aboutsummaryrefslogtreecommitdiffstats
path: root/fs/nfs
AgeCommit message (Collapse)Author
2015-06-11nfs: deny backchannel RPCs with an incorrect authflavor instead of dropping themJeff Layton
A drop should really only be done when the frame is malformed or we have reason to think that there is some sort of DoS going on. When we get an RPC with bad auth, we should send back an error instead. Cc: Andy Adamson <William.Adamson@netapp.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-11nfs: Only update callback sequnce id when CB_SEQUENCE successKinglong Mee
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED. It is caused by nfs return NFS4ERR_DELAY before validate_seqid(), don't update the sequnce id, but nfsd updates the sequnce id !!! According to RFC5661 20.9.3, " If CB_SEQUENCE returns an error, then the state of the slot (sequence ID, cached reply) MUST NOT change. " Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-10NFS: Convert use of __constant_htonl to htonlVaishali Thakkar
In little endian cases, the macro htonl unfolds to __swab32 which provides special case for constants. In big endian cases, __constant_htonl and htonl expand directly to the same expression. So, replace __constant_htonl with htonl with the goal of getting rid of the definition of __constant_htonl completely. The semantic patch that performs this transformation is as follows: @@expression x;@@ - __constant_htonl(x) + htonl(x) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-10NFS: Remove unused nfs_rw_ops->rw_release() functionAnna Schumaker
This was only ever set to nfs_writeback_release_common(), a function which is completely empty. Let's just drop this function pointer and simplify the code a bit. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-10NFSv4: handle nfs4_get_referral failureDominique Martinet
nfs4_proc_lookup_common is supposed to return a posix error, we have to handle any error returned that isn't errno Reported-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Frank S. Filz <ffilzlnx@mindspring.com> Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-10sunrpc: keep a count of swapfiles associated with the rpc_clntJeff Layton
Jerome reported seeing a warning pop when working with a swapfile on NFS. The nfs_swap_activate can end up calling sk_set_memalloc while holding the rcu_read_lock and that function can sleep. To fix that, we need to take a reference to the xprt while holding the rcu_read_lock, set the socket up for swapping and then drop that reference. But, xprt_put is not exported and having NFS deal with the underlying xprt is a bit of layering violation anyway. Fix this by adding a set of activate/deactivate functions that take a rpc_clnt pointer instead of an rpc_xprt, and have nfs_swap_activate and nfs_swap_deactivate call those. Also, add a per-rpc_clnt atomic counter to keep track of the number of active swapfiles associated with it. When the counter does a 0->1 transition, we enable swapping on the xprt, when we do a 1->0 transition we disable swapping on it. This also allows us to be a bit more selective with the RPC_TASK_SWAPPER flag. If non-swapper and swapper clnts are sharing a xprt, then we only need to flag the tasks from the swapper clnt with that flag. Acked-by: Mel Gorman <mgorman@suse.de> Reported-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-04NFSv4: nfs4_handle_delegation_recall_error should ignore EAGAINTrond Myklebust
EAGAIN is a valid return code from nfs4_open_recover(), and should be handled by nfs4_handle_delegation_recall_error by simply passing it through. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02writeback: separate out include/linux/backing-dev-defs.hTejun Heo
With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: move backing_dev_info->bdi_stat[] into bdi_writebackTejun Heo
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02NFS: drop unneeded gotoJulia Lawall
Delete jump to a label on the next line, when that label is not used elsewhere. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier l; @@ -if (...) goto l; -l: // </smpl> Also drop the unnecessary ret variable. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02NFS: Fix size of NFSACL SETACL operationsChuck Lever
When encoding the NFSACL SETACL operation, reserve just the estimated size of the ACL rather than a fixed maximum. This eliminates needless zero padding on the wire that the server ignores. Fixes: ee5dc7732bd5 ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02NFS: report more appropriate block size for directories.NeilBrown
In glibc 2.21 (and several previous), a call to opendir() will result in a 32K (BUFSIZ*4) buffer being allocated and passed to getdents. However a call to fdopendir() results in an 'fstat' request to determine block size and a matching buffer allocated for subsequent use with getdents. This will typically be 1M. The first getdents call on an NFS directory will always use READDIR_PLUS (or NFSv4 equivalent) if available. Subsequent getdents calls only use this more expensive version if some 'stat' requests are made between the getdents calls. For this reason it is good to keep at least that first getdents call relatively short. When fdopendir() and readdir() is used on a large directory, it takes approximately 32 times as long to complete as using "opendir". Current versions of 'find' use fdopendir() and demonstrate this slowness. 'stat' on a directory currently returns the 'wsize'. This number has no meaning on directories. Actual READDIR requests are limited to ->dtsize, which itself is capped at 4 pages, coincidently the same as BUFSIZ*4. So this is a meaningful number to use as the blocksize on directories, and has the effect of making 'find' on large directories go a lot faster. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02NFSv4: Always drain the slot table before re-establishing the leaseTrond Myklebust
While the NFSv4.1 code has always drained the slot tables in order to stop non-recovery related RPC calls when doing lease recovery, the NFSv4 code did not. The reason for the difference in behaviour is that NFSv4 does not have session state, and so RPC calls can in theory proceed while recovery is happening. In practice, however, anything I/O or state related needs to wait until recovery is over. This patch changes the behaviour of NFSv4 to match that of NFSv4.1 so that we can simplify the state recovery code by assuming that we do not have to deal with races between recovery and ordinary I/O. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-01fixing infinite OPEN loop in 4.0 stateid recoveryOlga Kornievskaia
Problem: When an operation like WRITE receives a BAD_STATEID, even though recovery code clears the RECLAIM_NOGRACE recovery flag before recovering the open state, because of clearing delegation state for the associated inode, nfs_inode_find_state_and_recover() gets called and it makes the same state with RECLAIM_NOGRACE flag again. As a results, when we restart looking over the open states, we end up in the infinite loop instead of breaking out in the next test of state flags. Solution: unset the RECLAIM_NOGRACE set because of calling of nfs_inode_find_state_and_recover() after returning from calling recover_open() function. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-28kernel/params: constify struct kernel_param_ops usesLuis R. Rodriguez
Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-13nfs: take extra reference to fl->fl_file when running a setlkJeff Layton
We had a report of a crash while stress testing the NFS client: BUG: unable to handle kernel NULL pointer dereference at 0000000000000150 IP: [<ffffffff8127b698>] locks_get_lock_context+0x8/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge stp llc ebtables ip6table_security ip6table_mangle ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw ip6table_filter ip6_tables iptable_security iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw coretemp crct10dif_pclmul ppdev crc32_pclmul crc32c_intel ghash_clmulni_intel vmw_balloon serio_raw vmw_vmci i2c_piix4 shpchp parport_pc acpi_cpufreq parport nfsd auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi scsi_transport_spi mptscsih mptbase e1000 ata_generic pata_acpi CPU: 1 PID: 399 Comm: kworker/1:1H Not tainted 4.1.0-0.rc1.git0.1.fc23.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/30/2013 Workqueue: rpciod rpc_async_schedule [sunrpc] task: ffff880036aea7c0 ti: ffff8800791f4000 task.ti: ffff8800791f4000 RIP: 0010:[<ffffffff8127b698>] [<ffffffff8127b698>] locks_get_lock_context+0x8/0x90 RSP: 0018:ffff8800791f7c00 EFLAGS: 00010293 RAX: ffff8800791f7c40 RBX: ffff88001f2ad8c0 RCX: ffffe8ffffc80305 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8800791f7c88 R08: ffff88007fc971d8 R09: 279656d600000000 R10: 0000034a01000000 R11: 279656d600000000 R12: ffff88001f2ad918 R13: ffff88001f2ad8c0 R14: 0000000000000000 R15: 0000000100e73040 FS: 0000000000000000(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 0000000001c0b000 CR4: 00000000000407e0 Stack: ffffffff8127c5b0 ffff8800791f7c18 ffffffffa0171e29 ffff8800791f7c58 ffffffffa0171ef8 ffff8800791f7c78 0000000000000246 ffff88001ea0ba00 ffff8800791f7c40 ffff8800791f7c40 00000000ff5d86a3 ffff8800791f7ca8 Call Trace: [<ffffffff8127c5b0>] ? __posix_lock_file+0x40/0x760 [<ffffffffa0171e29>] ? rpc_make_runnable+0x99/0xa0 [sunrpc] [<ffffffffa0171ef8>] ? rpc_wake_up_task_queue_locked.part.35+0xc8/0x250 [sunrpc] [<ffffffff8127cd3a>] posix_lock_file_wait+0x4a/0x120 [<ffffffffa03e4f12>] ? nfs41_wake_and_assign_slot+0x32/0x40 [nfsv4] [<ffffffffa03bf108>] ? nfs41_sequence_done+0xd8/0x2d0 [nfsv4] [<ffffffffa03c116d>] do_vfs_lock+0x2d/0x30 [nfsv4] [<ffffffffa03c251d>] nfs4_lock_done+0x1ad/0x210 [nfsv4] [<ffffffffa0171a30>] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [<ffffffffa0171a30>] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [<ffffffffa0171a5c>] rpc_exit_task+0x2c/0xa0 [sunrpc] [<ffffffffa0167450>] ? call_refreshresult+0x150/0x150 [sunrpc] [<ffffffffa0172640>] __rpc_execute+0x90/0x460 [sunrpc] [<ffffffffa0172a25>] rpc_async_schedule+0x15/0x20 [sunrpc] [<ffffffff810baa1b>] process_one_work+0x1bb/0x410 [<ffffffff810bacc3>] worker_thread+0x53/0x480 [<ffffffff810bac70>] ? process_one_work+0x410/0x410 [<ffffffff810bac70>] ? process_one_work+0x410/0x410 [<ffffffff810c0b38>] kthread+0xd8/0xf0 [<ffffffff810c0a60>] ? kthread_worker_fn+0x180/0x180 [<ffffffff817a1aa2>] ret_from_fork+0x42/0x70 [<ffffffff810c0a60>] ? kthread_worker_fn+0x180/0x180 Jean says: "Running locktests with a large number of iterations resulted in a client crash. The test run took a while and hasn't finished after close to 2 hours. The crash happened right after I gave up and killed the test (after 107m) with Ctrl+C." The crash happened because a NULL inode pointer got passed into locks_get_lock_context. The call chain indicates that file_inode(filp) returned NULL, which means that f_inode was NULL. Since that's zeroed out in __fput, that suggests that this filp pointer outlived the last reference. Looking at the code, that seems possible. We copy the struct file_lock that's passed in, but if the task is signalled at an inopportune time we can end up trying to use that file_lock in rpciod context after the process that requested it has already returned (and possibly put its filp reference). Fix this by taking an extra reference to the filp when we allocate the lock info, and put it in nfs4_lock_release. Reported-by: Jean Spector <jean@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-13nfs: stat(2) fails during cthon04 basic test5 on NFSv4.0Chuck Lever
When running the Connectathon basic tests against a Solaris NFS server over NFSv4.0, test5 reports that stat(2) returns a file size of zero instead of 1MB. On success, nfs_commit_inode() can return a positive result; see other call sites such as nfs_file_fsync_commit() and nfs_commit_unstable_pages(). The call site recently added in nfs_wb_all() does not prevent that positive return value from leaking to its callers. If it leaks through nfs_sync_inode() back to nfs_getattr(), that causes stat(2) to return a positive return value to user space while also not filling in the passed-in struct stat. Additional clean up: the new logic in nfs_wb_all() is rewritten in bfields-normal form. Fixes: 5bb89b4702e2 ("NFSv4.1/pnfs: Separate out metadata . . .") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-05-10don't pass nameidata to ->follow_link()Al Viro
its only use is getting passed to nd_jump_link(), which can obtain it from current->nameidata Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10new ->follow_link() and ->put_link() calling conventionsAl Viro
a) instead of storing the symlink body (via nd_set_link()) and returning an opaque pointer later passed to ->put_link(), ->follow_link() _stores_ that opaque pointer (into void * passed by address by caller) and returns the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic symlinks) and pointer to symlink body for normal symlinks. Stored pointer is ignored in all cases except the last one. Storing NULL for opaque pointer (or not storing it at all) means no call of ->put_link(). b) the body used to be passed to ->put_link() implicitly (via nameidata). Now only the opaque pointer is. In the cases when we used the symlink body to free stuff, ->follow_link() now should store it as opaque pointer in addition to returning it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-26Merge tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Another set of mainly bugfixes and a couple of cleanups. No new functionality in this round. Highlights include: Stable patches: - Fix a regression in /proc/self/mountstats - Fix the pNFS flexfiles O_DIRECT support - Fix high load average due to callback thread sleeping Bugfixes: - Various patches to fix the pNFS layoutcommit support - Do not cache pNFS deviceids unless server notifications are enabled - Fix a SUNRPC transport reconnection regression - make debugfs file creation failure non-fatal in SUNRPC - Another fix for circular directory warnings on NFSv4 "junctioned" mountpoints - Fix locking around NFSv4.2 fallocate() support - Truncating NFSv4 file opens should also sync O_DIRECT writes - Prevent infinite loop in rpcrdma_ep_create() Features: - Various improvements to the RDMA transport code's handling of memory registration - Various code cleanups" * tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits) fs/nfs: fix new compiler warning about boolean in switch nfs: Remove unneeded casts in nfs NFS: Don't attempt to decode missing directory entries Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one" NFS: Rename idmap.c to nfs4idmap.c NFS: Move nfs_idmap.h into fs/nfs/ NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h NFS: Add a stub for GETDEVICELIST nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes nfs: fix DIO good bytes calculation nfs: Fetch MOUNTED_ON_FILEID when updating an inode sunrpc: make debugfs file creation failure non-fatal nfs: fix high load average due to callback thread sleeping NFS: Reduce time spent holding the i_mutex during fallocate() NFS: Don't zap caches on fallocate() xprtrdma: Make rpcrdma_{un}map_one() into inline functions xprtrdma: Handle non-SEND completions via a callout xprtrdma: Add "open" memreg op xprtrdma: Add "destroy MRs" memreg op xprtrdma: Add "reset MRs" memreg op ...
2015-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-24direct-io: only inc/dec inode->i_dio_count for file systemsJens Axboe
do_blockdev_direct_IO() increments and decrements the inode ->i_dio_count for each IO operation. It does this to protect against truncate of a file. Block devices don't need this sort of protection. For a capable multiqueue setup, this atomic int is the only shared state between applications accessing the device for O_DIRECT, and it presents a scaling wall for that. In my testing, as much as 30% of system time is spent incrementing and decrementing this value. A mixed read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with better latencies too. Before: clat percentiles (usec): | 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34], | 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35], | 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80], | 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155], | 99.99th=[ 165] After: clat percentiles (usec): | 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149], | 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171], | 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270], | 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422], | 99.99th=[ 438] In other setups, Robert Elliott reported seeing good performance improvements: https://lkml.org/lkml/2015/4/3/557 The more applications accessing the device, the worse it gets. Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells do_blockdev_direct_IO() that it need not worry about incrementing or decrementing the inode i_dio_count for this caller. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Elliott, Robert (Server Storage) <elliott@hp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-23Merge branch 'bugfixes'Trond Myklebust
* bugfixes: NFSv4: Return delegations synchronously in evict_inode SUNRPC: Fix a regression when reconnecting NFS: remount with security change should return EINVAL nfs: do not export discarded symbols NFSv4.1: don't export static symbol
2015-04-23fs/nfs: fix new compiler warning about boolean in switchAndre Przywara
The brand new GCC 5.1.0 warns by default on using a boolean in the switch condition. This results in the following warning: fs/nfs/nfs4proc.c: In function 'nfs4_proc_get_rootfh': fs/nfs/nfs4proc.c:3100:10: warning: switch condition has boolean value [-Wswitch-bool] switch (auth_probe) { ^ This code was obviously using switch to make use of the fall-through semantics (without the usual comment, though). Rewrite that code using if statements to avoid the warning and make the code a bit more readable on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23nfs: Remove unneeded casts in nfsFiro Yang
Don't unnecessarily cast allocation return value in fs/nfs/inode.c::nfs_alloc_inode(). Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Don't attempt to decode missing directory entriesBenjamin Coddington
If a READDIR reply comes back without any page data, avoid a NULL pointer dereference in xdr_copy_to_scratch(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffff813a378d>] memcpy+0xd/0x110 ... Call Trace: ? xdr_inline_decode+0x7a/0xb0 [sunrpc] nfs3_decode_dirent+0x73/0x320 [nfsv3] nfs_readdir_page_filler+0xd5/0x4e0 [nfs] ? nfs3_rpc_wrapper.constprop.9+0x42/0xc0 [nfsv3] nfs_readdir_xdr_to_array+0x1fa/0x330 [nfs] ? mem_cgroup_commit_charge+0xac/0x160 ? nfs_readdir_xdr_to_array+0x330/0x330 [nfs] nfs_readdir_filler+0x22/0x90 [nfs] do_read_cache_page+0x7e/0x1a0 read_cache_page+0x1c/0x20 nfs_readdir+0x18e/0x660 [nfs] ? nfs3_xdr_dec_getattr3res+0x80/0x80 [nfsv3] iterate_dir+0x97/0x130 SyS_getdents+0x94/0x120 ? fillonedir+0xd0/0xd0 system_call_fastpath+0x12/0x17 Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one"Nicolas Iooss
This reverts commit 5a254d08b086d80cbead2ebcee6d2a4b3a15587a. Since commit 5a254d08b086 ("nfs: replace nfs_add_stats with nfs_inc_stats when add one"), nfs_readpage and nfs_do_writepage use nfs_inc_stats to increment NFSIOS_READPAGES and NFSIOS_WRITEPAGES instead of nfs_add_stats. However nfs_inc_stats does not do the same thing as nfs_add_stats with value 1 because these functions work on distinct stats: nfs_inc_stats increments stats from "enum nfs_stat_eventcounters" (in server->io_stats->events) and nfs_add_stats those from "enum nfs_stat_bytecounters" (in server->io_stats->bytes). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Fixes: 5a254d08b086 ("nfs: replace nfs_add_stats with nfs_inc_stats...") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Rename idmap.c to nfs4idmap.cAnna Schumaker
I added the nfs4 prefix to make it obvious that this file is built into the NFS v4 module, and not the generic client. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Move nfs_idmap.h into fs/nfs/Anna Schumaker
This file is only used internally to the NFS v4 module, so it doesn't need to be in the global include path. I also renamed it from nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.hAnna Schumaker
The idmapper is completely internal to the NFS v4 module, so this macro will always evaluate to true. This patch also removes unnecessary includes of this file from the generic NFS client. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Add a stub for GETDEVICELISTAnna Schumaker
d4b18c3e (pnfs: remove GETDEVICELIST implementation) removed the GETDEVICELIST operation from the NFS client, but left a "hole" in the nfs4_procedures array. This caused /proc/self/mountstats to report an operation named "51" where GETDEVICELIST used to be. This patch adds a stub to fix mountstats. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Fixes: d4b18c3e (pnfs: remove GETDEVICELIST implementation) Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23nfs: remove WARN_ON_ONCE from nfs_direct_good_bytesPeng Tao
For flexfiles driver, we might choose to read from mirror index other than 0 while mirror_count is always 1 for read. Reported-by: Jean Spector <jean@primarydata.com> Cc: <stable@vger.kernel.org> # v3.19+ Cc: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23nfs: fix DIO good bytes calculationPeng Tao
For direct read that has IO size larger than rsize, we'll split it into several READ requests and nfs_direct_good_bytes() would count completed bytes incorrectly by eating last zero count reply. Fix it by handling mirror and non-mirror cases differently such that we only count mirrored writes differently. This fixes 5fadeb47("nfs: count DIO good bytes correctly with mirroring"). Reported-by: Jean Spector <jean@primarydata.com> Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23nfs: Fetch MOUNTED_ON_FILEID when updating an inodeAnna Schumaker
2ef47eb1 (NFS: Fix use of nfs_attr_use_mounted_on_fileid()) was a good start to fixing a circular directory structure warning for NFS v4 "junctioned" mountpoints. Unfortunately, further testing continued to generate this error. My server is configured like this: anna@nfsd ~ % df Filesystem Size Used Avail Use% Mounted on /dev/vda1 9.1G 2.0G 6.5G 24% / /dev/vdc1 1014M 33M 982M 4% /exports /dev/vdc2 1014M 33M 982M 4% /exports/vol1 /dev/vdc3 1014M 33M 982M 4% /exports/vol1/vol2 anna@nfsd ~ % cat /etc/exports /exports/ *(rw,async,no_subtree_check,no_root_squash) /exports/vol1/ *(rw,async,no_subtree_check,no_root_squash) /exports/vol1/vol2 *(rw,async,no_subtree_check,no_root_squash) I've been running chown across the entire mountpoint twice in a row to hit this problem. The first run succeeds, but the second one fails with the circular directory warning along with: anna@client ~ % dmesg [Apr 3 14:28] NFS: server 192.168.100.204 error: fileid changed fsid 0:39: expected fileid 0x100080, got 0x80 WHere 0x80 is the mountpoint's fileid and 0x100080 is the mounted-on fileid. This patch fixes the issue by requesting an updated mounted-on fileid from the server during nfs_update_inode(), and then checking that the fileid stored in the nfs_inode matches either the fileid or mounted-on fileid returned by the server. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23nfs: fix high load average due to callback thread sleepingJeff Layton
Chuck pointed out a problem that crept in with commit 6ffa30d3f734 (nfs: don't call blocking operations while !TASK_RUNNING). Linux counts tasks in uninterruptible sleep against the load average, so this caused the system's load average to be pinned at at least 1 when there was a NFSv4.1+ mount active. Not a huge problem, but it's probably worth fixing before we get too many complaints about it. This patch converts the code back to use TASK_INTERRUPTIBLE sleep, simply has it flush any signals on each loop iteration. In practice no one should really be signalling this thread at all, so I think this is reasonably safe. With this change, there's also no need to game the hung task watchdog so we can also convert the schedule_timeout call back to a normal schedule. Cc: <stable@vger.kernel.org> Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Fixes: commit 6ffa30d3f734 (“nfs: don't call blocking . . .”) Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Reduce time spent holding the i_mutex during fallocate()Anna Schumaker
At the very least, we should not be taking the i_mutex until after checking if the server even supports ALLOCATE or DEALLOCATE, allowing v4.0 or v4.1 to exit without potentially waiting on a lock. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Don't zap caches on fallocate()Anna Schumaker
This patch adds a GETATTR to the end of ALLOCATE and DEALLOCATE operations so we can set the updated inode size and change attribute directly. DEALLOCATE will still need to release pagecache pages, so nfs42_proc_deallocate() now calls truncate_pagecache_range() before contacting the server. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull third hunk of vfs changes from Al Viro: "This contains the ->direct_IO() changes from Omar + saner generic_write_checks() + dealing with fcntl()/{read,write}() races (mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of repeatedly looking at ->f_flags, which can be changed by fcntl(2), check ->ki_flags - which cannot) + infrastructure bits for dhowells' d_inode annotations + Christophs switch of /dev/loop to vfs_iter_write()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits) block: loop: switch to VFS ITER_BVEC configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode VFS: Make pathwalk use d_is_reg() rather than S_ISREG() VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR() VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk NFS: Don't use d_inode as a variable name VFS: Impose ordering on accesses of d_inode and d_flags VFS: Add owner-filesystem positive/negative dentry checks nfs: generic_write_checks() shouldn't be done on swapout... ocfs2: use __generic_file_write_iter() mirror O_APPEND and O_DIRECT into iocb->ki_flags switch generic_write_checks() to iocb and iter ocfs2: move generic_write_checks() before the alignment checks ocfs2_file_write_iter: stop messing with ppos udf_file_write_iter: reorder and simplify fuse: ->direct_IO() doesn't need generic_write_checks() ext4_file_write_iter: move generic_write_checks() up xfs_file_aio_write_checks: switch to iocb/iov_iter generic_write_checks(): drop isblk argument blkdev_write_iter: expand generic_file_checks() call in there ...
2015-04-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patchbomb from Andrew Morton: - the rest of MM - various misc bits - add ability to run /sbin/reboot at reboot time - printk/vsprintf changes - fiddle with seq_printf() return value * akpm: (114 commits) parisc: remove use of seq_printf return value lru_cache: remove use of seq_printf return value tracing: remove use of seq_printf return value cgroup: remove use of seq_printf return value proc: remove use of seq_printf return value s390: remove use of seq_printf return value cris fasttimer: remove use of seq_printf return value cris: remove use of seq_printf return value openrisc: remove use of seq_printf return value ARM: plat-pxa: remove use of seq_printf return value nios2: cpuinfo: remove use of seq_printf return value microblaze: mb: remove use of seq_printf return value ipc: remove use of seq_printf return value rtc: remove use of seq_printf return value power: wakeup: remove use of seq_printf return value x86: mtrr: if: remove use of seq_printf return value linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK MAINTAINERS: CREDITS: remove Stefano Brivio from B43 .mailmap: add Ricardo Ribalda CREDITS: add Ricardo Ribalda Delgado ...
2015-04-15kernel: conditionally support non-root users, groups and capabilitiesIulia Manda
There are a lot of embedded systems that run most or all of their functionality in init, running as root:root. For these systems, supporting multiple users is not necessary. This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for non-root users, non-root groups, and capabilities optional. It is enabled under CONFIG_EXPERT menu. When this symbol is not defined, UID and GID are zero in any possible case and processes always have all capabilities. The following syscalls are compiled out: setuid, setregid, setgid, setreuid, setresuid, getresuid, setresgid, getresgid, setgroups, getgroups, setfsuid, setfsgid, capget, capset. Also, groups.c is compiled out completely. In kernel/capability.c, capable function was moved in order to avoid adding two ifdef blocks. This change saves about 25 KB on a defconfig build. The most minimal kernels have total text sizes in the high hundreds of kB rather than low MB. (The 25k goes down a bit with allnoconfig, but not that much. The kernel was booted in Qemu. All the common functionalities work. Adding users/groups is not possible, failing with -ENOSYS. Bloat-o-meter output: add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Iulia Manda <iulia.manda21@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15Merge branch 'for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs update from Al Viro: "Now that net-next went in... Here's the next big chunk - killing ->aio_read() and ->aio_write(). There'll be one more pile today (direct_IO changes and generic_write_checks() cleanups/fixes), but I'd prefer to keep that one separate" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) ->aio_read and ->aio_write removed pcm: another weird API abuse infinibad: weird APIs switched to ->write_iter() kill do_sync_read/do_sync_write fuse: use iov_iter_get_pages() for non-splice path fuse: switch to ->read_iter/->write_iter switch drivers/char/mem.c to ->read_iter/->write_iter make new_sync_{read,write}() static coredump: accept any write method switch /dev/loop to vfs_iter_write() serial2002: switch to __vfs_read/__vfs_write ashmem: use __vfs_read() export __vfs_read() autofs: switch to __vfs_write() new helper: __vfs_write() switch hugetlbfs to ->read_iter() coda: switch to ->read_iter/->write_iter ncpfs: switch to ->read_iter/->write_iter net/9p: remove (now-)unused helpers p9_client_attach(): set fid->uid correctly ...
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15NFS: Don't use d_inode as a variable nameDavid Howells
Don't use d_inode as a variable name as it now masks a function name. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15nfs: generic_write_checks() shouldn't be done on swapout...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge first patchbomb from Andrew Morton: - arch/sh updates - ocfs2 updates - kernel/watchdog feature - about half of mm/ * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits) Documentation: update arch list in the 'memtest' entry Kconfig: memtest: update number of test patterns up to 17 arm: add support for memtest arm64: add support for memtest memtest: use phys_addr_t for physical addresses mm: move memtest under mm mm, hugetlb: abort __get_user_pages if current has been oom killed mm, mempool: do not allow atomic resizing memcg: print cgroup information when system panics due to panic_on_oom mm: numa: remove migrate_ratelimited mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE mm: split ET_DYN ASLR from mmap ASLR s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE mm: expose arch_mmap_rnd when available s390: standardize mmap_rnd() usage powerpc: standardize mmap_rnd() usage mips: extract logic for mmap_rnd() arm64: standardize mmap_rnd() usage x86: standardize mmap_rnd() usage arm: factor out mmap ASLR into mmap_rnd ...
2015-04-14page_writeback: clean up mess around cancel_dirty_page()Konstantin Khlebnikov
This patch replaces cancel_dirty_page() with a helper function account_page_cleaned() which only updates counters. It's called from truncate_complete_page() and from try_to_free_buffers() (hack for ext3). Page is locked in both cases, page-lock protects against concurrent dirtiers: see commit 2d6d7f982846 ("mm: protect set_page_dirty() from ongoing truncation"). Delete_from_page_cache() shouldn't be called for dirty pages, they must be handled by caller (either written or truncated). This patch treats final dirty accounting fixup at the end of __delete_from_page_cache() as a debug check and adds WARN_ON_ONCE() around it. If something removes dirty pages without proper handling that might be a bug and unwritten data might be lost. Hugetlbfs has no dirty pages accounting, ClearPageDirty() is enough here. cancel_dirty_page() in nfs_wb_page_cancel() is redundant. This is helper for nfs_invalidate_page() and it's called only in case complete invalidation. The mess was started in v2.6.20 after commits 46d2277c796f ("Clean up and make try_to_free_buffers() not race with dirty pages") and 3e67c0987d75 ("truncate: clear page dirtiness before running try_to_free_buffers()") first was reverted right in v2.6.20 in commit ecdfc9787fe5 ("Resurrect 'try_to_free_buffers()' VM hackery"), second in v2.6.25 commit a2b345642f53 ("Fix dirty page accounting leak with ext3 data=journal"). Custom fixes were introduced between these points. NFS in v2.6.23, commit 1b3b4a1a2deb ("NFS: Fix a write request leak in nfs_invalidate_page()"). Kludge in __delete_from_page_cache() in v2.6.24, commit 3a6927906f1b ("Do dirty page accounting when removing a page from the page cache"). Since v2.6.25 all of them are redundant. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-11mirror O_APPEND and O_DIRECT into iocb->ki_flagsAl Viro
... avoiding write_iter/fcntl races. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11switch generic_write_checks() to iocb and iterAl Viro
... returning -E... upon error and amount of data left in iter after (possible) truncation upon success. Note, that normal case gives a non-zero (positive) return value, so any tests for != 0 _must_ be updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Conflicts: fs/ext4/file.c
2015-04-11generic_write_checks(): drop isblk argumentAl Viro
all remaining callers are passing 0; some just obscure that fact. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11direct_IO: remove rw from a_ops->direct_IO()Omar Sandoval
Now that no one is using rw, remove it completely. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>