Age | Commit message (Collapse) | Author |
|
In Multi-PF (Socket Direct) configurations, when a loopback packet is
sent through one of the secondary devices, it will always be received
on the primary device. This causes the loopback layer to fail in
identifying the loopback packet as the devices are different.
To avoid false test failures, disable the loopback self-test in
Multi-PF configurations.
Fixes: ed29705e4ed1 ("net/mlx5: Enable SD feature")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add()
callback returns error, zone_rule->attr is used uninitiated. Fix it to
use attr which has the needed pointer value.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000110
RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
…
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x140
? asm_exc_page_fault+0x22/0x30
? mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
? mlx5_tc_ct_entry_add_rule+0x1d5/0x2f0 [mlx5_core]
mlx5_tc_ct_block_flow_offload+0xc6a/0xf90 [mlx5_core]
? nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table]
nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table]
flow_offload_work_handler+0x142/0x320 [nf_flow_table]
? finish_task_switch.isra.0+0x15b/0x2b0
process_one_work+0x16c/0x320
worker_thread+0x28c/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xb8/0xf0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 7fac5c2eced3 ("net/mlx5: CT: Avoid reusing modify header context for natted entries")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Non-uplink representor port does not support XDP. The patch clears
the xdp feature by checking the net_device_ops.ndo_bpf is set or not.
Verify using the netlink tool:
$ tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump dev-get
Representor netdev before the patch:
{'ifindex': 8,
'xdp-features': {'basic',
'ndo-xmit',
'ndo-xmit-sg',
'redirect',
'rx-sg',
'xsk-zerocopy'},
'xdp-rx-metadata-features': set(),
'xdp-zc-max-segs': 1,
'xsk-features': set()},
With the patch:
{'ifindex': 8,
'xdp-features': set(),
'xdp-rx-metadata-features': set(),
'xsk-features': set()},
Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573da8 ("nfs: add support for large folios")).
Fixes: 84d1bb2b139e ("net/mlx5e: kTLS, Limit DUMP wqe size")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The referenced commits introduced a two-step process for deleting FTEs:
- Lock the FTE, delete it from hardware, set the hardware deletion function
to NULL and unlock the FTE.
- Lock the parent flow group, delete the software copy of the FTE, and
remove it from the xarray.
However, this approach encounters a race condition if a rule with the same
match value is added simultaneously. In this scenario, fs_core may set the
hardware deletion function to NULL prematurely, causing a panic during
subsequent rule deletions.
To prevent this, ensure the active flag of the FTE is checked under a lock,
which will prevent the fs_core layer from attaching a new steering rule to
an FTE that is in the process of deletion.
[ 438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func
[ 438.968205] ------------[ cut here ]------------
[ 438.968654] refcount_t: decrement hit 0; leaking memory.
[ 438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110
[ 438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower]
[ 438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ #8
[ 438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110
[ 438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90
[ 438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286
[ 438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000
[ 438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0
[ 438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0
[ 438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0
[ 438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0
[ 438.980607] FS: 00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
[ 438.983984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0
[ 438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 438.986507] Call Trace:
[ 438.986799] <TASK>
[ 438.987070] ? __warn+0x7d/0x110
[ 438.987426] ? refcount_warn_saturate+0xfb/0x110
[ 438.987877] ? report_bug+0x17d/0x190
[ 438.988261] ? prb_read_valid+0x17/0x20
[ 438.988659] ? handle_bug+0x53/0x90
[ 438.989054] ? exc_invalid_op+0x14/0x70
[ 438.989458] ? asm_exc_invalid_op+0x16/0x20
[ 438.989883] ? refcount_warn_saturate+0xfb/0x110
[ 438.990348] mlx5_del_flow_rules+0x2f7/0x340 [mlx5_core]
[ 438.990932] __mlx5_eswitch_del_rule+0x49/0x170 [mlx5_core]
[ 438.991519] ? mlx5_lag_is_sriov+0x3c/0x50 [mlx5_core]
[ 438.992054] ? xas_load+0x9/0xb0
[ 438.992407] mlx5e_tc_rule_unoffload+0x45/0xe0 [mlx5_core]
[ 438.993037] mlx5e_tc_del_fdb_flow+0x2a6/0x2e0 [mlx5_core]
[ 438.993623] mlx5e_flow_put+0x29/0x60 [mlx5_core]
[ 438.994161] mlx5e_delete_flower+0x261/0x390 [mlx5_core]
[ 438.994728] tc_setup_cb_destroy+0xb9/0x190
[ 438.995150] fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
[ 438.995650] fl_change+0x11a4/0x13c0 [cls_flower]
[ 438.996105] tc_new_tfilter+0x347/0xbc0
[ 438.996503] ? ___slab_alloc+0x70/0x8c0
[ 438.996929] rtnetlink_rcv_msg+0xf9/0x3e0
[ 438.997339] ? __netlink_sendskb+0x4c/0x70
[ 438.997751] ? netlink_unicast+0x286/0x2d0
[ 438.998171] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 438.998625] netlink_rcv_skb+0x54/0x100
[ 438.999020] netlink_unicast+0x203/0x2d0
[ 438.999421] netlink_sendmsg+0x1e4/0x420
[ 438.999820] __sock_sendmsg+0xa1/0xb0
[ 439.000203] ____sys_sendmsg+0x207/0x2a0
[ 439.000600] ? copy_msghdr_from_user+0x6d/0xa0
[ 439.001072] ___sys_sendmsg+0x80/0xc0
[ 439.001459] ? ___sys_recvmsg+0x8b/0xc0
[ 439.001848] ? generic_update_time+0x4d/0x60
[ 439.002282] __sys_sendmsg+0x51/0x90
[ 439.002658] do_syscall_64+0x50/0x110
[ 439.003040] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes")
Fixes: cefc23554fc2 ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The number of PCI vectors allocated by the platform (which may be fewer
than requested) is currently not honored when creating the SF pool;
only the PCI MSI-X capability is considered.
As a result, when a platform allocates fewer vectors
(in non-dynamic mode) than requested, the PF and SF pools end up
with an invalid vector range.
This causes incorrect SF vector accounting, which leads to the
following call trace when an invalid IRQ vector is allocated.
This issue is resolved by ensuring that the platform's vector
limit is respected for both the SF and PF pools.
Workqueue: mlx5_vhca_event0 mlx5_sf_dev_add_active_work [mlx5_core]
RIP: 0010:pci_irq_vector+0x23/0x80
RSP: 0018:ffffabd5cebd7248 EFLAGS: 00010246
RAX: ffff980880e7f308 RBX: ffff9808932fb880 RCX: 0000000000000001
RDX: 00000000000001ff RSI: 0000000000000200 RDI: ffff980880e7f308
RBP: 0000000000000200 R08: 0000000000000010 R09: ffff97a9116f0860
R10: 0000000000000002 R11: 0000000000000228 R12: ffff980897cd0160
R13: 0000000000000000 R14: ffff97a920fec0c0 R15: ffffabd5cebd72d0
FS: 0000000000000000(0000) GS:ffff97c7ff9c0000(0000) knlGS:0000000000000000
? rescuer_thread+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core.sf mlx5_core.sf.6: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
mlx5_core.sf mlx5_core.sf.7: firmware version: 32.43.356
mlx5_core.sf mlx5_core.sf.6 enpa1s0f0s4: renamed from eth0
mlx5_core.sf mlx5_core.sf.7: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IB representors depend on ETH representors, so the IB representors
should not exist without the ETH ones. When unloading the ETH
representors, the corresponding IB representors should be also
unloaded.
The commit 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
introduced the use of the ib_device_set_netdev API in IB
repsresentors. ib_device_set_netdev() increments the refcount of
the representor's netdev when loading an IB representor and
decrements it when unloading.
Without the unloading of the IB representor, the refcount of the
representor's netdev remains greater than 0, preventing it from
being unregistered.
The patch uncovered an underlying bug where the eth representor is
unloaded, without unloading the IB representor.
This issue happened when using multiport E-switch and rebooting,
causing the shutdown to hang when unloading the ETH representor
because the refcount of the representor's netdevice was greater than 0.
Call trace:
unregister_netdevice: waiting for eth3 to become free. Usage count = 2
ref_tracker: eth%d@00000000661d60f7 has 1/1 users at
ib_device_set_netdev+0x160/0x2d0 [ib_core]
mlx5_ib_vport_rep_load+0x104/0x3f0 [mlx5_ib]
mlx5_eswitch_reload_ib_reps+0xfc/0x110 [mlx5_core]
mlx5_mpesw_work+0x236/0x330 [mlx5_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
kthread+0xb8/0xe0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct kiq unmap queue timeout value.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cfe98204a06329b6b7fce1b828b7d620473181ff)
Cc: stable@vger.kernel.org # 6.11.x
|
|
The coherency flags can only be determined when the BO is locked and that
in turn is only guaranteed when the mapping is validated.
Fix the check, move the resource check into the function and add an assert
that the BO is locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: d1a372af1c3d ("drm/amdgpu: Set MTYPE in PTE based on BO flags")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1b4ca8546f5b5c482717bedb8e031227b1541539)
Cc: stable@vger.kernel.org
|
|
Currently, the pp_dpm_mclk values are reported in descending order
on SMU IP v14.0.0/1/4. Adjust to ascending order for consistency
with other clock interfaces.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d4be16ccfd5bf822176740a51ff2306679a2247e)
Cc: stable@vger.kernel.org
|
|
H264 supports 4096x4096 starting from Polaris.
HEVC also supports 4096x4096, with VCN 3 and newer 8192x4352
is supported.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 69e9a9e65b1ea542d07e3fdd4222b46e9f5a3a29)
Cc: stable@vger.kernel.org
|
|
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7e381b1ccd5e778e3d9c44c669ad38439a861d8)
Cc: stable@vger.kernel.org
|
|
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 003215f962cdf2265f126a3f4c9ad20917f87fca)
Cc: stable@vger.kernel.org
|
|
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c)
Cc: stable@vger.kernel.org
|
|
[Why]
In certain use case such as KDE login screen, there will be no atomic
commit while do the frame update.
If the Panel Replay enabled, it will cause the screen not updated and
looks like system hang.
[How]
Delay few atomic commits before enabled the Panel Replay just like PSR.
Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682
Tested-By: Corey Hickey <bugfood-c@fatooh.org>
Tested-By: James Courtier-Dutton <james.dutton@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ca628f0eddd73adfccfcc06b2a55d915bca4a342)
Cc: stable@vger.kernel.org # 6.11+
|
|
Panel Replay feature may also use the same variable with PSR.
Change the variable name and make it not specify for PSR.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7fafb7a46b38a11a19342d153f505749bf56f3e)
Cc: stable@vger.kernel.org # 6.11+
|
|
Pull virtio fixes from Michael Tsirkin:
"Several small bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix error path during device add
vp_vdpa: fix id_table array not null terminated error
virtio_pci: Fix admin vq cleanup by using correct info pointer
vDPA/ifcvf: Fix pci_read_config_byte() return code handling
Fix typo in vringh_test.c
vdpa: solidrun: Fix UB bug with devres
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
|
|
The commit 4c39529663b9 adds a warning about duplicate cache names if
CONFIG_DEBUG_VM is selected. These warnings are triggered by the dm-cache
code.
The dm-cache code allocates a slab cache for each device. This commit
changes it to allocate just one slab cache in the module init function.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 4c39529663b9 ("slab: Warn on duplicate cache names when DEBUG_VM=y")
|
|
The commit 4c39529663b9 adds a warning about duplicate cache names if
CONFIG_DEBUG_VM is selected. These warnings are triggered by the dm-bufio
code. The dm-bufio code allocates a slab cache with each client. It is
not possible to preallocate the caches in the module init function
because the size of auxiliary per-buffer data is not known at this point.
So, this commit changes dm-bufio so that it appends a unique atomic value
to the cache name, to avoid the warnings.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 4c39529663b9 ("slab: Warn on duplicate cache names when DEBUG_VM=y")
|
|
Notice that hybrid_init_cpu_capacity_scaling() only needs to hold
hybrid_capacity_lock around __hybrid_init_cpu_capacity_scaling()
calls, so introduce a "locked" wrapper around the latter and call
it from the former. This allows to drop a local variable and a
label that are not needed any more.
Also, rename __hybrid_init_cpu_capacity_scaling() to
__hybrid_refresh_cpu_capacity_scaling() for consistency.
Interestingly enough, this fixes a locking issue introduced by commit
929ebc93ccaa ("cpufreq: intel_pstate: Set asymmetric CPU capacity on
hybrid systems") that put an arch_enable_hybrid_capacity_scale() call
under hybrid_capacity_lock, which was a mistake because the latter is
acquired in CPU hotplug paths and so it cannot be held around
cpus_read_lock() calls.
Link: https://lore.kernel.org/linux-pm/SJ1PR11MB6129EDBF22F8A90FC3A3EDC8B9582@SJ1PR11MB6129.namprd11.prod.outlook.com/
Fixes: 929ebc93ccaa ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/12554508.O9o76ZdvQC@rjwysocki.net
[ rjw: Changelog update ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Backmerging to get fixes from v6.12-rc7.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of Qualcomm clk driver fixes:
- Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks
- Fix alpha PLL post_div mask for the cases where width is not
specified
- Avoid hangs in the SM8350 video driver (venus) by setting HW_CTRL
trigger feature on the video clocks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags
clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set
clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c-host fixes for v6.12-rc7 (from Andi):
- Fix designware incorrect behavior when concluding a transmission
- Fix Mule multiplexer error value evaluation"
* tag 'i2c-for-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
i2c: muxes: Fix return value check in mule_i2c_mux_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Make sure GICv3 controller interrupt activation doesn't race with a
concurrent deactivation due to propagation delays of the register
write
* tag 'irq_urgent_for_v6.12_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Force propagation of the active state with a read-back
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small remaining USB and Thunderbolt fixes and device ids
for 6.12-rc7. Included in here are:
- new USB serial driver device ids
- thunderbolt driver fixes for reported problems
- typec bugfixes
- dwc3 driver fix
- musb driver fix
All of these have been in linux-next this past week with no reported
issues"
* tag 'usb-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: qcserial: add support for Sierra Wireless EM86xx
thunderbolt: Fix connection issue with Pluggable UD-4VPD dock
usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd()
usb: dwc3: fix fault at system suspend if device was already runtime suspended
usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
usb: musb: sunxi: Fix accessing an released usb phy
USB: serial: io_edgeport: fix use after free in debug printk
USB: serial: option: add Quectel RG650V
USB: serial: option: add Fibocom FG132 0x0112 composition
thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small memory leak fixes for the vchiq_arm staging driver
that have been sitting in my tree for weeks and should get merged for
6.12-rc7 so that people don't keep tripping over them.
They both have been in linux-next for a while with no reported
problems"
* tag 'staging-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: Use devm_kzalloc() for drv_mgmt allocation
staging: vchiq_arm: Use devm_kzalloc() for vchiq_arm_state allocation
|
|
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077)
Fixes: 5ddb0bd4ddc3 ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021072818.61621-1-andyshrk@163.com
|
|
The tx_bytes should consider the actual size of the Ethernet frames
without the SPI encapsulation. But we still need to take care of
Ethernet padding.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241108114343.6174-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fix from Jens Axboe:
"Single fix for an issue triggered with PROVE_RCU=y, with nvme using
the wrong iterators for an SRCU protected list"
* tag 'block-6.12-20241108' of git://git.kernel.dk/linux:
nvme/host: Fix RCU list traversal to use SRCU primitive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix one issue in the qcom lmh thermal driver, a DT handling
issue in the thermal core and two issues in the userspace thermal
library:
- Allow tripless thermal zones defined in a DT to be registered in
accordance with the thermal DT bindings (Icenowy Zheng)
- Annotate LMH IRQs with lockdep classes to prevent lockdep from
reporting a possible recursive locking issue that cannot really
occur (Dmitry Baryshkov)
- Improve the thermal library "make clean" to remove a leftover
symbolic link created during compilation and fix the sampling
handler invocation in that library to pass the correct pointer to
it (Emil Dahl Juhl, zhang jiao)"
* tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/of: support thermal zones w/o trips subnode
tools/lib/thermal: Remove the thermal.h soft link when doing make clean
tools/lib/thermal: Fix sampling handler context ptr
thermal/drivers/qcom/lmh: Remove false lockdep backtrace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the asymmetric CPU capacity support code in the intel_pstate
driver, added during this develompent cycle, to address a corner case
in which the capacity of a CPU going online is not updated (Rafael
Wysocki)"
* tag 'pm-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Update asym capacity for CPUs that were offline initially
cpufreq: intel_pstate: Clear hybrid_max_perf_cpu before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the ACPI processor driver initialization ordering after recent
changes to avoid calling init_freq_invariance_cppc() too early on AMD
platforms (Mario Limonciello)"
* tag 'acpi-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Move arch_init_invariance_cppc() call later
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, the drivers one in ufs simply delays running a work
queue and the generic one in zoned storage switches to a more correct
API that tries the standard buddy allocator first (for small
allocations); this fixes an allocation problem with small allocations
seen under memory pressure"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Start the RTC update work later
scsi: sd_zbc: Use kvzalloc() to allocate REPORT ZONES buffer
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, usual leaders in amdgpu and xe, then a panel quirk, and
some fixes to imagination and panthor drivers. Seems around the usual
level for this time and don't know of any big problems.
amdgpu:
- Brightness fix
- DC vbios parsing fix
- ACPI fix
- SMU 14.x fix
- Power workload profile fix
- GC partitioning fix
- Debugfs fixes
imagination:
- Track PVR context per file
- Break ref-counting cycle
panel-orientation-quirks:
- Fix matching Lenovo Yoga Tab 3 X90F
panthor:
- Lock VM array
- Be strict about I/O mapping flags
xe:
- Fix ccs_mode setting for Xe2 and later
- Synchronize ccs_mode setting with client creation
- Apply scheduling WA for LNL in additional places as needed
- Fix leak and lock handling in error paths of xe_exec ioctl
- Fix GGTT allocation leak leading to eventual crash in SR-IOV
- Move run_ticks update out of job handling to avoid synchronization
with reader"
* tag 'drm-fixes-2024-11-09' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/panthor: Be stricter about IO mapping flags
drm/panthor: Lock XArray when getting entries for the VM
drm: panel-orientation-quirks: Make Lenovo Yoga Tab 3 X90F DMI match less strict
drm/xe: Stop accumulating LRC timestamp on job_free
drm/xe/pf: Fix potential GGTT allocation leak
drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL
drm/xe: Fix possible exec queue leak in exec IOCTL
drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read()
drm/amdgpu: Adjust debugfs eviction and IB access permissions
drm/amdgpu: Adjust debugfs register access permissions
drm/amdgpu: Fix DPX valid mode check on GC 9.4.3
drm/amd/pm: correct the workload setting
drm/amd/pm: always pick the pptable from IFWI
drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported
drm/amd/display: parse umc_info or vram_info based on ASIC
drm/amd/display: Fix brightness level not retained over reboot
drm/xe/guc/tlb: Flush g2h worker in case of tlb timeout
drm/xe/ufence: Flush xe ordered_wq in case of ufence timeout
drm/xe: Move LNL scheduling WA to xe_device.h
drm/xe: Use the filelist from drm for ccs_mode change
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix ccs_mode setting for Xe2 and later (Balasubramani)
- Synchronize ccs_mode setting with client creation (Balasubramani)
- Apply scheduling WA for LNL in additional places as needed
(Nirmoy)
- Fix leak and lock handling in error paths of xe_exec ioctl
(Matthew Brost)
- Fix GGTT allocation leak leading to eventual crash in SR-IOV
(Michal Wajdeczko)
- Move run_ticks update out of job handling to avoid synchronization
with reader (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ffcebtluaaaohquxfyf5babpihmtscxwad3jjmt5nggwh2xpm@ztw67ucywttg
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
imagination:
- Track PVR context per file
- Break ref-counting cycle
panel-orientation-quirks:
- Fix matching Lenovo Yoga Tab 3 X90F
panthor:
- Lock VM array
- Be strict about I/O mapping flags
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108085058.GA37468@linux.fritz.box
|
|
When the Tx FIFO is empty and the last command has no STOP bit
set, the master holds SCL low. If I2C_DYNAMIC_TAR_UPDATE is not
set, BIT(13) MST_ON_HOLD of IC_RAW_INTR_STAT is not enabled,
causing the __i2c_dw_disable() timeout. This is quite similar to
commit 2409205acd3c ("i2c: designware: fix __i2c_dw_disable() in
case master is holding SCL low"). Also check BIT(7)
MST_HOLD_TX_FIFO_EMPTY in IC_STATUS, which is available when
IC_STAT_FOR_CLK_STRETCH is set.
Fixes: 2409205acd3c ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low")
Co-developed-by: Xiaowu Ding <xiaowu.ding@jaguarmicro.com>
Signed-off-by: Xiaowu Ding <xiaowu.ding@jaguarmicro.com>
Co-developed-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Liu Peibao <loven.liu@jaguarmicro.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- dvb-core fixes for vb2 check and device registration
- v4l2-core: fix an issue with error handling for VIDIOC_G_CTRL
- vb2 core: fix an issue with vb plane copy logic
- videobuf2-core: copy vb planes unconditionally
- vivid: fix buffer overwrite when using > 32 buffers
- vivid: fix a potential division by zero due to an issue at v4l2-tpg
- some spectre vulnerability fixes
- several OOM access fixes
- some buffer overflow fixes
* tag 'media/v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2-core: copy vb planes unconditionally
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
media: vivid: fix buffer overwrite when using > 32 buffers
media: pulse8-cec: fix data timestamp at pulse8_setup()
media: cec: extron-da-hd-4k-plus: don't use -1 as an error code
media: stb0899_algo: initialize cfr before using it
media: adv7604: prevent underflow condition when reporting colorspace
media: cx24116: prevent overflows on SNR calculus
media: ar0521: don't overflow when checking PLL values
media: s5p-jpeg: prevent buffer overflows
media: av7110: fix a spectre vulnerability
media: mgb4: protect driver against spectre
media: dvb_frontend: don't play tricks with underflow values
media: dvbdev: prevent the risk of out of memory access
media: v4l2-tpg: prevent the risk of a division by zero
media: v4l2-ctrls-api: fix error handling for v4l2_g_ctrl()
media: dvb-core: add missing buffer index check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here is a (hopefully) final round of arm64 fixes for 6.12 that address
some user-visible floating point register corruption. Both of the
Marks have been working on this for a couple of weeks and we've ended
up in a position where SVE is solid but SME still has enough pending
issues that the most pragmatic solution for the release and stable
backports is to disable the feature. Yes, it's a shame, but the
hardware is rare as hen's teeth at the moment and we're better off
getting back to a known good state before fixing it all properly.
We're also improving the selftests for 6.13 to help avoid merging
broken code in the future.
Anyway, the good news is that we're removing a lot more code than
we're adding.
Summary:
- Fix handling of SVE traps from userspace on preemptible kernels
when converting the saved floating point state into SVE state.
- Remove broken support for the SMCCCv1.3 "SVE discard hint"
optimisation.
- Disable SME support, as the current support code suffers from
numerous issues around signal delivery, ptrace access and
context-switch which can lead to user-visible corruption of the
register state"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Kconfig: Make SME depend on BROKEN for now
arm64: smccc: Remove broken support for SMCCCv1.3 SVE discard hint
arm64/sve: Discard stale CPU state when handling SVE traps
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.12-rc7
Here's a fix for a long-standing use-after-free in an io_edgeport debug
printk and some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: add support for Sierra Wireless EM86xx
USB: serial: io_edgeport: fix use after free in debug printk
USB: serial: option: add Quectel RG650V
USB: serial: option: add Fibocom FG132 0x0112 composition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for drivers, nothing particularly remarkable"
* tag 'regulator-fix-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rk808: Add apply_bit for BUCK3 on RK809
regulator: rtq2208: Fix uninitialized use of regulator_config
|
|
In the error recovery path of mlx5_vdpa_dev_add(), the cleanup is
executed and at the end put_device() is called which ends up calling
mlx5_vdpa_free(). This function will execute the same cleanup all over
again. Most resources support being cleaned up twice, but the recent
mlx5_vdpa_destroy_mr_resources() doesn't.
This change drops the explicit cleanup from within the
mlx5_vdpa_dev_add() and lets mlx5_vdpa_free() do its work.
This issue was discovered while trying to add 2 vdpa devices with the
same name:
$> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.2
$> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.3
... yields the following dump:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 4 UID: 0 PID: 2811 Comm: vdpa Not tainted 6.12.0-rc6 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:destroy_workqueue+0xe/0x2a0
Code: ...
RSP: 0018:ffff88814920b9a8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888105c10000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff888100400168 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888100120c00 R09: ffffffff828578c0
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888131fd99a0 R14: 0000000000000000 R15: ffff888105c10580
FS: 00007fdfa6b4f740(0000) GS:ffff88852ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 000000018db09006 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? destroy_workqueue+0xe/0x2a0
mlx5_vdpa_destroy_mr_resources+0x2b/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x150 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_put+0x8d/0x230
mlx5_vdpa_dev_add+0x328/0x8b0 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2b8/0x4c0 [vdpa]
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? __vdpa_alloc_device+0x1b0/0x1b0 [vdpa]
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2d0
netlink_sendmsg+0x1e4/0x410
__sock_sendmsg+0x38/0x60
? sockfd_lookup_light+0x12/0x60
__sys_sendto+0x105/0x160
? __count_memcg_events+0x53/0xe0
? handle_mm_fault+0x100/0x220
? do_user_addr_fault+0x40d/0x620
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fdfa6c66b57
Code: ...
RSP: 002b:00007ffeace22998 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a498608350 RCX: 00007fdfa6c66b57
RDX: 000000000000006c RSI: 000055a498608350 RDI: 0000000000000003
RBP: 00007ffeace229c0 R08: 00007fdfa6d35200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000202 R12: 000055a4986082a0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeace233f3
</TASK>
Modules linked in: ...
CR2: 00000000000000b8
Fixes: 62111654481d ("vdpa/mlx5: Postpone MR deletion")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241105185101.1323272-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
|
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1dba ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
|
|
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET,
panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear
VM_MAYWRITE. That means userspace can use mprotect() to make the mapping
writable later on. This is a classic Linux driver gotcha.
I don't think this actually has any impact in practice:
When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and
when the GPU is not powered, the dummy_latest_flush page provided by the
driver is deliberately designed to not do any flushes, so the only thing
writing to the dummy_latest_flush could achieve would be to make *more*
flushes happen.
2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are
mappings without the VM_SHARED flag).
MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has
copy-on-write semantics, which for VM_PFNMAP are semi-supported but
fairly cursed.
In particular, in such a mapping, the driver can only install PTEs
during mmap() by calling remap_pfn_range() (because remap_pfn_range()
wants to **store the physical address of the mapped physical memory into
the vm_pgoff of the VMA**); installing PTEs later on with a fault
handler (as panthor does) is not supported in private mappings, and so
if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when
it hits a BUG() check.
Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID
doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for
the FLUSH_ID don't make sense).
Reproducers for both scenarios are in the notes of my patch on the mailing
list; I tested that these bugs exist on a Rock 5B machine.
Note that I only compile-tested the patch, I haven't tested it; I don't
have a working kernel build setup for the test machine yet. Please test it
before applying it.
Cc: stable@vger.kernel.org
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105-panthor-flush-page-fixes-v1-1-829aaf37db93@google.com
|
|
Similar to commit cac075706f29 ("drm/panthor: Fix race when converting
group handle to group object") we need to use the XArray's internal
locking when retrieving a vm pointer from there.
v2: Removed part of the patch that was trying to protect fetching
the heap pointer from XArray, as that operation is protected by
the @pool->lock.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106185806.389089-1-liviu.dudau@arm.com
|
|
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240825132131.6643-1-hdegoede@redhat.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
thunderbolt: Fixes for v6.12-rc7
This includes following USB4/Thunderbolt fixes for v6.12-rc7:
- Fix for retimer enumeration.
- Fix connection issue with Pluggable UD-4VPD USB4 dock.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix connection issue with Pluggable UD-4VPD dock
thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING
|
|
The binding emac_rockchip.txt is converted to YAML.
Changed against the original binding is an added MDIO subnode.
This make the driver failed to find the PHY, and given the 'mdio
has invalid PHY address' it is probably looking in the wrong node.
Fix emac_mdio.c so that it can handle both old and new
device trees.
Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|