| Age | Commit message (Collapse) | Author |
|---|
|
Add a couple of new APIs to check the probing status of qman and bman:
'int bman_is_probed()' and 'int qman_is_probed()'.
They return the following values.
* 1 if qman/bman were probed correctly
* 0 if qman/bman were not yet probed
* -1 if probing of qman/bman failed
Drivers that use qman/bman driver services are required to use these
APIs before calling any functions exported by qman or bman drivers
or otherwise they will crash the kernel.
The APIs will be used in the following couple of qbman portal patches
and later in the series in the dpaa1 ethernet driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.19
* Add Qualcomm LLCC driver
* Add Qualcomm RPMH controller
* Fix memleak in Qualcomm RMTFS
* Add dummy qcom_scm_assign_mem()
* Fix check for global partition in SMEM
* tag 'qcom-drivers-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
soc: qcom: rmtfs-mem: fix memleak in probe error paths
soc: qcom: llc-slice: Add missing MODULE_LICENSE()
drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
drivers: qcom: rpmh-rsc: allow active requests from wake TCS
drivers: qcom: rpmh: add support for batch RPMH request
drivers: qcom: rpmh: allow requests to be sent asynchronously
drivers: qcom: rpmh: cache sleep/wake state requests
drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
drivers: qcom: rpmh: add RPMH helper functions
drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
drivers: soc: Add LLCC driver
dt-bindings: Documentation for qcom, llcc
soc: qcom: smem: Correct check for global partition
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Platform drivers need make a lot of resource state requests at the same
time, say, at the start or end of an usecase. It can be quite
inefficient to send each request separately. Instead they can give the
RPMH library a batch of requests to be sent and wait on the whole
transaction to be complete.
rpmh_write_batch() is a blocking call that can be used to send multiple
RPMH command sets. Each RPMH command set is set asynchronously and the
API blocks until all the command sets are complete and receive their
tx_done callbacks.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Platform drivers that want to send a request but do not want to block
until the RPMH request completes have now a new API -
rpmh_write_async().
The API allocates memory and send the requests and returns the control
back to the platform driver. The tx_done callback from the controller is
handled in the context of the controller's thread and frees the
allocated memory. This API allows RPMH requests from atomic contexts as
well.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.
Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.
Also allow invalidating the cached requests, so they may be re-populated
again.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[rplsssn: remove unneeded semicolon, address line over 80chars error]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.
rpmh_write() is a synchronous blocking call that can be used to send
active state requests.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add controller driver for QCOM SoCs that have hardware based shared
resource management. The hardware IP known as RSC (Resource State
Coordinator) houses multiple Direct Resource Voter (DRV) for different
execution levels. A DRV is a unique voter on the state of a shared
resource. A Trigger Control Set (TCS) is a bunch of slots that can house
multiple resource state requests, that when triggered will issue those
requests through an internal bus to the Resource Power Manager Hardened
(RPMH) blocks. These hardware blocks are capable of adjusting clocks,
voltages, etc. The resource state request from a DRV are aggregated
along with state requests from other processors in the SoC and the
aggregate value is applied on the resource.
Some important aspects of the RPMH communication -
- Requests are <addr, value> with some header information
- Multiple requests (upto 16) may be sent through a TCS, at a time
- Requests in a TCS are sent in sequence
- Requests may be fire-n-forget or completion (response expected)
- Multiple TCS from the same DRV may be triggered simultaneously
- Cannot send a request if another request for the same addr is in
progress from the same DRV
- When all the requests from a TCS are complete, an IRQ is raised
- The IRQ handler needs to clear the TCS before it is available for
reuse
- TCS configuration is specific to a DRV
- Platform drivers may use DRV from different RSCs to make requests
Resource state requests made when CPUs are active are called 'active'
state requests. Requests made when all the CPUs are powered down (idle
state) are called 'sleep' state requests. They are matched by a
corresponding 'wake' state requests which puts the resources back in to
previously requested active state before resuming any CPU. TCSes are
dedicated for each type of requests. Active mode TCSes (AMC) are used to
send requests immediately to the resource, while control TCS are used to
provide specific information to the controller. Sleep and Wake TCS send
sleep and wake requests, after and before the system halt respectively.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Recent Raspberry Pi firmware provides a mailbox property to detect
under-voltage conditions. Here is the current definition.
The u32 value returned by the firmware is divided into 2 parts:
- lower 16-bits are the live value
- upper 16-bits are the history or sticky value
Bits:
0: undervoltage
1: arm frequency capped
2: currently throttled
16: undervoltage has occurred
17: arm frequency capped has occurred
18: throttling has occurred
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
|
|
The tegra_cpuidle_pcie_irqs_in_use() function is stubbed out for non-ARM
builds, but now we can compile-test the Tegra pci driver on non-Tegra
ARM platforms as well, which results in a new link error:
drivers/pci/host/pci-tegra.o: In function `tegra_pcie_map_irq':
pci-tegra.c:(.text+0x288): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
drivers/pci/host/pci-tegra.o: In function `tegra_msi_map':
pci-tegra.c:(.text+0xba0): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
This adapts the #ifdef statement to match the exact condition under which
the function can be called.
Fixes: 51bc085d6454 ("PCI: Improve host drivers compile test coverage")
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/late
Qualcomm ARM Based Driver Updates for v4.18
* Various SMEM updates/fixes
* Add qcom_smem_virt_to_phys SMEM API
* Update MAINTAINERS to include qcom_scm pattern
* Add Qualcomm Command DB driver
* Add Qualcomm SCM compatible for IPQ4019
* Add MSM8998 to smd-rpm compatible list
* Add Qualcomm GENI based QUP wrapper
* Fix Qualcomm QMI buffer sizing bug
* tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
soc: qcom: Add GENI based QUP Wrapper driver
soc: qcom: smd-rpm: Add msm8998 compatible
firmware: qcom: scm: Add ipq4019 soc compatible
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Command DB is a simple database in the shared memory of QCOM SoCs, that
provides information regarding shared resources. Some shared resources
in the SoC have properties that are probed dynamically at boot by the
remote processor. The information pertaining to the SoC and the platform
are made available in the shared memory. Drivers can query this
information using predefined strings.
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
memory: tegra: Changes for v4.18-rc1
This contains some cleanup of the memory controller driver as well as
unification work to share more code between Tegra20 and later SoC
generations. Also included are an implementation for the hot resets
functionality by the memory controller which is required to properly
reset busy hardware.
* tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Register SMMU after MC driver became ready
memory: tegra: Add Tegra210 memory controller hot resets
memory: tegra: Add Tegra124 memory controller hot resets
memory: tegra: Add Tegra114 memory controller hot resets
memory: tegra: Add Tegra30 memory controller hot resets
memory: tegra: Add Tegra20 memory controller hot resets
memory: tegra: Introduce memory client hot reset
memory: tegra: Squash tegra20-mc into common tegra-mc driver
memory: tegra: Remove unused headers inclusions
memory: tegra: Apply interrupts mask per SoC
memory: tegra: Setup interrupts mask before requesting IRQ
memory: tegra: Do not handle spurious interrupts
dt-bindings: memory: tegra: Add hot resets definitions
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
In order to reset busy HW properly, memory controller needs to be
involved, otherwise it is possible to get corrupted memory or hang machine
if HW was reset during DMA. Introduce memory client 'hot reset' that will
be used for resetting of busy HW.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra30+ has some minor differences in registers / bits layout compared
to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver
in a preparation for the upcoming MC hot reset controls implementation,
avoiding code duplication.
Note that this currently doesn't report the value of MC_GART_ERROR_REQ
because it is located within the GART register area and cannot be safely
accessed from the MC driver (this happens to work only by accident). The
proper solution is to integrate the GART driver with the MC driver, much
like is done for the Tegra SMMU, but that is an invasive change and will
be part of a separate patch series.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
If CONFIG_RASPBERRYPI_FIRMWARE=n:
drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_polarity’:
drivers/gpio/gpio-raspberrypi-exp.c:71: warning: ‘get.polarity’ is used uninitialized in this function
drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_direction’:
drivers/gpio/gpio-raspberrypi-exp.c:150: warning: ‘get.direction’ is used uninitialized in this function
The dummy firmware interface functions return 0, which means success,
causing subsequent code to make use of the never initialized output
parameter.
Fix this by making the dummy functions return an error code (-ENOSYS)
instead.
Note that this assumes the firmware always fills in the requested data
in the CONFIG_RASPBERRYPI_FIRMWARE=y case.
Fixes: d45f1a563b92dac7 ("staging: vc04_services: fix up rpi firmware functions")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do
power management in a platform independent way.
This has been through many review cycles, and it relies on a rather
interesting way of using the mailbox subsystem, but in the end I
agreed that Sudeep's version was the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up a
little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
reset: uniphier: add ethernet reset control support for PXs3
reset: stm32mp1: Enable stm32mp1 reset driver
dt-bindings: reset: add STM32MP1 resets
reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
reset: modify the way reset lookup works for board files
reset: add support for non-DT systems
clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
firmware: arm_scmi: prevent accessing rate_discrete uninitialized
hwmon: (scmi) return -EINVAL when sensor information is unavailable
amlogic: meson-gx-socinfo: Update soc ids
soc/tegra: pmc: Use the new reset APIs to manage reset controllers
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
cpufreq: scmi: add thermal dependency
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "firmware: Changes for v4.17-rc1" from Thierry Reding:
These changes are rather small, with just a fix for a return value check
and some preparatory work for Tegra194 BPMP support.
* tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: adjust tested variable
firmware: tegra: Simplify channel management
|
|
Linux 4.16-rc5 merged into the GPIO devel branch to resolve
a nasty conflict between fixes and devel in the RCAR driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX),
and they are not placed contiguously in memory. The current channel
management in the BPMP driver does not support this.
Simplify and refactor the channel management such that only one atomic
transmit channel and one receive channel are supported, and channels
are not required to be placed contiguously in memory. The same
configuration also works on T186 so we end up with less code.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- MCIP aka ARconnect fixes for SMP builds [Euginey]
- preventive fix for SLC (L2 cache) flushing [Euginey]
- Kconfig default fix [Ulf Magnusson]
- trailing semicolon fixes [Luis de Bethencourt]
- other assorted minor fixes
* tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: setup cpu possible mask according to possible-cpus dts property
ARC: mcip: update MCIP debug mask when the new cpu came online
ARC: mcip: halt GFRC counter when ARC cores halt
ARCv2: boot log: fix HS48 release number
arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ARC: boot log: Fix trailing semicolon
ARC: dw2 unwind: Fix trailing semicolon
ARC: Enable fatal signals on boot for dev platforms
ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction
ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
|
|
As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.
So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
In SMP systems, GFRC is used for clocksource. However by default the
counter keeps running even when core is halted (say when debugging via a
JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall
splat such as below:
| [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done
| Running with 1000 processes for 1000 objects
| hrtimer: interrupt took 485060 ns
|
| create_cnt: 1000
| Running with 1000 processes for 1000 objects
| [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| INFO: rcu_preempt detected stalls on CPUs/tasks:
| 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0
| (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1)
Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4
ARC cores with help of GFRC's CORE register where we set a mask for
cores which state we need to rely on.
We update cpu mask every time new cpu came online instead of using
hardcoded one or using mask generated from "possible_cpus" as we
want it set correctly even if we run kernel on HW which has fewer cores
than expected (or we launch kernel via debugger and kick fever cores
than HW has)
Note that GFRC halts when all cores have halted and thus relies on
programming of Inter-Core-dEbug register to halt all cores when one
halts.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
|
|
Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed for the GPIO tags, so we can control the GPIO
multiplexor lines.
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A number of new drivers get added this time, along with many
low-priority bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC
types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM
SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with the
TEE is added"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
of: platform: fix OF node refcount leak
soc: fsl: guts: Add a NULL check for devm_kasprintf()
bus: ti-sysc: Fix smartreflex sysc mask
psci: add CPU_IDLE dependency
soc: xilinx: Fix Kconfig alignment
soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
soc: bcm: brcmstb: Be multi-platform compatible
soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
Revert "soc: brcmstb: Only register SoC device on STB platforms"
bus: omap: add MODULE_LICENSE tags
soc: brcmstb: Only register SoC device on STB platforms
tee: shm: Potential NULL dereference calling tee_shm_register()
soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
soc: xilinx: Create folder structure for soc specific drivers
of: platform: populate /firmware/ node from of_platform_default_populate_init()
soc: samsung: Add SPDX license identifiers
soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
tee: shm: don't put_page on null shm->pages
...
|
|
Create SMMU display groups for Tegra30, Tegra114, Tegra124 and Tegra210.
This allows the display controllers on these devices to share the same
IOMMU domain using the standard IOMMU group mechanism.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Move Tegra186 support to the consolidated PMC driver to reduce some of
the duplication and also gain I/O pad functionality on the new SoC as a
side-effect.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have two changes to the core framework this time around.
The first being a large change that introduces runtime PM support to
the clk framework. Now we properly call runtime PM operations on the
device providing a clk when the clk is in use. This helps on SoCs
where the clks provided by a device need something to be powered on
before using the clks, like power domains or regulators. It also helps
power those things down when clks aren't in use.
The other core change is a devm API addition for clk providers so we
can get rid of a bunch of clk driver remove functions that are just
doing of_clk_del_provider().
Outside of the core, we have the usual addition of clk drivers and
smattering of non-critical fixes to existing drivers. The biggest diff
is support for Mediatek MT2712 and MT7622 SoCs, but those patches
really just add a bunch of data.
By the way, we're trying something new here where we build the tree up
with topic branches. We plan to work this into our workflow so that we
don't step on each other's toes, and so the fixes branch can be merged
on an as-needed basis.
Summary:
Core:
- runtime PM support for clk providers
- devm API for of_clk_add_hw_provider()
New Drivers:
- Mediatek MT2712 and MT7622
- Renesas R-Car V3M SoC
Updates:
- runtime PM support for Samsung exynos5433/exynos4412 providers
- removal of clkdev aliases on Samsung SoCs
- convert clk-gpio to use gpio descriptors
- various driver cleanups to match kernel coding style
- Amlogic Video Processing Unit VPU and VAPB clks
- sigma-delta modulation for Allwinner audio PLLs
- Allwinner A83t Display clks
- support for the second display unit clock on Renesas RZ/G1E
- suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
- new clock ids for Rockchip rk3188 and rk3368 SoCs
- various 'const' markings on clk_ops structures
- RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
clk: stm32h7: fix test of clock config
clk: pxa: fix building on older compilers
clk: sunxi-ng: a83t: Fix i2c buses bits
clk: ti: dra7-atl-clock: fix child-node lookups
clk: qcom: common: fix legacy board-clock registration
clk: uniphier: fix DAPLL2 clock rate of Pro5
clk: uniphier: fix parent of miodmac clock data
clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
clk: hi3660: fix incorrect uart3 clock freqency
clk: kona-setup: Delete error messages for failed memory allocations
ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
clk: cdce925: remove redundant check for non-null parent_name
clk: versatile: Improve sizeof() usage
clk: versatile: Delete error messages for failed memory allocations
clk: ux500: Improve sizeof() usage
clk: ux500: Delete error messages for failed memory allocations
clk: spear: Delete error messages for failed memory allocations
clk: ti: Delete error messages for failed memory allocations
clk: mmp: Adjust checks for NULL pointers
...
|
|
* clk-at91:
clk: at91: utmi: set the mainck rate
|
|
By default, it is assumed that the UTMI clock is generated from a 12 MHz
reference clock (MAINCK). If it's not the case, the FREQ field of the
SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
proper way.
The UTMI clock has a fixed rate of 480 MHz. In fact, there is no
multiplier we can configure. The multiplier is managed internally,
depending on the reference clock frequency, to achieve the target of
480 MHz.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Tegra power management firmware running on the co-processor (BPMP)
implements a simple pseudo file system akin to debugfs. The file
system can be used for debugging purposes to examine and change the
status of selected resources controlled by the firmware (such as
clocks, resets, voltages, powergates, ...).
Add support to "mirror" the firmware's file system to debugfs. At
boot, query firmware for a list of all possible files and create
corresponding debugfs entries. Read/write of individual files is
implemented by sending a Message ReQuest (MRQ) that passes the full
file path name and data to firmware via DRAM.
Signed-off-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add static inline stubs to bpmp.h when CONFIG_BPMP is not enabled.
This allows building BPMP-related drivers with COMPILE_TEST.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Expose and export the tegra_bpmp_mrq_return() function for use by
drivers outside the core BPMP driver. This function is used to reply to
messages originating from the BPMP, which is required in the thermal
driver.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Response messages from Tegra BPMP firmware contain an error return code
as the first word of payload. The error code is used to indicate
incorrectly formatted request message or use of non-existing resource
(clk, reset, powergate) identifier. Current implementation of
tegra_bpmp_transfer() ignores this code and does not pass it to caller.
Fix this by adding an extra struct member to tegra_bpmp_message and
populate that with return code.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver
subsystems"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
soc/tegra: fuse: Add missing semi-colon
soc/tegra: Restrict SoC device registration to Tegra
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
soc/tegra: Register SoC device
firmware: tegra: set drvdata earlier
memory: Convert to using %pOF instead of full_name
soc: Convert to using %pOF instead of full_name
bus: Convert to using %pOF instead of full_name
firmware: Convert to using %pOF instead of full_name
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
reset: uniphier: add analog amplifiers reset control
reset: uniphier: add video input subsystem reset control
...
|
|
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.
The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.
Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Move this code from arch/arm/mach-tegra and make it common among 32-bit
and 64-bit Tegra SoCs. This is slightly complicated by the fact that on
32-bit Tegra, the SoC device is used as the parent for all devices that
are instantiated from device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
|
|
The BPMP firmware, found on Tegra186 and later, provides an ABI that can
be used to enable and disable power to several power partitions in Tegra
SoCs. The ABI allows for enumeration of the available power partitions,
so the driver can be reused on future generations, provided the BPMP ABI
remains stable.
Based on work by Stefan Kristiansson <stefank@nvidia.com> and Mikko
Perttunen <mperttunen@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Update the BPMP ABI header to a more recent version. The new version
adds support for a new powergating ABI as well as access to the ring
buffer console, which allows debug messages to be output to the BPMP
debug console.
Some of the previously undocumented fields have been documented and
missing bitmasks have been added. Furthermore the MRQ_RESET request
now has a sub-command that allows to determine the maximum ID which
in turn allows the resets to be enumerated, thereby allowing drivers
to become agnostic of the Tegra generation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can
be enabled with the "fsl,hdlc-bus" property in the DTS node of the
corresponding ucc.
This aligns the configuration of the UPSMR and GUMR registers to what is
done in our ucc_hdlc driver (that only support hdlc-bus mode) and with
the QuickEngine's documentation for hdlc-bus mode.
GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal
is ignored. The brkpt_support is enabled to set the HBM1 bit in the
CMXUCR register to configure an open-drain connected HDLC bus.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the bitmask for the two bit SYNL register according to the QUICK
Engine Reference Manual.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The change to the Linux page table geometry was delayed for more
testing with 16G pages, and there's the new CPU features stuff which
just needed one more polish before going in. Plus a few changes from
Scott which came in a bit late. And then various fixes, mostly minor.
Summary highlights:
- rework the Linux page table geometry to lower memory usage on
64-bit Book3S (IBM chips) using the Hash MMU.
- support for a new device tree binding for discovering CPU features
on future firmwares.
- Freescale updates from Scott:
"Includes a fix for a powerpc/next mm regression on 64e, a fix for
a kernel hang on 64e when using a debugger inside a relocated
kernel, a qman fix, and misc qe improvements."
Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"
* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Support new device tree binding for discovering CPU features
powerpc: Don't print cpu_spec->cpu_name if it's NULL
of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
powerpc/64s: Fix unnecessary machine check handler relocation branch
powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
powerpc: Fix distclean with Makefile.postlink
powerpc/64e: Don't place the stack beyond TASK_SIZE
powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
soc/fsl/qbman: Disable IRQs for deferred QBMan work
soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
soc/fsl/qe: round brg_freq to 1kHz granularity
soc/fsl/qe: get rid of immrbar_virt_to_phys()
net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
powerpc/64e: Fix hang when debugging programs with relocated kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs:
Reset subsystem, merged through arm-soc by tradition:
- Make bool drivers explicitly non-modular
- New support for i.MX7 and Arria10 reset controllers
PATA driver for Palmchip BK371 (acked by Tejun)
Power domain drivers for i.MX (GPC, GPCv2)
- Moved out of mach-imx for GPC
- Bunch of tweaks, fixes, etc
PMC support for Tegra186
SoC detection support for Renesas RZ/G1H and RZ/G1N
Move Tegra flow controller driver from mach directory to drivers/soc
- (Power management / CPU power driver)
Misc smaller tweaks for other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
soc: pm-domain: Fix the mangled urls
soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
soc: renesas: rcar-sysc: Add support for fixing up power area tables
soc: renesas: Register SoC device early
soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
soc: imx: gpc: add defines for domain index
soc: imx: Add GPCv2 power gating driver
dt-bindings: Add GPCv2 power gating driver
ARM/clk: move the ICST library to drivers/clk
ARM: plat-versatile: remove stale clock header
ARM: keystone: Drop PM domain support for k2g
soc: ti: Add ti_sci_pm_domains driver
dt-bindings: Add TI SCI PM Domains
PM / Domains: Do not check if simple providers have phandle cells
PM / Domains: Add generic data pointer to genpd data struct
soc/tegra: Add initial flowctrl support for Tegra132/210
soc/tegra: flowctrl: Add basic platform driver
soc/tegra: Move Tegra flowctrl driver
ARM: tegra: Remove unnecessary inclusion of flowctrl header
...
|
|
immrbar_virt_to_phys() is not used anymore
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram
implementation"), muram area is not part of immrbar mapping anymore
so immrbar_virt_to_phys() is not usable anymore.
Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
The flowctrl driver is required for both ARM and ARM64 Tegra devices
and in order to enable support for it for ARM64, move the Tegra flowctrl
driver into drivers/soc/tegra.
By moving the flowctrl driver, tegra_flowctrl_init() is now called by
via an early initcall and to prevent this function from attempting to
mapping IO space for a non-Tegra device, a test for 'soc_is_tegra()'
is also added.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
Laurentiu Tudor
Olof Johansson
Roy Pledge
Lina Iyer
Stefan Wahren
Linus Torvalds
Arnd Bergmann
Mahesh Sivasubramanian
Dmitry Osipenko
Geert Uytterhoeven
Linus Walleij
Mikko Perttunen
Eugeniy Paltsev
Baruch Siach
Thierry Reding
Stephen Boyd
Ludovic Desroches
Timo Alho
Yong Wu
Holger Brunck
Christophe Leroy
Jon Hunter