Age | Commit message (Collapse) | Author |
|
[ Upstream commit efe84d408bf41975db8506d3a1cc02e794e2309c ]
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 516d980f85415d76ae3d0d2a871eb20243f46c95 ]
PowerPC allmodconfig often fails to build as follows:
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD .tmp_vmlinux.kallsyms3
KSYM .tmp_vmlinux.kallsyms3.o
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make[2]: *** [../Makefile:1162: vmlinux] Error 1
Setting KALLSYMS_EXTRA_PASS=1 does not help.
This is caused by the compiler inserting stubs such as *.long_branch.*
and *.plt_branch.*
$ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2
[ snip ]
c00000000210c010 t 00000075.plt_branch.da9:19
c00000000210c020 t 00000075.plt_branch.1677:5
c00000000210c030 t 00000075.long_branch.memmove
c00000000210c034 t 00000075.plt_branch.9e0:5
c00000000210c044 t 00000075.plt_branch.free_initrd_mem
...
Actually, the problem mentioned in scripts/link-vmlinux.sh comments;
"In theory it's possible this results in even more stubs, but unlikely"
is happening here, and ends up with another kallsyms step required.
scripts/kallsyms.c already ignores various compiler stubs. Let's do
similar to make kallsysms for PowerPC always succeed in 2 steps.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a608b6a646e8816bc0db156baad2e0679fa4d137 ]
Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete
to free array") fixed two lines, but there is one more.
(cppcheck does not report it for some reason...)
This was detected by Clang.
"make HOSTCXX=clang++ xconfig" reports the following:
scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete]
delete data;
^
[]
scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here
char *data = new char[count + 1];
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream.
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a73fbfce2cc28883f659414d598e6e60ca2214b4 upstream.
A user reported:
'Use of uninitialized value $ENV{"LMC_KEEP"} in split at
./scripts/kconfig/streamline_config.pl line 596.'
so first check that $ENV{LMC_KEEP} is defined before trying
to use it.
Fixes: c027b02d89fd ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 53efe2e76ca2bfad7f35e0b5330e2ccd44a643e3 ]
qconf is supposed to work with Qt4 and Qt5, but since commit
c4f7398bee9c ("kconfig: qconf: make debug links work again"),
building with Qt4 fails as follows:
HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::clicked(const QUrl&)’:
scripts/kconfig/qconf.cc:1241:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1241 | qInfo() << "Clicked link is empty";
| ^~~~~
| setInfo
scripts/kconfig/qconf.cc:1254:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1254 | qInfo() << "Clicked symbol is invalid:" << data;
| ^~~~~
| setInfo
make[1]: *** [scripts/Makefile.host:129: scripts/kconfig/qconf.o] Error 1
make: *** [Makefile:606: xconfig] Error 2
qInfo() does not exist in Qt4. In my understanding, these call-sites
should be unreachable. Perhaps, qWarning(), assertion, or something
is better, but qInfo() is not the right one to use here, I think.
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Reported-by: Ronald Warsow <rwarsow@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d85de3399f97467baa2026fbbbe587850d01ba8a ]
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ]
If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:
if (e->y() <= header()->geometry().bottom()) {
Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.
Since the origin of e->y() starts from the bottom of the header,
this check is odd.
Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3df14264ad9930733a8166e5bd0eccc1727564bb ]
Commit ea0eada45632 leads to the following build failure on powerpc:
HOSTCC scripts/recordmcount
scripts/recordmcount.c: In function 'arm64_is_fake_mcount':
scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function)
scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once
scripts/recordmcount.c:440: error: for each function it appears in.)
make[2]: *** [scripts/recordmcount] Error 1
Make sure R_AARCH64_CALL26 is always defined.
Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Gregory Herrero <gregory.herrero@oracle.com>
Cc: Gregory Herrero <gregory.herrero@oracle.com>
Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 382c2b5d23b4245f1818f69286db334355488dc4 ]
commit e3e0b582c321 ("selinux: remove unused initial SIDs and improve
handling") broke scripts/selinux/mdp since the unused initial SID names
were removed and the corresponding generation of policy initial SID
definitions by mdp was not updated accordingly. Fix it. With latest
upstream checkpolicy it is no longer necessary to include the SID context
definitions for the unused initial SIDs but retain them for compatibility
with older checkpolicy.
Fixes: e3e0b582c321 ("selinux: remove unused initial SIDs and improve handling")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea0eada45632f4807b2f49de951072283e2d781c ]
Currently, if a section has a relocation to '_mcount' symbol, a new
__mcount_loc entry will be added whatever the relocation type is.
This is problematic when a relocation to '_mcount' is in the middle of a
section and is not a call for ftrace use.
Such relocation could be generated with below code for example:
bool is_mcount(unsigned long addr)
{
return (target == (unsigned long) &_mcount);
}
With this snippet of code, ftrace will try to patch the mcount location
generated by this code on module load and fail with:
Call trace:
ftrace_bug+0xa0/0x28c
ftrace_process_locs+0x2f4/0x430
ftrace_module_init+0x30/0x38
load_module+0x14f0/0x1e78
__do_sys_finit_module+0x100/0x11c
__arm64_sys_finit_module+0x28/0x34
el0_svc_common+0x88/0x194
el0_svc_handler+0x38/0x8c
el0_svc+0x8/0xc
---[ end trace d828d06b36ad9d59 ]---
ftrace failed to modify
[<ffffa2dbf3a3a41c>] 0xffffa2dbf3a3a41c
actual: 66:a9:3c:90
Initializing ftrace call sites
ftrace record flags: 2000000
(0)
expected tramp: ffffa2dc6cf66724
So Limit the relocation type to R_AARCH64_CALL26 as in perl version of
recordmcount.
Fixes: af64d2aa872a ("ftrace: Add arm64 support to recordmcount")
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 55c7549819e438f40a3ef1d8ac5c38b73390bcb7 upstream.
When running `make coccicheck` in report mode using the
add_namespace.cocci file, it will fail for files that contain
MODULE_LICENSE. Those match the replacement precondition, but spatch
errors out as virtual.ns is not set.
In order to fix that, add the virtual rule nsdeps and only do search and
replace if that rule has been explicitly requested.
In order to make spatch happy in report mode, we also need a dummy rule,
as otherwise it errors out with "No rules apply". Using a script:python
rule appears unrelated and odd, but this is the shortest I could come up
with.
Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough
`make nsdeps`.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Fixes: c7c4e29fb5a4 ("scripts: add_namespace: Fix coccicheck failed")
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: jeyu@kernel.org
Cc: cocci@systeme.lip6.fr
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200604164145.173925-1-maennich@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same code exists a few lines above.
Fixes: 436b2ac603d5 ("modpost: invoke modpost only when input files are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).
Commit cc1c08edccaf ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)
This function does not work. Remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit cc1c08edccaf5317d99a17a3231fe06381044e83.
Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)
Or, the following is simple test code that makes it crash:
menu "Menu"
config FOO
bool "foo"
default y
menuconfig BAR
bool "bar"
depends on FOO
endmenu
Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.
When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().
item = last ? last->nextSibling() : firstChild();
However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.
I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.
In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".
menu "Menu1"
config FOO
bool "foo"
default y
menu "Menu2"
depends on FOO
menu "Menu3"
config BAZ
bool "baz"
endmenu
endmenu
endmenu
It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.
Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 5752ff07fd90d764d96e3c586cc95c09598abfdd.
It added dead code to ConfigList:ConfigList().
The constructor of ConfigList has the initializer, mode(singleMode).
if (mode == symbolMode)
setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
else
setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
... always takes the else part.
The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".
ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Every time the goback icon is clicked, the annoying message "goBack"
is displayed on the console.
I guess this line is the left-over debug code of commit af737b4defe1
("kconfig: qconf: simplify the goBack() logic").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cppcheck reports "Mismatching allocation and deallocation".
$ cppcheck scripts/kconfig/qconf.cc
Checking scripts/kconfig/qconf.cc ...
scripts/kconfig/qconf.cc:1242:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
delete data;
^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
char *data = new char[count + 1];
^
scripts/kconfig/qconf.cc:1242:10: note: Mismatching allocation and deallocation: data
delete data;
^
scripts/kconfig/qconf.cc:1255:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
delete data;
^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
char *data = new char[count + 1];
^
scripts/kconfig/qconf.cc:1255:10: note: Mismatching allocation and deallocation: data
delete data;
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, qconf.moc is included from qconf.cc but they can be compiled
independently.
When you modify qconf.cc, qconf.moc does not need recompiling.
Rename qconf.moc to qconf-moc.cc, and split it out as an independent
compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Regenerate qconf.moc when the moc command is changed.
This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Mention why we open-code strsep, so it is clear that it is intentional.
Fixes: 736bb11898ef ("modpost: remove use of non-standard strsep() in HOSTCC code")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master
Pull Kbuild fixes from Masahiro Yamada:
- do not use non-portable strsep() in a host program
- fix single target builds for external modules
- change Clang's --prefix option to make it work for the latest Clang
* tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
kbuild: fix single target builds for external modules
modpost: remove use of non-standard strsep() in HOSTCC code
|
|
Commit ed66f991bb19 ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in linux/build
loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
Python Exception <class 'gdb.error'> There is no member named name.:
Error occurred in Python: There is no member named name.
This patch fixes the issue taking the module name from the 'struct
attribute'.
Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.
Change to remove the basepath prefix from all lines.
Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
-Wtype-limits is included in -Wextra which is added at W=1. It warns
(among other things) that 'comparison of an unsigned variable `< 0` is
always false. This causes noisy warnings, especially when used in
macros, hence it is more suitable for W=2.
Link: https://lore.kernel.org/lkml/CAHk-=wiKCXEWKJ9dWUimGbrVRo_N2RosESUw8E7m9AEtyZcu=w@mail.gmail.com/
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
strsep() is neither standard C nor POSIX and used outside
the kernel code here. Using it here requires that the
build host supports it out of the box which is e.g.
not true for a Darwin build host and using a cross-compiler.
This leads to:
scripts/mod/modpost.c:145:2: warning: implicit declaration of function 'strsep' [-Wimplicit-function-declaration]
return strsep(stringp, "\n");
^
and a segfault when running MODPOST.
See also: https://stackoverflow.com/a/7219504
So let's replace this by strchr() instead of using strsep().
It does not hurt kernel size or speed since this code is run
on the build host.
Fixes: ac5100f5432967 ("modpost: add read_text_file() and get_line() helpers")
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes frin Masahiro Yamada:
- fix various bugs in xconfig
- fix some issues in cross-compilation using Clang
- fix documentation
* tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
.gitignore: Do not track `defconfig` from `make savedefconfig`
kbuild: make Clang build userprogs for target architecture
kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang
kconfig: qconf: parse newer types at debug info
kconfig: qconf: navigate menus on hyperlinks
kconfig: qconf: don't show goback button on splitMode
kconfig: qconf: simplify the goBack() logic
kconfig: qconf: re-implement setSelected()
kconfig: qconf: make debug links work again
kconfig: qconf: make search fully work again on split mode
kconfig: qconf: cleanup includes
docs: kbuild: fix ReST formatting
gcc-plugins: fix gcc-plugins directory path in documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clock: imx: Fix e-mail address
dt-bindings: thermal: k3: Fix the reg property
dt-bindings: thermal: Remove soc unit address
dt-bindings: display: arm: versatile: Pass the sysreg unit name
dt-bindings: usb: aspeed: Remove the leading zeroes
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
dt-bindings: mailbox: zynqmp_ipi: fix unit address
dt-bindings: bus: uniphier-system-bus: fix warning in example
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
doc: devicetree: bindings: fix spelling mistake
docs: dt: minor adjustments at writing-schema.rst
dt: fix reference to olpc,xo1.75-ec.txt
dt: Fix broken references to renamed docs
dt: fix broken links due to txt->yaml renames
dt: update a reference for reneases pcar file renamed to yaml
|
|
There are 3 types that are not parsed by the debug info logic.
Add support for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Instead of just changing the helper window to show a
dependency, also navigate to it at the config and menu
widgets.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
the goback button does nothing on splitMode. So, why display
it?
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The goBack() logic is used only for the configList, as
it only makes sense on singleMode. So, let's simplify the
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The default implementation for setSelected() at QTreeWidgetItem
allows multiple items to be selected.
Well, this should never be possible for the configItem lists.
So, implement a function that will automatically clean any
previous selection. This simplifies the logic somewhat, while
making the selection logic to be applied atomically, avoiding
future issues on that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The Qt5 conversion broke support for debug info links.
Restore the behaviour added by changeset
ab45d190fd4a ("kconfig: create links in info window").
The original approach was to pass a pointer for a data struct
via an <a href>. That doesn't sound a good idea, as, if something
gets wrong, the app could crash. So, instead, pass the name of
the symbol, and validate such symbol at the hyperlink handling
logic.
Link: https://lore.kernel.org/lkml/20200628125421.12458086@coco.lan/
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When the search dialog box finds symbols/menus that match
the search criteria, it presents all results at the window.
Clicking on a search result should make qconf to navigate
to the selected item. This works on singleMode and on
fullMode, but on splitMode, the navigation is broken.
This was partially caused by an incomplete Qt5 conversion
and by the followup patches that restored the original
behavior.
When qconf is on split mode, it has to update both the
config and the menu views. Right now, such logic is broken,
as it is not seeking using the right structures.
On qconf, the screen is split into 3 parts:
+------------+-------+
| | |
| Config | Menu |
| | |
+------------+-------+
| |
| ConfigInfo |
| |
+--------------------+
On singleMode and on fullMode, the menuView is hidden, and search
updates only the configList (which controls the ConfigView).
On SplitMode, the search logic should detect if the variable is a
leaf or not. If it is a leaf, it should be presented at the menuView,
and both configList and menuList should be updated. Otherwise, just
the configList should be updated.
Link: https://lore.kernel.org/lkml/a98b0f0ebe0c23615a76f1d23f25fd0c84835e6b.camel@redhat.com/
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The usage of c-like include is deprecated on modern Qt
versions. Use the c++ style includes.
While here, remove uneeded and redundant ones, sorting
them on alphabetic order.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The
interrupt_provider check is noisy, so turn it off for now.
This adds the following commits from upstream:
9d7888cbf19c dtc: Consider one-character strings as strings
8259d59f59de checks: Improve i2c reg property checking
fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
2478b1652c8d libfdt: add extern "C" for C++
f68bfc2668b2 libfdt: trivial typo fix
7be250b4d059 libfdt: Correct condition for reordering blocks
81e0919a3e21 checks: Add interrupt provider test
85e5d839847a Makefile: when building libfdt only, do not add unneeded deps
b28464a550c5 Fix some potential unaligned accesses in dtc
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU-vs-KCSAN fixes from Borislav Petkov:
"A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions.
In preparation for that commit, it also has another commit that makes
these "arch_" atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors"
* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Fixup noinstr warnings
locking/atomics: Provide the arch_atomic_ interface to generic code
|
|
Fix typos "plgins" -> "plugins".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
|
|
Architectures with instrumented (KASAN/KCSAN) atomic operations
natively provide arch_atomic_ variants that are not instrumented.
It turns out that some generic code also requires arch_atomic_ in
order to avoid instrumentation, so provide the arch_atomic_ interface
as a direct map into the regular atomic_ interface for
non-instrumented architectures.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable
compile option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: watch_queue: build sample program for target architecture
Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
scripts: Fix typo in headers_install.sh
kconfig: unify cc-option and as-option
kbuild: improve cc-option to clean up all temporary files
Makefile: Improve compressed debug info support detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
|
|
This patch fixes a spelling typo in scripts/headers_install.sh
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cc-option and as-option are almost the same; both pass the flag to
$(CC). The main difference is the cc-option stops before the assemble
stage (-S option) whereas as-option stops after (-c option).
I chose -S because it is slightly faster, but $(cc-option,-gz=zlib)
returns a wrong result (https://lkml.org/lkml/2020/6/9/1529).
It has been fixed by commit 7b16994437c7 ("Makefile: Improve compressed
debug info support detection"), but the assembler should always be
invoked for more reliable compiler option tests.
However, you cannot simply replace -S with -c because the following
code in lib/Kconfig.debug would break:
depends on $(cc-option,-gsplit-dwarf)
The combination of -c and -gsplit-dwarf does not accept /dev/null as
output.
$ cat /dev/null | gcc -gsplit-dwarf -S -x c - -o /dev/null
$ echo $?
0
$ cat /dev/null | gcc -gsplit-dwarf -c -x c - -o /dev/null
objcopy: Warning: '/dev/null' is not an ordinary file
$ echo $?
1
$ cat /dev/null | gcc -gsplit-dwarf -c -x c - -o tmp.o
$ echo $?
0
There is another flag that creates an separate file based on the
object file path:
$ cat /dev/null | gcc -ftest-coverage -c -x c - -o /dev/null
<stdin>:1: error: cannot open /dev/null.gcno
So, we cannot use /dev/null to sink the output.
Align the cc-option implementation with scripts/Kbuild.include.
With -c option used in cc-option, as-option is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
|
|
When compiling a kernel with Clang and LTO, we need to run
recordmcount on vmlinux.o with a large number of sections, which
currently fails as the program doesn't understand extended
section indexes. This change adds support for processing binaries
with >64k sections.
Link: https://lkml.kernel.org/r/20200424193046.160744-1-samitolvanen@google.com
Link: https://lore.kernel.org/lkml/CAK7LNARbZhoaA=Nnuw0=gBrkuKbr_4Ng_Ei57uafujZf7Xazgw@mail.gmail.com/
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When cc-option and friends evaluate compiler flags, the temporary file
$$TMP is created as an output object, and automatically cleaned up.
The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process
ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the
escape sequence of $$).
Such garbage files are cleaned up in most cases, but some compiler flags
create additional output files.
For example, -gsplit-dwarf creates a .dwo file.
When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files
left in the top of build directories. You may not notice them unless you
do 'ls -a', but the garbage files will increase every time you run 'make'.
This commit changes the temporary object path to .tmp_<pid>/tmp, and
removes .tmp_<pid> directory when exiting. Separate build artifacts such
as *.dwo will be cleaned up all together because their file paths are
usually determined based on the base name of the object.
Another example is -ftest-coverage, which outputs the coverage data into
<base-name-of-object>.gcno
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When a user tries to parse a symbol located inside a module he must have
modpath set. Otherwise, decode_stacktrace won't be able to parse the
symbol correctly.
Right now the failure is silent and easily missed by the user. What's
worse is that by the time the user realizes what happened (or someone on
LKML asks him to add the modpath and re-run), he might have already got
rid of the vmlinux/modules.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|