aboutsummaryrefslogtreecommitdiffstats
path: root/net/core/devlink.c
AgeCommit message (Collapse)Author
2023-09-23devlink: remove reload failed checks in params get/set callbacksJiri Pirko
[ Upstream commit 633d76ad01ad0321a1ace3e5cc4fed06753d7ac4 ] The checks in question were introduced by: commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload"). That fixed an issue of reload with mlxsw driver. Back then, that was a valid fix, because there was a limitation in place that prevented drivers from registering/unregistering params when devlink instance was registered. It was possible to do the fix differently by changing drivers to register/unregister params in appropriate places making sure the ops operate only on memory which is allocated and initialized. But that, as a dependency, would require to remove the limitation mentioned above. Eventually, this limitation was lifted by: commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance") Also, the alternative fix (which also fixed another issue) was done by: commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code"). Therefore, the checks are no longer relevant. Each driver should make sure to have the params registered only when the memory the ops are working with is allocated and initialized. So remove the checks. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27devlink: report devlink_port_type_warn source devicePetr Oros
[ Upstream commit a52305a81d6bb74b90b400dfa56455d37872fe4b ] devlink_port_type_warn is scheduled for port devlink and warning when the port type is not set. But from this warning it is not easy found out which device (driver) has no devlink port set. [ 3709.975552] Type was not set for devlink port. [ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20 [ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm [ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse [ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1 [ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022 [ 3710.108437] Workqueue: events devlink_port_type_warn [ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20 [ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87 [ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282 [ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027 [ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8 [ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18 [ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600 [ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905 [ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000 [ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0 [ 3710.108456] PKRU: 55555554 [ 3710.108457] Call Trace: [ 3710.108458] <TASK> [ 3710.108459] process_one_work+0x1e2/0x3b0 [ 3710.108466] ? rescuer_thread+0x390/0x390 [ 3710.108468] worker_thread+0x50/0x3a0 [ 3710.108471] ? rescuer_thread+0x390/0x390 [ 3710.108473] kthread+0xdd/0x100 [ 3710.108477] ? kthread_complete_and_exit+0x20/0x20 [ 3710.108479] ret_from_fork+0x1f/0x30 [ 3710.108485] </TASK> [ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]--- After patch: [ 402.473064] ice 0000:41:00.0: Type was not set for devlink port. [ 402.473064] ice 0000:41:00.1: Type was not set for devlink port. Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230615095447.8259-1-poros@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25devlink: Fix use-after-free after a failed reloadIdo Schimmel
commit 6b4db2e528f650c7fb712961aac36455468d5902 upstream. After a failed devlink reload, devlink parameters are still registered, which means user space can set and get their values. In the case of the mlxsw "acl_region_rehash_interval" parameter, these operations will trigger a use-after-free [1]. Fix this by rejecting set and get operations while in the failed state. Return the "-EOPNOTSUPP" error code which does not abort the parameters dump, but instead causes it to skip over the problematic parameter. Another possible fix is to perform these checks in the mlxsw parameter callbacks, but other drivers might be affected by the same problem and I am not aware of scenarios where these stricter checks will cause a regression. [1] mlxsw_spectrum3 0000:00:10.0: Port 125: Failed to register netdev mlxsw_spectrum3 0000:00:10.0: Failed to create ports ================================================================== BUG: KASAN: use-after-free in mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904 Read of size 4 at addr ffff8880099dcfd8 by task kworker/u4:4/777 CPU: 1 PID: 777 Comm: kworker/u4:4 Not tainted 5.19.0-rc7-custom-126601-gfe26f28c586d #1 Hardware name: QEMU MSN4700, BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x92/0xbd lib/dump_stack.c:106 print_address_description mm/kasan/report.c:313 [inline] print_report.cold+0x5e/0x5cf mm/kasan/report.c:429 kasan_report+0xb9/0xf0 mm/kasan/report.c:491 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report_generic.c:306 mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904 mlxsw_sp_acl_region_rehash_intrvl_get+0x49/0x60 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c:1106 mlxsw_sp_params_acl_region_rehash_intrvl_get+0x33/0x80 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3854 devlink_param_get net/core/devlink.c:4981 [inline] devlink_nl_param_fill+0x238/0x12d0 net/core/devlink.c:5089 devlink_param_notify+0xe5/0x230 net/core/devlink.c:5168 devlink_ns_change_notify net/core/devlink.c:4417 [inline] devlink_ns_change_notify net/core/devlink.c:4396 [inline] devlink_reload+0x15f/0x700 net/core/devlink.c:4507 devlink_pernet_pre_exit+0x112/0x1d0 net/core/devlink.c:12272 ops_pre_exit_list net/core/net_namespace.c:152 [inline] cleanup_net+0x494/0xc00 net/core/net_namespace.c:582 process_one_work+0x9fc/0x1710 kernel/workqueue.c:2289 worker_thread+0x675/0x10b0 kernel/workqueue.c:2436 kthread+0x30c/0x3d0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> The buggy address belongs to the physical page: page:ffffea0000267700 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99dc flags: 0x100000000000000(node=0|zone=1) raw: 0100000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880099dce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8880099dcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8880099dcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8880099dd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8880099dd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-08devlink: Hold rtnl lock while reading netdev attributesParav Pandit
[ Upstream commit b187c9b4178b87954dbc94e78a7094715794714f ] A netdevice of a devlink port can be moved to different net namespace than its parent devlink instance. This scenario occurs when devlink reload is not used. When netdevice is undergoing migration to net namespace, its ifindex and name may change. In such use case, devlink port query may read stale netdev attributes. Fix it by reading them under rtnl lock. Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24devlink: Add missing genlmsg_cancel() in devlink_nl_sb_port_pool_fill()Wang Hai
[ Upstream commit 849920c703392957f94023f77ec89ca6cf119d43 ] If sb_occ_port_pool_get() failed in devlink_nl_sb_port_pool_fill(), msg should be canceled by genlmsg_cancel(). Fixes: df38dafd2559 ("devlink: implement shared buffer occupancy monitoring interface") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201113111622.11040-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01devlink: Fix reporter's recovery conditionAya Levin
[ Upstream commit bea0c5c942d3b4e9fb6ed45f6a7de74c6b112437 ] Devlink health core conditions the reporter's recovery with the expiration of the grace period. This is not relevant for the first recovery. Explicitly demand that the grace period will only apply to recoveries other than the first. Fixes: c8e1da0bf923 ("devlink: Add health report functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-14devlink: fix return value after hitting end in region readJakub Kicinski
[ Upstream commit 610a9346c138b9c2c93d38bf5f3728e74ae9cbd5 ] Commit d5b90e99e1d5 ("devlink: report 0 after hitting end in region read") fixed region dump, but region read still returns a spurious error: $ devlink region read netdevsim/netdevsim1/dummy snapshot 0 addr 0 len 128 0000000000000000 a6 f4 c4 1c 21 35 95 a6 9d 34 c3 5b 87 5b 35 79 0000000000000010 f3 a0 d7 ee 4f 2f 82 7f c6 dd c4 f6 a5 c3 1b ae 0000000000000020 a4 fd c8 62 07 59 48 03 70 3b c7 09 86 88 7f 68 0000000000000030 6f 45 5d 6d 7d 0e 16 38 a9 d0 7a 4b 1e 1e 2e a6 0000000000000040 e6 1d ae 06 d6 18 00 85 ca 62 e8 7e 11 7e f6 0f 0000000000000050 79 7e f7 0f f3 94 68 bd e6 40 22 85 b6 be 6f b1 0000000000000060 af db ef 5e 34 f0 98 4b 62 9a e3 1b 8b 93 fc 17 devlink answers: Invalid argument 0000000000000070 61 e8 11 11 66 10 a5 f7 b1 ea 8d 40 60 53 ed 12 This is a minimal fix, I'll follow up with a restructuring so we don't have two checks for the same condition. Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18devlink: validate length of region addr/lenJakub Kicinski
[ Upstream commit ff3b63b8c299b73ac599b120653b47e275407656 ] DEVLINK_ATTR_REGION_CHUNK_ADDR and DEVLINK_ATTR_REGION_CHUNK_LEN lack entries in the netlink policy. Corresponding nla_get_u64()s may read beyond the end of the message. Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18devlink: validate length of param valuesJakub Kicinski
[ Upstream commit 8750939b6ad86abc3f53ec8a9683a1cded4a5654 ] DEVLINK_ATTR_PARAM_VALUE_DATA may have different types so it's not checked by the normal netlink policy. Make sure the attribute length is what we expect. Fixes: e3b7ca18ad7b ("devlink: Add param set command") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11devlink: report 0 after hitting end in region readJacob Keller
[ Upstream commit d5b90e99e1d51b7b5d2b74fbc4c2db236a510913 ] commit fdd41ec21e15 ("devlink: Return right error code in case of errors for region read") modified the region read code to report errors properly in unexpected cases. In the case where the start_offset and ret_offset match, it unilaterally converted this into an error. This causes an issue for the "dump" version of the command. In this case, the devlink region dump will always report an invalid argument: 000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff devlink answers: Invalid argument 000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff This occurs because the expected flow for the dump is to return 0 after there is no further data. The simplest fix would be to stop converting the error code to -EINVAL if start_offset == ret_offset. However, avoid unnecessary work by checking for when start_offset is larger than the region size and returning 0 upfront. Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23devlink: Wait longer before warning about unset port typeIdo Schimmel
commit 4c582234ab3948d08a24c82eb1e00436aabacbc6 upstream. The commit cited below causes devlink to emit a warning if a type was not set on a devlink port for longer than 30 seconds to "prevent misbehavior of drivers". This proved to be problematic when unregistering the backing netdev. The flow is always: devlink_port_type_clear() // schedules the warning unregister_netdev() // blocking devlink_port_unregister() // cancels the warning The call to unregister_netdev() can block for long periods of time for various reasons: RTNL lock is contended, large amounts of configuration to unroll following dismantle of the netdev, etc. This results in devlink emitting a warning despite the driver behaving correctly. In emulated environments (of future hardware) which are usually very slow, the warning can also be emitted during port creation as more than 30 seconds can pass between the time the devlink port is registered and when its type is set. In addition, syzbot has hit this warning [1] 1974 times since 07/11/19 without being able to produce a reproducer. Probably because reproduction depends on the load or other bugs (e.g., RTNL not being released). To prevent bogus warnings, increase the timeout to 1 hour. [1] https://syzkaller.appspot.com/bug?id=e99b59e9c024a666c9f7450dc162a4b74d09d9cb Fixes: 136bf27fc0e9 ("devlink: add warning in case driver does not set port type") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: syzbot+b0a18ed7b08b735d2f41@syzkaller.appspotmail.com Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-11devlink: Add method for time-stamp on reporter's dumpAya Levin
When setting the dump's time-stamp, use ktime_get_real in addition to jiffies. This simplifies the user space implementation and bypasses some inconsistent behavior with translating jiffies to current time. The time taken is transformed into nsec, to comply with y2038 issue. Fixes: c8e1da0bf923 ("devlink: Add health report functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09devlink: disallow reload operation during device cleanupJiri Pirko
There is a race between driver code that does setup/cleanup of device and devlink reload operation that in some drivers works with the same code. Use after free could we easily obtained by running: while true; do echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind devlink dev reload pci/0000:00:10.0 & echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind done Fix this by enabling reload only after setup of device is complete and disabling it at the beginning of the cleanup process. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 2d8dc5bbf4e7 ("devlink: Add support for reload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01devlink: Fix error handling in param and info_get dumpit cbVasundhara Volam
If any of the param or info_get op returns error, dumpit cb is skipping to dump remaining params or info_get ops for all the drivers. Fix to not return if any of the param/info_get op returns error as not supported and continue to dump remaining information. v2: Modify the patch to return error, except for params/info_get op that return -EOPNOTSUPP as suggested by Andrew Lunn. Also, modify commit message to reflect the same. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13net: devlink: move reload fail indication to devlink core and expose to userJiri Pirko
Currently the fact that devlink reload failed is stored in drivers. Move this flag into devlink core. Also, expose it to the user. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13net: devlink: split reload op into twoJiri Pirko
In order to properly implement failure indication during reload, split the reload op into two ops, one for down phase and one for up phase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10devlink: add 'reset_dev_on_drv_probe' paramDirk van der Merwe
Add the 'reset_dev_on_drv_probe' devlink parameter, controlling the device reset policy on driver probe. This parameter is useful in conjunction with the existing 'fw_load_policy' parameter. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31devlink: Use switch-case instead of if-elseParav Pandit
Make core more readable with switch-case for various port flavours. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31devlink: Make port index data type as unsigned intParav Pandit
Devlink port index attribute is returned to users as u32 through netlink response. Change index data type from 'unsigned' to 'unsigned int' to avoid below checkpatch.pl warning. WARNING: Prefer 'unsigned int' to bare use of 'unsigned' 81: FILE: include/net/devlink.h:81: + unsigned index; Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17devlink: Add generic packet traps and groupsIdo Schimmel
Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17devlink: Add packet trap infrastructureIdo Schimmel
Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13net: devlink: remove redundant rtnl lock assertVlad Buslov
It is enough for caller of devlink_compat_switch_id_get() to hold the net device to guarantee that devlink port is not destroyed concurrently. Remove rtnl lock assertion and modify comment to warn user that they must hold either rtnl lock or reference to net device. This is necessary to accommodate future implementation of rtnl-unlocked TC offloads driver callbacks. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13devlink: send notifications for deleted snapshots on region destroyJiri Pirko
Currently the notifications for deleted snapshots are sent only in case user deletes a snapshot manually. Send the notifications in case region is destroyed too. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-09devlink: remove pointless data_len arg from region snapshot createJiri Pirko
The size of the snapshot has to be the same as the size of the region, therefore no need to pass it again during snapshot creation. Remove the arg and use region->size instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09devlink: Introduce PCI VF port flavour and port attributeParav Pandit
In an eswitch, PCI VF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with VF, and its representor netdevice, introduce a PCI VF port flavour. When devlink port flavour is PCI VF, fill up PCI VF attributes of the port. Extend port name creation using PCI PF and VF number scheme on best effort basis, so that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0 pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09devlink: Introduce PCI PF port flavour and port attributeParav Pandit
In an eswitch, PCI PF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with PF and a representor netdevice, introduce a PCI PF port flavour and port attriute. When devlink port flavour is PCI PF, fill up PCI PF attributes of the port. Extend port name creation using PCI PF number on best effort basis. So that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09devlink: Return physical port fields only for applicable port flavoursParav Pandit
Physical port number and split group fields are applicable only to physical port flavours such as PHYSICAL, CPU and DSA. Hence limit returning those values in netlink response to such port flavours. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09devlink: Refactor physical port attributesParav Pandit
To support additional devlink port flavours and to support few common and few different port attributes, move physical port attributes to a different structure. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Misc updates from mlx5-next branch: 1) E-Switch vport metadata support for source vport matching 2) Convert mkey_table to XArray 3) Shared IRQs and to use single IRQ for all async EQs Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-16net/mlx5: Declare more strictly devlink encap modeLeon Romanovsky
Devlink has UAPI declaration for encap mode, so there is no need to be loose on the data get/set by drivers. Update call sites to use enum devlink_eswitch_encap_mode instead of plain u8. Suggested-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2019-06-13devlink: Hang reporter's dump method on a dumpit cbAya Levin
The devlink health reporter provides a dump method on an error. Dump may contain a large amount of data, in this case doit cb isn't sufficient. This is because the user side is blocking and doesn't allow draining of the socket until the socket runs out of buffers. Using dumpit cb is the correct way to go. Please note that thankfully the dump op is not yet implemented in any driver and therefore this change is not breaking userspace. Fixes: 35455e23e6f3 ("devlink: Add health dump {get,clear} commands") Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04devlink: allow driver to update progress of flash updateJiri Pirko
Introduce a function to be called from drivers during flash. It sends notification to userspace about flash update progress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23devlink: add warning in case driver does not set port typeJiri Pirko
Prevent misbehavior of drivers who would not set port type for longer period of time. Drivers should always set port type. Do WARN if that happens. Note that it is perfectly fine to temporarily not have the type set, during initialization and port type change. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01devlink: Change devlink health locking mechanismMoshe Shemesh
The devlink health reporters create/destroy and user commands currently use the devlink->lock as a locking mechanism. Different reporters have different rules in the driver and are being created/destroyed during different stages of driver load/unload/running. So during execution of a reporter recover the flow can go through another reporter's destroy and create. Such flow leads to deadlock trying to lock a mutex already held. With the new locking mechanism the different reporters share mutex lock only to protect access to shared reporters list. Added refcount per reporter, to protect the reporters from destroy while being used. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22net: devlink: Add extack to shared buffer operationsIdo Schimmel
Add extack to shared buffer set operations, so that meaningful error messages could be propagated to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: devlink: add warning for ndo_get_port_parent_id set when not neededJiri Pirko
Currently if the driver registers devlink port instance, he should set the devlink port attributes as well. Then the devlink core is able to obtain switch id itself, no need for driver to implement the ndo. Once all drivers will implement devlink port registration, this ndo should be removed. This warning guides new drivers to do things as they should be done. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: devlink: introduce devlink_compat_switch_id_get() helperJiri Pirko
Introduce devlink_compat_switch_id_get() helper which fills up switch_id according to passed netdev pointer. Call it directly from dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id is not defined for given netdev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: devlink: extend port attrs for switch IDJiri Pirko
Extend devlink_port_attrs_set() to pass switch ID for ports which are part of switch and store it in port attrs. For other ports, this is NULL. Note that this allows the driver to group devlink ports into one or more switches according to the actual topology. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: devlink: add warning for ndo_get_phys_port_name set when not neededJiri Pirko
Currently if the driver registers devlink port instance, it should set the devlink port attributes as well. Then the devlink core is able to obtain physical port name itself, no need for driver to implement the ndo. Once all drivers will implement devlink port registration, this ndo should be removed. This warning guides new drivers to do things as they should be done. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: devlink: remove unused devlink_port_get_phys_port_name() functionJiri Pirko
Now it is unused, remove it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: devlink: introduce devlink_compat_phys_port_name_get()Jiri Pirko
Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2019-03-26net: devlink: skip info_get op call if it is not defined in dumpitJiri Pirko
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24net: devlink: add port type spinlockJiri Pirko
Add spinlock to protect port type and type_dev pointer consistency. Without that, userspace may see inconsistent type and type_dev combinations. Signed-off-by: Jiri Pirko <jiri@mellanox.com> v1->v2: - rebased Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24net: devlink: warn on setting type on unregistered portJiri Pirko
Port needs to be registered first before the type is set. Warn and bail-out in case it is not. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-05 07:33:25 +0000