summaryrefslogtreecommitdiffstats
path: root/net/ipv6/icmp.c
AgeCommit message (Collapse)Author
2014-04-14ipv6: some ipv6 statistic counters failed to disable bhHannes Frederic Sowa
[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ] After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-09ipv6: icmp6_send: fix Oops when pinging a not set up IPv6 peer on a sit tunnelFX Le Bail
The patch 446fab59333dea91e54688f033dd8d788d0486fb ("ipv6: enable anycast addresses as source addresses in ICMPv6 error messages") causes an Oops when pinging a not set up IPv6 peer on a sit tunnel. The problem is that ipv6_anycast_destination() uses unconditionally skb_dst(skb), which is NULL in this case. The solution is to use instead the ipv6_chk_acast_addr_src() function. Here are the steps to reproduce it: modprobe sit ip link add sit1 type sit remote 10.16.0.121 local 10.16.0.249 ip l s sit1 up ip -6 a a dev sit1 2001:1234::123 remote 2001:1234::121 ping6 2001:1234::121 Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21ipv6: enable anycast addresses as source addresses in ICMPv6 error messagesFX Le Bail
- Uses ipv6_anycast_destination() in icmp6_send(). Suggested-by: Bill Fink <billfink@mindspring.com> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14IPv6: move the anycast_src_echo_reply sysctl to netns_sysctl_ipv6FX Le Bail
This change move anycast_src_echo_reply sysctl with other ipv6 sysctls. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ipv6: copy traffic class from ping request to replyHannes Frederic Sowa
Suggested-by: Simon Schneider <simon-schneider@gmx.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07IPv6: add the option to use anycast addresses as source addresses in echo replyFX Le Bail
This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01ipv6: namespace cleanupsstephen hemminger
Running 'make namespacecheck' shows: net/ipv6/route.o ipv6_route_table_template rt6_bind_peer net/ipv6/icmp.o icmpv6_route_lookup ipv6_icmp_table_template This addresses some of those warnings by: * make icmpv6_route_lookup static * move inline's out of ip6_route.h since only used into route.c * move rt6_bind_peer into route.c Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ipv6:introduce function to find route for redirectDuan Jiong
RFC 4861 says that the IP source address of the Redirect is the same as the current first-hop router for the specified ICMP Destination Address, so the gateway should be taken into consideration when we find the route for redirect. There was once a check in commit a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over all possible rules on receipt of redirect.") and the check went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()"). The bug is only "exploitable" on layer-2 because the source address of the redirect is checked to be a valid link-local address but it makes spoofing a lot easier in the same L2 domain nonetheless. Thanks very much for Hannes's help. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03ICMPv6: treat dest unreachable codes 5 and 6 as EACCES, not EPROTOJiri Bohac
RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773 Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: Convert uses of typedef ctl_table to struct ctl_tableJoe Perches
Reduce the uses of this unnecessary typedef. Done via perl script: $ git grep --name-only -w ctl_table net | \ xargs perl -p -i -e '\ sub trim { my ($local) = @_; $local =~ s/(^\s+|\s+$)//g; return $local; } \ s/\b(?<!struct\s)ctl_table\b(\s*\*\s*|\s+\w+)/"struct ctl_table " . trim($1)/ge' Reflow the modified lines that now exceed 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28ipv6: Correct comparisons and calculations using skb->tail and ↵Simon Horman
skb-transport_header This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25net: ipv6: Add IPv6 support to the ping socket.Lorenzo Colitti
This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29net: Add MIB counters for checksum errorsEric Dumazet
Add MIB counters for checksum errors in IP layer, and TCP/UDP/ICMP layers, to help diagnose problems. $ nstat -a | grep Csum IcmpInCsumErrors 72 0.0 TcpInCsumErrors 382 0.0 UdpInCsumErrors 463221 0.0 Icmp6InCsumErrors 75 0.0 Udp6InCsumErrors 173442 0.0 IpExtInCsumErrors 10884 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29ipv6: Kill ipv6 dependency of icmpv6_send().Pravin B Shelar
Following patch adds icmp-registration module for ipv6. It allows ipv6 protocol to register icmp_sender which is used for sending ipv6 icmp msgs. This extra layer allows us to kill ipv6 dependency for sending icmp packets. This patch also fixes ip_tunnel compilation problem when ip_tunnel is statically compiled in kernel but ipv6 is module Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08ipv6: use newly introduced __ipv6_addr_needs_scope_id and ipv6_iface_scope_idHannes Frederic Sowa
This patch requires multicast interface-scoped addresses to supply a sin6_scope_id. Because the sin6_scope_id is now also correctly used in case of interface-scoped multicast traffic this enables one to use interface scoped addresses over interfaces which are not targeted by the default multicast route (the route has to be put there manually, though). getsockname() and getpeername() now return the correct sin6_scope_id in case of interface-local mc addresses. v2: a) rebased ontop of patch 1/4 (now uses ipv6_addr_props) v3: a) reverted changes for ipv6_addr_props v4: a) unchanged Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>dave Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18ipv6: Add an error handler for icmp6Steffen Klassert
pmtu and redirect events are now handled in the protocols error handler, so add an error handler for icmp6 to do this. It is needed in the case when we have no socket context. Based on a patch by Duan Jiong. Reported-by: Duan Jiong <djduanjiong@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18net: Enable some sysctls that are safe for the userns rootEric W. Biederman
- Enable the per device ipv4 sysctls: net/ipv4/conf/<if>/forwarding net/ipv4/conf/<if>/mc_forwarding net/ipv4/conf/<if>/accept_redirects net/ipv4/conf/<if>/secure_redirects net/ipv4/conf/<if>/shared_media net/ipv4/conf/<if>/rp_filter net/ipv4/conf/<if>/send_redirects net/ipv4/conf/<if>/accept_source_route net/ipv4/conf/<if>/accept_local net/ipv4/conf/<if>/src_valid_mark net/ipv4/conf/<if>/proxy_arp net/ipv4/conf/<if>/medium_id net/ipv4/conf/<if>/bootp_relay net/ipv4/conf/<if>/log_martians net/ipv4/conf/<if>/tag net/ipv4/conf/<if>/arp_filter net/ipv4/conf/<if>/arp_announce net/ipv4/conf/<if>/arp_ignore net/ipv4/conf/<if>/arp_accept net/ipv4/conf/<if>/arp_notify net/ipv4/conf/<if>/proxy_arp_pvlan net/ipv4/conf/<if>/disable_xfrm net/ipv4/conf/<if>/disable_policy net/ipv4/conf/<if>/force_igmp_version net/ipv4/conf/<if>/promote_secondaries net/ipv4/conf/<if>/route_localnet - Enable the global ipv4 sysctl: net/ipv4/ip_forward - Enable the per device ipv6 sysctls: net/ipv6/conf/<if>/forwarding net/ipv6/conf/<if>/hop_limit net/ipv6/conf/<if>/mtu net/ipv6/conf/<if>/accept_ra net/ipv6/conf/<if>/accept_redirects net/ipv6/conf/<if>/autoconf net/ipv6/conf/<if>/dad_transmits net/ipv6/conf/<if>/router_solicitations net/ipv6/conf/<if>/router_solicitation_interval net/ipv6/conf/<if>/router_solicitation_delay net/ipv6/conf/<if>/force_mld_version net/ipv6/conf/<if>/use_tempaddr net/ipv6/conf/<if>/temp_valid_lft net/ipv6/conf/<if>/temp_prefered_lft net/ipv6/conf/<if>/regen_max_retry net/ipv6/conf/<if>/max_desync_factor net/ipv6/conf/<if>/max_addresses net/ipv6/conf/<if>/accept_ra_defrtr net/ipv6/conf/<if>/accept_ra_pinfo net/ipv6/conf/<if>/accept_ra_rtr_pref net/ipv6/conf/<if>/router_probe_interval net/ipv6/conf/<if>/accept_ra_rt_info_max_plen net/ipv6/conf/<if>/proxy_ndp net/ipv6/conf/<if>/accept_source_route net/ipv6/conf/<if>/optimistic_dad net/ipv6/conf/<if>/mc_forwarding net/ipv6/conf/<if>/disable_ipv6 net/ipv6/conf/<if>/accept_dad net/ipv6/conf/<if>/force_tllao - Enable the global ipv6 sysctls: net/ipv6/bindv6only net/ipv6/icmp/ratelimit Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18net: Don't export sysctls to unprivileged usersEric W. Biederman
In preparation for supporting the creation of network namespaces by unprivileged users, modify all of the per net sysctl exports and refuse to allow them to unprivileged users. This makes it safe for unprivileged users in general to access per net sysctls, and allows sysctls to be exported to unprivileged users on an individual basis as they are deemed safe. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ipv6: use IS_ENABLED()Amerigo Wang
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().David S. Miller
And delete rt6_redirect(), since it is no longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Minimize use of cached route inetpeer.David S. Miller
Only use it in the absolutely required cases: 1) COW'ing metrics 2) ipv4 PMTU 3) ipv4 redirects Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19inet: Sanitize inet{,6} protocol demux.David S. Miller
Don't pretend that inet_protos[] and inet6_protos[] are hashes, thay are just a straight arrays. Remove all unnecessary hash masking. Document MAX_INET_PROTOS. Use RAW_HTABLE_SIZE when appropriate. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15ipv6: Handle PMTU in ICMP error handlers.David S. Miller
One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts to handle the error pass the 32-bit info cookie in network byte order whereas ipv4 passes it around in host byte order. Like the ipv4 side, we have two helper functions. One for when we have a socket context and one for when we do not. ip6ip6 tunnels are not handled here, because they handle PMTU events by essentially relaying another ICMP packet-too-big message back to the original sender. This patch allows us to get rid of rt6_do_pmtu_disc(). It handles all kinds of situations that simply cannot happen when we do the PMTU update directly using a fully resolved route. In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very likely be removed or changed into a BUG_ON() check. We should never have a prefixed ipv6 route when we get there. Another piece of strange history here is that TCP and DCCP, unlike in ipv4, never invoke the update_pmtu() method from their ICMP error handlers. This is incredibly astonishing since this is the context where we have the most accurate context in which to make a PMTU update, namely we have a fully connected socket and associated cached socket route. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08inet: Create and use rt{,6}_get_peer_create().David S. Miller
There's a lot of places that open-code rt{,6}_get_peer() only because they want to set 'create' to one. So add an rt{,6}_get_peer_create() for their sake. There were also a few spots open-coding plain rt{,6}_get_peer() and those are transformed here as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipv6: bool/const conversions phase2Eric Dumazet
Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net: ipv6: Standardize prefixes for message loggingJoe Perches
Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-02net/ipv6/icmp.c: Checkpatch cleanupsEldad Zack
icmp.c:501: ERROR: "(foo*)" should be "(foo *)" icmp.c:582: ERROR: "(foo*)" should be "(foo *)" icmp.c:954: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-02-08ipv6: Implement IPV6_UNICAST_IF socket option.Erich E. Hoover
The IPV6_UNICAST_IF feature is the IPv6 compliment to IP_UNICAST_IF. Signed-off-by: Erich E. Hoover <ehoover@mines.edu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03ipv6: Add fragment reporting to ipv6_skip_exthdr().Jesse Gross
While parsing through IPv6 extension headers, fragment headers are skipped making them invisible to the caller. This reports the fragment offset of the last header in order to make it possible to determine whether the packet is fragmented and, if so whether it is a first or last fragment. Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13net: more accurate skb truesizeEric Dumazet
skb truesize currently accounts for sk_buff struct and part of skb head. kmalloc() roundings are also ignored. Considering that skb_shared_info is larger than sk_buff, its time to take it into account for better memory accounting. This patch introduces SKB_TRUESIZE(X) macro to centralize various assumptions into a single place. At skb alloc phase, we put skb_shared_info struct at the exact end of skb head, to allow a better use of memory (lowering number of reallocations), since kmalloc() gives us power-of-two memory blocks. Unless SLUB/SLUB debug is active, both skb->head and skb_shared_info are aligned to cache lines, as before. Note: This patch might trigger performance regressions because of misconfigured protocol stacks, hitting per socket or global memory limits that were previously not reached. But its a necessary step for a more accurate memory accounting. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Andi Kleen <ak@linux.intel.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01ipv6: some RCU conversionsEric Dumazet
ICMP and ND are not fast path, but still we can avoid changing idev refcount, using RCU. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put fl6_* macros to struct flowi6 and use them again.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12ipv6: Convert to use flowi6 where applicable.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Make flowi ports AF dependent.David S. Miller
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02xfrm: Return dst directly from xfrm_lookup()David S. Miller
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv6: Make icmp route lookup code a bit clearer.David S. Miller
The route lookup code in icmpv6_send() is slightly tricky as a result of having to handle all of the requirements of RFC 4301 host relookups. Pull the route resolution into a seperate function, so that the error handling and route reference counting is hopefully easier to see and contained wholly within this new routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04inetpeer: Move ICMP rate limiting state into inet_peer entries.David S. Miller
Like metrics, the ICMP rate limiting bits are cached state about a destination. So move it into the inet_peer entries. If an inet_peer cannot be bound (the reason is memory allocation failure or similar), the policy is to allow. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09ipv6: fix ICMP6_MIB_OUTERRORSEric Dumazet
In commit 1f8438a85366 (icmp: Account for ICMP out errors), I did a typo on IPV6 side, using ICMP6_MIB_OUTMSGS instead of ICMP6_MIB_OUTERRORS Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23IPv6: Add dontfrag argument to relevant functionsBrian Haley
Add dontfrag argument to relevant functions for IPV6_DONTFRAG support, as well as allowing the value to be passed-in via ancillary cmsg data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-03icmp: Account for ICMP out errorsEric Dumazet
When ip_append() fails because of socket limit or memory shortage, increment ICMP_MIB_OUTERRORS counter, so that "netstat -s" can report these errors. LANG=C netstat -s | grep "ICMP messages failed" 0 ICMP messages failed For IPV6, implement ICMP6_MIB_OUTERRORS counter as well. # grep Icmp6OutErrors /proc/net/dev_snmp6/* /proc/net/dev_snmp6/eth0:Icmp6OutErrors 0 /proc/net/dev_snmp6/lo:Icmp6OutErrors 0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-18ipv6: drop unused "dev" arg of icmpv6_send()Alexey Dobriyan
Dunno, what was the idea, it wasn't used for a long time. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ipv6: remove stale MIB definitionsAlexey Dobriyan
ICMP6 MIB statistics was per-netns for quite a time. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 12:53:39 +0000