| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
# Conflicts:
# kernel/printk/printk.c
|
|
commit ff91059932401894e6c86341915615c5eb0eca48 upstream.
syzkaller started using corpuses where a BPF tracing program deletes
elements from a sockmap/sockhash map. Because BPF tracing programs can be
invoked from any interrupt context, locks taken during a map_delete_elem
operation must be hardirq-safe. Otherwise a deadlock due to lock inversion
is possible, as reported by lockdep:
CPU0 CPU1
---- ----
lock(&htab->buckets[i].lock);
local_irq_disable();
lock(&host->lock);
lock(&htab->buckets[i].lock);
<Interrupt>
lock(&host->lock);
Locks in sockmap are hardirq-unsafe by design. We expects elements to be
deleted from sockmap/sockhash only in task (normal) context with interrupts
enabled, or in softirq context.
Detect when map_delete_elem operation is invoked from a context which is
_not_ hardirq-unsafe, that is interrupts are disabled, and bail out with an
error.
Note that map updates are not affected by this issue. BPF verifier does not
allow updating sockmap/sockhash from a BPF tracing program today.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+bc922f476bd65abbd466@syzkaller.appspotmail.com
Reported-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=d4066896495db380182e
Closes: https://syzkaller.appspot.com/bug?extid=bc922f476bd65abbd466
Link: https://lore.kernel.org/bpf/20240402104621.1050319-1-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit 6ebfad33161afacb3e1e59ed1c2feefef70f9f97 ]
ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
syzbot reported:
BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt
write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
do_sock_setsockopt net/socket.c:2311 [inline]
__sys_setsockopt+0x1d8/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
do_syscall_64+0xd3/0x1d0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
xmit_one net/core/dev.c:3527 [inline]
dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
__dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
worker_thread+0x526/0x730 kernel/workqueue.c:3416
kthread+0x1d1/0x210 kernel/kthread.c:388
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G W 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Fixes: fa788d986a3a ("packet: add sockopt to ignore outgoing packets")
Reported-by: syzbot+c669c1136495a2e7c31f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CANn89i+Z7MfbkBLOv=p7KZ7=K1rKHO4P1OL5LYDCtBiyqsa9oQ@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efd402537673f9951992aea4ef0f5ff51d858f4b ]
__sock_diag_cmd() and sock_diag_bind() read sock_diag_handlers[family]
without a lock held.
Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.
Fixes: 8ef874bfc729 ("sock_diag: Move the sock_ code to net/core/")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Commit a4104821ad651d8a0b374f0b2474c345bbb42f82 upstream.
Since we no longer allow sending io_uring fds over SCM_RIGHTS, move to
using io_is_uring_fops() to detect whether this is a io_uring fd or not.
With that done, kill off io_uring_get_socket() as nobody calls it
anymore.
This is in preparation to yanking out the rest of the core related to
unix gc with io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 743ad091fb46e622f1b690385bb15e3cd3daf874 ]
In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 upstream.
Once again syzbot is able to crash the kernel in skb_segment() [1]
GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :
mss = mss * partial_segs;
65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.
Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit e5dc5afff62f3e97e86c3643ec9fcad23de4f2d3 ]
We are seeing cases where neigh_cleanup_and_release() is called by
neigh_forced_gc() many times in a row with preemption turned off.
When running on a low powered CPU at a low CPU frequency, this has
been measured to keep preemption off for ~10 ms. That's not great on a
system with HZ=1000 which expects tasks to be able to schedule in
with ~1ms latency.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
commit af6d10345ca76670c1b7c37799f0d5576ccef277 upstream.
In ip6_dst_gc() replace:
if (entries > gc_thresh)
With:
if (entries > ops->gc_thresh)
Sending Ipv6 packets in a loop via a raw socket triggers an issue where a
route is cloned by ip6_rt_cache_alloc() for each packet sent. This quickly
consumes the Ipv6 max_size threshold which defaults to 4096 resulting in
these warnings:
[1] 99.187805] dst_alloc: 7728 callbacks suppressed
[2] Route cache is full: consider increasing sysctl net.ipv6.route.max_size.
.
.
[300] Route cache is full: consider increasing sysctl net.ipv6.route.max_size.
When this happens the packet is dropped and sendto() gets a network is
unreachable error:
remaining pkt 200557 errno 101
remaining pkt 196462 errno 101
.
.
remaining pkt 126821 errno 101
Implement David Aherns suggestion to remove max_size check seeing that Ipv6
has a GC to manage memory usage. Ipv4 already does not check max_size.
Here are some memory comparisons for Ipv4 vs Ipv6 with the patch:
Test by running 5 instances of a program that sends UDP packets to a raw
socket 5000000 times. Compare Ipv4 and Ipv6 performance with a similar
program.
Ipv4:
Before test:
MemFree: 29427108 kB
Slab: 237612 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0
xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0
ip_dst_cache 2881 3990 192 42 2 : tunables 0 0 0
During test:
MemFree: 29417608 kB
Slab: 247712 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0
xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0
ip_dst_cache 44394 44394 192 42 2 : tunables 0 0 0
After test:
MemFree: 29422308 kB
Slab: 238104 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0
xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0
ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
Ipv6 with patch:
Errno 101 errors are not observed anymore with the patch.
Before test:
MemFree: 29422308 kB
Slab: 238104 kB
ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0
xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0
ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
During Test:
MemFree: 29431516 kB
Slab: 240940 kB
ip6_dst_cache 11980 12064 256 32 2 : tunables 0 0 0
xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0
ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
After Test:
MemFree: 29441816 kB
Slab: 238132 kB
ip6_dst_cache 1902 2432 256 32 2 : tunables 0 0 0
xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0
ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0
Tested-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230112012532.311021-1-jmaxwell37@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf86a086a18095e33e0637cb78cda1fcf5280852 upstream.
percpu_counter_add() uses a default batch size which is quite big
on platforms with 256 cpus. (2*256 -> 512)
This means dst_entries_get_fast() can be off by +/- 2*(nr_cpus^2)
(131072 on servers with 256 cpus)
Reduce the batch size to something more reasonable, and
add logic to ip6_dst_gc() to call dst_entries_get_slow()
before calling the _very_ expensive fib6_run_gc() function.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 382a32018b74f407008615e0e831d05ed28e81cd ]
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/netdev/6a7281bf-bc4a-4f75-bb88-7011908ae471@app.fastmail.com/
Signed-off-by: Thomas Lange <thomas@corelatus.se>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104085744.49164-1-thomas@corelatus.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 24ab059d2ebd62fdccc43794796f6ffbabe49ebc ]
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d155dfdf50efc2b0793bce93c06d1a5b23d0877 ]
In bug report [0] a warning in r8169 driver was reported that was
caused by an invalid GSO SKB (gso_type was 0). See [1] for a discussion
about this issue. Still the origin of the invalid GSO SKB isn't clear.
It shouldn't be a network drivers task to check for invalid GSO SKB's.
Also, even if issue [0] can be fixed, we can't be sure that a
similar issue doesn't pop up again at another place.
Therefore let gso_features_check() check for such invalid GSO SKB's.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209423
[1] https://www.spinics.net/lists/netdev/msg690794.html
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/97c78d21-7f0b-d843-df17-3589f224d2cf@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
commit e03781879a0d524ce3126678d50a80484a513c4b upstream.
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 705318a99a138c29a512a72c3e0043b3cd7f55f4 upstream.
File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.
Cc: <stable@vger.kernel.org>
Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb9aefde5bbaf6c168c77ba635c155b4980c2287 ]
Curr pointer should be updated when the sg structure is shifted.
Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit eb44ad4e635132754bfbcb18103f1dcb7058aedd ]
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit a9beb7e81bcb876615e1fbb3c07f3f9dba69831f ]
1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
can be written from sysfs.
2) tbl->last_flush is read locklessly from neigh_alloc()
3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()
4) neightbl_fill_info() reads cpu stats that can be changed concurrently.
Fixes: c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1d30162f35c7a73fc2f8cdcdcdbd690bedb99d1a upstream.
Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.
2) Similarly to the F_IPSEC flag.
3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 99c6d3d20d62 ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit 25563b581ba3a1f263a00e8c9a97f5e7363be6fd ]
While looking at a related syzbot report involving neigh_periodic_work(),
I found that I forgot to add an annotation when deleting an
RCU protected item from a list.
Readers use rcu_deference(*np), we need to use either
rcu_assign_pointer() or WRITE_ONCE() on writer side
to prevent store tearing.
I use rcu_assign_pointer() to have lockdep support,
this was the choice made in neigh_flush_dev().
Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 633d76ad01ad0321a1ace3e5cc4fed06753d7ac4 ]
The checks in question were introduced by:
commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.
Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.
It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.
Eventually, this limitation was lifted by:
commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance")
Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").
Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.
So remove the checks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b192812905e4b134f7b7994b079eb647e9d2d37e ]
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().
Let's use READ_ONCE() for sk_err as well.
Note that the writer side is marked by commit cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afe8764f76346ba838d4f162883e23d2fcfaa90e ]
sk->sk_shutdown is changed under unix_state_lock(sk), but
unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly.
sock_alloc_send_pskb
`- sock_wait_for_wmem
Let's use READ_ONCE() there.
Note that the writer side was marked by commit e1d09c2c2f57 ("af_unix:
Fix data races around sk->sk_shutdown.").
BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock
write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1053
__sock_release+0x7d/0x170 net/socket.c:654
sock_close+0x19/0x30 net/socket.c:1386
__fput+0x2a3/0x680 fs/file_table.c:384
____fput+0x15/0x20 fs/file_table.c:412
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0:
sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767
unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
value changed: 0x00 -> 0x03
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3e0fdf71bbe031de845e8e08ed7fba49f9c702c ]
syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()
We have many more similar issues to fix.
WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695
Fixes: 7ad6848c7e81 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a5e2151ff9d5852d0ababbbcaeebd9646af9c8d9 upstream.
__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db875671
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.
As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.
Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.
Fixes: eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457
Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ea35288c83b3d501a88bc17f2df8f176b5cc96f upstream.
Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.
[ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26
[ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[ 194.021892] Call Trace:
[ 194.027422] <TASK>
[ 194.072861] tcp_gso_segment+0x107/0x540
[ 194.082031] inet_gso_segment+0x15c/0x3d0
[ 194.090783] skb_mac_gso_segment+0x9f/0x110
[ 194.095016] __skb_gso_segment+0xc1/0x190
[ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem]
[ 194.107071] dev_qdisc_enqueue+0x16/0x70
[ 194.110884] __dev_queue_xmit+0x63b/0xb30
[ 194.121670] bond_start_xmit+0x159/0x380 [bonding]
[ 194.128506] dev_hard_start_xmit+0xc3/0x1e0
[ 194.131787] __dev_queue_xmit+0x8a0/0xb30
[ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan]
[ 194.141477] dev_hard_start_xmit+0xc3/0x1e0
[ 194.144622] sch_direct_xmit+0xe3/0x280
[ 194.147748] __dev_queue_xmit+0x54a/0xb30
[ 194.154131] tap_get_user+0x2a8/0x9c0 [tap]
[ 194.157358] tap_sendmsg+0x52/0x8e0 [tap]
[ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[ 194.173631] handle_tx+0xcd/0xe0 [vhost_net]
[ 194.176959] vhost_worker+0x76/0xb0 [vhost]
[ 194.183667] kthread+0x118/0x140
[ 194.190358] ret_from_fork+0x1f/0x30
[ 194.193670] </TASK>
In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.
Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 29b22badb7a84b783e3a4fffca16f7768fb31205 ]
BPF encap ops can return different types of positive values, such like
NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function
skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return
values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in
ip(6)_finish_output2. When this happens, skbs that have been freed would
continue to the neighbor subsystem, causing use-after-free bug and
kernel crashes.
To fix the incorrect behavior, skb_do_redirect return values can be
simply discarded, the same as tc-egress behavior. On the other hand,
bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU
information. Thus convert its return values to avoid the conflict with
LWTUNNEL_XMIT_CONTINUE.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/0d2b878186cfe215fec6b45769c1cd0591d3628d.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
# Conflicts:
# include/linux/wait.h
|
|
commit 30188bd7838c16a98a520db1fe9df01ffc6ed368 upstream.
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Fix by rejecting negative ifindexes.
[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
<TASK>
register_netdevice+0x69a/0x1490 net/core/dev.c:10081
br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
__rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:728 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:751
____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
__sys_sendmsg+0x117/0x1e0 net/socket.c:2621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f534f6581ec084fe94d6759f7672bd009794b07e ]
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d0c88e84e483982067a82073f6125490ddf3614 ]
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e013 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 13d2618b48f15966d1adfe1ff6a1985f5eef40ba ]
Disabling preemption in sock_map_sk_acquire conflicts with GFP_ATOMIC
allocation later in sk_psock_init_link on PREEMPT_RT kernels, since
GFP_ATOMIC might sleep on RT (see bpf: Make BPF and PREEMPT_RT co-exist
patchset notes for details).
This causes calling bpf_map_update_elem on BPF_MAP_TYPE_SOCKMAP maps to
BUG (sleeping function called from invalid context) on RT kernels.
preempt_disable was introduced together with lock_sk and rcu_read_lock
in commit 99ba2b5aba24e ("bpf: sockhash, disallow bpf_tcp_close and update
in parallel"), probably to match disabled migration of BPF programs, and
is no longer necessary.
Remove preempt_disable to fix BUG in sock_map_update_common on RT.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/20200224140131.461979697@linutronix.de/
Fixes: 99ba2b5aba24 ("bpf: sockhash, disallow bpf_tcp_close and update in parallel")
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230728064411.305576-1-tglozar@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5f0d2dd3c2faa671711dac6d3ff3cef307bcfe3 ]
In a prior commit I forgot that sk_getsockopt() reads
sk->sk_ll_usec without holding a lock.
Fixes: 0dbffbb5335a ("net: annotate data race around sk_ll_usec")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11695c6e966b0ec7ed1d16777d294cef865a5c91 ]
sk_getsockopt() runs locklessly, thus we need to annotate the read
of sk->sk_peek_off.
While we are at it, add corresponding annotations to sk_set_peek_off()
and unix_set_peek_off().
Fixes: b9bb53f3836f ("sock: convert sk_peek_offset functions to WRITE_ONCE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4b553253091cafe9ec38994acf42795e073bef5 ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvbuf locklessly.
Fixes: ebb3b78db7bf ("tcp: annotate sk->sk_rcvbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74bc084327c643499474ba75df485607da37dd6e ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_sndbuf locklessly.
Fixes: e292f05e0df7 ("tcp: annotate sk->sk_sndbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6d12bdb435d23ff6c1890c852d85408a2f496ee ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvlowat locklessly.
Fixes: eac66402d1c3 ("net: annotate sk->sk_rcvlowat lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea7f45ef77b39e72244d282e47f6cb1ef4135cd2 ]
sk_getsockopt() runs locklessly. This means sk->sk_max_pacing_rate
can be read while other threads are changing its value.
Fixes: 62748f32d501 ("net: introduce SO_MAX_PACING_RATE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d73ef2d69c0dba5f5a1cb9600045c873bab1fb7f ]
There are totally 9 ndo_bridge_setlink handlers in the current kernel,
which are 1) bnxt_bridge_setlink, 2) be_ndo_bridge_setlink 3)
i40e_ndo_bridge_setlink 4) ice_bridge_setlink 5)
ixgbe_ndo_bridge_setlink 6) mlx5e_bridge_setlink 7)
nfp_net_bridge_setlink 8) qeth_l2_bridge_setlink 9) br_setlink.
By investigating the code, we find that 1-7 parse and use nlattr
IFLA_BRIDGE_MODE but 3 and 4 forget to do the nla_len check. This can
lead to an out-of-attribute read and allow a malformed nlattr (e.g.,
length 0) to be viewed as a 2 byte integer.
To avoid such issues, also for other ndo_bridge_setlink handlers in the
future. This patch adds the nla_len check in rtnl_bridge_setlink and
does an early error return if length mismatches. To make it works, the
break is removed from the parsing for IFLA_BRIDGE_FLAGS to make sure
this nla_for_each_nested iterates every attribute.
Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230726075314.1059224-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
Bruce Ashfield
Jakub Sitnicki
Eric Dumazet
Jens Axboe
Lin Ma
Judy Hsiao
Jon Maxwell
Thomas Lange
Heiner Kallweit
Ido Schimmel
Pavel Begunkov
John Fastabend
Gavrilov Ilia
Jiri Pirko
Kuniyuki Iwashima
Quan Tian
Mohamed Khalfella
Yan Zhai
Jakub Kicinski
Abel Wu
Tomas Glozar