summaryrefslogtreecommitdiffstats
path: root/net/sctp
AgeCommit message (Collapse)Author
2021-05-22sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_bXin Long
[ Upstream commit f282df0391267fb2b263da1cc3233aa6fb81defc ] Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into ESTABLISHED from the state < ESTABLISHED and decremented when the asoc is being deleted. However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB multiple times but only decrement once at the end. I was able to reproduce it by using scapy to do the 4-way shakehands, after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field changed to different values, and SCTP_MIB_CURRESTAB was incremented multiple times and never went back to 0 even when the asoc was freed. This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when the state < ESTABLISHED in sctp_sf_do_dupcook_b(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22sctp: do asoc update earlier in sctp_sf_do_dupcook_aXin Long
[ Upstream commit 35b4f24415c854cd718ccdf38dbea6297f010aae ] There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this. Fixes: 145cb2f7177d ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK") Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22sctp: Fix out-of-bounds warning in sctp_process_asconf_param()Gustavo A. R. Silva
[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ] Fix the following out-of-bounds warning: net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds] This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22sctp: delay auto_asconf init until binding the first addrXin Long
commit 34e5b01186858b36c4d7c87e1a025071e8e2401f upstream. As Or Cohen described: If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. This patch is to fix it by moving the auto_asconf init out of sctp_init_sock(), by which inet_create()/inet6_create() won't need to operate it in sctp_destroy_sock() when calling sk_common_release(). It also makes more sense to do auto_asconf init while binding the first addr, as auto_asconf actually requires an ANY addr bind, see it in sctp_addr_wq_timeout_handler(). This addresses CVE-2021-23133. Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22Revert "net/sctp: fix race condition in sctp_destroy_sock"Xin Long
commit 01bfe5e8e428b475982a98a46cca5755726f3f7f upstream. This reverts commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b. This one has to be reverted as it introduced a dead lock, as syzbot reported: CPU0 CPU1 ---- ---- lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1 is that of sctp_close(). The original issue this commit fixed will be fixed in the next patch. Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28net/sctp: fix race condition in sctp_destroy_sockOr Cohen
commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b upstream. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock instead of sctp_close. This addresses CVE-2021-23133. Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14net-ipv6: bugfix - raw & sctp - switch to ipv6_can_nonlocal_bind()Maciej Żenczykowski
commit 630e4576f83accf90366686f39808d665d8dbecc upstream. Found by virtue of ipv6 raw sockets not honouring the per-socket IP{,V6}_FREEBIND setting. Based on hits found via: git grep '[.]ip_nonlocal_bind' We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT, and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl. The helper is defined as: static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) { return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent; } so this change only widens the accepted opt-outs and is thus a clean bugfix. I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug, but IMHO this should be applied to stable kernels as far back as possible. As such I'm adding a 'fixes' tag with the commit that originally added the helper, which happened in 4.19. Backporting to older LTS kernels (at least 4.9 and 4.14) would presumably require open-coding it or backporting the helper as well. Other possibly relevant commits: v4.18-rc6-1502-g83ba4645152d net: add helpers checking if socket can be bound to nonlocal address v4.18-rc6-1431-gd0c1f01138c4 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind v4.14-rc5-271-gb71d21c274ef sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND v4.7-rc7-1883-g9b9742022888 sctp: support ipv6 nonlocal bind v4.1-12247-g35a256fee52c ipv6: Nonlocal bind Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 83ba4645152d ("net: add helpers checking if socket can be bound to nonlocal address") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23net: fix iteration for sctp transport seq_filesNeilBrown
commit af8085f3a4712c57d0dd415ad543bac85780375c upstream. The sctp transport seq_file iterators take a reference to the transport in the ->start and ->next functions and releases the reference in the ->show function. The preferred handling for such resources is to release them in the subsequent ->next or ->stop function call. Since Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") there is no guarantee that ->show will be called after ->next, so this function can now leak references. So move the sctp_transport_put() call to ->next and ->stop. Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") Reported-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24sctp: change to hold/put transport for proto_unreach_timerXin Long
[ Upstream commit 057a10fa1f73d745c8e69aa54ab147715f5630ae ] A call trace was found in Hangbin's Codenomicon testing with debug kernel: [ 2615.981988] ODEBUG: free active (active state 0) object type: timer_list hint: sctp_generate_proto_unreach_event+0x0/0x3a0 [sctp] [ 2615.995050] WARNING: CPU: 17 PID: 0 at lib/debugobjects.c:328 debug_print_object+0x199/0x2b0 [ 2616.095934] RIP: 0010:debug_print_object+0x199/0x2b0 [ 2616.191533] Call Trace: [ 2616.194265] <IRQ> [ 2616.202068] debug_check_no_obj_freed+0x25e/0x3f0 [ 2616.207336] slab_free_freelist_hook+0xeb/0x140 [ 2616.220971] kfree+0xd6/0x2c0 [ 2616.224293] rcu_do_batch+0x3bd/0xc70 [ 2616.243096] rcu_core+0x8b9/0xd00 [ 2616.256065] __do_softirq+0x23d/0xacd [ 2616.260166] irq_exit+0x236/0x2a0 [ 2616.263879] smp_apic_timer_interrupt+0x18d/0x620 [ 2616.269138] apic_timer_interrupt+0xf/0x20 [ 2616.273711] </IRQ> This is because it holds asoc when transport->proto_unreach_timer starts and puts asoc when the timer stops, and without holding transport the transport could be freed when the timer is still running. So fix it by holding/putting transport instead for proto_unreach_timer in transport, just like other timers in transport. v1->v2: - Also use sctp_transport_put() for the "out_unlock:" path in sctp_generate_proto_unreach_event(), as Marcelo noticed. Fixes: 50b5d6ad6382 ("sctp: Fix a race between ICMP protocol unreachable and connect()") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platformsPetr Malat
[ Upstream commit b6df8c81412190fbd5eaa3cec7f642142d9c16cd ] Commit 978aa0474115 ("sctp: fix some type cast warnings introduced since very beginning")' broke err reading from sctp_arg, because it reads the value as 32-bit integer, although the value is stored as 16-bit integer. Later this value is passed to the userspace in 16-bit variable, thus the user always gets 0 on big-endian platforms. Fix it by reading the __u16 field of sctp_arg union, as reading err field would produce a sparse warning. Fixes: 978aa0474115 ("sctp: fix some type cast warnings introduced since very beginning") Signed-off-by: Petr Malat <oss@malat.biz> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/20201030132633.7045-1-oss@malat.biz Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14sctp: fix sctp_auth_init_hmacs() error pathEric Dumazet
commit d42ee76ecb6c49d499fc5eb32ca34468d95dbc3e upstream. After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot: BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874 CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1f485649f529 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01sctp: move trace_sctp_probe_path into sctp_outq_sackKevin Kou
[ Upstream commit f643ee295c1c63bc117fb052d4da681354d6f732 ] The original patch bringed in the "SCTP ACK tracking trace event" feature was committed at Dec.20, 2017, it replaced jprobe usage with trace events, and bringed in two trace events, one is TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path). The original patch intended to trigger the trace_sctp_probe_path in TRACE_EVENT(sctp_probe) as below code, +TRACE_EVENT(sctp_probe, + + TP_PROTO(const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + struct sctp_chunk *chunk), + + TP_ARGS(ep, asoc, chunk), + + TP_STRUCT__entry( + __field(__u64, asoc) + __field(__u32, mark) + __field(__u16, bind_port) + __field(__u16, peer_port) + __field(__u32, pathmtu) + __field(__u32, rwnd) + __field(__u16, unack_data) + ), + + TP_fast_assign( + struct sk_buff *skb = chunk->skb; + + __entry->asoc = (unsigned long)asoc; + __entry->mark = skb->mark; + __entry->bind_port = ep->base.bind_addr.port; + __entry->peer_port = asoc->peer.port; + __entry->pathmtu = asoc->pathmtu; + __entry->rwnd = asoc->peer.rwnd; + __entry->unack_data = asoc->unack_data; + + if (trace_sctp_probe_path_enabled()) { + struct sctp_transport *sp; + + list_for_each_entry(sp, &asoc->peer.transport_addr_list, + transports) { + trace_sctp_probe_path(sp, asoc); + } + } + ), But I found it did not work when I did testing, and trace_sctp_probe_path had no output, I finally found that there is trace buffer lock operation(trace_event_buffer_reserve) in include/trace/trace_events.h: static notrace void \ trace_event_raw_event_##call(void *__data, proto) \ { \ struct trace_event_file *trace_file = __data; \ struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\ struct trace_event_buffer fbuffer; \ struct trace_event_raw_##call *entry; \ int __data_size; \ \ if (trace_trigger_soft_disabled(trace_file)) \ return; \ \ __data_size = trace_event_get_offsets_##call(&__data_offsets, args); \ \ entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ \ trace_event_buffer_commit(&fbuffer); \ } The reason caused no output of trace_sctp_probe_path is that trace_sctp_probe_path written in TP_fast_assign part of TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the trace_event_buffer_reserve() when compiler expands Macro, entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ so trace_sctp_probe_path finally can not acquire trace_event_buffer and return no output, that is to say the nest of tracepoint entry function is not allowed. The function call flow is: trace_sctp_probe() -> trace_event_raw_event_sctp_probe() -> lock buffer -> trace_sctp_probe_path() -> trace_event_raw_event_sctp_probe_path() --nested -> buffer has been locked and return no output. This patch is to remove trace_sctp_probe_path from the TP_fast_assign part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function, and trigger sctp_probe_path_trace in sctp_outq_sack. After this patch, you can enable both events individually, # cd /sys/kernel/debug/tracing # echo 1 > events/sctp/sctp_probe/enable # echo 1 > events/sctp/sctp_probe_path/enable Or, you can enable all the events under sctp. # echo 1 > events/sctp/enable Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-12sctp: not disable bh in the whole sctp_get_port_local()Xin Long
[ Upstream commit 3106ecb43a05dc3e009779764b9da245a5d082de ] With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05sctp: implement memory accounting on tx pathXin Long
[ Upstream commit 1033990ac5b2ab6cee93734cb6d301aa3a35bcaa ] Now when sending packets, sk_mem_charge() and sk_mem_uncharge() have been used to set sk_forward_alloc. We just need to call sk_wmem_schedule() to check if the allocated should be raised, and call sk_mem_reclaim() to check if the allocated should be reduced when it's under memory pressure. If sk_wmem_schedule() returns false, which means no memory is allowed to allocate, it will block and wait for memory to become available. Note different from tcp, sctp wait_for_buf happens before allocating any skb, so memory accounting check is done with the whole msg_len before it too. Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31sctp: shrink stream outq when fails to do addstream reconfXin Long
[ Upstream commit 3ecdda3e9ad837cf9cb41b6faa11b1af3a5abc0c ] When adding a stream with stream reconf, the new stream firstly is in CLOSED state but new out chunks can still be enqueued. Then once gets the confirmation from the peer, the state will change to OPEN. However, if the peer denies, it needs to roll back the stream. But when doing that, it only sets the stream outcnt back, and the chunks already in the new stream don't get purged. It caused these chunks can still be dequeued in sctp_outq_dequeue_data(). As its stream is still in CLOSE, the chunk will be enqueued to the head again by sctp_outq_head_data(). This chunk will never be sent out, and the chunks after it can never be dequeued. The assoc will be 'hung' in a dead loop of sending this chunk. To fix it, this patch is to purge these chunks already in the new stream by calling sctp_stream_shrink_out() when failing to do the addstream reconf. Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31sctp: shrink stream outq only when new outcnt < old outcntXin Long
[ Upstream commit 8f13399db22f909a35735bf8ae2f932e0c8f0e30 ] It's not necessary to go list_for_each for outq->out_chunk_list when new outcnt >= old outcnt, as no chunk with higher sid than new (outcnt - 1) exists in the outqueue. While at it, also move the list_for_each code in a new function sctp_stream_shrink_out(), which will be used in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30sctp: Don't advertise IPv4 addresses if ipv6only is set on the socketMarcelo Ricardo Leitner
[ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ] If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and ↵Jere Leppänen
socket is closed [ Upstream commit d3e8e4c11870413789f029a71e72ae6e971fe678 ] Commit bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") starts shutdown when an association is restarted, if in SHUTDOWN-PENDING state and the socket is closed. However, the rationale stated in that commit applies also when in SHUTDOWN-SENT state - we don't want to move an association to ESTABLISHED state when the socket has been closed, because that results in an association that is unreachable from user space. The problem scenario: 1. Client crashes and/or restarts. 2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost. 3. Client reconnects using the same addresses and ports. 4. Server's association is restarted. The association and the socket move to ESTABLISHED state, even though the server process has closed its descriptor. Also, after step 4 when the server process exits, some resources are leaked in an attempt to release the underlying inet sock structure in ESTABLISHED state: IPv4: Attempt to release TCP socket in state 1 00000000377288c7 Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if an association is restarted in SHUTDOWN-SENT state and the socket is closed, then start shutdown and don't move the association or the socket to ESTABLISHED state. Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03sctp: Don't add the shutdown timer if its already been addedNeil Horman
[ Upstream commit 20a785aa52c82246055a089e55df9dac47d67da1 ] This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 #8 [f418df5c] sys_shutdown at c079eedf #9 [f418df70] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14sctp: Fix bundling of SHUTDOWN with COOKIE-ACKJere Leppänen
commit 145cb2f7177d94bc54563ed26027e952ee0ae03c upstream. When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them at the same time and in the correct order. This bundling was broken by commit 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc"), which assigns a transport for the COOKIE-ACK, but not for the SHUTDOWN. Fix this by passing a reference to the COOKIE-ACK chunk as an argument to sctp_sf_do_9_2_start_shutdown() and onward to sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same transport as the COOKIE-ACK chunk, which allows them to be bundled. In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was previously unused. Now that we're taking it into use, it must be a valid pointer to a chunk, or NULL. There is only one call site where it's not, in sctp_sf_autoclose_timer_expire(). Fix that too. Fixes: 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10sctp: Fix SHUTDOWN CTSN Ack in the peer restart caseJere Leppänen
commit 12dfd78e3a74825e6f0bc8df7ef9f938fbc6bfe3 upstream. When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29net: ipv6: add net argument to ip6_dst_lookup_flowSabrina Dubroca
commit c4e85f73afb6384123e5ef1bba3315b2e3ad031e upstream. This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 4.19: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13sctp: fix possibly using a bad saddr with a given dstMarcelo Ricardo Leitner
[ Upstream commit 582eea230536a6f104097dd46205822005d5fe3a ] Under certain circumstances, depending on the order of addresses on the interfaces, it could be that sctp_v[46]_get_dst() would return a dst with a mismatched struct flowi. For example, if when walking through the bind addresses and the first one is not a match, it saves the dst as a fallback (added in 410f03831c07), but not the flowi. Then if the next one is also not a match, the previous dst will be returned but with the flowi information for the 2nd address, which is wrong. The fix is to use a locally stored flowi that can be used for such attempts, and copy it to the parameter only in case it is a possible match, together with the corresponding dst entry. The patch updates IPv6 code mostly just to be in sync. Even though the issue is also present there, it fallback is not expected to work with IPv6. Fixes: 410f03831c07 ("sctp: add routing output fallback") Reported-by: Jin Meng <meng.a.jin@nokia-sbell.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13sctp: fix refcount bug in sctp_wfreeQiujun Huang
[ Upstream commit 5c3e82fe159622e46e91458c1a6509c321a62820 ] We should iterate over the datamsgs to move all chunks(skbs) to newsk. The following case cause the bug: for the trouble SKB, it was in outq->transmitted list sctp_outq_sack sctp_check_transmitted SKB was moved to outq->sacked list then throw away the sack queue SKB was deleted from outq->sacked (but it was held by datamsg at sctp_datamsg_to_asoc So, sctp_wfree was not called here) then migrate happened sctp_for_each_tx_datachunk( sctp_clear_owner_w); sctp_assoc_migrate(); sctp_for_each_tx_datachunk( sctp_set_owner_w); SKB was not in the outq, and was not changed to newsk finally __sctp_outq_teardown sctp_chunk_put (for another skb) sctp_datamsg_put __kfree_skb(msg->frag_list) sctp_wfree (for SKB) SKB->sk was still oldsk (skb->sk != asoc->base.sk). Reported-and-tested-by: syzbot+cea71eec5d6de256d54d@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Acked-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18inet_diag: return classid for all socket typesDmitry Yakunin
[ Upstream commit 83f73c5bb7b9a9135173f0ba2b1aa00c06664ff9 ] In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") croup classid reporting was fixed. But this works only for TCP sockets because for other socket types icsk parameter can be NULL and classid code path is skipped. This change moves classid handling to inet_diag_msg_attrs_fill() function. Also inet_diag_msg_attrs_size() helper was added and addends in nlmsg_new() were reordered to save order from inet_sk_diag_fill(). Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05sctp: move the format error check out of __sctp_sf_do_9_1_abortXin Long
[ Upstream commit 245709ec8be89af46ea7ef0444c9c80913999d99 ] When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27sctp: add chunks to sk_backlog when the newsk sk_socket is not setXin Long
[ Upstream commit 819be8108fded0b9e710bbbf81193e52f7bab2f7 ] This patch is to fix a NULL-ptr deref in selinux_socket_connect_helper: [...] kasan: GPF could be caused by NULL-ptr deref or user memory access [...] RIP: 0010:selinux_socket_connect_helper+0x94/0x460 [...] Call Trace: [...] selinux_sctp_bind_connect+0x16a/0x1d0 [...] security_sctp_bind_connect+0x58/0x90 [...] sctp_process_asconf+0xa52/0xfd0 [sctp] [...] sctp_sf_do_asconf+0x785/0x980 [sctp] [...] sctp_do_sm+0x175/0x5a0 [sctp] [...] sctp_assoc_bh_rcv+0x285/0x5b0 [sctp] [...] sctp_backlog_rcv+0x482/0x910 [sctp] [...] __release_sock+0x11e/0x310 [...] release_sock+0x4f/0x180 [...] sctp_accept+0x3f9/0x5a0 [sctp] [...] inet_accept+0xe7/0x720 It was caused by that the 'newsk' sk_socket was not set before going to security sctp hook when processing asconf chunk with SCTP_PARAM_ADD_IP or SCTP_PARAM_SET_PRIMARY: inet_accept()-> sctp_accept(): lock_sock(): lock listening 'sk' do_softirq(): sctp_rcv(): <-- [1] asconf chunk arrives and enqueued in 'sk' backlog sctp_sock_migrate(): set asoc's sk to 'newsk' release_sock(): sctp_backlog_rcv(): lock 'newsk' sctp_process_asconf() <-- [2] unlock 'newsk' sock_graft(): set sk_socket <-- [3] As it shows, at [1] the asconf chunk would be put into the listening 'sk' backlog, as accept() was holding its sock lock. Then at [2] asconf would get processed with 'newsk' as asoc's sk had been set to 'newsk'. However, 'newsk' sk_socket is not set until [3], while selinux_sctp_bind_connect() would deref it, then kernel crashed. Here to fix it by adding the chunk to sk_backlog until newsk sk_socket is set when .accept() is done. Note that sk->sk_socket can be NULL when the sock is closed, so SOCK_DEAD flag is also needed to check in sctp_newsk_ready(). Thanks to Ondrej for reviewing the code. Fixes: d452930fd3b9 ("selinux: Add SCTP support") Reported-by: Ying Xu <yinxu@redhat.com> Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLYXin Long
[ Upstream commit be7a7729207797476b6666f046d765bdf9630407 ] This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu
[ Upstream commit bd085ef678b2cc8c38c105673dfe8ff8f5ec0c57 ] The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31sctp: fully initialize v4 addr in some functionsXin Long
[ Upstream commit b6f3320b1d5267e7b583a6d0c88dda518101740c ] Syzbot found a crash: BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline] BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline] BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 Call Trace: crc32_body lib/crc32.c:112 [inline] crc32_le_generic lib/crc32.c:179 [inline] __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90 crypto_shash_update+0x4c5/0x530 crypto/shash.c:107 crc32c+0x150/0x220 lib/libcrc32c.c:47 sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36 __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640 sctp_compute_cksum include/net/sctp/checksum.h:59 [inline] sctp_packet_pack net/sctp/output.c:528 [inline] sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597 sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline] sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194 sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757 sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline] sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155 sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185 sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433 sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline] sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672 The issue was caused by transport->ipaddr set with uninit addr param, which was passed by: sctp_transport_init net/sctp/transport.c:47 [inline] sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100 sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611 sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline] where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize the padding of addr->v4. Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr) will become the part of skb, and the issue occurs. This patch is to fix it by initializing the padding of addr->v4 in sctp_v4_from_addr_param(), as well as other functions that do the similar thing, and these functions shouldn't trust that the caller initializes the memory, as Marcelo suggested. Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13sctp: frag_point sanity checkJakub Audykowicz
[ Upstream commit afd0a8006e98b1890908f81746c94ca5dae29d7c ] If for some reason an association's fragmentation point is zero, sctp_datamsg_from_user will try to endlessly try to divide a message into zero-sized chunks. This eventually causes kernel panic due to running out of memory. Although this situation is quite unlikely, it has occurred before as reported. I propose to add this simple last-ditch sanity check due to the severity of the potential consequences. Signed-off-by: Jakub Audykowicz <jakub.audykowicz@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-13sctp: increase sk_wmem_alloc when head->truesize is increasedXin Long
[ Upstream commit 0d32f17717e65e76cbdb248374dd162acdfe2fff ] I changed to count sk_wmem_alloc by skb truesize instead of 1 to fix the sk_wmem_alloc leak caused by later truesize's change in xfrm in Commit 02968ccf0125 ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit"). But I should have also increased sk_wmem_alloc when head->truesize is increased in sctp_packet_gso_append() as xfrm does. Otherwise, sctp gso packet will cause sk_wmem_alloc underflow. Fixes: 02968ccf0125 ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-13sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmitXin Long
[ Upstream commit 02968ccf0125d39b08ecef5946300a8a873c0942 ] Now sctp increases sk_wmem_alloc by 1 when doing set_owner_w for the skb allocked in sctp_packet_transmit and decreases by 1 when freeing this skb. But when this skb goes through networking stack, some subcomponents might change skb->truesize and add the same amount on sk_wmem_alloc. However sctp doesn't know the amount to decrease by, it would cause a leak on sk->sk_wmem_alloc and the sock can never be freed. Xiumei found this issue when it hit esp_output_head() by using sctp over ipsec, where skb->truesize is added and so is sk->sk_wmem_alloc. Since sctp has used sk_wmem_queued to count for writable space since Commit cd305c74b0f8 ("sctp: use sk_wmem_queued to check for writable space"), it's ok to fix it by counting sk_wmem_alloc by skb truesize in sctp_packet_transmit. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05sctp: cache netns in sctp_ep_commonXin Long
[ Upstream commit 312434617cb16be5166316cf9d08ba760b1042a1 ] This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcookNavid Emamdoost
[ Upstream commit b6631c6031c746ed004c4221ec0616d7a520f441 ] In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05sctp: don't compare hb_timer expire date before starting itMaciej Kwiecien
[ Upstream commit d1f20c03f48102e52eb98b8651d129b83134cae4 ] hb_timer might not start at all for a particular transport because its start is conditional. In a result a node is not sending heartbeats. Function sctp_transport_reset_hb_timer has two roles: - initial start of hb_timer for a given transport, - update expire date of hb_timer for a given transport. The function is optimized to update timer's expire only if it is before a new calculated one but this comparison is invalid for a timer which has not yet started. Such a timer has expire == 0 and if a new expire value is bigger than (MAX_JIFFIES / 2 + 2) then "time_before" macro will fail and timer will not start resulting in no heartbeat packets send by the node. This was found when association was initialized within first 5 mins after system boot due to jiffies init value which is near to MAX_JIFFIES. Test kernel version: 4.9.154 (ARCH=arm) hb_timer.expire = 0; //initialized, not started timer new_expire = MAX_JIFFIES / 2 + 2; //or more time_before(hb_timer.expire, new_expire) == false Fixes: ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often") Reported-by: Marcin Stojek <marcin.stojek@nokia.com> Tested-by: Marcin Stojek <marcin.stojek@nokia.com> Signed-off-by: Maciej Kwiecien <maciej.kwiecien@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01sctp: use sk_wmem_queued to check for writable spaceXin Long
[ Upstream commit cd305c74b0f8b49748a79a8f67fc8e5e3e0c4794 ] sk->sk_wmem_queued is used to count the size of chunks in out queue while sk->sk_wmem_alloc is for counting the size of chunks has been sent. sctp is increasing both of them before enqueuing the chunks, and using sk->sk_wmem_alloc to check for writable space. However, sk_wmem_alloc is also increased by 1 for the skb allocked for sending in sctp_packet_transmit() but it will not wake up the waiters when sk_wmem_alloc is decreased in this skb's destructor. If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf, the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf() will keep waiting if there's a skb allocked in sctp_packet_transmit, and later even if this skb got freed, the waiting thread will never get waked up. This issue has been there since very beginning, so we change to use sk->sk_wmem_queued to check for writable space as sk_wmem_queued is not increased for the skb allocked for sending, also as TCP does. SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto tuning which I will add in another patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10net: use skb_queue_empty_lockless() in busy poll contextsEric Dumazet
[ Upstream commit 3f926af3f4d688e2e11e7f8ed04e277a14d4d4a4 ] Busy polling usually runs without locks. Let's use skb_queue_empty_lockless() instead of skb_queue_empty() Also uses READ_ONCE() in __skb_try_recv_datagram() to address a similar potential problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet
[ Upstream commit 3ef7cf57c72f32f61e97f8fa401bc39ea1f1a5d4 ] Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10inet: stop leaking jiffies on the wireEric Dumazet
[ Upstream commit a904a0693c189691eeee64f6c6b188bd7dc244e9 ] Historically linux tried to stick to RFC 791, 1122, 2003 for IPv4 ID field generation. RFC 6864 made clear that no matter how hard we try, we can not ensure unicity of IP ID within maximum lifetime for all datagrams with a given source address/destination address/protocol tuple. Linux uses a per socket inet generator (inet_id), initialized at connection startup with a XOR of 'jiffies' and other fields that appear clear on the wire. Thiemo Nagel pointed that this strategy is a privacy concern as this provides 16 bits of entropy to fingerprint devices. Let's switch to a random starting point, this is just as good as far as RFC 6864 is concerned and does not leak anything critical. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thiemo Nagel <tnagel@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29sctp: change sctp_prot .no_autobind with trueXin Long
[ Upstream commit 63dfb7938b13fa2c2fbcb45f34d065769eb09414 ] syzbot reported a memory leak: BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64): backtrace: [...] slab_alloc mm/slab.c:3319 [inline] [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483 [...] sctp_bucket_create net/sctp/socket.c:8523 [inline] [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270 [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402 [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497 [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022 [...] sctp_setsockopt net/sctp/socket.c:4641 [inline] [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611 [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147 [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [...] __do_sys_setsockopt net/socket.c:2100 [inline] It was caused by when sending msgs without binding a port, in the path: inet_sendmsg() -> inet_send_prepare() -> inet_autobind() -> .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is not. Later when binding another port by sctp_setsockopt_bindx(), a new bucket will be created as bp->port is not set. sctp's autobind is supposed to call sctp_autobind() where it does all things including setting bp->port. Since sctp_autobind() is called in sctp_sendmsg() if the sk is not yet bound, it should have skipped the auto bind. THis patch is to avoid calling inet_autobind() in inet_send_prepare() by changing sctp_prot .no_autobind with true, also remove the unused .get_port. Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19sctp: use transport pf_retrans in sctp_do_8_2_transport_strikeXin Long
[ Upstream commit 10eb56c582c557c629271f1ee31e15e7a9b2558b ] Transport should use its own pf_retrans to do the error_count check, instead of asoc's. Otherwise, it's meaningless to make pf_retrans per transport. Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'Christophe JAILLET
[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ] The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25sctp: fix the transport error_count checkXin Long
[ Upstream commit a1794de8b92ea6bc2037f445b296814ac826693e ] As the annotation says in sctp_do_8_2_transport_strike(): "If the transport error count is greater than the pf_retrans threshold, and less than pathmaxrtx ..." It should be transport->error_count checked with pathmaxrxt, instead of asoc->pf_retrans. Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25sctp: fix memleak in sctp_send_reset_streamszhengbin
[ Upstream commit 6d5afe20397b478192ed8c38ec0ee10fa3aec649 ] If the stream outq is not empty, need to kfree nstr_list. Fixes: d570a59c5b5f ("sctp: only allow the out stream reset when the stream outq is empty") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-28sctp: not bind the socket in sctp_connectXin Long
[ Upstream commit 9b6c08878e23adb7cc84bdca94d8a944b03f099e ] Now when sctp_connect() is called with a wrong sa_family, it binds to a port but doesn't set bp->port, then sctp_get_af_specific will return NULL and sctp_connect() returns -EINVAL. Then if sctp_bind() is called to bind to another port, the last port it has bound will leak due to bp->port is NULL by then. sctp_connect() doesn't need to bind ports, as later __sctp_connect will do it if bp->port is NULL. So remove it from sctp_connect(). While at it, remove the unnecessary sockaddr.sa_family len check as it's already done in sctp_inet_connect. Fixes: 644fbdeacf1d ("sctp: fix the issue that flags are ignored when using kernel_connect") Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-28sctp: fix error handling on stream scheduler initializationMarcelo Ricardo Leitner
[ Upstream commit 4d1415811e492d9a8238f8a92dd0d51612c788e9 ] It allocates the extended area for outbound streams only on sendmsg calls, if they are not yet allocated. When using the priority stream scheduler, this initialization may imply into a subsequent allocation, which may fail. In this case, it was aborting the stream scheduler initialization but leaving the ->ext pointer (allocated) in there, thus in a partially initialized state. On a subsequent call to sendmsg, it would notice the ->ext pointer in there, and trip on uninitialized stuff when trying to schedule the data chunk. The fix is undo the ->ext initialization if the stream scheduler initialization fails and avoid the partially initialized state. Although syzkaller bisected this to commit 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc"), this bug was actually introduced on the commit I marked below. Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03sctp: change to hold sk after auth shkey is created successfullyXin Long
[ Upstream commit 25bff6d5478b2a02368097015b7d8eb727c87e16 ] Now in sctp_endpoint_init(), it holds the sk then creates auth shkey. But when the creation fails, it doesn't release the sk, which causes a sk defcnf leak, Here to fix it by only holding the sk when auth shkey is created successfully. Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.") Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22sctp: Free cookie before we memdup a new oneNeil Horman
[ Upstream commit ce950f1050cece5e406a5cde723c69bba60e1b26 ] Based on comments from Xin, even after fixes for our recent syzbot report of cookie memory leaks, its possible to get a resend of an INIT chunk which would lead to us leaking cookie memory. To ensure that we don't leak cookie memory, free any previously allocated cookie first. Change notes v1->v2 update subsystem tag in subject (davem) repeat kfree check for peer_random and peer_hmacs (xin) v2->v3 net->sctp also free peer_chunks v3->v4 fix subject tags v4->v5 remove cut line Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-11Fix memory leak in sctp_process_initNeil Horman
[ Upstream commit 0a8dd9f67cd0da7dc284f48b032ce00db1a68791 ] syzbot found the following leak in sctp_process_init BUG: memory leak unreferenced object 0xffff88810ef68400 (size 1024): comm "syz-executor273", pid 7046, jiffies 4294945598 (age 28.770s) hex dump (first 32 bytes): 1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25 ..(........h...% 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline] [<00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675 [<000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119 [<00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline] [<00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20 net/sctp/sm_make_chunk.c:2437 [<00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682 [inline] [<00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384 [inline] [<00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194 [inline] [<00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165 [<0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200 net/sctp/associola.c:1074 [<00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95 [<00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354 [<00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline] [<00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418 [<00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934 [<00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122 [<00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802 [<00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292 [<000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330 [<00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline] [<00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline] [<00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337 [<00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3 The problem was that the peer.cookie value points to an skb allocated area on the first pass through this function, at which point it is overwritten with a heap allocated value, but in certain cases, where a COOKIE_ECHO chunk is included in the packet, a second pass through sctp_process_init is made, where the cookie value is re-allocated, leaking the first allocation. Fix is to always allocate the cookie value, and free it when we are done using it. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-13 23:29:55 +0000