEGRITY_TRUSTED_KEYRING. We should check the config option
directly instead. No change in behavior; this just simplifies the code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Constify some static data that is never modified,
so that it is placed in .rodata.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.
The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.
So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.
The definition of struct kernel_siginfo I have put in include/signal_types.h
A set of buildtime checks has been added to verify the two structures have
the same field offsets.
To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Syzkaller reported a OOB-read with the stacktrace below. This occurs
inside __aa_lookupn_ns as `n` is not initialized. `n` is obtained from
aa_splitn_fqname. In cases where `name` is invalid, aa_splitn_fqname
returns without initializing `ns_name` and `ns_len`.
Fix this by always initializing `ns_name` and `ns_len`.
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
memcmp+0xe3/0x160 lib/string.c:861
strnstr+0x4b/0x70 lib/string.c:934
__aa_lookupn_ns+0xc1/0x570 security/apparmor/policy_ns.c:209
aa_lookupn_ns+0x88/0x1e0 security/apparmor/policy_ns.c:240
aa_fqlookupn_profile+0x1b9/0x1010 security/apparmor/policy.c:468
fqlookupn_profile+0x80/0xc0 security/apparmor/label.c:1844
aa_label_strn_parse+0xa3a/0x1230 security/apparmor/label.c:1908
aa_label_parse+0x42/0x50 security/apparmor/label.c:1943
aa_change_profile+0x513/0x3510 security/apparmor/domain.c:1362
apparmor_setprocattr+0xaa4/0x1150 security/apparmor/lsm.c:658
security_setprocattr+0x66/0xc0 security/security.c:1298
proc_pid_attr_write+0x301/0x540 fs/proc/base.c:2555
__vfs_write+0x119/0x9f0 fs/read_write.c:485
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 3b0aaf5866bf ("apparmor: add lib fn to find the "split" for fqnames")
Reported-by: syzbot+61e4b490d9d2da591b50@syzkaller.appspotmail.com
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|