| Age | Commit message (Collapse) | Author |
|---|
|
The raid0 MD personality does not start a raid0 array with any of its
data devices missing.
dm-raid was removing data/metadata device pairs unconditionally if it
failed to read a superblock off the respective metadata device of such
pair, resulting in failure to start arrays with the raid0 personality.
Avoid removing any data/metadata device pairs in case of raid0
(e.g. lvm2 segment type 'raid0_meta') thus allowing MD to start the
array.
Also, avoid region size validation for raid0.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
attempt_restore_of_faulty_devices() is limited to 64 when it should support
the new maximum of 253 when identifying any failed devices. It clears any
revivable devices via an MD personality hot remove and add cylce to allow
for their recovery.
Address by using existing functions to retrieve and update all failed
devices' bitfield members in the dm raid superblocks on all RAID devices
and check for any devices to clear in it.
Whilst on it, don't call attempt_restore_of_faulty_devices() for any MD
personality not providing disk hot add/remove methods (i.e. raid0 now),
because such personalities don't support reviving of failed disks.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
'lvchange --refresh RaidLV' causes a mapped device suspend/resume cycle
aiming at device restore and resync after transient device failures. This
failed because flag RT_FLAG_RS_RESUMED was always cleared in the suspend path,
thus the device restore wasn't performed in the resume path.
Solve by removing RT_FLAG_RS_RESUMED from the suspend path and resume
unconditionally. Also, remove superfluous comment from raid_resume().
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
On LVM2 conversions via lvconvert(8), the target keeps mapped devices in
frozen state when requesting RAID devices be resynchronized. This
applies to e.g. adding legs to a raid1 device or taking over from raid0
to raid4 when the rebuild flag's set on the new raid1 legs or the added
dedicated parity stripe.
Also, fix frozen recovery for reshaping as well.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Increase mempool size from 16 to 64 entries. This increase improves
swap on dm-crypt performance.
When swapping to dm-crypt, all available memory is temporarily exhausted
and dm-crypt can only use the mempool reserve.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use local_irq_save() to disable preemption before calling
this_cpu_ptr().
Reported-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Fixes: b0b477c7e0dd ("dm round robin: use percpu 'repeat_count' and 'current_path'")
Cc: stable@vger.kernel.org # 4.6+
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:
- Fix a race condition when updating cooling device, which may lead to
a situation where a thermal governor never updates the cooling
device. From Michele Di Giorgio.
- Fix a zero division error when disabling the forced idle injection
from the intel powerclamp. From Petr Mladek.
- Add suspend/resume callback for intel_pch_thermal thermal driver.
From Srinivas Pandruvada.
- Another two fixes for clocking cooling driver and hwmon sysfs I/F.
From Michele Di Giorgio and Kuninori Morimoto.
[ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look
like a fix, but I'm letting it slide.. - Linus ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: clock_cooling: Fix missing mutex_init()
thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs
thermal: fix race condition when updating cooling device
thermal/powerclamp: Prevent division by zero when counting interval
thermal: intel_pch_thermal: Add suspend/resume callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- support for nr_cpus= command line argument (maxcpus was previously
changed to allow secondary CPUs to be hot-plugged)
- ARM PMU interrupt handling fix
- fix potential TLB conflict in the hibernate code
- improved handling of EL1 instruction aborts (better error reporting)
- removal of useless jprobes code for stack saving/restoring
- defconfig updates
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO
arm64: defconfig: add options for virtualization and containers
arm64: hibernate: handle allocation failures
arm64: hibernate: avoid potential TLB conflict
arm64: Handle el1 synchronous instruction aborts cleanly
arm64: Remove stack duplicating code from jprobes
drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property
drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock
arm64: Support hard limit of cpu count by nr_cpus
|
|
Pull block fixes from Jens Axboe:
- an NVMe fix from Gabriel, fixing a suspend/resume issue on some
setups
- addition of a few missing entries in the block queue sysfs
documentation, from Joe
- a fix for a sparse shadow warning for the bvec iterator, from
Johannes
- a writeback deadlock involving raid issuing barriers, and not
flushing the plug when we wakeup the flusher threads. From
Konstantin
- a set of patches for the NVMe target/loop/rdma code, from Roland and
Sagi
* 'for-linus' of git://git.kernel.dk/linux-block:
bvec: avoid variable shadowing warning
doc: update block/queue-sysfs.txt entries
nvme: Suspend all queues before deletion
mm, writeback: flush plugged IO in wakeup_flusher_threads()
nvme-rdma: Remove unused includes
nvme-rdma: start async event handler after reconnecting to a controller
nvmet: Fix controller serial number inconsistency
nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads
nvmet-rdma: Correctly handle RDMA device hot removal
nvme-rdma: Make sure to shutdown the controller if we can
nvme-loop: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Free the I/O tags when we delete the controller
nvme-rdma: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Fix device removal handling
nvme-rdma: Queue ns scanning after a sucessful reconnection
nvme-rdma: Don't leak uninitialized memory in connect request private data
|
|
Pull VFIO fix from Alex Williamson:
"Fix oops when dereferencing empty data (Alex Williamson)"
* tag 'vfio-v4.8-rc2' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix NULL pointer oops in error interrupt setup handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Two hibernation fixes allowing it to work with the recently added
randomization of the kernel identity mapping base on x86-64 and one
cpufreq driver regression fix.
Specifics:
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level if
address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq driver
that causes it to crash due to an out-of-bounds array access
(Akshay Adiga)"
* tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Restore processor state before using per-CPU variables
x86/power/64: Always create temporary identity mapping correctly
cpufreq: powernv: Fix crash in gpstate_timer_handler()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc fixes: a /dev/rtc regression fix, two APIC timer period
calibration fixes, an ARM clocksource driver fix and a NOHZ
power use regression fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup
x86/timers/apic: Inform TSC deadline clockevent device about recalibration
x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error
timers: Fix get_next_timer_interrupt() computation
clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered
|
|
* pm-sleep:
PM / hibernate: Restore processor state before using per-CPU variables
x86/power/64: Always create temporary identity mapping correctly
* pm-cpufreq:
cpufreq: powernv: Fix crash in gpstate_timer_handler()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A fix for an MSI regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Make sure PCI MSIs are activated early
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"A fix for EFI capsules and an SGI UV platform fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/capsule: Allocate whole capsule into virtual memory
x86/platform/uv: Skip UV runtime services mapping in the efi_runtime_disabled case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix for the nd_blk (NVDIMM Block Window Aperture) driver.
A spec clarification requires the driver to mask off reserved bits in
status register. This is tagged for -stable back to the v4.2 kernel.
- Fix for a kernel crash in the nvdimm unit tests when module loading
is interrupted with SIGTERM. Tagged for -stable since validation
efforts external to Intel use the unit tests for qualifying
backports.
- Add a new 'size' sysfs attribute for the BTT (NVDIMM Block
Translation Table) driver to make it symmetric with the other
namespace personality drivers (PFN and DAX) that provide a size
attribute for indicating how much namespace capacity is lost to
metadata.
The BTT change arrived at the start of the merge window and has
appeared in a -next release. It can technically wait for 4.9, but it
is small, fixes asymmetry in the libnvdimm-sysfs interface, and
something I would have squeezed into the v4.8 pull request had it
arrived a few days earlier.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: fix SIGTERM vs hotplug crash
nvdimm, btt: add a size attribute for BTTs
libnvdimm, nd_blk: mask off reserved status bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some powerpc fixes for 4.8:
Misc:
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering"
* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
selftests/powerpc: Specify we expect to build with std=gnu99
powerpc/vdso: Fix build rules to rebuild vdsos correctly
powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
powerpc/32: Fix crash during static key init
powerpc: Update obsolete comment in setup_32.c about early_init()
powerpc: Print the kernel load address at the end of prom_init()
powerpc/ptrace: Fix coredump since ptrace TM changes
powerpc/32: Fix csum_partial_copy_generic()
cxl: Set psl_fir_cntl to production environment value
powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
powerpc/pci: Fix endian bug in fixed PHB numbering
powerpc/eeh: Switch to conventional PCI address output in EEH log
cxl: Fix sparse warnings
cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
cxl: Use fixed width predefined types in data structure.
powerpc/vdso: Add missing include file
powerpc: Fix unused function warning 'lmb_to_memblock'
powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
...
|
|
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Misc fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: deprecate old transport
virtio/s390: keep early_put_chars
virtio_blk: Fix a slient kernel panic
virtio-vsock: fix include guard typo
vhost/vsock: fix vhost virtio_vsock_pkt use-after-free
9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()
virtio: fix error handling for debug builds
virtio: fix memory leak in virtqueue_add()
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch for a NULL dereference bug introduced in 4.8-rc1 and a handful
of static checker fixes"
* tag 'ceph-for-4.8-rc2' of https://github.com/ceph/ceph-client:
ceph: initialize pathbase in the !dentry case in encode_caps_cb()
rbd: nuke the 32-bit pool id check
rbd: destroy header_oloc in rbd_dev_release()
ceph: fix null pointer dereference in ceph_flush_snaps()
libceph: using kfree_rcu() to simplify the code
libceph: make cancel_generic_request() static
libceph: fix return value check in alloc_msg_with_page_vector()
|
|
When nvme_delete_queue fails in the first pass of the
nvme_disable_io_queues() loop, we return early, failing to suspend all
of the IO queues. Later, on the nvme_pci_disable path, this causes us
to disable MSI without actually having freed all the IRQs, which
triggers the BUG_ON in free_msi_irqs(), as show below.
This patch refactors nvme_disable_io_queues to suspend all queues before
start submitting delete queue commands. This way, we ensure that we
have at least returned every IRQ before continuing with the removal
path.
[ 487.529200] kernel BUG at ../drivers/pci/msi.c:368!
cpu 0x46: Vector: 700 (Program Check) at [c0000078c5b83650]
pc: c000000000627a50: free_msi_irqs+0x90/0x200
lr: c000000000627a40: free_msi_irqs+0x80/0x200
sp: c0000078c5b838d0
msr: 9000000100029033
current = 0xc0000078c5b40000
paca = 0xc000000002bd7600 softe: 0 irq_happened: 0x01
pid = 1376, comm = kworker/70:1H
kernel BUG at ../drivers/pci/msi.c:368!
Linux version 4.7.0.mainline+ (root@iod76) (gcc version 5.3.1 20160413
(Ubuntu/IBM 5.3.1-14ubuntu2.1) ) #104 SMP Fri Jul 29 09:20:17 CDT 2016
enter ? for help
[c0000078c5b83920] d0000000363b0cd8 nvme_dev_disable+0x208/0x4f0 [nvme]
[c0000078c5b83a10] d0000000363b12a4 nvme_timeout+0xe4/0x250 [nvme]
[c0000078c5b83ad0] c0000000005690e4 blk_mq_rq_timed_out+0x64/0x110
[c0000078c5b83b40] c00000000056c930 bt_for_each+0x160/0x170
[c0000078c5b83bb0] c00000000056d928 blk_mq_queue_tag_busy_iter+0x78/0x110
[c0000078c5b83c00] c0000000005675d8 blk_mq_timeout_work+0xd8/0x1b0
[c0000078c5b83c50] c0000000000e8cf0 process_one_work+0x1e0/0x590
[c0000078c5b83ce0] c0000000000e9148 worker_thread+0xa8/0x660
[c0000078c5b83d80] c0000000000f2090 kthread+0x110/0x130
[c0000078c5b83e30] c0000000000095f0 ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
According to UEFI 2.6 section 7.5.3, the capsule should be in contiguous
virtual memory and firmware may consume the capsule immediately. To
correctly implement this functionality, the kernel driver needs to vmap
the entire capsule at the time it is made available to firmware.
The virtual allocation of the capsule update has been changed from kmap,
which was only allocating the first page of the update, to vmap, and
allocates the entire data payload.
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Cc: <stable@vger.kernel.org> # v4.7
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kweh Hock Leong <hock.leong.kweh@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1470912120-22831-3-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Original patch: https://lkml.org/lkml/2016/8/4/32
If riocm_ch_alloc() fails then we end up dereferencing the error
pointer.
The problem is that we're not unwinding in the reverse order from how we
allocate things so it gets confusing. I've changed this around so now
"ch" is NULL when we are done with it after we call riocm_put_channel().
That way we can check if it's NULL and avoid calling riocm_put_channel()
on it twice.
I renamed err_nodev to err_put_new_ch so that it better reflects what
the goto does.
Then because we had flipping things around, it means we don't neeed to
initialize the pointers to NULL and we can remove an if statement and
pull things in an indent level.
Link: http://lkml.kernel.org/r/20160805152406.20713-1-alexandre.bounine@idt.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Switch the setting of psl_fir_cntl from debug to production
environment recommended value. It mostly affects the PSL behavior when
an error is raised in psl_fir1/2.
Tested with cxlflash.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver update from Darren Hart:
"dell-wmi: ignore battery remove/insert event"
* tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
dell-wmi: Ignore WMI event 0xe00e
|
|
Pull drm fixes from Dave Airlie:
"This contains a bunch of amdgpu fixes, and some i915 regression fixes.
It also contains some fixes for an older regression with some EDID
changes and some 6bpc panels.
Then there are the lockdep, cirrus and rcar-du regression fixes from
this window"
* tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/cirrus: Fix NULL pointer dereference when registering the fbdev
drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".
drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"
drm/edid: Add 6 bpc quirk for display AEO model 0.
drm: Paper over locking inversion after registration rework
drm: rcar-du: Link HDMI encoder with bridge
drm/ttm: Wait for a BO to become idle before unbinding it from GTT
drm/i915/fbdev: Check for the framebuffer before use
drm/amdgpu: update golden setting of polaris10
drm/amdgpu: update golden setting of stoney
drm/amdgpu: update golden setting of polaris11
drm/amdgpu: update golden setting of carrizo
drm/amdgpu: update golden setting of iceland
drm/amd/amdgpu: change pptable output format from ASCII to binary
drm/amdgpu/ci: add mullins to default case for smc ucode
drm/amdgpu/gmc7: add missing mullins case
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
|
|
Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is
initialized") fixed async scan for ipr, but broke sync scan for ipr.
This fixes sync scan back up.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch 19a469a58720 ("drivers/perf: arm-pmu: Handle per-interrupt
affinity mask") added support for partitionned PPI setups, but
inadvertently broke setups using SPIs without the "interrupt-affinity"
property (which is the case for UP platforms).
This patch restore the broken functionnality by testing whether the
interrupt is percpu or not instead of relying on the using_spi flag
that really means "SPI *and* interrupt-affinity property".
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 19a469a58720 ("drivers/perf: arm-pmu: Handle per-interrupt affinity mask")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
arm_pmu_mutex is never held long and we don't want to sleep while the
lock is being held as it's executed in the context of hotplug notifiers.
So it can be converted to a simple spinlock instead.
Without this patch we get the following warning:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/2
no locks held by swapper/2/0.
irq event stamp: 381314
hardirqs last enabled at (381313): _raw_spin_unlock_irqrestore+0x7c/0x88
hardirqs last disabled at (381314): cpu_die+0x28/0x48
softirqs last enabled at (381294): _local_bh_enable+0x28/0x50
softirqs last disabled at (381293): irq_enter+0x58/0x78
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.7.0 #12
Call trace:
dump_backtrace+0x0/0x220
show_stack+0x24/0x30
dump_stack+0xb4/0xf0
___might_sleep+0x1d8/0x1f0
__might_sleep+0x5c/0x98
mutex_lock_nested+0x54/0x400
arm_perf_starting_cpu+0x34/0xb0
cpuhp_invoke_callback+0x88/0x3d8
notify_cpu_starting+0x78/0x98
secondary_start_kernel+0x108/0x1a8
This patch converts the mutex to spinlock to eliminate the above
warnings. This constraints pmu->reset to be non-blocking call which is
the case with all the ARM PMU backends.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Fixes: 37b502f121ad ("arm/perf: Fix hotplug state machine conversion")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
ceph_file_layout::pool_id is now s64. rbd_add_get_pool_id() and
ceph_pg_poolid_by_name() both return an int, so it's bogus anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
There only ever have been two host implementations of the old
s390-virtio (pre-ccw) transport: the experimental kuli userspace,
and qemu. As qemu switched its default to ccw with 2.4 (with most
users having used ccw well before that) and removed the old transport
entirely in 2.6, s390-virtio probably hasn't been in active use for
quite some time and is therefore likely to bitrot.
Let's start the slow march towards removing the code by deprecating
it.
Note that this also deprecates the early virtio console code, which
has been causing trouble in the guest without being wired up in any
relevant hypervisor code.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In case the registration of the hvc tty never happens AND the kernel
thinks that hvc0 is the preferred console we should keep the early
printk function to avoid a kernel panic due to code being removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We do a lot of memory allocation in function init_vq, and don't handle
the allocation failure properly. Then this function will return 0,
although initialization fails due to lacking memory. At that moment,
kernel will panic in guest machine, if virtio is used to drive disk.
To fix this bug, we should take care of allocation failure, and return
correct value to let caller know what happen.
Tested-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Stash the packet length in a local variable before handing over
ownership of the packet to virtio_transport_recv_pkt() or
virtio_transport_free_pkt().
This patch solves the use-after-free since pkt is no longer guaranteed
to be alive.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
On error, virtqueue_add calls START_USE but not
END_USE. Thankfully that's normally empty anyway,
but might not be when debugging. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When using the indirect buffers feature, 'desc' is allocated in
virtqueue_add() but isn't freed before leaving on a ring full error,
causing a memory leak.
For example, it seems rather clear that this can trigger
with virtio net if mergeable buffers are not used.
Cc: stable@vger.kernel.org
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Bharat Kumar Gogada reported issues with the generic MSI code, where the
end-point ended up with garbage in its MSI configuration (both for the vector
and the message).
It turns out that the two MSI paths in the kernel are doing slightly different
things:
generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP
PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI
And it turns out that end-points are allowed to latch the content of the MSI
configuration registers as soon as MSIs are enabled. In Bharat's case, the
end-point ends up using whatever was there already, which is not what you
want.
In order to make things converge, we introduce a new MSI domain flag
(MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set,
this flag forces the programming of the end-point as soon as the MSIs are
allocated.
A consequence of this is that we have an extra activate in irq_startup, but
that should be without much consequence.
tglx:
- Several people reported a VMWare regression with PCI/MSI-X passthrough. It
turns out that the patch also cures that issue.
- We need to have a look at the MSI disable interrupt path, where we write
the msg to all zeros without disabling MSI in the PCI device. Is that
correct?
Fixes: 52f518a3a7c2 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts"
Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru>
Reported-by: Matthias Prager <linux@matthiasprager.de>
Reported-by: Jason Taylor <jason.taylor@simplivity.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Make native_irq_wait() static and use NULL rather than 0 to initialise
phb->cfg_data in cxl_pci_vphb_add() to remove sparse warnings.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit f67a6722d650 ("cxl: Workaround PE=0 hardware limitation in
Mellanox CX4") added a "min_pe" field to struct cxl_service_layer_ops,
to allow us to work around a Mellanox CX-4 hardware limitation.
When allocating the PE number in cxl_context_init(), we read from
ctx->afu->adapter->native->sl_ops->min_pe to get the minimum PE number.
Unsurprisingly, in a PowerVM guest ctx->afu->adapter->native is NULL,
and guests don't have a cxl_service_layer_ops struct anywhere.
Move min_pe from struct cxl_service_layer_ops to struct cxl so it's
accessible in both native and PowerVM environments. For the Mellanox
CX-4, set the min_pe value in set_sl_ops().
Fixes: f67a6722d650 ("cxl: Workaround PE=0 hardware limitation in Mellanox CX4")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
cirrus_modeset_init() is initializing/registering the emulated fbdev
and, since commit c61b93fe51b1 ("drm/atomic: Fix remaining places where
!funcs->best_encoder is valid"), DRM internals can access/test some of
the fields in mode_config->funcs as part of the fbdev registration
process.
Make sure dev->mode_config.funcs is properly set to avoid dereferencing
a NULL pointer.
Reported-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid")
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
According to E-EDID spec 1.3, table 3.9, a digital video sink with the
"DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x
TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned".
For such displays, the DFP spec 1.0, section 3.10 "EDID support" says:
"If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.)
without extensions, the host will make the following assumptions:
1. 24-bit MSB-aligned RGB TFT
2. DE polarity is active high
3. H and V syncs are active high
4. Established CRT timings will be used
5. Dithering will not be enabled on the host"
So if we don't know the bit depth of the display from additional
colorimetry info we should assume 8 bpc / 24 bpp by default.
This patch adds info->bpc = 8 assignement for that case.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
is unknown"
This reverts commit 013dd9e03872
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown")
This commit introduced a regression into stable kernels,
as it reduces output color depth to 6 bpc for any video
sink connected to a Displayport connector if that sink
doesn't report a specific color depth via EDID, or if
our EDID parser doesn't actually recognize the proper
bpc from EDID.
Affected are active DisplayPort->VGA converters and
active DisplayPort->DVI converters. Both should be
able to handle 8 bpc, but are degraded to 6 bpc with
this patch.
The reverted commit was meant to fix
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331
A followup patch implements a fix for that specific bug,
which is caused by a faulty EDID of the affected DP panel
by adding a new EDID quirk for that panel.
DP 18 bpp fallback handling and other improvements to
DP sink bpc detection will be handled for future
kernels in a separate series of patches.
Please backport to stable.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331
reports that the "AEO model 0" display is driven with 8 bpc
without dithering by default, which looks bad because that
panel is apparently a 6 bpc DP panel with faulty EDID.
A fix for this was made by commit 013dd9e03872
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown").
That commit triggers new regressions in precision for DP->DVI and
DP->VGA displays. A patch is out to revert that commit, but it will
revert video output for the AEO model 0 panel to 8 bpc without
dithering.
The EDID 1.3 of that panel, as decoded from the xrandr output
attached to that bugzilla bug report, is somewhat faulty, and beyond
other problems also sets the "DFP 1.x compliant TMDS" bit, which
according to DFP spec means to drive the panel with 8 bpc and
no dithering in absence of other colorimetry information.
Try to make the original bug reporter happy despite the
faulty EDID by adding a quirk to mark that panel as 6 bpc,
so 6 bpc output with dithering creates a nice picture.
Tested by injecting the edid from the fdo bug into a DP connector
via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering
is selected.
This patch should be backported to stable.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull lkdtm update from Kees Cook:
"Fix rebuild problem with LKDTM's rodata test"
[ This, and the usercopy branch, both came in before the merge window
closed, but ended up in my 'need to look more' queue and thus got
merged only after rc1 was out ]
* tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm: Fix targets for objcopy usage
lkdtm: fix false positive warning from -Wmaybe-uninitialized
|
|
There are multiple cases in vfio_pci_set_ctx_trigger_single() where
we assume we can safely read from our data pointer without actually
checking whether the user has passed any data via the count field.
VFIO_IRQ_SET_DATA_NONE in particular is entirely broken since we
attempt to pull an int32_t file descriptor out before even checking
the data type. The other data types assume the data pointer contains
one element of their type as well.
In part this is good news because we were previously restricted from
doing much sanitization of parameters because it was missed in the
past and we didn't want to break existing users. Clearly DATA_NONE
is completely broken, so it must not have any users and we can fix
it up completely. For DATA_BOOL and DATA_EVENTFD, we'll just
protect ourselves, returning error when count is zero since we
previously would have oopsed.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Chris Thompson <the_cartographer@hotmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
|
|
Purely cosmetic at this point, as rbd doesn't use RADOS namespaces and
hence rbd_dev->header_oloc->pool_ns is always NULL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
WMI event 0xe00e is received when battery was removed or inserted.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
To be consistent with other namespaces, expose a 'size' attribute for
BTT devices also.
Cc: Dan Williams <dan.j.williams@intel.com>
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The "NVDIMM Block Window Driver Writer's Guide":
http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
...defines the layout of the block window status register. For the July
2016 version of the spec linked to above, this happens in Figure 4 on
page 26.
The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The
rest of the bits in the status register are reserved, and there is a
warning following the diagram that says:
Note: The driver cannot assume the value of the RESERVED bits in the
status register are zero. These reserved bits need to be masked off, and
the driver must avoid checking the state of those bits.
This change ensures that for hardware implementations that set these
reserved bits in the status register, the driver won't incorrectly fail the
block I/Os.
Cc: <stable@vger.kernel.org> #v4.2+
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
for-linus
Sagi writes:
Mostly stability fixes for nvmet, rdma:
- fix uninitialized rdma_cm private data from Roland.
- rdma device removal handling (host and target).
- fix controller disconnect during active mounts.
- fix namespaces lost after fabric reconnects.
- remove redundant calls to namespace removal (rdma, loop).
- actually send controller shutdown when disconnecting.
- reconnect fixes (ns rescan and aen requeue)
- nvmet controller serial number inconsistency fix.
|
Heinz Mauelshagen
Mikulas Patocka
Mike Snitzer
Linus Torvalds
Rafael J. Wysocki
Gabriel Krisman Bertazi
Austin Christ
Dan Carpenter
Ingo Molnar
Frederic Barrat
Brian King
Marc Zyngier
Sudeep Holla
Ilya Dryomov
Cornelia Huck
Christian Borntraeger
Minfei Huang
Stefan Hajnoczi
Michael S. Tsirkin
Wei Yongjun
Andrew Donnellan
Boris Brezillon
Mario Kleiner
Alex Williamson
Pali Rohár
Vishal Verma
Ross Zwisler
Jens Axboe