Age | Commit message (Collapse) | Author |
|
commit cf3e204a1ca5442190018a317d9ec181b4639bd6 upstream.
info->key.tp_src and tp_dst are __be16, when using nla_put_be16()
to dump them, htons() is not needed, so remove it in this patch.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 369537c97024dca99303a8d4d6ab38b4f54d3909 upstream.
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be
zero for SMCD.
Fixes: c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a20773beeeeadec41477a5ba872175b778ff752 upstream.
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().
CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes: 4f520900522f ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 06f5201c6392f998a49ca9c9173e2930c8eb51d8 ]
Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit afecdb376bd81d7e16578f0cfe82a1aec7ae18f3 ]
When splitting an RTA_MULTIPATH request into multiple routes and adding the
second and later components, we must not simply remove NLM_F_REPLACE but
instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink
message was malformed.
For example,
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \
nexthop via fe80::30:2 dev dummy0
results in the following warnings:
[ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE
[ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route
This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to
what it would get if the multipath route had been added in multiple netlink
operations:
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0
ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0
Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e404b8c7cfb31654c9024d497cec58a501501692 ]
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 245709ec8be89af46ea7ef0444c9c80913999d99 ]
When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.
However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.
This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.
Thanks Hangbin for reporting this issue by the fuzz testing.
v1->v2:
- improve the comment in the code as Marcelo's suggestion.
Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8a9093c79863b58cc2f9874d7ae788f0d622a596 ]
tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.
Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.
Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 540e585a79e9d643ede077b73bcc7aa2d7b4d919 ]
In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to
allow legacy software to deal with routing table numbers >= 256, but the
same change to FIB rule queries was overlooked.
Signed-off-by: Jethro Beekman <jethro@fortanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ea75080110a4c1fa011b0a73cb8f42227143ee3e ]
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute.
As a result, for strictly validated commands, it's assumed to not be
supported.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfb7bac3a8f47100ebe7961bd14e924c96e21ca7 ]
When preparing ethtool drvinfo, check if wiphy driver is defined
before dereferencing it. Driver may not exist, e.g. if wiphy is
attached to a virtual platform device.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200203105644.28875-1-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a04564c99bb4a92f805a58e56b2d22cc4978f152 ]
We only use the parsing CRC for checking if a beacon changed,
and elements with an ID > 63 cannot be represented in the
filter. Thus, like we did before with WMM and Cisco vendor
elements, just statically add these forgotten items to the
CRC:
- WLAN_EID_VHT_OPERATION
- WLAN_EID_OPMODE_NOTIF
I guess that in most cases when VHT/HE operation change, the HT
operation also changed, and so the change was picked up, but we
did notice that pure operating mode notification changes were
ignored.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi
[restrict to VHT for the mac80211 branch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 963485d436ccc2810177a7b08af22336ec2af67b upstream.
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock. RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.
To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred. This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.
Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.
Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.
Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.
Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept")
Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com
Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d0015a7ab76b8b1e89a3e5f5710a6e5103f2dd5 upstream.
The user-specified hashtable size is unbound, this could
easily lead to an OOM or a hung task as we hold the global
mutex while allocating and initializing the new hashtable.
Add a max value to cap both cfg->size and cfg->max, as
suggested by Florian.
Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0a29275b6300f39f78a87f2038bbfe5bdbaeca47 ]
A negative value should be returned if map->map_type is invalid
although that is impossible now, but if we run into such situation
in future, then xdpbuff could be leaked.
Daniel Borkmann suggested:
-EBADRQC should be returned to stay consistent with generic XDP
for the tracepoint output and not to be confused with -EOPNOTSUPP
from other locations like dev_map_enqueue() when ndo_xdp_xmit is
missing and such.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1578618277-18085-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0705f95c332081036d85f26691e9d3cd7d901c31 ]
ERSPAN_VERSION is an attribute parsed in kernel side, nla_policy
type should be added for it, like other attributes.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2debf0852c4d66ba1a8bde12869b196094c70a7 ]
unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of
netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry
to fl_policy.
Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1afa3cc90f8fb745c777884d79eaa1001d6927a6 ]
unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size
of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper
entry to mall_policy.
Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 04fb91243a853dbde216d829c79d9632e52aa8d9 ]
Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.
Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 457fed775c97ac2c0cd1672aaf2ff2c8a6235e87 ]
As nlmsg_put() does not clear the memory that is reserved,
it this the caller responsability to make sure all of this
memory will be written, in order to not reveal prior content.
While we are at it, we can provide the socket cookie even
if clsock is not set.
syzbot reported :
BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline]
BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
__swab32p include/uapi/linux/swab.h:179 [inline]
__be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128
kmalloc_large_node_hook mm/slub.c:1406 [inline]
kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841
__kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224
__netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:233 [inline]
smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242
sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
kernel_sendmsg+0x433/0x440 net/socket.c:679
sock_no_sendpage+0x235/0x300 net/core/sock.c:2740
kernel_sendpage net/socket.c:3776 [inline]
sock_sendpage+0x1e1/0x2c0 net/socket.c:937
pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x539/0xed0 fs/splice.c:636
splice_from_pipe fs/splice.c:671 [inline]
generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844
do_splice_from fs/splice.c:863 [inline]
do_splice fs/splice.c:1170 [inline]
__do_sys_splice fs/splice.c:1447 [inline]
__se_sys_splice+0x2380/0x3350 fs/splice.c:1427
__x64_sys_splice+0x6e/0x90 fs/splice.c:1427
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ad1e03b2b3d4430baaa109b77bc308dc73050de3 ]
The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.
This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.
This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.
Reproducer Python script (requires BCC and Scapy):
from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex
SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable
def client():
time.sleep(2)
# Sniffing on the sender causes skb_cloned() to be set
s = AsyncSniffer()
s.start()
for p in range(10):
sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
verbose=False)
time.sleep(0.1)
s.stop()
return 0
def server(mode):
prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
func = prog.load_func("dummy_drop", BPF.XDP)
prog.attach_xdp("a_to_b", func, mode)
time.sleep(1)
s = sniff(iface="a_to_b", count=10, timeout=15)
if len(s):
print(f"Got {len(s)} packets - should have gotten 0")
return 1
else:
print("Got no packets - as expected")
return 0
if len(sys.argv) < 2:
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
if sys.argv[1] == "client":
sys.exit(client())
elif sys.argv[1] == "server":
mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
sys.exit(server(mode))
else:
try:
mode = sys.argv[1]
if mode not in ('skb', 'drv'):
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
print(f"Running in {mode} mode")
for cmd in [
'ip netns add netns_a',
'ip netns add netns_b',
'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
# Disable ipv6 to make sure there's no address autoconf traffic
'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
'ip -n netns_a link set dev a_to_b up',
'ip -n netns_b link set dev b_to_a up']:
subprocess.check_call(shlex.split(cmd))
server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))
client.wait()
server.wait()
sys.exit(server.returncode)
finally:
subprocess.run(shlex.split("ip netns delete netns_a"))
subprocess.run(shlex.split("ip netns delete netns_b"))
Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <shoracek@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c742c59e1fbd022b64d91aa9a0092b3a699d653c ]
Currently, hv_sock restricts the port the guest socket can accept
connections on. hv_sock divides the socket port namespace into two parts
for server side (listening socket), 0-0x7FFFFFFF & 0x80000000-0xFFFFFFFF
(there are no restrictions on client port namespace). The first part
(0-0x7FFFFFFF) is reserved for sockets where connections can be accepted.
The second part (0x80000000-0xFFFFFFFF) is reserved for allocating ports
for the peer (host) socket, once a connection is accepted.
This reservation of the port namespace is specific to hv_sock and not
known by the generic vsock library (ex: af_vsock). This is problematic
because auto-binds/ephemeral ports are handled by the generic vsock
library and it has no knowledge of this port reservation and could
allocate a port that is not compatible with hv_sock (and legitimately so).
The issue hasn't surfaced so far because the auto-bind code of vsock
(__vsock_bind_stream) prior to the change 'VSOCK: bind to random port for
VMADDR_PORT_ANY' would start walking up from LAST_RESERVED_PORT (1023) and
start assigning ports. That will take a large number of iterations to hit
0x7FFFFFFF. But, after the above change to randomize port selection, the
issue has started coming up more frequently.
There has really been no good reason to have this port reservation logic
in hv_sock from the get go. Reserving a local port for peer ports is not
how things are handled generally. Peer ports should reflect the peer port.
This fixes the issue by lifting the port reservation, and also returns the
right peer port. Since the code converts the GUID to the peer port (by
using the first 4 bytes), there is a possibility of conflicts, but that
seems like a reasonable risk to take, given this is limited to vsock and
that only applies to all local sockets.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b39a934ec72fa2b5a74123891f25273a38378b90 ]
The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls. This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.
In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.
KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).
Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.
Fixes: 5273a191dca6 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52b5ae501c045010aeeb1d5ac0373ff161a88291 ]
Jakub noticed there is a potential resource leak in
tcindex_set_parms(): when tcindex_filter_result_init() fails
and it jumps to 'errout1' which doesn't release the memory
and resources allocated by tcindex_alloc_perfect_hash().
We should just jump to 'errout_alloc' which calls
tcindex_free_perfect_hash().
Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d96208c30f84d6edf9ab4fac813306ac0d20c10 upstream.
When upcalling gssproxy, cache_head.expiry_time is set as a
timeval, not seconds since boot. As such, RPC cache expiry
logic will not clean expired objects created under
auth.rpcsec.context cache.
This has proven to cause kernel memory leaks on field. Using
64 bit variants of getboottime/timespec
Expiration times have worked this way since 2010's c5b29f885afe "sunrpc:
use seconds since boot in expiry cache". The gssproxy code introduced
in 2012 added gss_proxy_save_rsc and introduced the bug. That's a while
for this to lurk, but it required a bit of an extreme case to make it
obvious.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 030d794bf498 "SUNRPC: Use gssproxy upcall for server..."
Tested-By: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5273a191dca65a675dc0bcf3909e59c6933e2831 ]
When a call is disconnected, the connection pointer from the call is
cleared to make sure it isn't used again and to prevent further attempted
transmission for the call. Unfortunately, there might be a daemon trying
to use it at the same time to transmit a packet.
Fix this by keeping call->conn set, but setting a flag on the call to
indicate disconnection instead.
Remove also the bits in the transmission functions where the conn pointer is
checked and a ref taken under spinlock as this is now redundant.
Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 04d36d748fac349b068ef621611f454010054c58 ]
The introduction of a split between the reference count on rxrpc_local
objects and the usage count didn't quite go far enough. A number of kernel
work items need to make use of the socket to perform transmission. These
also need to get an active count on the local object to prevent the socket
from being closed.
Fix this by getting the active count in those places.
Also split out the raw active count get/put functions as these places tend
to hold refs on the rxrpc_local object already, so getting and putting an
extra object ref is just a waste of time.
The problem can lead to symptoms like:
BUG: kernel NULL pointer dereference, address: 0000000000000018
..
CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51
...
RIP: 0010:selinux_socket_sendmsg+0x5/0x13
...
Call Trace:
security_socket_sendmsg+0x2c/0x3e
sock_sendmsg+0x1a/0x46
rxrpc_send_keepalive+0x131/0x1ae
rxrpc_peer_keepalive_worker+0x219/0x34b
process_one_work+0x18e/0x271
worker_thread+0x1a3/0x247
kthread+0xe6/0xeb
ret_from_fork+0x1f/0x30
Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f71dbf2fb28489a79bde0dca1c8adfb9cdb20a6b ]
In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence
number of the packet is immediately following the hard-ack point at the end
of the function. However, this isn't sufficient, since the recvmsg side
may have been advancing the window and then overrun the position in which
we're adding - at which point rx_hard_ack >= seq0 and no notification is
generated.
Fix this by always generating a notification at the end of the input
function.
Without this, a long call may stall, possibly indefinitely.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fac20b9e738523fc884ee3ea5be360a321cd8bad ]
Fix rxrpc_put_local() to not access local->debug_id after calling
atomic_dec_return() as, unless that returned n==0, we no longer have the
right to access the object.
Fixes: 06d9532fa6b3 ("rxrpc: Fix read-after-free in rxrpc_queue_local()")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 784f8344de750a41344f4bbbebb8507a730fc99c ]
tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect().
tcp_disconnect() is rarely used, but it is worth fixing it.
Fixes: 2efd055c53c0 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit db7ffee6f3eb3683cdcaeddecc0a630a14546fe3 ]
tp->data_segs_in and tp->data_segs_out need to be cleared
in tcp_disconnect().
tcp_disconnect() is rarely used, but it is worth fixing it.
Fixes: a44d6eacdaf5 ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2fbdd56251b5c62f96589f39eded277260de7267 ]
tp->delivered needs to be cleared in tcp_disconnect().
tcp_disconnect() is rarely used, but it is worth fixing it.
Fixes: ddf1af6fa00e ("tcp: new delivery accounting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c13c48c00a6bc1febc73902505bdec0967bd7095 ]
total_retrans needs to be cleared in tcp_disconnect().
tcp_disconnect() is rarely used, but it is worth fixing it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 599be01ee567b61f4471ee8078870847d0a11e8e ]
As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash
to compute the size of memory allocation, but cp->hash is
set again after the allocation, this caused an out-of-bound
access.
So we have to move all cp->hash initialization and computation
before the memory allocation. Move cp->mask and cp->shift together
as cp->hash may need them for computation too.
Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com
Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2b5b8251bc9fe2f9118411f037862ee17cf81e97 ]
hsr_port_get_rcu() can return NULL, so we need to be careful.
general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline]
RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44
Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f
RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33
RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000
RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c
R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e
R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8
FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31
__netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099
__netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196
__netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312
process_backlog+0x206/0x750 net/core/dev.c:6144
napi_poll net/core/dev.c:6582 [inline]
net_rx_action+0x508/0x1120 net/core/dev.c:6650
__do_softirq+0x262/0x98c kernel/softirq.c:292
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
</IRQ>
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0d0d9a388a858e271bb70e71e99e7fe2a6fd6f64 ]
In the past it was possible to create multiple L2TPv3 sessions with the
same session id as long as the sessions belonged to different tunnels.
The resulting sessions had issues when used with IP encapsulated tunnels,
but worked fine with UDP encapsulated ones. Some applications began to
rely on this behaviour to avoid having to negotiate unique session ids.
Some time ago a change was made to require session ids to be unique across
all tunnels, breaking the applications making use of this "feature".
This change relaxes the duplicate session id check to allow duplicates
if both of the colliding sessions belong to UDP encapsulated tunnels.
Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation")
Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cb3c0e6bdf64d0d124e94ce43cbe4ccbb9b37f51 ]
NLA_BINARY can be confusing, since .len value represents
the max size of the blob.
cls_rsvp really wants user space to provide long enough data
for TCA_RSVP_DST and TCA_RSVP_SRC attributes.
BUG: KMSAN: uninit-value in rsvp_get net/sched/cls_rsvp.h:258 [inline]
BUG: KMSAN: uninit-value in gen_handle net/sched/cls_rsvp.h:402 [inline]
BUG: KMSAN: uninit-value in rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572
CPU: 1 PID: 13228 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
rsvp_get net/sched/cls_rsvp.h:258 [inline]
gen_handle net/sched/cls_rsvp.h:402 [inline]
rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572
tc_new_tfilter+0x31fe/0x5010 net/sched/cls_api.c:2104
rtnetlink_rcv_msg+0xcb7/0x1570 net/core/rtnetlink.c:5415
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
___sys_sendmsg net/socket.c:2384 [inline]
__sys_sendmsg+0x451/0x5f0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45b349
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f269d43dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f269d43e6d4 RCX: 000000000045b349
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000009c2 R14: 00000000004cb338 R15: 000000000075bfd4
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
slab_alloc_node mm/slub.c:2774 [inline]
__kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
___sys_sendmsg net/socket.c:2384 [inline]
__sys_sendmsg+0x451/0x5f0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 6fa8c0144b77 ("[NET_SCHED]: Use nla_policy for attribute validation in classifiers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 189c9b1e94539b11c80636bc13e9cf47529e7bba ]
skb->csum is updated incorrectly, when manipulation for
NF_NAT_MANIP_SRC\DST is done on IPV6 packet.
Fix:
There is no need to update skb->csum in inet_proto_csum_replace16(),
because update in two fields a.) IPv6 src/dst address and b.) L4 header
checksum cancels each other for skb->csum calculation. Whereas
inet_proto_csum_replace4 function needs to update skb->csum, because
update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum
and c.) L4 header checksum results in same diff as L4 Header checksum
for skb->csum calculation.
[ pablo@netfilter.org: a few comestic documentation edits ]
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Signed-off-by: Andy Stracner <astracner@linkedin.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8aaea2b0428b6aad7c7e22d3fddc31a78bb1d724 ]
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f042365dbffea98fb8148c98c700402e8d099f02 ]
With an ebpf program that redirects packets through a xfrm interface,
packets are dropped because no dst is attached to skb.
This could also be reproduced with an AF_PACKET socket, with the following
python script (xfrm1 is a xfrm interface):
import socket
send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
# scapy
# p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
# raw(p)
req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
send_s.sendto(req, ('xfrm1', 0x800, 0, 0))
It was also not possible to send an ip packet through an AF_PACKET socket
because a LL header was expected. Let's remove those LL header constraints.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95224166a9032ff5d08fca633d37113078ce7d01 ]
With an ebpf program that redirects packets through a vti[6] interface,
the packets are dropped because no dst is attached.
This could also be reproduced with an AF_PACKET socket, with the following
python script (vti1 is an ip_vti interface):
import socket
send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
# scapy
# p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
# raw(p)
req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
send_s.sendto(req, ('vti1', 0x800, 0, 0))
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ec22d7c6c69146180577f3ad5fdf504beeaee62 ]
Fixes: af308b94a2a4a5 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e16119655c9e6c4aa5767cd971baa9c491f41b13 ]
After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3,
the wext code produces a bogus warning:
In function 'iw_handler_get_iwstats',
inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9,
inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10,
inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8,
inlined from 'wext_handle_ioctl':
net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull]
memcpy(extra, stats, sizeof(struct iw_statistics));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/string.h:5,
net/wireless/wext-core.c: In function 'wext_handle_ioctl':
arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here
The problem is that ioctl_standard_call() sometimes calls the handler
with a NULL argument that would cause a problem for iw_handler_get_iwstats.
However, iw_handler_get_iwstats never actually gets called that way.
Marking that function as noinline avoids the warning and leads
to slightly smaller object code as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f601265215a421f425ba3a4850a35861d024643 ]
TKIP replay protection was skipped for the very first frame received
after a new key is configured. While this is potentially needed to avoid
dropping a frame in some cases, this does leave a window for replay
attacks with group-addressed frames at the station side. Any earlier
frame sent by the AP using the same key would be accepted as a valid
frame and the internal RSC would then be updated to the TSC from that
frame. This would allow multiple previously transmitted group-addressed
frames to be replayed until the next valid new group-addressed frame
from the AP is received by the station.
Fix this by limiting the no-replay-protection exception to apply only
for the case where TSC=0, i.e., when this is for the very first frame
protected using the new key, and the local RSC had not been set to a
higher value when configuring the key (which may happen with GTK).
Signed-off-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26ec17a1dc5ecdd8d91aba63ead6f8b5ad5dea0d ]
In case a radar event of CAC_FINISHED or RADAR_DETECTED
happens during another phy is during CAC we might need
to cancel that CAC.
If we got a radar in a channel that another phy is now
doing CAC on then the CAC should be canceled there.
If, for example, 2 phys doing CAC on the same channels,
or on comptable channels, once on of them will finish his
CAC the other might need to cancel his CAC, since it is no
longer relevant.
To fix that the commit adds an callback and implement it in
mac80211 to end CAC.
This commit also adds a call to said callback if after a radar
event we see the CAC is no longer relevant
Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com
[slightly reformat/reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4b9d655e445a8be0bff624aedea190606b5ebbc ]
Commit e33e2241e272 ("Revert "cfg80211: Use 5MHz bandwidth by
default when checking usable channels"") fixed a broken
regulatory (leaving channel 12 open for AP where not permitted).
Apply a similar fix to custom regulatory domain processing.
Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com
[reword commit message, fix coding style, add a comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02a614499600af836137c3fbc4404cd96365fff2 ]
The following warning is triggered every time an unestablished mesh peer
gets dumped. Checks if a peer link is established before retrieving the
airtime link metric.
[ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345
airtime_link_metric_get+0xa2/0xb0 [mac80211]
[ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3
[ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211]
[ 9563.022838] Call Trace:
[ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211]
[ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211]
[ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211]
[ 9563.023120] netlink_dump+0x17b/0x370
[ 9563.023130] netlink_recvmsg+0x2a4/0x480
[ 9563.023140] ____sys_recvmsg+0xa6/0x160
[ 9563.023154] ___sys_recvmsg+0x93/0xe0
[ 9563.023169] __sys_recvmsg+0x7e/0xd0
[ 9563.023210] do_syscall_64+0x4e/0x140
[ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 11eb85ec42dc8c7a7ec519b90ccf2eeae9409de8 upstream.
Syzbot managed to trigger a use after free "KASAN: use-after-free Write
in hci_sock_bind". I have reviewed the code manually and one possibly
cause I have found is that we are not holding lock_sock(sk) when we do
the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind
and the release are racing against each other which results in this use
after free.
Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2e24cd755552350b94a7617617c6877b8cbcb701 ]
The current implementations of ops->bind_class() are merely
searching for classid and updating class in the struct tcf_result,
without invoking either of cl_ops->bind_tcf() or
cl_ops->unbind_tcf(). This breaks the design of them as qdisc's
like cbq use them to count filters too. This is why syzbot triggered
the warning in cbq_destroy_class().
In order to fix this, we have to call cl_ops->bind_tcf() and
cl_ops->unbind_tcf() like the filter binding path. This patch does
so by refactoring out two helper functions __tcf_bind_filter()
and __tcf_unbind_filter(), which are lockless and accept a Qdisc
pointer, then teaching each implementation to call them correctly.
Note, we merely pass the Qdisc pointer as an opaque pointer to
each filter, they only need to pass it down to the helper
functions without understanding it at all.
Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class")
Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 55cd9f67f1e45de8517cdaab985fb8e56c0bc1d8 ]
It is possible for malicious userspace to set TCF_EM_SIMPLE bit
even for matches that should not have this bit set.
This can fool two places using tcf_em_is_simple()
1) tcf_em_tree_destroy() -> memory leak of em->data
if ops->destroy() is NULL
2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes
of a kernel pointer.
BUG: memory leak
unreferenced object 0xffff888121850a40 (size 32):
comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s)
hex dump (first 32 bytes):
00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline]
[<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline]
[<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline]
[<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671
[<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127
[<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline]
[<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32
[<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline]
[<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline]
[<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300
[<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline]
[<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219
[<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104
[<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415
[<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
[<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
[<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
[<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline]
[<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659
[<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
[<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
[<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
[<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline]
[<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline]
[<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|