summaryrefslogtreecommitdiffstats
path: root/kernel/dma
AgeCommit message (Collapse)Author
2020-06-04dma-direct: fix data truncation in dma_direct_get_required_mask()Kishon Vijay Abraham I
commit cdcda0d1f8f4ab84efe7cd9921c98364398aefd7 upstream. The upper 32-bit physical address gets truncated inadvertently when dma_direct_get_required_mask() invokes phys_to_dma_direct(). This results in dma_addressing_limited() return incorrect value when used in platforms with LPAE enabled. Fix it here by explicitly type casting 'max_pfn' to phys_addr_t in order to prevent overflow of intermediate value while evaluating '(max_pfn - 1) << PAGE_SHIFT'. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01dma-debug: fix displaying of dma allocation typeGrygorii Strashko
commit 9bb50ed7470944238ec8e30a94ef096caf9056ee upstream. The commit 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update type2name string table. This causes incorrect displaying of dma allocation type. Fix it by removing "page" string from type2name string table and switch to use named initializers. Before (dma_alloc_coherent()): k3-ringacc 4b800000.ringacc: scather-gather idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable k3-ringacc 4b800000.ringacc: scather-gather idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable After: k3-ringacc 4b800000.ringacc: coherent idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable k3-ringacc 4b800000.ringacc: coherent idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable Fixes: 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-01dma-coherent: fix integer overflow in the reserved-memory dma allocationKevin Grandemange
commit 286c21de32b904131f8cf6a36ce40b8b0c9c5da3 upstream. pageno is an int and the PAGE_SHIFT shift is done on an int, overflowing if the memory is bigger than 2G This can be reproduced using for example a reserved-memory of 4G reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; reserved_dma: buffer@0 { compatible = "shared-dma-pool"; no-map; reg = <0x5 0x00000000 0x1 0x0>; }; }; Signed-off-by: Kevin Grandemange <kevin.grandemange@allegrodvt.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-07dma-direct: don't check swiotlb=force in dma_direct_map_resourceChristoph Hellwig
commit 4268ac6ae5870af10a7417b22990d615f72f77e2 upstream. When mapping resources we can't just use swiotlb ram for bounce buffering. Switch to a direct dma_capable check instead. Fixes: cfced786969c ("dma-mapping: remove the default map_resource implementation") Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-07dma-mapping: fix handling of dma-ranges for reserved memory (again)Vladimir Murzin
commit a445e940ea686fc60475564009821010eb213be3 upstream. Daniele reported that issue previously fixed in c41f9ea998f3 ("drivers: dma-coherent: Account dma_pfn_offset when used with device tree") reappear shortly after 43fc509c3efb ("dma-coherent: introduce interface for default DMA pool") where fix was accidentally dropped. Lets put fix back in place and respect dma-ranges for reserved memory. Fixes: 43fc509c3efb ("dma-coherent: introduce interface for default DMA pool") Reported-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com> Tested-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com> Tested-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-03-07dma-debug: add a schedule point in debug_dma_dump_mappings()Eric Dumazet
commit 9ff6aa027dbb98755f0265695354f2dd07c0d1ce upstream. debug_dma_dump_mappings() can take a lot of cpu cycles : lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump 163435 /sys/kernel/debug/dma-api/dump real 0m0.463s user 0m0.003s sys 0m0.459s Let's add a cond_resched() to avoid holding cpu for too long. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Corentin Labbe <clabbe@baylibre.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2019-09-06dma-direct: don't truncate dma_required_mask to bus addressing capabilitiesLucas Stach
[ Upstream commit d8ad55538abe443919e20e0bb996561bca9cad84 ] The dma required_mask needs to reflect the actual addressing capabilities needed to handle the whole system RAM. When truncated down to the bus addressing capabilities dma_addressing_limited() will incorrectly signal no limitations for devices which are restricted by the bus_dma_mask. Fixes: b4ebe6063204 (dma-direct: implement complete bus_dma_mask handling) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}Christoph Hellwig
[ Upstream commit 66d7780f18eae0232827fcffeaded39a6a168236 ] Check that the pfn returned from arch_dma_coherent_to_pfn refers to a valid page and reject the mmap / get_sgtable requests otherwise. Based on the arm implementation of the mmap and get_sgtable methods. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-06swiotlb: fix phys_addr_t overflow warningArnd Bergmann
[ Upstream commit 9c106119f6538f65bdddb7948a157d90625effa7 ] On architectures that have a larger dma_addr_t than phys_addr_t, the swiotlb_tbl_map_single() function truncates its return code in the failure path, making it impossible to identify the error later, as we compare to the original value: kernel/dma/swiotlb.c:551:9: error: implicit conversion from 'dma_addr_t' (aka 'unsigned long long') to 'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion] return DMA_MAPPING_ERROR; Use an explicit typecast here to convert it to the narrower type, and use the same expression in the error handling later. Fixes: b907e20508d0 ("swiotlb: remove SWIOTLB_MAP_ERROR") Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31dma-remap: Avoid de-referencing NULL atomic_poolFlorian Fainelli
[ Upstream commit 4b4b077cbd0a998aebaa72c199e06b8a4c8dcfee ] With architectures allowing the kernel to be placed almost arbitrarily in memory (e.g.: ARM64), it is possible to have the kernel resides at physical addresses above 4GB, resulting in neither the default CMA area, nor the atomic pool from successfully allocating. This does not prevent specific peripherals from working though, one example is XHCI, which still operates correctly. Trouble comes when the XHCI driver gets suspended and resumed, since we can now trigger the following NPD: [ 12.664170] usb usb1: root hub lost power or was reset [ 12.669387] usb usb2: root hub lost power or was reset [ 12.674662] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 12.682896] pgd = ffffffc1365a7000 [ 12.686386] [00000008] *pgd=0000000136500003, *pud=0000000136500003, *pmd=0000000000000000 [ 12.694897] Internal error: Oops: 96000006 [#1] SMP [ 12.699843] Modules linked in: [ 12.702980] CPU: 0 PID: 1499 Comm: pml Not tainted 4.9.135-1.13pre #51 [ 12.709577] Hardware name: BCM97268DV (DT) [ 12.713736] task: ffffffc136bb6540 task.stack: ffffffc1366cc000 [ 12.719740] PC is at addr_in_gen_pool+0x4/0x48 [ 12.724253] LR is at __dma_free+0x64/0xbc [ 12.728325] pc : [<ffffff80083c0df8>] lr : [<ffffff80080979e0>] pstate: 60000145 [ 12.735825] sp : ffffffc1366cf990 [ 12.739196] x29: ffffffc1366cf990 x28: ffffffc1366cc000 [ 12.744608] x27: 0000000000000000 x26: ffffffc13a8568c8 [ 12.750020] x25: 0000000000000000 x24: ffffff80098f9000 [ 12.755433] x23: 000000013a5ff000 x22: ffffff8009c57000 [ 12.760844] x21: ffffffc13a856810 x20: 0000000000000000 [ 12.766255] x19: 0000000000001000 x18: 000000000000000a [ 12.771667] x17: 0000007f917553e0 x16: 0000000000001002 [ 12.777078] x15: 00000000000a36cb x14: ffffff80898feb77 [ 12.782490] x13: ffffffffffffffff x12: 0000000000000030 [ 12.787899] x11: 00000000fffffffe x10: ffffff80098feb7f [ 12.793311] x9 : 0000000005f5e0ff x8 : 65776f702074736f [ 12.798723] x7 : 6c2062756820746f x6 : ffffff80098febb1 [ 12.804134] x5 : ffffff800809797c x4 : 0000000000000000 [ 12.809545] x3 : 000000013a5ff000 x2 : 0000000000000fff [ 12.814955] x1 : ffffff8009c57000 x0 : 0000000000000000 [ 12.820363] [ 12.821907] Process pml (pid: 1499, stack limit = 0xffffffc1366cc020) [ 12.828421] Stack: (0xffffffc1366cf990 to 0xffffffc1366d0000) [ 12.834240] f980: ffffffc1366cf9e0 ffffff80086004d0 [ 12.842186] f9a0: ffffffc13ab08238 0000000000000010 ffffff80097c2218 ffffffc13a856810 [ 12.850131] f9c0: ffffff8009c57000 000000013a5ff000 0000000000000008 000000013a5ff000 [ 12.858076] f9e0: ffffffc1366cfa50 ffffff80085f9250 ffffffc13ab08238 0000000000000004 [ 12.866021] fa00: ffffffc13ab08000 ffffff80097b6000 ffffffc13ab08130 0000000000000001 [ 12.873966] fa20: 0000000000000008 ffffffc13a8568c8 0000000000000000 ffffffc1366cc000 [ 12.881911] fa40: ffffffc13ab08130 0000000000000001 ffffffc1366cfa90 ffffff80085e3de8 [ 12.889856] fa60: ffffffc13ab08238 0000000000000000 ffffffc136b75b00 0000000000000000 [ 12.897801] fa80: 0000000000000010 ffffff80089ccb92 ffffffc1366cfac0 ffffff80084ad040 [ 12.905746] faa0: ffffffc13a856810 0000000000000000 ffffff80084ad004 ffffff80084b91a8 [ 12.913691] fac0: ffffffc1366cfae0 ffffff80084b91b4 ffffffc13a856810 ffffff80080db5cc [ 12.921636] fae0: ffffffc1366cfb20 ffffff80084b96bc ffffffc13a856810 0000000000000010 [ 12.929581] fb00: ffffffc13a856870 0000000000000000 ffffffc13a856810 ffffff800984d2b8 [ 12.937526] fb20: ffffffc1366cfb50 ffffff80084baa70 ffffff8009932ad0 ffffff800984d260 [ 12.945471] fb40: 0000000000000010 00000002eff0a065 ffffffc1366cfbb0 ffffff80084bafbc [ 12.953415] fb60: 0000000000000010 0000000000000003 ffffff80098fe000 0000000000000000 [ 12.961360] fb80: ffffff80097b6000 ffffff80097b6dc8 ffffff80098c12b8 ffffff80098c12f8 [ 12.969306] fba0: ffffff8008842000 ffffff80097b6dc8 ffffffc1366cfbd0 ffffff80080e0d88 [ 12.977251] fbc0: 00000000fffffffb ffffff80080e10bc ffffffc1366cfc60 ffffff80080e16a8 [ 12.985196] fbe0: 0000000000000000 0000000000000003 ffffff80097b6000 ffffff80098fe9f0 [ 12.993140] fc00: ffffff80097d4000 ffffff8008983802 0000000000000123 0000000000000040 [ 13.001085] fc20: ffffff8008842000 ffffffc1366cc000 ffffff80089803c2 00000000ffffffff [ 13.009029] fc40: 0000000000000000 0000000000000000 ffffffc1366cfc60 0000000000040987 [ 13.016974] fc60: ffffffc1366cfcc0 ffffff80080dfd08 0000000000000003 0000000000000004 [ 13.024919] fc80: 0000000000000003 ffffff80098fea08 ffffffc136577ec0 ffffff80089803c2 [ 13.032864] fca0: 0000000000000123 0000000000000001 0000000500000002 0000000000040987 [ 13.040809] fcc0: ffffffc1366cfd00 ffffff80083a89d4 0000000000000004 ffffffc136577ec0 [ 13.048754] fce0: ffffffc136610cc0 ffffffffffffffea ffffffc1366cfeb0 ffffffc136610cd8 [ 13.056700] fd00: ffffffc1366cfd10 ffffff800822a614 ffffffc1366cfd40 ffffff80082295d4 [ 13.064645] fd20: 0000000000000004 ffffffc136577ec0 ffffffc136610cc0 0000000021670570 [ 13.072590] fd40: ffffffc1366cfd80 ffffff80081b5d10 ffffff80097b6000 ffffffc13aae4200 [ 13.080536] fd60: ffffffc1366cfeb0 0000000000000004 0000000021670570 0000000000000004 [ 13.088481] fd80: ffffffc1366cfe30 ffffff80081b6b20 ffffffc13aae4200 0000000000000000 [ 13.096427] fda0: 0000000000000004 0000000021670570 ffffffc1366cfeb0 ffffffc13a838200 [ 13.104371] fdc0: 0000000000000000 000000000000000a ffffff80097b6000 0000000000040987 [ 13.112316] fde0: ffffffc1366cfe20 ffffff80081b3af0 ffffffc13a838200 0000000000000000 [ 13.120261] fe00: ffffffc1366cfe30 ffffff80081b6b0c ffffffc13aae4200 0000000000000000 [ 13.128206] fe20: 0000000000000004 0000000000040987 ffffffc1366cfe70 ffffff80081b7dd8 [ 13.136151] fe40: ffffff80097b6000 ffffffc13aae4200 ffffffc13aae4200 fffffffffffffff7 [ 13.144096] fe60: 0000000021670570 ffffffc13a8c63c0 0000000000000000 ffffff8008083180 [ 13.152042] fe80: ffffffffffffff1d 0000000021670570 ffffffffffffffff 0000007f917ad9b8 [ 13.159986] fea0: 0000000020000000 0000000000000015 0000000000000000 0000000000040987 [ 13.167930] fec0: 0000000000000001 0000000021670570 0000000000000004 0000000000000000 [ 13.175874] fee0: 0000000000000888 0000440110000000 000000000000006d 0000000000000003 [ 13.183819] ff00: 0000000000000040 ffffff80ffffffc8 0000000000000000 0000000000000020 [ 13.191762] ff20: 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 13.199707] ff40: 0000000000000000 0000007f917553e0 0000000000000000 0000000000000004 [ 13.207651] ff60: 0000000021670570 0000007f91835480 0000000000000004 0000007f91831638 [ 13.215595] ff80: 0000000000000004 00000000004b0de0 00000000004b0000 0000000000000000 [ 13.223539] ffa0: 0000000000000000 0000007fc92ac8c0 0000007f9175d178 0000007fc92ac8c0 [ 13.231483] ffc0: 0000007f917ad9b8 0000000020000000 0000000000000001 0000000000000040 [ 13.239427] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 13.247360] Call trace: [ 13.249866] Exception stack(0xffffffc1366cf7a0 to 0xffffffc1366cf8d0) [ 13.256386] f7a0: 0000000000001000 0000007fffffffff ffffffc1366cf990 ffffff80083c0df8 [ 13.264331] f7c0: 0000000060000145 ffffff80089b5001 ffffffc13ab08130 0000000000000001 [ 13.272275] f7e0: 0000000000000008 ffffffc13a8568c8 0000000000000000 0000000000000000 [ 13.280220] f800: ffffffc1366cf960 ffffffc1366cf960 ffffffc1366cf930 00000000ffffffd8 [ 13.288165] f820: ffffff8009931ac0 4554535953425553 4544006273753d4d 3831633d45434956 [ 13.296110] f840: ffff003832313a39 ffffff800845926c ffffffc1366cf880 0000000000040987 [ 13.304054] f860: 0000000000000000 ffffff8009c57000 0000000000000fff 000000013a5ff000 [ 13.311999] f880: 0000000000000000 ffffff800809797c ffffff80098febb1 6c2062756820746f [ 13.319944] f8a0: 65776f702074736f 0000000005f5e0ff ffffff80098feb7f 00000000fffffffe [ 13.327884] f8c0: 0000000000000030 ffffffffffffffff [ 13.332835] [<ffffff80083c0df8>] addr_in_gen_pool+0x4/0x48 [ 13.338398] [<ffffff80086004d0>] xhci_mem_cleanup+0xc8/0x51c [ 13.344137] [<ffffff80085f9250>] xhci_resume+0x308/0x65c [ 13.349524] [<ffffff80085e3de8>] xhci_brcm_resume+0x84/0x8c [ 13.355174] [<ffffff80084ad040>] platform_pm_resume+0x3c/0x64 [ 13.360997] [<ffffff80084b91b4>] dpm_run_callback+0x5c/0x15c [ 13.366732] [<ffffff80084b96bc>] device_resume+0xc0/0x190 [ 13.372205] [<ffffff80084baa70>] dpm_resume+0x144/0x2cc [ 13.377504] [<ffffff80084bafbc>] dpm_resume_end+0x20/0x34 [ 13.382980] [<ffffff80080e0d88>] suspend_devices_and_enter+0x104/0x704 [ 13.389585] [<ffffff80080e16a8>] pm_suspend+0x320/0x53c [ 13.394881] [<ffffff80080dfd08>] state_store+0xbc/0xe0 [ 13.400094] [<ffffff80083a89d4>] kobj_attr_store+0x14/0x24 [ 13.405655] [<ffffff800822a614>] sysfs_kf_write+0x60/0x70 [ 13.411128] [<ffffff80082295d4>] kernfs_fop_write+0x130/0x194 [ 13.416954] [<ffffff80081b5d10>] __vfs_write+0x60/0x150 [ 13.422254] [<ffffff80081b6b20>] vfs_write+0xc8/0x164 [ 13.427376] [<ffffff80081b7dd8>] SyS_write+0x70/0xc8 [ 13.432412] [<ffffff8008083180>] el0_svc_naked+0x34/0x38 [ 13.437800] Code: 92800173 97f6fb9e 17fffff5 d1000442 (f8408c03) [ 13.444033] ---[ end trace 2effe12f909ce205 ]--- The call path leading to this problem is xhci_mem_cleanup() -> dma_free_coherent() -> dma_free_from_pool() -> addr_in_gen_pool. If the atomic_pool is NULL, we can't possibly have the address in the atomic pool anyway, so guard against that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09Merge tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - remove the already broken support for NULL dev arguments to the DMA API calls - Kconfig tidyups * tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence dma-mapping: remove an unnecessary NULL check x86/dma: Remove the x86_dma_fallback_dev hack dma-mapping: remove leftover NULL device support arm: use a dummy struct device for ISA DMA use of the DMA API pxa3xx-gcu: pass struct device to dma_mmap_coherent gbefb: switch to managed version of the DMA allocator da8xx-fb: pass struct device to DMA API functions parport_ip32: pass struct device to DMA API functions dma: select GENERIC_ALLOCATOR for DMA_REMAP
2019-05-07Merge branch 'stable/for-linus-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Cleanups in the swiotlb code and extra debugfs knobs to help with the field diagnostics" * 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: ensure we have a single callsite for xen_dma_map_page swiotlb-xen: simplify the DMA sync method implementations swiotlb-xen: use ->map_page to implement ->map_sg swiotlb-xen: make instances match their method names swiotlb: save io_tlb_used to local variable before leaving critical section swiotlb: dump used and total slots when swiotlb buffer is full
2019-05-06dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presenceChristoph Hellwig
Add a Kconfig symbol that indicates an architecture provides a arch_dma_prep_coherent implementation, and provide a stub otherwise. This will allow the generic dma-iommu code to use it while still allowing to be built for cache coherent architectures. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2019-04-29dma/debug: Simplify stracktrace retrievalThomas Gleixner
Replace the indirection through struct stack_trace with an invocation of the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094802.248658135@linutronix.de
2019-04-24dma-mapping: remove an unnecessary NULL checkDan Carpenter
We already dereferenced "dev" when we called get_dma_ops() so this NULL check is too late. We're not supposed to pass NULL "dev" pointers to dma_alloc_attrs(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-12swiotlb: save io_tlb_used to local variable before leaving critical sectionDongli Zhang
When swiotlb is full, the kernel would print io_tlb_used. However, the result might be inaccurate at that time because we have left the critical section protected by spinlock. Therefore, we backup the io_tlb_used into local variable before leaving critical section. Fixes: 83ca25948940 ("swiotlb: dump used and total slots when swiotlb buffer is full") Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-04-11dma-debug: only skip one stackframe entryScott Wood
With skip set to 1, I get a traceback like this: [ 106.867637] DMA-API: Mapped at: [ 106.870784] afu_dma_map_region+0x2cd/0x4f0 [dfl_afu] [ 106.875839] afu_ioctl+0x258/0x380 [dfl_afu] [ 106.880108] do_vfs_ioctl+0xa9/0x720 [ 106.883688] ksys_ioctl+0x60/0x90 [ 106.887007] __x64_sys_ioctl+0x16/0x20 With the previous value of 2, afu_dma_map_region was being omitted. I suspect that the code paths have simply changed since the value of 2 was chosen a decade ago, but it's also possible that it varies based on which mapping function was used, compiler inlining choices, etc. In any case, it's best to err on the side of skipping less. Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-10swiotlb: dump used and total slots when swiotlb buffer is fullDongli Zhang
So far the kernel only prints the requested size if swiotlb buffer if full. It is not possible to know whether it is simply an out of buffer, or it is because swiotlb cannot allocate buffer with the requested size due to fragmentation. As 'io_tlb_used' is available since commit 71602fe6d4e9 ("swiotlb: add debugfs to track swiotlb buffer usage"), both 'io_tlb_used' and 'io_tlb_nslabs' are printed when swiotlb buffer is full. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-04-08x86/dma: Remove the x86_dma_fallback_dev hackChristoph Hellwig
Now that we removed support for the NULL device argument in the DMA API, there is no need to cater for that in the x86 code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-08dma-mapping: remove leftover NULL device supportChristoph Hellwig
Most dma_map_ops implementations already had some issues with a NULL device, or did simply crash if one was fed to them. Now that we have cleaned up all the obvious offenders we can stop to pretend we support this mode. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-08dma: select GENERIC_ALLOCATOR for DMA_REMAPClément Leger
When DMA_REMAP is enabled, code in remap.c needs generic allocator. It currently worked since few architectures uses it (arm64, csky) and they both select GENERIC_ALLOCATOR. Select it when using DMA_REMAP to have correct dependencies. Signed-off-by: Clement Leger <clement.leger@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-03-12memblock: drop memblock_alloc_*_nopanic() variantsMike Rapoport
As all the memblock allocation functions return NULL in case of error rather than panic(), the duplicates with _nopanic suffix can be removed. Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [printk] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12swiotlb: add checks for the return value of memblock_alloc*()Mike Rapoport
Add panic() calls if memblock_alloc() returns NULL. The panic() format duplicates the one used by memblock itself and in order to avoid explosion with long parameters list replace open coded allocation size calculations with a local variable. Link: http://lkml.kernel.org/r/1548057848-15136-19-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Several fixes, most notably fix for virtio on swiotlb systems" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: silence an unused-variable warning virtio: hint if callbacks surprisingly might sleep virtio-ccw: wire up ->bus_name callback s390/virtio: handle find on invalid queue gracefully virtio-ccw: diag 500 may return a negative cookie virtio_balloon: remove the unnecessary 0-initialization virtio-balloon: improve update_balloon_size_func virtio-blk: Consider virtio_max_dma_size() for maximum segment size virtio: Introduce virtio_max_dma_size() dma: Introduce dma_max_mapping_size() swiotlb: Add is_swiotlb_active() function swiotlb: Introduce swiotlb_max_mapping_size()
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-08Merge branch 'stable/for-linus-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Expands the SWIOTLB to have debugfs support (along with bug-fixes), and a tiny fix" * 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: drop pointless static qualifier in swiotlb_create_debugfs() swiotlb: checking whether swiotlb buffer is full with io_tlb_used swiotlb: add debugfs to track swiotlb buffer usage swiotlb: fix comment on swiotlb_bounce()
2019-03-07Merge tag 'powerpc-5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...
2019-03-06dma: Introduce dma_max_mapping_size()Joerg Roedel
The function returns the maximum size that can be mapped using DMA-API functions. The patch also adds the implementation for direct DMA and a new dma_map_ops pointer so that other implementations can expose their limit. Cc: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-06swiotlb: Add is_swiotlb_active() functionJoerg Roedel
This function will be used from dma_direct code to determine the maximum segment size of a dma mapping. Cc: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-06swiotlb: Introduce swiotlb_max_mapping_size()Joerg Roedel
The function returns the maximum size that can be remapped by the SWIOTLB implementation. This function will be later exposed to users through the DMA-API. Cc: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-20dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flagChristoph Hellwig
All users of dma_declare_coherent want their allocations to be exclusive, so default to exclusive allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20dma-mapping: remove dma_mark_declared_memory_occupiedChristoph Hellwig
This API is not used anywhere, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-20dma-mapping: move CONFIG_DMA_CMA to kernel/dma/KconfigChristoph Hellwig
This is where all the related code already lives. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20dma-mapping: improve selection of dma_declare_coherent availabilityChristoph Hellwig
This API is primarily used through DT entries, but two architectures and two drivers call it directly. So instead of selecting the config symbol for random architectures pull it in implicitly for the actual users. Also rename the Kconfig option to describe the feature better. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18swiotlb: remove swiotlb_dma_supportedChristoph Hellwig
The only user left is powerpc, but even there the generic dma-direct version works just as well, given that we guarantee that the swiotlb buffer must always be addressable. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18dma-mapping, powerpc: simplify the arch dma_set_mask overrideChristoph Hellwig
Instead of letting the architecture supply all of dma_set_mask just give it an additional hook selected by Kconfig. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18powerpc/dma: stop overriding dma_get_required_maskChristoph Hellwig
The ppc_md and pci_controller_ops methods are unused now and can be removed. The dma_nommu implementation is generic to the generic one except for using max_pfn instead of calling into the memblock API, and all other dma_map_ops instances implement a method of their own. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18dma-direct: we might need GFP_DMA for 32-bit dma masksChristoph Hellwig
If there is no ZONE_DMA32 we might need GFP_DMA to be able to allocate memory that satisfies a 32-bit DMA mask. Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-16swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()YueHaibing
There is no need to have the 'struct dentry *d_swiotlb_usage' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-13dma-mapping: remove an incorrect __iommem annotationChristoph Hellwig
memmap return a regular void pointer, not and __iomem one. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-13dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availabilityChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-02-13dma-mapping: add a kconfig symbol for arch_setup_dma_ops availabilityChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-02-13dma-mapping: move debug configuration options to kernel/dmaAndy Shevchenko
This is a follow up to the commit cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma") which moved source code of DMA API to kernel/dma folder. Since there is no file left in the lib that require DMA API debugging options move the latter to kernel/dma as well. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-12swiotlb: checking whether swiotlb buffer is full with io_tlb_usedDongli Zhang
This patch uses io_tlb_used to help check whether swiotlb buffer is full. io_tlb_used is no longer used for only debugfs. It is also used to help optimize swiotlb_tbl_map_single(). Suggested-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12swiotlb: add debugfs to track swiotlb buffer usageDongli Zhang
The device driver will not be able to do dma operations once swiotlb buffer is full, either because the driver is using so many IO TLB blocks inflight, or because there is memory leak issue in device driver. To export the swiotlb buffer usage via debugfs would help the user estimate the size of swiotlb buffer to pre-allocate or analyze device driver memory leak issue. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12swiotlb: fix comment on swiotlb_bounce()Dongli Zhang
Fix the comment as swiotlb_bounce() is used to copy from original dma location to swiotlb buffer during swiotlb_tbl_map_single(), while to copy from swiotlb buffer to original dma location during swiotlb_tbl_unmap_single(). Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-19 04:15:42 +0000