summaryrefslogtreecommitdiffstats
path: root/fs/xfs/xfs_inode.c
AgeCommit message (Collapse)Author
2018-07-26xfs: remove all boilerplate defer init/finish codeBrian Foster
At this point, the transaction subsystem completely manages deferred items internally such that the common and boilerplate xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() -> xfs_trans_commit() sequence can be replaced with a simple transaction allocation and commit. Remove all such boilerplate deferred ops code. In doing so, we change each case over to use the dfops in the transaction and specifically eliminate: - The on-stack dfops and associated xfs_defer_init() call, as the internal dfops is initialized on transaction allocation. - xfs_bmap_finish() calls that precede a final xfs_trans_commit() of a transaction. - xfs_defer_cancel() calls in error handlers that precede a transaction cancel. The only deferred ops calls that remain are those that are non-deterministic with respect to the final commit of the associated transaction or are open-coded due to special handling. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-26xfs: pull up dfops from xfs_itruncate_extents()Brian Foster
xfs_itruncate_extents[_flags]() uses a local dfops with a transaction provided by the caller. It uses hacky ->t_dfops replacement logic to avoid stomping over an already populated ->t_dfops. The latter never occurs for current callers and the logic itself is not really appropriate. Clean this up by updating all callers to initialize a dfops and to use that down in xfs_itruncate_extents(). This more closely resembles the upcoming logic where dfops will be embedded within the transaction. We can also replace the xfs_defer_init() in the xfs_itruncate_extents_flags() loop with an assert. Both dfops and firstblock should be in a valid state after xfs_defer_finish() and the inode joined to the dfops is fixed throughout the loop. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: remove xfs_defer_init() firstblock paramBrian Foster
All but one caller of xfs_defer_init() passes in the ->t_firstblock of the associated transaction. The one outlier is xlog_recover_process_intents(), which simply passes a dummy value because a valid pointer is required. This firstblock variable can simply be removed. At this point we could remove the xfs_defer_init() firstblock parameter and initialize ->t_firstblock directly. Even that is not necessary, however, because ->t_firstblock is automatically reinitialized in the new transaction on a transaction roll. Since xfs_defer_init() should never occur more than once on a particular transaction (since the corresponding finish will roll it), replace the reinit from xfs_defer_init() with an assert that verifies the transaction has a NULLFSBLOCK firstblock. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: use ->t_firstblock in inode inactivateBrian Foster
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: remove xfs_bunmapi() firstblock paramBrian Foster
All callers pass ->t_firstblock from the current transaction. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: use ->t_firstblock for all xfs_bunmapi() callersBrian Foster
Convert all xfs_bunmapi() callers to ->t_firstblock. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: remove firstblock param from xfs dir opsBrian Foster
All callers of the xfs_dir_*() functions pass ->t_firstblock as the firstblock parameter. Drop the parameter and access ->t_firstblock directly. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: use ->t_firstblock in dir opsBrian Foster
Callers of the xfs_dir_*() functions currently pass an on-stack firstblock variable. While the dirops infrastructure carries a pointer to this variable, it never rolls the transaction and so it is safe to use ->t_firstblock instead. Fix up the various xfs_dir_*() callers to use ->t_firstblock. Also remove the unnecessary parameter for xfs_cross_rename(). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: refactor dfops init to attach to transactionBrian Foster
Most callers of xfs_defer_init() immediately attach the dfops structure to a transaction. Add a transaction parameter to eliminate much of this boilerplate code. This also helps self-document the fact that many codepaths now expect a dfops pointer implicitly via xfs_trans->t_dfops. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: remove xfs_bunmapi() dfops paramBrian Foster
Now that all xfs_bunmapi() callers use ->t_dfops, remove the unnecessary parameter and access ->t_dfops directly. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: use ->t_dfops for all xfs_bunmapi() callersBrian Foster
Use ->t_dfops for all remaining xfs_bunmapi() callers. This prepares the latter to no longer require a dfops parameter. Note that xfs_itruncate_extents_flags() associates a local dfops with a transaction provided from the caller. Since there are multiple callers, set and reset ->t_dfops before the function returns to avoid exposure of stack memory to the caller. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: remove dfops param from high level dirname callsBrian Foster
All callers of the directory create, rename and remove interfaces already associate the dfops with the transaction. Drop the dfops parameters in these calls in preparation for further cleanups in the layers below. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: remove dfops parameter from ifree call stackBrian Foster
The inode free callchain starting in xfs_inactive_ifree() already associates its dfops with the transaction. It still passes the dfops on the stack down through xfs_difree_inobt(), however. Clean up the call stack and reference dfops directly from the transaction. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-11xfs: rename xfs_trans ->t_agfl_dfops to ->t_dfopsBrian Foster
The ->t_agfl_dfops field is currently used to defer agfl block frees from associated transaction contexts. While all known problematic contexts have already been updated to use ->t_agfl_dfops, the broader goal is defer agfl frees from all callers that already use a deferred operations structure. Further, the transaction field facilitates a good amount of code clean up where the transaction and dfops have historically been passed down through the stack separately. Rename the field to something more generic to prepare to use it as such throughout XFS. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-21xfs: xfs_iflush_abort() can be called twice on cluster writeback failureDave Chinner
When a corrupt inode is detected during xfs_iflush_cluster, we can get a shutdown ASSERT failure like this: XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork XFS (pmem1): Unmount and run xfs_repair XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116 XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88 XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9 XFS (pmem1): Please umount the filesystem and rectify the problem(s) XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258 ..... Call Trace: xfs_iflush_abort+0x10a/0x110 xfs_iflush+0xf3/0x390 xfs_inode_item_push+0x126/0x1e0 xfsaild+0x2c5/0x890 kthread+0x11c/0x140 ret_from_fork+0x24/0x30 Essentially, xfs_iflush_abort() has been called twice on the original inode that that was flushed. This happens because the inode has been flushed to teh buffer successfully via xfs_iflush_int(), and so when another inode is detected as corrupt in xfs_iflush_cluster, the buffer is marked stale and EIO, and iodone callbacks are run on it. Running the iodone callbacks walks across the original inode and calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns to xfs_iflush(), it runs the error path for that function, and that calls xfs_iflush_abort() on the inode a second time, leading to the above assert failure as the inode is not flush locked anymore. This bug has been there a long time. The simple fix would be to just avoid calling xfs_iflush_abort() in xfs_iflush() if we've got a failure from xfs_iflush_cluster(). However, xfs_iflush_cluster() has magic delwri buffer handling that means it may or may not have run IO completion on the buffer, and hence sometimes we have to call xfs_iflush_abort() from xfs_iflush(), and sometimes we shouldn't. After reading through all the error paths and the delwri buffer code, it's clear that the error handling in xfs_iflush_cluster() is unnecessary. If the buffer is delwri, it leaves it on the delwri list so that when the delwri list is submitted it sees a shutdown fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO and runs IO completion. i.e. exactly what xfs+iflush_cluster() does when it's not a delwri buffer. Further, marking a buffer stale clears the _XBF_DELWRI_Q flag on the buffer, which means when submission of the buffer occurs, it just skips over it and releases it. IOWs, the error handling in xfs_iflush_cluster doesn't need to care if the buffer is already on a the delwri queue or not - it just needs to mark the buffer stale, EIO and run completions. That means we can just use the easy fix for xfs_iflush() to avoid the double abort. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-08xfs: replace do_mod with native operationsDave Chinner
do_mod() is a hold-over from when we have different sizes for file offsets and and other internal values for 40 bit XFS filesystems. Hence depending on build flags variables passed to do_mod() could change size. We no longer support those small format filesystems and hence everything is of fixed size theses days, even on 32 bit platforms. As such, we can convert all the do_mod() callers to platform optimised modulus operations as defined by linux/math64.h. Individual conversions depend on the types of variables being used. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06xfs: convert to SPDX license tagsDave Chinner
Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-06-04xfs: don't assert on corrupted unlinked inode listDarrick J. Wong
Use the per-ag inode number verifiers to detect corrupt lists and error out, instead of using ASSERTs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-05-15xfs: factor out nodiscard helpersBrian Foster
The changes to skip discards of speculative preallocation and unwritten extents introduced several new wrapper functions through the bunmapi -> extent free codepath to reduce churn in all of the associated callers. In several cases, these wrappers simply toggle a single flag to skip or not skip discards for the resulting blocks. The explicit _nodiscard() wrappers for such an isolated set of callers is a bit overkill. Kill off these wrappers and replace with the calls to the underlying functions in the contexts that need to control discard behavior. Retain the wrappers that preserve the original calling conventions to serve the original purpose of reducing code churn. This is a refactoring patch and does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-10xfs: remove unnecessary xfs_qm_dqattach parameterDarrick J. Wong
The flags argument is always zero, get rid of it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-05-10xfs: skip online discard during eofblocks trimsBrian Foster
We've had reports of online discard operations being sent from XFS on write-only workloads. These discards occur as a result of eofblocks trims that can occur after a large file copy completes. These discards are slightly confusing for users who might be paying close attention to online discards (i.e., vdo) due to performance sensitivity. They also happen to be spurious because freed post-eof blocks by definition have not been written to during the current allocation cycle. Update xfs_free_eofblocks() to skip discards that are purely attributed to eofblocks trims. This cuts down the number of spurious discards that may occur on write-only workloads due to normal preallocation activity. Note that discards of post-eof extents can still occur from other codepaths that do not isolate handling of post-eof blocks from those within eof. For example, file unlinks and truncates may still cause discards for any file blocks affected by the operation. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-10xfs: log item flags are racyDave Chinner
The log item flags contain a field that is protected by the AIL lock - the XFS_LI_IN_AIL flag. We use non-atomic RMW operations to set and clear these flags, but most of the updates and checks are not done with the AIL lock held and so are susceptible to update races. Fix this by changing the log item flags to use atomic bitops rather than be reliant on the AIL lock for update serialisation. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09xfs: defer agfl frees from directory op transactionsBrian Foster
Directory operations can perform block allocations as entries are added/removed from directories. Defer AGFL block frees from the remaining directory operation transactions. This covers the hard link, remove and rename operations. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09xfs: defer frees from common inode allocation pathsBrian Foster
Inode allocation can require block allocation for physical inode chunk allocation, inode btree record insertion, and/or directory block allocation for entry insertion. Any of these block allocation requests can require AGFL fixups prior to the actual allocation. Update the common file creation transacions to defer AGFL frees from these contexts to avoid too much log reservation consumption per-transaction. Since these transactions are already passed down through the btree cursors and da_args structure, this simply requires to attach dfops to the transaction. Note that this covers tr_create, tr_mkdir and tr_symlink. Other transactions such as tr_create_tmpfile do not already make use of deferred operations and so are left alone for the time being. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09xfs: defer agfl frees from inode inactivationBrian Foster
XFS inode chunks are already freed via deferred operations (which now also defer AGFL block frees), but inode btree blocks are freed directly in the associated context. This has been known to lead to log reservation overruns in particular workloads where an inobt block free may require several AGFL block frees (and thus several allocation btree modifications) before the inobt block itself is actually freed. To avoid this problem, defer the frees of any AGFL blocks before the inobt block free takes place. This requires passing the dfops from xfs_inactive_ifree() down through the inobt ->[alloc|free]_block() callouts, which essentially only requires to attach the dfops to the transaction since it is already carried all the way through to the inobt update and allocation. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09xfs: validate allocated inode numberDave Chinner
When we have corrupted free inode btrees, we can attempt to allocate inodes that we know are already allocated. Catch allocation of these inodes and report corruption as early as possible to prevent corruption propagation or deadlocks. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-10xfs: only cancel cow blocks when truncating the data forkDarrick J. Wong
In xfs_itruncate_extents, only cancel cow blocks and clear the reflink flag if we were asked to truncate the data fork. Attr fork blocks cannot be shared, so this makes no sense. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-04-09xfs: non-scrub - remove unused function parametersEric Sandeen
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-02xfs: Remove "committed" argument of xfs_dir_iallocChandan Rajendra
xfs_dir_ialloc() rolls the current transaction when allocation of a new inode required the space manager to perform an allocation and replinish the Inode btree. None of the callers of xfs_dir_ialloc() need to know if the transaction was committed. Hence this commit removes the "committed" argument of xfs_dir_ialloc. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-29xfs: do not log/recover swapext extent owner changes for deleted inodesEric Sandeen
Today if we run xfs_fsr and crash[1], log replay can fail because the recovery code tries to instantiate the donor inode from disk to replay the swapext, but it's been deleted and we get verifier failures when we try to read the inode off disk with i_mode == 0. This fixes both sides: We don't log the swapext change if the inode has been deleted, and we don't try to recover it either. [1] or if systemd doesn't cleanly unmount root, as it is wont to do ... Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-14xfs: merge _xfs_log_force_lsn and xfs_log_force_lsnChristoph Hellwig
Switch to a single interface for flushing the log to a specific LSN, which gives consistent trace point coverage and a less confusing interface. The was only a single user of the previous xfs_log_force_lsn function, which now also passes a NULL log_flushed argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11xfs: check for cow blocks before trying to clear themDarrick J. Wong
There's no point in allocating a transaction and locking the inode in preparation to clear cow blocks if there actually are any cow fork extents. Therefore, move the xfs_reflink_cancel_cow_range hunk to xfs_inactive and check the cow ifp first. This makes inode reclamation run faster. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-01-31Merge tag 'xfs-4.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs updates from Darrick Wong: "This merge cycle, we're again some substantive changes to XFS. Metadata verifiers have been restructured to provide more detail about which part of a metadata structure failed checks, and we've enhanced the new online fsck feature to cross-reference extent allocation information with the other metadata structures. With this pull, the metadata verification part of online fsck is more or less finished, though the feature is still experimental and still disabled by default. We're also preparing to remove the EXPERIMENTAL tag from a couple of features this cycle. This week we're committing a bunch of space accounting fixes for reflink and removing the EXPERIMENTAL tag from reflink; I anticipate that we'll be ready to do the same for the reverse mapping feature next week. (I don't have any pending fixes for rmap; however I wish to remove the tags one at a time.) This giant pile of patches has been run through a full xfstests run over the weekend and through a quick xfstests run against this morning's master, with no major failures reported. Let me know if there's any merge problems -- git merge reported that one of our patches touched the same function as the i_version series, but it resolved things cleanly. Summary: - Log faulting code locations when verifiers fail, for improved diagnosis of corrupt filesystems. - Implement metadata verifiers for local format inode fork data. - Online scrub now cross-references metadata records with other metadata. - Refactor the fs geometry ioctl generation functions. - Harden various metadata verifiers. - Fix various accounting problems. - Fix uncancelled transactions leaking when xattr functions fail. - Prevent the copy-on-write speculative preallocation garbage collector from racing with writeback. - Emit log reservation type information as trace data so that we can compare against xfsprogs. - Fix some erroneous asserts in the online scrub code. - Clean up the transaction reservation calculations. - Fix various minor bugs in online scrub. - Log complaints about mixed dio/buffered writes once per day and less noisily than before. - Refactor buffer log item lists to use list_head. - Break PNFS leases before reflinking blocks. - Reduce lock contention on reflink source files. - Fix some quota accounting problems with reflink. - Fix a serious corruption problem in the direct cow write code where we fed bad iomaps to the vfs iomap consumers. - Various other refactorings. - Remove EXPERIMENTAL tag from reflink!" * tag 'xfs-4.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (94 commits) xfs: remove experimental tag for reflinks xfs: don't screw up direct writes when freesp is fragmented xfs: check reflink allocation mappings iomap: warn on zero-length mappings xfs: treat CoW fork operations as delalloc for quota accounting xfs: only grab shared inode locks for source file during reflink xfs: allow xfs_lock_two_inodes to take different EXCL/SHARED modes xfs: reflink should break pnfs leases before sharing blocks xfs: don't clobber inobt/finobt cursors when xref with rmap xfs: skip CoW writes past EOF when writeback races with truncate xfs: preserve i_rdev when recycling a reclaimable inode xfs: refactor accounting updates out of xfs_bmap_btalloc xfs: refactor inode verifier corruption error printing xfs: make tracepoint inode number format consistent xfs: always zero di_flags2 when we free the inode xfs: call xfs_qm_dqattach before performing reflink operations xfs: bmap code cleanup Use list_head infra-structure for buffer's log items list Split buffer's b_fspriv field Get rid of xfs_buf_log_item_t typedef ...
2018-01-29Merge tag 'iversion-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull inode->i_version rework from Jeff Layton: "This pile of patches is a rework of the inode->i_version field. We have traditionally incremented that field on every inode data or metadata change. Typically this increment needs to be logged on disk even when nothing else has changed, which is rather expensive. It turns out though that none of the consumers of that field actually require this behavior. The only real requirement for all of them is that it be different iff the inode has changed since the last time the field was checked. Given that, we can optimize away most of the i_version increments and avoid dirtying inode metadata when the only change is to the i_version and no one is querying it. Queries of the i_version field are rather rare, so we can help write performance under many common workloads. This patch series converts existing accesses of the i_version field to a new API, and then converts all of the in-kernel filesystems to use it. The last patch in the series then converts the backend implementation to a scheme that optimizes away a large portion of the metadata updates when no one is looking at it. In my own testing this series significantly helps performance with small I/O sizes. I also got this email for Christmas this year from the kernel test robot (a 244% r/w bandwidth improvement with XFS over DAX, with 4k writes): https://lkml.org/lkml/2017/12/25/8 A few of the earlier patches in this pile are also flowing to you via other trees (mm, integrity, and nfsd trees in particular)". * tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: (22 commits) fs: handle inode->i_version more efficiently btrfs: only dirty the inode in btrfs_update_time if something was changed xfs: avoid setting XFS_ILOG_CORE if i_version doesn't need incrementing fs: only set S_VERSION when updating times if necessary IMA: switch IMA over to new i_version API xfs: convert to new i_version API ufs: use new i_version API ocfs2: convert to new i_version API nfsd: convert to new i_version API nfs: convert to new i_version API ext4: convert to new i_version API ext2: convert to new i_version API exofs: switch to new i_version API btrfs: convert to new i_version API afs: convert to new i_version API affs: convert to new i_version API fat: convert to new i_version API fs: don't take the i_lock in inode_inc_iversion fs: new API for handling inode->i_version ntfs: remove i_version handling ...
2018-01-29xfs: allow xfs_lock_two_inodes to take different EXCL/SHARED modesDarrick J. Wong
Refactor xfs_lock_two_inodes to take separate locking modes for each inode. Specifically, this enables us to take a SHARED lock on one inode and an EXCL lock on the other. The lock class (MMAPLOCK/ILOCK) must be the same for each inode. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-01-29xfs: refactor inode verifier corruption error printingDarrick J. Wong
Refactor inode verifier error reporting into a non-libxfs function so that we aren't encoding the message format in libxfs. This also changes the kernel dmesg output to resemble buffer verifier errors more closely. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-01-29xfs: always zero di_flags2 when we free the inodeDarrick J. Wong
Always zero the di_flags2 field when we free the inode so that we never end up with an on-disk record for an unallocated inode that also has the reflink iflag set. This is in keeping with the general principle that only files can have the reflink iflag set, even though we'll zero out di_flags2 if we ever reallocate the inode. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-01-29Use list_head infra-structure for buffer's log items listCarlos Maiolino
Now that buffer's b_fspriv has been split, just replace the current singly linked list of xfs_log_items, by the list_head infrastructure. Also, remove the xfs_log_item argument from xfs_buf_resubmit_failed_buffers(), there is no need for this argument, once the log items can be walked through the list_head in the buffer. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: minor style cleanups] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-01-29Split buffer's b_fspriv fieldCarlos Maiolino
By splitting the b_fspriv field into two different fields (b_log_item and b_li_list). It's possible to get rid of an old ABI workaround, by using the new b_log_item field to store xfs_buf_log_item separated from the log items attached to the buffer, which will be linked in the new b_li_list field. This way, there is no more need to reorder the log items list to place the buf_log_item at the beginning of the list, simplifying a bit the logic to handle buffer IO. This also opens the possibility to change buffer's log items list into a proper list_head. b_log_item field is still defined as a void *, because it is still used by the log buffers to store xlog_in_core structures, and there is no need to add an extra field on xfs_buf just for xlog_in_core. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: minor style changes] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-01-29xfs: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Dave Chinner <dchinner@redhat.com>
2018-01-12xfs: use %px for data pointers when debuggingDarrick J. Wong
Starting with commit 57e734423ad ("vsprintf: refactor %pK code out of pointer"), the behavior of the raw '%p' printk format specifier was changed to print a 32-bit hash of the pointer value to avoid leaking kernel pointers into dmesg. For most situations that's good. This is /undesirable/ behavior when we're trying to debug XFS, however, so define a PTR_FMT that prints the actual pointer when we're in debug mode. Note that %p for tracepoints still prints the raw pointer, so in the long run we could consider rewriting some of these messages as tracepoints. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-01-12xfs: use %pS printk format for direct instruction addressesDarrick J. Wong
Use the %pS instead of the %pF printk format specifier for printing symbols from direct addresses. This is needed for the ia64, ppc64 and parisc64 architectures. While we're at it, be consistent with the capitalization of the 'S'. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-01-12xfs: change 0x%p -> %p in print messagesDarrick J. Wong
Since %p prepends "0x" to the outputted string, we can drop the prefix. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-01-08xfs: provide a centralized method for verifying inline fork dataDarrick J. Wong
Replace the current haphazard dir2 shortform verifier callsites with a centralized verifier function that can be called either with the default verifier functions or with a custom set. This helps us strengthen integrity checking while providing us with flexibility for repair tools. xfs_repair wants this to be able to supply its own verifier functions when trying to fix possibly corrupt metadata. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-12-21xfs: don't be so eager to clear the cowblocks tag on truncateDarrick J. Wong
Currently, xfs_itruncate_extents clears the cowblocks tag if i_cnextents is zero. This is wrong, since i_cnextents only tracks real extents in the CoW fork, which means that we could have some delayed CoW reservations still in there that will now never get cleaned. Fix a further bug where we /don't/ clear the reflink iflag if there are any attribute blocks -- really, it's only safe to clear the reflink flag if there are no data fork extents and no cow fork extents. Found by adding clonerange to fsstress in xfs/017. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-12-08xfs: remove "no-allocation" reservations for file creationsChristoph Hellwig
If we create a new file we will need an inode, and usually some metadata in the parent direction. Aiming for everything to go well despite the lack of a reservation leads to dirty transactions cancelled under a heavy create/delete load. This patch removes those nospace transactions, which will lead to slightly earlier ENOSPC on some workloads, but instead prevent file system shutdowns due to cancelling dirty transactions for others. A customer could observe assertations failures and shutdowns due to cancelation of dirty transactions during heavy NFS workloads as shown below: 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728125] XFS: Assertion failed: error != -ENOSPC, file: fs/xfs/xfs_inode.c, line: 1262 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728222] Call Trace: 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728246] [<ffffffff81795daf>] dump_stack+0x63/0x81 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728262] [<ffffffff810a1a5a>] warn_slowpath_common+0x8a/0xc0 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728264] [<ffffffff810a1b8a>] warn_slowpath_null+0x1a/0x20 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728285] [<ffffffffa01bf403>] asswarn+0x33/0x40 [xfs] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728308] [<ffffffffa01bb07e>] xfs_create+0x7be/0x7d0 [xfs] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728329] [<ffffffffa01b6ffb>] xfs_generic_create+0x1fb/0x2e0 [xfs] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728348] [<ffffffffa01b7114>] xfs_vn_mknod+0x14/0x20 [xfs] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728366] [<ffffffffa01b7153>] xfs_vn_create+0x13/0x20 [xfs] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728380] [<ffffffff81231de5>] vfs_create+0xd5/0x140 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728390] [<ffffffffa045ddb9>] do_nfsd_create+0x499/0x610 [nfsd] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728396] [<ffffffffa0465fa5>] nfsd3_proc_create+0x135/0x210 [nfsd] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728401] [<ffffffffa04561e3>] nfsd_dispatch+0xc3/0x210 [nfsd] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728416] [<ffffffffa03bfa43>] svc_process_common+0x453/0x6f0 [sunrpc] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728423] [<ffffffffa03bfdf3>] svc_process+0x113/0x1f0 [sunrpc] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728427] [<ffffffffa0455bcf>] nfsd+0x10f/0x180 [nfsd] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728432] [<ffffffffa0455ac0>] ? nfsd_destroy+0x80/0x80 [nfsd] 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728438] [<ffffffff810c0d58>] kthread+0xd8/0xf0 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728441] [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728451] [<ffffffff8179d962>] ret_from_fork+0x42/0x70 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728453] [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0 2017-05-30 21:17:06 kernel: WARNING: [ 2670.728454] ---[ end trace f9822c842fec81d4 ]--- 2017-05-30 21:17:06 kernel: ALERT: [ 2670.728477] XFS (sdb): Internal error xfs_trans_cancel at line 983 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x4ee/0x7d0 [xfs] 2017-05-30 21:17:06 kernel: ALERT: [ 2670.728684] XFS (sdb): Corruption of in-memory data detected. Shutting down filesystem 2017-05-30 21:17:06 kernel: ALERT: [ 2670.728685] XFS (sdb): Please umount the filesystem and rectify the problem(s) Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-27xfs: always free inline data before resetting inode fork during ifreeDarrick J. Wong
In xfs_ifree, we reset the data/attr forks to extents format without bothering to free any inline data buffer that might still be around after all the blocks have been truncated off the file. Prior to commit 43518812d2 ("xfs: remove support for inlining data/extents into the inode fork") nobody noticed because the leftover inline data after truncation was small enough to fit inside the inline buffer inside the fork itself. However, now that we've removed the inline buffer, we /always/ have to free the inline data buffer or else we leak them like crazy. This test was found by turning on kmemleak for generic/001 or generic/388. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-11-16xfs: fix forgotten rcu read unlock when skipping inode reclaimDarrick J. Wong
In commit f2e9ad21 ("xfs: check for race with xfs_reclaim_inode"), we skip an inode if we're racing with freeing the inode via xfs_reclaim_inode, but we forgot to release the rcu read lock when dumping the inode, with the result that we exit to userspace with a lock held. Don't do that; generic/320 with a 1k block size fails this very occasionally. ================================================ WARNING: lock held when returning to user space! 4.14.0-rc6-djwong #4 Tainted: G W ------------------------------------------------ rm/30466 is leaving the kernel with locks still held! 1 lock held by rm/30466: #0: (rcu_read_lock){....}, at: [<ffffffffa01364d3>] xfs_ifree_cluster.isra.17+0x2c3/0x6f0 [xfs] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 30466 at kernel/rcu/tree_plugin.h:329 rcu_note_context_switch+0x71/0x700 Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug] CPU: 1 PID: 30466 Comm: rm Tainted: G W 4.14.0-rc6-djwong #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1djwong0 04/01/2014 task: ffff880037680000 task.stack: ffffc90001064000 RIP: 0010:rcu_note_context_switch+0x71/0x700 RSP: 0000:ffffc90001067e50 EFLAGS: 00010002 RAX: 0000000000000001 RBX: ffff880037680000 RCX: ffff88003e73d200 RDX: 0000000000000002 RSI: ffffffff819e53e9 RDI: ffffffff819f4375 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff880062c900d0 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880037680000 R13: 0000000000000000 R14: ffffc90001067eb8 R15: ffff880037680690 FS: 00007fa3b8ce8700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69bf77c000 CR3: 000000002450a000 CR4: 00000000000006e0 Call Trace: __schedule+0xb8/0xb10 schedule+0x40/0x90 exit_to_usermode_loop+0x6b/0xa0 prepare_exit_to_usermode+0x7a/0x90 retint_user+0x8/0x20 RIP: 0033:0x7fa3b87fda87 RSP: 002b:00007ffe41206568 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02 RAX: 0000000000000000 RBX: 00000000010e88c0 RCX: 00007fa3b87fda87 RDX: 0000000000000000 RSI: 00000000010e89c8 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 000000000000015e R11: 0000000000000246 R12: 00000000010c8060 R13: 00007ffe41206690 R14: 0000000000000000 R15: 0000000000000000 ---[ end trace e88f83bf0cfbd07d ]--- Fixes: f2e9ad212def50bcf4c098c6288779dd97fff0f0 Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com>