summaryrefslogtreecommitdiffstats
path: root/net/xfrm
AgeCommit message (Collapse)Author
2020-04-02xfrm: policy: Fix doulbe free in xfrm_policy_timerYueHaibing
commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream. After xfrm_add_policy add a policy, its ref is 2, then xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_policy_destroy is called twice, which may leads to double free. Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0 Fix this by use write_lock_bh in xfrm_policy_kill. Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquireXin Long
commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream. Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz: BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430 Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650 Call Trace: dump_stack+0xe8/0x16e print_address_description.cold.3+0x9/0x23b kasan_report.cold.4+0x64/0x95 memcpy+0x1f/0x50 selinux_xfrm_alloc_user+0x237/0x430 security_xfrm_policy_alloc+0x5c/0xb0 xfrm_policy_construct+0x2b1/0x650 xfrm_add_acquire+0x21d/0xa10 xfrm_user_rcv_msg+0x431/0x6f0 netlink_rcv_skb+0x15a/0x410 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x50e/0x6a0 netlink_sendmsg+0x8ae/0xd40 sock_sendmsg+0x133/0x170 ___sys_sendmsg+0x834/0x9a0 __sys_sendmsg+0x100/0x1e0 do_syscall_64+0xe5/0x660 entry_SYSCALL_64_after_hwframe+0x6a/0xdf So fix it by adding the missing verify_sec_ctx_len check there. Fixes: 980ebd25794f ("[IPSEC]: Sync series - acquire insert") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02xfrm: fix uctx len check in verify_sec_ctx_lenXin Long
commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream. It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later. This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt). Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02xfrm: handle NETDEV_UNREGISTER for xfrm deviceRaed Salem
commit 03891f820c2117b19e80b370281eb924a09cf79f upstream. This patch to handle the asynchronous unregister device event so the device IPsec offload resources could be cleanly released. Fixes: e4db5b61c572 ("xfrm: policy: remove pcpu policy cache") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05xfrm: interface: do not confirm neighbor when do pmtu updateXu Wang
[ Upstream commit 8aaea2b0428b6aad7c7e22d3fddc31a78bb1d724 ] When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05xfrm interface: fix packet tx through bpf_redirect()Nicolas Dichtel
[ Upstream commit f042365dbffea98fb8148c98c700402e8d099f02 ] With an ebpf program that redirects packets through a xfrm interface, packets are dropped because no dst is attached to skb. This could also be reproduced with an AF_PACKET socket, with the following python script (xfrm1 is a xfrm interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('xfrm1', 0x800, 0, 0)) It was also not possible to send an ip packet through an AF_PACKET socket because a LL header was expected. Let's remove those LL header constraints. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27xfrm interface: ifname may be wrong in logsNicolas Dichtel
[ Upstream commit e0aaa332e6a97dae57ad59cdb19e21f83c3d081c ] The ifname is copied when the interface is created, but is never updated later. In fact, this property is used only in one error message, where the netdevice pointer is available, thus let's use it. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-13xfrm interface: fix management of phydevNicolas Dichtel
commit 22d6552f827ef76ade3edf6bbb3f05048a0a7d8b upstream. With the current implementation, phydev cannot be removed: $ ip link add dummy type dummy $ ip link add xfrm1 type xfrm dev dummy if_id 1 $ ip l d dummy kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1 Manage it like in ip tunnels, ie just keep the ifindex. Not that the side effect, is that the phydev is now optional. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13xfrm interface: fix list corruption for x-netnsNicolas Dichtel
commit c5d1030f23002430c2a336b2b629b9d6f72b3564 upstream. dev_net(dev) is the netns of the device and xi->net is the link netns, where the device has been linked. changelink() must operate in the link netns to avoid a corruption of the xfrm lists. Note that xi->net and dev_net(xi->physdev) are always the same. Before the patch, the xfrmi lists may be corrupted and can later trigger a kernel panic. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13xfrm interface: avoid corruption on changelinkNicolas Dichtel
commit e9e7e85d75f3731079ffd77c1a66f037aef04fe7 upstream. The new parameters must not be stored in the netdev_priv() before validation, it may corrupt the interface. Note also that if data is NULL, only a memset() is done. $ ip link add xfrm1 type xfrm dev lo if_id 1 $ ip link add xfrm2 type xfrm dev lo if_id 2 $ ip link set xfrm1 type xfrm dev lo if_id 2 RTNETLINK answers: File exists $ ip -d link list dev xfrm1 5: xfrm1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 minmtu 68 maxmtu 1500 xfrm if_id 0x2 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 => "if_id 0x2" Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13xfrm interface: fix memory leak on creationNicolas Dichtel
commit 56c5ee1a5823e9cf5288b84ae6364cb4112f8225 upstream. The following commands produce a backtrace and return an error but the xfrm interface is created (in the wrong netns): $ ip netns add foo $ ip netns add bar $ ip -n foo netns set bar 0 $ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23 RTNETLINK answers: Invalid argument $ ip -n bar link ls xfrmi0 2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 Here is the backtrace: [ 79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1 [ 79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$ eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy [ 79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106 [ 79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1 [ 79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66 [ 79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246 [ 79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710 [ 79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710 [ 79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0 [ 79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770 [ 79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea [ 79.893557] FS: 00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 [ 79.894581] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0 [ 79.896137] Call Trace: [ 79.896464] unregister_netdevice_many+0x12/0x6c [ 79.896998] __rtnl_newlink+0x6e2/0x73b [ 79.897446] ? __kmalloc_node_track_caller+0x15e/0x185 [ 79.898039] ? pskb_expand_head+0x5f/0x1fe [ 79.898556] ? stack_access_ok+0xd/0x2c [ 79.899009] ? deref_stack_reg+0x12/0x20 [ 79.899462] ? stack_access_ok+0xd/0x2c [ 79.899927] ? stack_access_ok+0xd/0x2c [ 79.900404] ? __module_text_address+0x9/0x4f [ 79.900910] ? is_bpf_text_address+0x5/0xc [ 79.901390] ? kernel_text_address+0x67/0x7b [ 79.901884] ? __kernel_text_address+0x1a/0x25 [ 79.902397] ? unwind_get_return_address+0x12/0x23 [ 79.903122] ? __cmpxchg_double_slab.isra.37+0x46/0x77 [ 79.903772] rtnl_newlink+0x43/0x56 [ 79.904217] rtnetlink_rcv_msg+0x200/0x24c In fact, each time a xfrm interface was created, a netdev was allocated by __rtnl_newlink()/rtnl_create_link() and then another one by xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's why the previous commands produce a backtrace: dev_change_net_namespace() was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the first one). CC: Lorenzo Colitti <lorenzo@google.com> CC: Benedict Wong <benedictwong@google.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Shannon Nelson <shannon.nelson@oracle.com> CC: Antony Antony <antony@phenome.org> CC: Eyal Birger <eyal.birger@gmail.com> Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13xfrm: release device reference for invalid stateXiaodong Xu
[ Upstream commit 4944a4b1077f74d89073624bd286219d2fcbfce3 ] An ESP packet could be decrypted in async mode if the input handler for this packet returns -EINPROGRESS in xfrm_input(). At this moment the device reference in skb is held. Later xfrm_input() will be invoked again to resume the processing. If the transform state is still valid it would continue to release the device reference and there won't be a problem; however if the transform state is not valid when async resumption happens, the packet will be dropped while the device reference is still being held. When the device is deleted for some reason and the reference to this device is not properly released, the kernel will keep logging like: unregister_netdevice: waiting for ppp2 to become free. Usage count = 1 The issue is observed when running IPsec traffic over a PPPoE device based on a bridge interface. By terminating the PPPoE connection on the server end for multiple times, the PPPoE device on the client side will eventually get stuck on the above warning message. This patch will check the async mode first and continue to release device reference in async resumption, before it is dropped due to invalid state. v2: Do not assign address family from outer_mode in the transform if the state is invalid v3: Release device reference in the error path instead of jumping to resume Fixes: 4ce3dbe397d7b ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)") Signed-off-by: Xiaodong Xu <stid.smth@gmail.com> Reported-by: Bo Chen <chenborfc@163.com> Tested-by: Bo Chen <chenborfc@163.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05xfrm: Fix memleak on xfrm state destroySteffen Klassert
commit 86c6739eda7d2a03f2db30cbee67a5fb81afa8ba upstream. We leak the page that we use to create skb page fragments when destroying the xfrm_state. Fix this by dropping a page reference if a page was assigned to the xfrm_state. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: JD <jdtxs00@gmail.com> Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-24xfrm: use correct size to initialise sp->ovecLi RongQing
[ Upstream commit f1193e915748291fb205a908db33bd3debece6e2 ] This place should want to initialize array, not a element, so it should be sizeof(array) instead of sizeof(element) but now this array only has one element, so no error in this condition that XFRM_MAX_OFFLOAD_DEPTH is 1 Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26ipsec: select crypto ciphers for xfrm_algoArnd Bergmann
[ Upstream commit 597179b0ba550bd83fab1a9d57c42a9343c58514 ] kernelci.org reports failed builds on arc because of what looks like an old missed 'select' statement: net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs': xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash' I don't see this in randconfig builds on other architectures, but it's fairly clear we want to select the hash code for it, like we do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER is also required even though it has not popped up in build tests. Fixes: 17bc19702221 ("ipsec: Use skcipher and ahash when probing algorithms") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26xfrm: fix sa selector validationNicolas Dichtel
[ Upstream commit b8d6d0079757cbd1b69724cfd1c08e2171c68cee ] After commit b38ff4075a80, the following command does not work anymore: $ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \ mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \ 'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4 In fact, the selector is not mandatory, allow the user to provide an empty selector. Fixes: b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation") CC: Anirudh Gupta <anirudh.gupta@sophos.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26xfrm: Fix xfrm sel prefix length validationAnirudh Gupta
[ Upstream commit b38ff4075a80b4da5cb2202d7965332ca0efb213 ] Family of src/dst can be different from family of selector src/dst. Use xfrm selector family to validate address prefix length, while verifying new sa from userspace. Validated patch with this command: ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \ reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \ 0x1111016400000000000000000000000044440001 128 \ sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5 Fixes: 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25xfrm: Honor original L3 slave device in xfrmi policy lookupMartin Willi
[ Upstream commit 025c65e119bf58b610549ca359c9ecc5dee6a8d2 ] If an xfrmi is associated to a vrf layer 3 master device, xfrm_policy_check() fails after traffic decapsulation. The input interface is replaced by the layer 3 master device, and hence xfrmi_decode_session() can't match the xfrmi anymore to satisfy policy checking. Extend ingress xfrmi lookup to honor the original layer 3 slave device, allowing xfrm interfaces to operate within a vrf domain. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25xfrm: clean up xfrm protocol checksCong Wang
[ Upstream commit dbb2483b2a46fbaf833cfb5deb5ed9cace9c7399 ] In commit 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") I introduced a check for xfrm protocol, but according to Herbert IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so it should be removed from validate_tmpl(). And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific protocols, this is why xfrm_state_flush() could still miss IPPROTO_ROUTING, which leads that those entries are left in net->xfrm.state_all before exit net. Fix this by replacing IPSEC_PROTO_ANY with zero. This patch also extracts the check from validate_tmpl() to xfrm_id_proto_valid() and uses it in parse_ipsecrequest(). With this, no other protocols should be added into xfrm. Fixes: 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25xfrm: policy: Fix out-of-bound array accesses in __xfrm_policy_unlinkYueHaibing
[ Upstream commit b805d78d300bcf2c83d6df7da0c818b0fee41427 ] UBSAN report this: UBSAN: Undefined behaviour in net/xfrm/xfrm_policy.c:1289:24 index 6 is out of range for type 'unsigned int [6]' CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.162-514.55.6.9.x86_64+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 0000000000000000 1466cf39b41b23c9 ffff8801f6b07a58 ffffffff81cb35f4 0000000041b58ab3 ffffffff83230f9c ffffffff81cb34e0 ffff8801f6b07a80 ffff8801f6b07a20 1466cf39b41b23c9 ffffffff851706e0 ffff8801f6b07ae8 Call Trace: <IRQ> [<ffffffff81cb35f4>] __dump_stack lib/dump_stack.c:15 [inline] <IRQ> [<ffffffff81cb35f4>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51 [<ffffffff81d94225>] ubsan_epilogue+0x12/0x8f lib/ubsan.c:164 [<ffffffff81d954db>] __ubsan_handle_out_of_bounds+0x16e/0x1b2 lib/ubsan.c:382 [<ffffffff82a25acd>] __xfrm_policy_unlink+0x3dd/0x5b0 net/xfrm/xfrm_policy.c:1289 [<ffffffff82a2e572>] xfrm_policy_delete+0x52/0xb0 net/xfrm/xfrm_policy.c:1309 [<ffffffff82a3319b>] xfrm_policy_timer+0x30b/0x590 net/xfrm/xfrm_policy.c:243 [<ffffffff813d3927>] call_timer_fn+0x237/0x990 kernel/time/timer.c:1144 [<ffffffff813d8e7e>] __run_timers kernel/time/timer.c:1218 [inline] [<ffffffff813d8e7e>] run_timer_softirq+0x6ce/0xb80 kernel/time/timer.c:1401 [<ffffffff8120d6f9>] __do_softirq+0x299/0xe10 kernel/softirq.c:273 [<ffffffff8120e676>] invoke_softirq kernel/softirq.c:350 [inline] [<ffffffff8120e676>] irq_exit+0x216/0x2c0 kernel/softirq.c:391 [<ffffffff82c5edab>] exiting_irq arch/x86/include/asm/apic.h:652 [inline] [<ffffffff82c5edab>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926 [<ffffffff82c5c985>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:735 <EOI> [<ffffffff81188096>] ? native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:52 [<ffffffff810834d7>] arch_safe_halt arch/x86/include/asm/paravirt.h:111 [inline] [<ffffffff810834d7>] default_idle+0x27/0x430 arch/x86/kernel/process.c:446 [<ffffffff81085f05>] arch_cpu_idle+0x15/0x20 arch/x86/kernel/process.c:437 [<ffffffff8132abc3>] default_idle_call+0x53/0x90 kernel/sched/idle.c:92 [<ffffffff8132b32d>] cpuidle_idle_call kernel/sched/idle.c:156 [inline] [<ffffffff8132b32d>] cpu_idle_loop kernel/sched/idle.c:251 [inline] [<ffffffff8132b32d>] cpu_startup_entry+0x60d/0x9a0 kernel/sched/idle.c:299 [<ffffffff8113e119>] start_secondary+0x3c9/0x560 arch/x86/kernel/smpboot.c:245 The issue is triggered as this: xfrm_add_policy -->verify_newpolicy_info //check the index provided by user with XFRM_POLICY_MAX //In my case, the index is 0x6E6BB6, so it pass the check. -->xfrm_policy_construct //copy the user's policy and set xfrm_policy_timer -->xfrm_policy_insert --> __xfrm_policy_link //use the orgin dir, in my case is 2 --> xfrm_gen_index //generate policy index, there is 0x6E6BB6 then xfrm_policy_timer be fired xfrm_policy_timer --> xfrm_policy_id2dir //get dir from (policy index & 7), in my case is 6 --> xfrm_policy_delete --> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is valid, to fix the issue. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e682adf021be ("xfrm: Try to honor policy index if it's supplied by user") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20xfrm: destroy xfrm_state synchronously on net exit pathCong Wang
[ Upstream commit f75a2804da391571563c4b6b29e7797787332673 ] xfrm_state_put() moves struct xfrm_state to the GC list and schedules the GC work to clean it up. On net exit call path, xfrm_state_flush() is called to clean up and xfrm_flush_gc() is called to wait for the GC work to complete before exit. However, this doesn't work because one of the ->destructor(), ipcomp_destroy(), schedules the same GC work again inside the GC work. It is hard to wait for such a nested async callback. This is also why syzbot still reports the following warning: WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351 ... ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153 cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551 process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153 worker_thread+0x143/0x14a0 kernel/workqueue.c:2296 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 In fact, it is perfectly fine to bypass GC and destroy xfrm_state synchronously on net exit call path, because it is in process context and doesn't need a work struct to do any blocking work. This patch introduces xfrm_state_put_sync() which simply bypasses GC, and lets its callers to decide whether to use this synchronous version. On net exit path, xfrm_state_fini() and xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is blocking, it can use xfrm_state_put_sync() directly too. Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to reflect this change. Fixes: b48c05ab5d32 ("xfrm: Fix warning in xfrm6_tunnel_net_exit.") Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23xfrm: Fix inbound traffic via XFRM interfaces across network namespacesTobias Brunner
[ Upstream commit 660899ddf06ae8bb5bbbd0a19418b739375430c5 ] After moving an XFRM interface to another namespace it stays associated with the original namespace (net in `struct xfrm_if` and the list keyed with `xfrmi_net_id`), allowing processes in the new namespace to use SAs/policies that were created in the original namespace. For instance, this allows a keying daemon in one namespace to establish IPsec SAs for other namespaces without processes there having access to the keys or IKE credentials. This worked fine for outbound traffic, however, for inbound traffic the lookup for the interfaces and the policies used the incorrect namespace (the one the XFRM interface was moved to). Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-15xfrm: refine validation of template and selector familiesFlorian Westphal
commit 35e6103861a3a970de6c84688c6e7a1f65b164ca upstream. The check assumes that in transport mode, the first templates family must match the address family of the policy selector. Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION, with ipv4-in-ipv6 chain, leading to following splat: BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854 Read of size 4 at addr ffff888063e57aa0 by task a.out/2050 xfrm_state_find+0x1db/0x1854 xfrm_tmpl_resolve+0x100/0x1d0 xfrm_resolve_and_create_bundle+0x108/0x1000 [..] Problem is that addresses point into flowi4 struct, but xfrm_state_find treats them as being ipv6 because it uses templ->encap_family is used (AF_INET6 in case of reproducer) rather than family (AF_INET). This patch inverts the logic: Enforce 'template family must match selector' EXCEPT for tunnel and BEET mode. In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local address pointers changed to point at the addresses found in the template, rather than the flowi ones, so no oob read will occur. Reported-by: 3ntr0py1337@gmail.com Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15xfrm: Make set-mark default behavior backward compatibleBenedict Wong
commit e2612cd496e7b465711d219ea6118893d7253f52 upstream. Fixes 9b42c1f179a6, which changed the default route lookup behavior for tunnel mode SAs in the outbound direction to use the skb mark, whereas previously mark=0 was used if the output mark was unspecified. In mark-based routing schemes such as Android’s, this change in default behavior causes routing loops or lookup failures. This patch restores the default behavior of using a 0 mark while still incorporating the skb mark if the SET_MARK (and SET_MARK_MASK) is specified. Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/860150 Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking") Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13xfrm: Fix NULL pointer dereference in xfrm_input when skb_dst_force clears ↵Steffen Klassert
the dst_entry. [ Upstream commit 0152eee6fc3b84298bb6a79961961734e8afa5b8 ] Since commit 222d7dbd258d ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code doesn't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in case the dst_entry was cleared. We also move the skb_dst_force() to a codepath that is not used when the transformation was offloaded, because in this case we don't have a dst_entry attached to the skb. The output and forwarding path was already fixed by commit 9e1437937807 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Fixes: 222d7dbd258d ("net: prevent dst uses after free") Reported-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13xfrm: Fix bucket count reported to userspaceBenjamin Poirier
[ Upstream commit ca92e173ab34a4f7fc4128bd372bd96f1af6f507 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909bc790 ("[XFRM]: Export SAD info.") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13xfrm: Fix error return code in xfrm_output_one()Wei Yongjun
[ Upstream commit 533555e5cbb6aa2d77598917871ae5b579fe724b ] xfrm_output_one() does not return a error code when there is no dst_entry attached to the skb, it is still possible crash with a NULL pointer dereference in xfrm_output_resume(). Fix it by return error code -EHOSTUNREACH. Fixes: 9e1437937807 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-29xfrm_user: fix freeing of xfrm states on acquireMathias Krause
commit 4a135e538962cb00a9667c82e7d2b9e4d7cd7177 upstream. Commit 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state") moved xfrm state objects to use their own slab cache. However, it missed to adapt xfrm_user to use this new cache when freeing xfrm states. Fix this by introducing and make use of a new helper for freeing xfrm_state objects. Fixes: 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state") Reported-by: Pan Bian <bianpan2016@163.com> Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11xfrm: policy: use hlist rcu variants on insertFlorian Westphal
bydst table/list lookups use rcu, so insertions must use rcu versions. Fixes: a7c44247f704e ("xfrm: policy: make xfrm_policy_lookup_bytype lockless") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-10-02xfrm: fix gro_cells leak when remove virtual xfrm interfacesLi RongQing
The device gro_cells has been initialized, it should be freed, otherwise it will be leaked Fixes: f203b76d78092faf2 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-10-01 1) Validate address prefix lengths in the xfrm selector, otherwise we may hit undefined behaviour in the address matching functions if the prefix is too big for the given address family. 2) Fix skb leak on local message size errors. From Thadeu Lima de Souza Cascardo. 3) We currently reset the transport header back to the network header after a transport mode transformation is applied. This leads to an incorrect transport header when multiple transport mode transformations are applied. Reset the transport header only after all transformations are already applied to fix this. From Sowmini Varadhan. 4) We only support one offloaded xfrm, so reset crypto_done after the first transformation in xfrm_input(). Otherwise we may call the wrong input method for subsequent transformations. From Sowmini Varadhan. 5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry. skb_dst_force does not really force a dst refcount anymore, it might clear it instead. xfrm code did not expect this, add a check to not dereference skb_dst() if it was cleared by skb_dst_force. 6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds read in xfrm_state_find. From Sean Tranchetti. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20xfrm: validate template modeSean Tranchetti
XFRM mode parameters passed as part of the user templates in the IP_XFRM_POLICY are never properly validated. Passing values other than valid XFRM modes can cause stack-out-of-bounds reads to occur later in the XFRM processing: [ 140.535608] ================================================================ [ 140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4 [ 140.550306] Read of size 4 at addr ffffffc0238a7a58 by task repro/5148 [ 140.557369] [ 140.558927] Call trace: [ 140.558936] dump_backtrace+0x0/0x388 [ 140.558940] show_stack+0x24/0x30 [ 140.558946] __dump_stack+0x24/0x2c [ 140.558949] dump_stack+0x8c/0xd0 [ 140.558956] print_address_description+0x74/0x234 [ 140.558960] kasan_report+0x240/0x264 [ 140.558963] __asan_report_load4_noabort+0x2c/0x38 [ 140.558967] xfrm_state_find+0x17e4/0x1cc4 [ 140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8 [ 140.558975] xfrm_lookup+0x238/0x1444 [ 140.558977] xfrm_lookup_route+0x48/0x11c [ 140.558984] ip_route_output_flow+0x88/0xc4 [ 140.558991] raw_sendmsg+0xa74/0x266c [ 140.558996] inet_sendmsg+0x258/0x3b0 [ 140.559002] sock_sendmsg+0xbc/0xec [ 140.559005] SyS_sendto+0x3a8/0x5a8 [ 140.559008] el0_svc_naked+0x34/0x38 [ 140.559009] [ 140.592245] page dumped because: kasan: bad access detected [ 140.597981] page_owner info is not active (free page?) [ 140.603267] [ 140.653503] ================================================================ Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-11xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.Steffen Klassert
Since commit 222d7dbd258d ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code don't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in cast the dst_entry was cleared. Fixes: 222d7dbd258d ("net: prevent dst uses after free") Reported-by: Tobias Hommel <netdev-list@genoetigt.de> Reported-by: Kristian Evensen <kristian.evensen@gmail.com> Reported-by: Wolfgang Walter <linux@stwm.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-04xfrm: reset crypto_done when iterating over multiple input xfrmsSowmini Varadhan
We only support one offloaded xfrm (we do not have devices that can handle more than one offload), so reset crypto_done in xfrm_input() when iterating over multiple transforms in xfrm_input, so that we can invoke the appropriate x->type->input for the non-offloaded transforms Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-08-03xfrm: Validate address prefix lengths in the xfrm selector.Steffen Klassert
We don't validate the address prefix lengths in the xfrm selector we got from userspace. This can lead to undefined behaviour in the address matching functions if the prefix is too big for the given address family. Fix this by checking the prefixes and refuse SA/policy insertation when a prefix is invalid. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Air Icy <icytxw@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-07-27 1) Extend the output_mark to also support the input direction and masking the mark values before applying to the skb. 2) Add a new lookup key for the upcomming xfrm interfaces. 3) Extend the xfrm lookups to match xfrm interface IDs. 4) Add virtual xfrm interfaces. The purpose of these interfaces is to overcome the design limitations that the existing VTI devices have. The main limitations that we see with the current VTI are the following: VTI interfaces are L3 tunnels with configurable endpoints. For xfrm, the tunnel endpoint are already determined by the SA. So the VTI tunnel endpoints must be either the same as on the SA or wildcards. In case VTI tunnel endpoints are same as on the SA, we get a one to one correlation between the SA and the tunnel. So each SA needs its own tunnel interface. On the other hand, we can have only one VTI tunnel with wildcard src/dst tunnel endpoints in the system because the lookup is based on the tunnel endpoints. The existing tunnel lookup won't work with multiple tunnels with wildcard tunnel endpoints. Some usecases require more than on VTI tunnel of this type, for example if somebody has multiple namespaces and every namespace requires such a VTI. VTI needs separate interfaces for IPv4 and IPv6 tunnels. So when routing to a VTI, we have to know to which address family this traffic class is going to be encapsulated. This is a lmitation because it makes routing more complex and it is not always possible to know what happens behind the VTI, e.g. when the VTI is move to some namespace. VTI works just with tunnel mode SAs. We need generic interfaces that ensures transfomation, regardless of the xfrm mode and the encapsulated address family. VTI is configured with a combination GRE keys and xfrm marks. With this we have to deal with some extra cases in the generic tunnel lookup because the GRE keys on the VTI are actually not GRE keys, the GRE keys were just reused for something else. All extensions to the VTI interfaces would require to add even more complexity to the generic tunnel lookup. So to overcome this, we developed xfrm interfaces with the following design goal: It should be possible to tunnel IPv4 and IPv6 through the same interface. No limitation on xfrm mode (tunnel, transport and beet). Should be a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. Interfaces should be configured with a new key that must match a new policy/SA lookup key. The lookup logic should stay in the xfrm codebase, no need to change or extend generic routing and tunnel lookups. Should be possible to use IPsec hardware offloads of the underlying interface. 5) Remove xfrm pcpu policy cache. This was added after the flowcache removal, but it turned out to make things even worse. From Florian Westphal. 6) Allow to update the set mark on SA updates. From Nathan Harold. 7) Convert some timestamps to time64_t. From Arnd Bergmann. 8) Don't check the offload_handle in xfrm code, it is an opaque data cookie for the driver. From Shannon Nelson. 9) Remove xfrmi interface ID from flowi. After this pach no generic code is touched anymore to do xfrm interface lookups. From Benedict Wong. 10) Allow to update the xfrm interface ID on SA updates. From Nathan Harold. 11) Don't pass zero to ERR_PTR() in xfrm_resolve_and_create_bundle. From YueHaibing. 12) Return more detailed errors on xfrm interface creation. From Benedict Wong. 13) Use PTR_ERR_OR_ZERO instead of IS_ERR + PTR_ERR. From the kbuild test robot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27xfrm: fix ptr_ret.cocci warningskbuild test robot
net/xfrm/xfrm_interface.c:692:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 44e2b838c24d ("xfrm: Return detailed errors from xfrmi_newlink") CC: Benedict Wong <benedictwong@google.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-26xfrm: Return detailed errors from xfrmi_newlinkBenedict Wong
Currently all failure modes of xfrm interface creation return EEXIST. This change improves the granularity of errnos provided by also returning ENODEV or EINVAL if failures happen in looking up the underlying interface, or a required parameter is not provided. This change has been tested against the Android Kernel Networking Tests, with additional xfrmi_newlink tests here: https://android-review.googlesource.com/c/kernel/tests/+/715755 Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-26xfrm: fix 'passing zero to ERR_PTR()' warningYueHaibing
Fix a static code checker warning: net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR' xfrm_tmpl_resolve return 0 just means no xdst found, return NULL instead of passing zero to ERR_PTR. Fixes: d809ec895505 ("xfrm: do not assume that template resolving always returns xfrms") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-24xfrm: remove blank lines at EOFStephen Hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20xfrm: Allow xfrmi if_id to be updated by UPDSANathan Harold
Allow attaching an SA to an xfrm interface id after the creation of the SA, so that tasks such as keying which must be done as the SA is created, can remain separate from the decision on how to route traffic from an SA. This permits SA creation to be decomposed in to three separate steps: 1) allocation of a SPI 2) algorithm and key negotiation 3) insertion into the data path Signed-off-by: Nathan Harold <nharold@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-20xfrm: Remove xfrmi interface ID from flowiBenedict Wong
In order to remove performance impact of having the extra u32 in every single flowi, this change removes the flowi_xfrm struct, prefering to take the if_id as a method parameter where needed. In the inbound direction, if_id is only needed during the __xfrm_check_policy() function, and the if_id can be determined at that point based on the skb. As such, xfrmi_decode_session() is only called with the skb in __xfrm_check_policy(). In the outbound direction, the only place where if_id is needed is the xfrm_lookup() call in xfrmi_xmit2(). With this change, the if_id is directly passed into the xfrm_lookup_with_ifid() call. All existing callers can still call xfrm_lookup(), which uses a default if_id of 0. This change does not change any behavior of XFRMIs except for improving overall system performance via flowi size reduction. This change has been tested against the Android Kernel Networking Tests: https://android.googlesource.com/kernel/tests/+/master/net/test Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-19xfrm: don't check offload_handle for nonzeroShannon Nelson
The offload_handle should be an opaque data cookie for the driver to use, much like the data cookie for a timer or alarm callback. Thus, the XFRM stack should not be checking for non-zero, because the driver might use that to store an array reference, which could be zero, or some other zero but meaningful value. We can remove the checks for non-zero because there are plenty other attributes also being checked to see if there is an offload in place for the SA in question. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-11xfrm: use time64_t for in-kernel timestampsArnd Bergmann
The lifetime managment uses '__u64' timestamps on the user space interface, but 'unsigned long' for reading the current time in the kernel with get_seconds(). While this is probably safe beyond y2038, it will still overflow in 2106, and the get_seconds() call is deprecated because fo that. This changes the xfrm time handling to use time64_t consistently, along with reading the time using the safer ktime_get_real_seconds(). It still suffers from problems that can happen from a concurrent settimeofday() call or (to a lesser degree) a leap second update, but since the time stamps are part of the user API, there is nothing we can do to prevent that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-01xfrm: Allow Set Mark to be Updated Using UPDSANathan Harold
Allow UPDSA to change "set mark" to permit policy separation of packet routing decisions from SA keying in systems that use mark-based routing. The set mark, used as a routing and firewall mark for outbound packets, is made update-able which allows routing decisions to be handled independently of keying/SA creation. To maintain consistency with other optional attributes, the set mark is only updated if sent with a non-zero value. The per-SA lock and the xfrm_state_lock are taken in that order to avoid a deadlock with xfrm_timer_handler(), which also takes the locks in that order. Signed-off-by: Nathan Harold <nharold@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-25xfrm: policy: remove pcpu policy cacheFlorian Westphal
Kristian Evensen says: In a project I am involved in, we are running ipsec (Strongswan) on different mt7621-based routers. Each router is configured as an initiator and has around ~30 tunnels to different responders (running on misc. devices). Before the flow cache was removed (kernel 4.9), we got a combined throughput of around 70Mbit/s for all tunnels on one router. However, we recently switched to kernel 4.14 (4.14.48), and the total throughput is somewhere around 57Mbit/s (best-case). I.e., a drop of around 20%. Reverting the flow cache removal restores, as expected, performance levels to that of kernel 4.9. When pcpu xdst exists, it has to be validated first before it can be used. A negative hit thus increases cost vs. no-cache. As number of tunnels increases, hit rate decreases so this pcpu caching isn't a viable strategy. Furthermore, the xdst cache also needs to run with BH off, so when removing this the bh disable/enable pairs can be removed too. Kristian tested a 4.14.y backport of this change and reported increased performance: In our tests, the throughput reduction has been reduced from around -20% to -5%. We also see that the overall throughput is independent of the number of tunnels, while before the throughput was reduced as the number of tunnels increased. Reported-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-25xfrm: free skb if nlsk pointer is NULLFlorian Westphal
nlmsg_multicast() always frees the skb, so in case we cannot call it we must do that ourselves. Fixes: 21ee543edc0dea ("xfrm: fix race between netns cleanup and state expire notification") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-23xfrm: Add virtual xfrm interfacesSteffen Klassert
This patch adds support for virtual xfrm interfaces. Packets that are routed through such an interface are guaranteed to be IPsec transformed or dropped. It is a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. This means that we can tunnel IPv4 and IPv6 through the same interface and support all xfrm modes (tunnel, transport and beet) on it. Co-developed-by: Lorenzo Colitti <lorenzo@google.com> Co-developed-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Benedict Wong <benedictwong@google.com> Tested-by: Antony Antony <antony@phenome.org> Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
2018-06-23xfrm: Add a new lookup key to match xfrm interfaces.Steffen Klassert
This patch adds the xfrm interface id as a lookup key for xfrm states and policies. With this we can assign states and policies to virtual xfrm interfaces. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Benedict Wong <benedictwong@google.com> Tested-by: Benedict Wong <benedictwong@google.com> Tested-by: Antony Antony <antony@phenome.org> Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-14 00:13:17 +0000