aboutsummaryrefslogtreecommitdiffstats
path: root/net/openvswitch/conntrack.c
AgeCommit message (Collapse)Author
2024-05-02net: openvswitch: Fix Use-After-Free in ovs_ct_exitHyunwoo Kim
[ Upstream commit 5ea7b72d4fac2fdbc0425cd8f2ea33abe95235b2 ] Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net: openvswitch: fix unwanted error log on timeout policy probingIlya Maximets
[ Upstream commit 4539f91f2a801c0c028c252bffae56030cfb2cae ] On startup, ovs-vswitchd probes different datapath features including support for timeout policies. While probing, it tries to execute certain operations with OVS_PACKET_ATTR_PROBE or OVS_FLOW_ATTR_PROBE attributes set. These attributes tell the openvswitch module to not log any errors when they occur as it is expected that some of the probes will fail. For some reason, setting the timeout policy ignores the PROBE attribute and logs a failure anyway. This is causing the following kernel log on each re-start of ovs-vswitchd: kernel: Failed to associated timeout policy `ovs_test_tp' Fix that by using the same logging macro that all other messages are using. The message will still be printed at info level when needed and will be rate limited, but with a net rate limiter instead of generic printk one. The nf_ct_set_timeout() itself will still print some info messages, but at least this change makes logging in openvswitch module more consistent. Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20240403203803.2137962-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02netfilter: conntrack: Fix data-races around ct markDaniel Xu
[ Upstream commit 52d1aa8b8249ff477aaa38b6f74a8ced780d079c ] nf_conn:mark can be read from and written to in parallel. Use READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted compiler optimizations. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14net: openvswitch: fix misuse of the cached connection on tuple changesIlya Maximets
commit 2061ecfdf2350994e5b61c43e50e98a7a70e95ee upstream. If packet headers changed, the cached nfct is no longer relevant for the packet and attempt to re-use it leads to the incorrect packet classification. This issue is causing broken connectivity in OpenStack deployments with OVS/OVN due to hairpin traffic being unexpectedly dropped. The setup has datapath flows with several conntrack actions and tuple changes between them: actions:ct(commit,zone=8,mark=0/0x1,nat(src)), set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)), set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)), ct(zone=8),recirc(0x4) After the first ct() action the packet headers are almost fully re-written. The next ct() tries to re-use the existing nfct entry and marks the packet as invalid, so it gets dropped later in the pipeline. Clearing the cached conntrack entry whenever packet tuple is changed to avoid the issue. The flow key should not be cleared though, because we should still be able to match on the ct_state if the recirculation happens after the tuple change but before the next ct() action. Cc: stable@vger.kernel.org Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Reported-by: Frode Nordahl <frode.nordahl@canonical.com> Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856 Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27netfilter: conntrack: convert to refcount_t apiFlorian Westphal
commit 719774377622bc4025d2a74f551b5dc2158c6c30 upstream. Convert nf_conn reference counting from atomic_t to refcount_t based api. refcount_t api provides more runtime sanity checks and will warn on certain constructs, e.g. refcount_inc() on a zero reference count, which usually indicates use-after-free. For this reason template allocation is changed to init the refcount to 1, the subsequenct add operations are removed. Likewise, init_conntrack() is changed to set the initial refcount to 1 instead refcount_inc(). This is safe because the new entry is not (yet) visible to other cpus. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08net: prefer nf_ct_put instead of nf_conntrack_putFlorian Westphal
[ Upstream commit 408bdcfce8dfd6902f75fbcd3b99d8b24b506597 ] Its the same as nf_conntrack_put(), but without the need for an indirect call. The downside is a module dependency on nf_conntrack, but all of these already depend on conntrack anyway. Cc: Paul Blakey <paulb@mellanox.com> Cc: dev@openvswitch.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08openvswitch: always update flow key after natAaron Conole
[ Upstream commit 60b44ca6bd7518dd38fa2719bc9240378b6172c3 ] During NAT, a tuple collision may occur. When this happens, openvswitch will make a second pass through NAT which will perform additional packet modification. This will update the skb data, but not the flow key that OVS uses. This means that future flow lookups, and packet matches will have incorrect data. This has been supported since 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack"). That commit failed to properly update the sw_flow_key attributes, since it only called the ovs_ct_nat_update_key once, rather than each time ovs_ct_nat_execute was called. As these two operations are linked, the ovs_ct_nat_execute() function should always make sure that the sw_flow_key is updated after a successful call through NAT infrastructure. Fixes: 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack") Cc: Dumitru Ceara <dceara@redhat.com> Cc: Numan Siddique <nusiddiq@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-10net: openvswitch: Remove unnecessary skb_nfct()Yejune Deng
There is no need add 'if (skb_nfct(skb))' assignment, the nf_conntrack_put() would check it. Signed-off-by: Yejune Deng <yejunedeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-05openvswitch: fix send of uninitialized stack memory in ct limit replyIlya Maximets
'struct ovs_zone_limit' has more members than initialized in ovs_ct_limit_get_default_limit(). The rest of the memory is a random kernel stack content that ends up being sent to userspace. Fix that by using designated initializer that will clear all non-specified fields. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-04net: openvswitch: Use 'skb_push_rcsum()' instead of hand coding itChristophe JAILLET
'skb_push()'/'skb_postpush_rcsum()' can be replaced by an equivalent 'skb_push_rcsum()' which is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ctwenxu
When openvswitch conntrack offload with act_ct action. The first rule do conntrack in the act_ct in tc subsystem. And miss the next rule in the tc and fallback to the ovs datapath but miss set post_ct flag which will lead the ct_state_key with -trk flag. Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08net: openvswitch: conntrack: simplify the return expression of ↵Zheng Yongjun
ovs_ct_limit_get_default_limit() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-20net: openvswitch: Be liberal in tcp conntrack.Numan Siddique
There is no easy way to distinguish if a conntracked tcp packet is marked invalid because of tcp_in_window() check error or because it doesn't belong to an existing connection. With this patch, openvswitch sets liberal tcp flag for the established sessions so that out of window packets are not marked invalid. A helper function - nf_ct_set_tcp_be_liberal(nf_conn) is added which sets this flag for both the directions of the nf_conn. Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Numan Siddique <nusiddiq@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201116130126.3065077-1-nusiddiq@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08openvswitch: handle DNAT tuple collisionDumitru Ceara
With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. For example, two openvswitch flows: nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) Assuming two TCP clients initiating the following connections: 10.0.0.10:5000->10.0.0.10:10 10.0.0.10:5000->10.0.0.20:10 Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing nf_conntrack_confirm() to fail because of tuple collision. Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. Reported-at: https://bugzilla.redhat.com/1877128 Suggested-by: Florian Westphal <fw@strlen.de> Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Dumitru Ceara <dceara@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-04net: openvswitch: Constify static struct genl_small_opsRikard Falkeborn
The only usage of these is to assign their address to the small_ops field in the genl_family struct, which is a const pointer, and applying ARRAY_SIZE() on them. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: openswitch: reuse the helper variable to improve the code readablityZeng Tao
In the function ovs_ct_limit_exit, there is already a helper vaibale which could be reused to improve the readability, so i fix it in this patch. Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-03openvswitch: Prevent kernel-infoleak in ovs_ct_put_key()Peilin Ye
ovs_ct_put_key() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 3-byte hole at the end of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix it by initializing `orig` with memset(). Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: openvswitch: ovs_ct_exit to be done under ovs_lockTonghao Zhang
syzbot wrote: | ============================= | WARNING: suspicious RCU usage | 5.7.0-rc1+ #45 Not tainted | ----------------------------- | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!! | | other info that might help us debug this: | rcu_scheduler_active = 2, debug_locks = 1 | ... | | stack backtrace: | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Workqueue: netns cleanup_net | Call Trace: | ... | ovs_ct_exit | ovs_exit_net | ops_exit_list.isra.7 | cleanup_net | process_one_work | worker_thread To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add lockdep_ovsl_is_held as optional lockdep expression. Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Yi-Hung Wei <yihung.wei@gmail.com> Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04openvswitch: support asymmetric conntrackAaron Conole
The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06openvswitch: Allow attaching helper in later commitYi-Hung Wei
This patch allows to attach conntrack helper to a confirmed conntrack entry. Currently, we can only attach alg helper to a conntrack entry when it is in the unconfirmed state. This patch enables an use case that we can firstly commit a conntrack entry after it passed some initial conditions. After that the processing pipeline will further check a couple of packets to determine if the connection belongs to a particular application, and attach alg helper to the connection in a later stage. Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28openvswitch: Properly set L4 keys on "later" IP fragmentsGreg Rose
When IP fragments are reassembled before being sent to conntrack, the key from the last fragment is used. Unless there are reordering issues, the last fragment received will not contain the L4 ports, so the key for the reassembled datagram won't contain them. This patch updates the key once we have a reassembled datagram. The handle_fragments() function works on L3 headers so we pull the L3/L4 flow key update code from key_extract into a new function 'key_extract_l3l4'. Then we add a another new function ovs_flow_key_update_l3l4() and export it so that it is accessible by handle_fragments() for conntrack packet reassembly. Co-authored-by: Justin Pettit <jpettit@ovn.org> Signed-off-by: Greg Rose <gvrose8192@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25openvswitch: Fix conntrack cache with timeoutYi-Hung Wei
This patch addresses a conntrack cache issue with timeout policy. Currently, we do not check if the timeout extension is set properly in the cached conntrack entry. Thus, after packet recirculate from conntrack action, the timeout policy is not applied properly. This patch fixes the aforementioned issue. Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24openvswitch: Fix log message in ovs conntrackYi-Hung Wei
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08openvswitch: Replace removed NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)Geert Uytterhoeven
Commit 4806e975729f99c7 ("netfilter: replace NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)") removed CONFIG_NF_NAT_NEEDED, but a new user popped up afterwards. Fixes: fec9c271b8f1bde1 ("openvswitch: load and reference the NAT helper.") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: =================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next, they are: 1) Move nft_expr_clone() to nft_dynset, from Paul Gortmaker. 2) Do not include module.h from net/netfilter/nf_tables.h, also from Paul. 3) Restrict conntrack sysctl entries to boolean, from Tonghao Zhang. 4) Several patches to add infrastructure to autoload NAT helper modules from their respective conntrack helper, this also includes the first client of this code in OVS, patches from Flavio Leitner. 5) Add support to match for conntrack ID, from Brett Mastbergen. 6) Spelling fix in connlabel, from Colin Ian King. 7) Use struct_size() from hashlimit, from Gustavo A. R. Silva. 8) Add optimized version of nf_inet_addr_mask(), from Li RongQing. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05openvswitch: check for null pointer return from nla_nest_start_noflagColin Ian King
The call to nla_nest_start_noflag can return null in the unlikely event that nla_put returns -EMSGSIZE. Check for this condition to avoid a null pointer dereference on pointer nla_reply. Addresses-Coverity: ("Dereference null return value") Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30openvswitch: load and reference the NAT helper.Flavio Leitner
This improves the original commit 17c357efe5ec ("openvswitch: load NAT helper") where it unconditionally tries to load the module for every flow using NAT, so not efficient when loading multiple flows. It also doesn't hold any references to the NAT module while the flow is active. This change fixes those problems. It will try to load the module only if it's not present. It grabs a reference to the NAT module and holds it while the flow is active. Finally, an error message shows up if either actions above fails. Fixes: 17c357efe5ec ("openvswitch: load NAT helper") Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08netfilter: replace NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)Florian Westphal
NF_NAT_NEEDED is true whenever nat support for either ipv4 or ipv6 is enabled. Now that the af-specific nat configuration switches have been removed, IS_ENABLED(CONFIG_NF_NAT) has the same effect. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-02openvswitch: use after free in __ovs_ct_free_action()Dan Carpenter
We free "ct_info->ct" and then use it on the next line when we pass it to nf_ct_destroy_timeout(). This patch swaps the order to avoid the use after free. Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28openvswitch: Add timeout support to ct actionYi-Hung Wei
Add support for fine-grain timeout support to conntrack action. The new OVS_CT_ATTR_TIMEOUT attribute of the conntrack action specifies a timeout to be associated with this connection. If no timeout is specified, it acts as is, that is the default timeout for the connection will be automatically applied. Example usage: $ nfct timeout add timeout_1 inet tcp syn_sent 100 established 200 $ ovs-ofctl add-flow br0 in_port=1,ip,tcp,action=ct(commit,timeout=timeout_1) CC: Pravin Shelar <pshelar@ovn.org> CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26openvswitch: add seqadj extension when NAT is used.Flavio Leitner
When the conntrack is initialized, there is no helper attached yet so the nat info initialization (nf_nat_setup_info) skips adding the seqadj ext. A helper is attached later when the conntrack is not confirmed but is going to be committed. In this case, if NAT is needed then adds the seqadj ext as well. Fixes: 16ec3d4fbb96 ("openvswitch: Fix cached ct with helper.") Signed-off-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27netfilter: nat: remove nf_nat_l3proto.h and nf_nat_core.hFlorian Westphal
The l3proto name is gone, its header file is the last trace. While at it, also remove nf_nat_core.h, its very small and all users include nf_nat.h too. before: text data bss dec hex filename 22948 1612 4136 28696 7018 nf_nat.ko after removal of l3proto register/unregister functions: text data bss dec hex filename 22196 1516 4136 27848 6cc8 nf_nat.ko checkpatch complains about overly long lines, but line breaks do not make things more readable and the line length gets smaller here, not larger. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27netfilter: nat: merge nf_nat_ipv4,6 into nat coreFlorian Westphal
before: text data bss dec hex filename 16566 1576 4136 22278 5706 nf_nat.ko 3598 844 0 4442 115a nf_nat_ipv6.ko 3187 844 0 4031 fbf nf_nat_ipv4.ko after: text data bss dec hex filename 22948 1612 4136 28696 7018 nf_nat.ko ... with ipv4/v6 nat now provided directly via nf_nat.ko. Also changes: ret = nf_nat_ipv4_fn(priv, skb, state); if (ret != NF_DROP && ret != NF_STOLEN && into if (ret != NF_ACCEPT) return ret; everywhere. The nat hooks never should return anything other than ACCEPT or DROP (and the latter only in rare error cases). The original code uses multi-line ANDing including assignment-in-if: if (ret != NF_DROP && ret != NF_STOLEN && !(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) && (ct = nf_ct_get(skb, &ctinfo)) != NULL) { I removed this while moving, breaking those in separate conditionals and moving the assignments into extra lines. checkpatch still generates some warnings: 1. Overly long lines (of moved code). Breaking them is even more ugly. so I kept this as-is. 2. use of extern function declarations in a .c file. This is necessary evil, we must call nf_nat_l3proto_register() from the nat core now. All l3proto related functions are removed later in this series, those prototypes are then removed as well. v2: keep empty nf_nat_ipv6_csum_update stub for CONFIG_IPV6=n case. v3: remove IS_ENABLED(NF_NAT_IPV4/6) tests, NF_NAT_IPVx toggles are removed here. v4: also get rid of the assignments in conditionals. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18netfilter: conntrack: avoid unneeded nf_conntrack_l4proto lookupsFlorian Westphal
after removal of the packet and invert function pointers, several places do not need to lookup the l4proto structure anymore. Remove those lookups. The function nf_ct_invert_tuplepr becomes redundant, replace it with nf_ct_invert_tuple everywhere. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-30openvswitch: fix spelling mistake "execeeds" -> "exceeds"Colin Ian King
There is a spelling mistake in a net_warn_ratelimited message, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELSArnd Bergmann
When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler fails to optimize out a dead code path, which leads to a link failure: net/openvswitch/conntrack.o: In function `ovs_ct_set_labels': conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace' In this configuration, we can take a shortcut, and completely remove the contrack label code. This may also help the regular optimization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree: 1) Support for matching on ipsec policy already set in the route, from Florian Westphal. 2) Split set destruction into deactivate and destroy phase to make it fit better into the transaction infrastructure, also from Florian. This includes a patch to warn on imbalance when setting the new activate and deactivate interfaces. 3) Release transaction list from the workqueue to remove expensive synchronize_rcu() from configuration plane path. This speeds up configuration plane quite a bit. From Florian Westphal. 4) Add new xfrm/ipsec extension, this new extension allows you to match for ipsec tunnel keys such as source and destination address, spi and reqid. From Máté Eckl and Florian Westphal. 5) Add secmark support, this includes connsecmark too, patches from Christian Gottsche. 6) Allow to specify remaining bytes in xt_quota, from Chenbo Feng. One follow up patch to calm a clang warning for this one, from Nathan Chancellor. 7) Flush conntrack entries based on layer 3 family, from Kristian Evensen. 8) New revision for cgroups2 to shrink the path field. 9) Get rid of obsolete need_conntrack(), as a result from recent demodularization works. 10) Use WARN_ON instead of BUG_ON, from Florian Westphal. 11) Unused exported symbol in nf_nat_ipv4_fn(), from Florian. 12) Remove superfluous check for timeout netlink parser and dump functions in layer 4 conntrack helpers. 13) Unnecessary redundant rcu read side locks in NAT redirect, from Taehee Yoo. 14) Pass nf_hook_state structure to error handlers, patch from Florian Westphal. 15) Remove ->new() interface from layer 4 protocol trackers. Place them in the ->packet() interface. From Florian. 16) Place conntrack ->error() handling in the ->packet() interface. Patches from Florian Westphal. 17) Remove unused parameter in the pernet initialization path, also from Florian. 18) Remove additional parameter to specify layer 3 protocol when looking up for protocol tracker. From Florian. 19) Shrink array of layer 4 protocol trackers, from Florian. 20) Check for linear skb only once from the ALG NAT mangling codebase, from Taehee Yoo. 21) Use rhashtable_walk_enter() instead of deprecated rhashtable_walk_init(), also from Taehee. 22) No need to flush all conntracks when only one single address is gone, from Tan Hu. 23) Remove redundant check for NAT flags in flowtable code, from Taehee Yoo. 24) Use rhashtable_lookup() instead of rhashtable_lookup_fast() from netfilter codebase, since rcu read lock side is already assumed in this path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04openvswitch: load NAT helperFlavio Leitner
Load the respective NAT helper module if the flow uses it. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Revert "openvswitch: Fix template leak in error cases."Flavio Leitner
This reverts commit 90c7afc96cbbd77f44094b5b651261968e97de67. When the commit was merged, the code used nf_ct_put() to free the entry, but later on commit 76644232e612 ("openvswitch: Free tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which is a more appropriate. Now the original problem is removed. Then 44d6e2f27328 ("net: Replace NF_CT_ASSERT() with WARN_ON().") replaced a debug assert with a WARN_ON() which is trigged now. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20netfilter: conntrack: pass nf_hook_state to packet and error handlersFlorian Westphal
nf_hook_state contains all the hook meta-information: netns, protocol family, hook location, and so on. Instead of only passing selected information, pass a pointer to entire structure. This will allow to merge the error and the packet handlers and remove the ->new() function in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-18ipv6: remove dependency of nf_defrag_ipv6 on ipv6 moduleFlorian Westphal
IPV6=m DEFRAG_IPV6=m CONNTRACK=y yields: net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get': net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable' net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6' Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params ip6_frag_init and ip6_expire_frag_queue so it would be needed to force IPV6=y too. This patch gets rid of the 'followup linker error' by removing the dependency of ipv6.ko symbols from netfilter ipv6 defrag. Shared code is placed into a header, then used from both. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-18netfilter: Remove useless param helper of nf_ct_helper_ext_addGao Feng
The param helper of nf_ct_helper_ext_add is useless now, then remove it now. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-30 06:03:00 +0000