| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit fb945c95a482200876993977008b67ea658bd938 ]
While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
tries to harden the sanity checks it made at the same time a regression,
i.e. mixed in and out endpoints. Obviously it should have been not tested on
real hardware at that time, but unluckily it didn't happen.
So, fix above mentioned typo and make device being enumerated again.
While here, introduce an enumerator for magic values to prevent similar issue
to happen in the future.
Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b72a251bf92ca2378530fa1f9b35a71830ab51c ]
When we allocate space in the GGTT we may have to allocate a larger
region than will be populated by the object to accommodate fencing. Make
sure that this space beyond the end of the buffer points safely into
scratch space, in case the HW tries to access it anyway (e.g. fenced
access to the last tile row).
v2: Preemptively / conservatively guard gen6 ggtt as well.
Reported-by: Imre Deak <imre.deak@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1554
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331152348.26946-1-chris@chris-wilson.co.uk
(cherry picked from commit 4d6c18590870fbac1e65dde5e01e621c8e0ca096)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69edc390a54268d41e45089cb972bf71510f5f07 ]
On TGL, bits 2-4 in the GGTT PTE are not ignored anymore and are
instead used for some extra VT-d capabilities. We don't (yet?) have
support for those capabilities, but, given that we shared the pte_encode
function betweed GGTT and PPGTT, we still set those bits to the PPGTT
PPAT values. The DMA engine gets very confused when those bits are
set while the iommu is enabled, leading to errors. E.g. when loading
the GuC we get:
[ 9.796218] DMAR: DRHD: handling fault status reg 2
[ 9.796235] DMAR: [DMA Write] Request device [00:02.0] PASID ffffffff fault addr 0 [fault reason 02] Present bit in context entry is clear
[ 9.899215] [drm:intel_guc_fw_upload [i915]] *ERROR* GuC firmware signature verification failed
To fix this, just have dedicated gen8_pte_encode function per type of
gtt. Also, explicitly set vm->pte_encode for gen8_ppgtt, even if we
don't use it, to make sure we don't accidentally assign it to the GGTT
one, like we do for gen6_ppgtt, in case we need it in the future.
Reported-by: "Sodhi, Vunny" <vunny.sodhi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226185657.26445-1-daniele.ceraolospurio@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 487eca11a321ef33bcf4ca5adb3c0c4954db1b58 ]
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8732fe46b20c951493bfc4dba0ad08efdf41de81 ]
The issues caused by:
commit 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology
mgr")
Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.
The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.
The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.
I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.
Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
vsyrjala
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a86675968e2300fb567994459da3dbc4cd1b322a ]
This reverts commit 64e62bdf04ab8529f45ed0a85122c703035dec3a.
This commit ends up causing some lockdep splats due to trying to grab the
payload lock while holding the mgr's lock:
[ 54.010099]
[ 54.011765] ======================================================
[ 54.018670] WARNING: possible circular locking dependency detected
[ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted
[ 54.031610] ------------------------------------------------------
[ 54.038516] kworker/1:6/1040 is trying to acquire lock:
[ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.054957]
[ 54.054957] but task is already holding lock:
[ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[ 54.071193]
[ 54.071193] which lock already depends on the new lock.
[ 54.071193]
[ 54.080334]
[ 54.080334] the existing dependency chain (in reverse order) is:
[ 54.088697]
[ 54.088697] -> #1 (&mgr->lock){+.+.}:
[ 54.094440] __mutex_lock+0xc3/0x498
[ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80
[ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2
[ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f
[ 54.117791] intel_encoders_pre_enable+0x63/0x70
[ 54.123532] hsw_crtc_enable+0xa1/0x722
[ 54.128396] intel_update_crtc+0x50/0x194
[ 54.133455] skl_commit_modeset_enables+0x40c/0x540
[ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d
[ 54.145418] intel_atomic_commit+0x2c8/0x2d8
[ 54.150770] drm_atomic_helper_set_config+0x5a/0x70
[ 54.156801] drm_mode_setcrtc+0x2ab/0x833
[ 54.161862] drm_ioctl+0x2e5/0x424
[ 54.166242] vfs_ioctl+0x21/0x2f
[ 54.170426] do_vfs_ioctl+0x5fb/0x61e
[ 54.175096] ksys_ioctl+0x55/0x75
[ 54.179377] __x64_sys_ioctl+0x1a/0x1e
[ 54.184146] do_syscall_64+0x5c/0x6d
[ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 54.194946]
[ 54.194946] -> #0 (&mgr->payload_lock){+.+.}:
[ 54.201463]
[ 54.201463] other info that might help us debug this:
[ 54.201463]
[ 54.210410] Possible unsafe locking scenario:
[ 54.210410]
[ 54.217025] CPU0 CPU1
[ 54.222082] ---- ----
[ 54.227138] lock(&mgr->lock);
[ 54.230643] lock(&mgr->payload_lock);
[ 54.237742] lock(&mgr->lock);
[ 54.244062] lock(&mgr->payload_lock);
[ 54.248346]
[ 54.248346] *** DEADLOCK ***
[ 54.248346]
[ 54.254959] 7 locks held by kworker/1:6/1040:
[ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.},
at: worker_thread+0x455/0x6e2
[ 54.269451] #1: ffffc9000119beb0
((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.},
at: worker_thread+0x455/0x6e2
[ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.},
at: i915_hotplug_work_func+0x4b/0x2be
[ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+},
at: i915_hotplug_work_func+0x17e/0x2be
[ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.},
at: drm_helper_probe_detect_ctx+0x40/0xfd
[ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at:
drm_modeset_lock+0x74/0xe2
[ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[ 54.334597]
[ 54.334597] stack backtrace:
[ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted
5.5.0-rc6-02274-g77381c23ee63 #47
[ 54.348893] Hardware name: Google Fizz/Fizz, BIOS
Google_Fizz.10139.39.0 01/04/2018
[ 54.357451] Workqueue: events i915_hotplug_work_func
[ 54.362995] Call Trace:
[ 54.365724] dump_stack+0x71/0x9c
[ 54.369427] check_noncircular+0x91/0xbc
[ 54.373809] ? __lock_acquire+0xc9e/0xf66
[ 54.378286] ? __lock_acquire+0xc9e/0xf66
[ 54.382763] ? lock_acquire+0x175/0x1ac
[ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.393177] ? __mutex_lock+0xc3/0x498
[ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101
[ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.426645] ? intel_digital_port_connected+0x34d/0x35c
[ 54.432482] ? intel_dp_detect+0x227/0x44e
[ 54.437056] ? ww_mutex_lock+0x49/0x9a
[ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd
[ 54.446789] ? intel_encoder_hotplug+0x4b/0x97
[ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0
[ 54.456423] ? mark_held_locks+0x53/0x68
[ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51
[ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4
[ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a
[ 54.476953] ? i915_hotplug_work_func+0x206/0x2be
[ 54.482208] ? worker_thread+0x4d5/0x6e2
[ 54.486587] ? worker_thread+0x455/0x6e2
[ 54.490966] ? queue_work_on+0x64/0x64
[ 54.495151] ? kthread+0x1e9/0x1f1
[ 54.498946] ? queue_work_on+0x64/0x64
[ 54.503130] ? kthread_unpark+0x5e/0x5e
[ 54.507413] ? ret_from_fork+0x3a/0x50
The proper fix for this is probably cleanup the VCPI allocations when we're
enabling the topology, or on the first payload allocation. For now though,
let's just revert.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology mgr")
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 72655c0ebd1d941d80f47bf614b02d563a1e61ae upstream.
This patch fixes the following two complaints:
WARNING: CPU: 3 PID: 1326 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x74/0x80
Modules linked in: scsi_debug sd_mod t10_pi brd scsi_transport_iscsi af_packet crct10dif_pclmul sg aesni_intel glue_helper virtio_balloon button crypto_simd cryptd intel_agp intel_gtt agpgart ip_tables x_tables ipv6 nf_defrag_ipv6 autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom ata_generic pata_acpi virtio_blk virtio_net net_failover failover ata_piix xhci_pci ahci libahci xhci_hcd i2c_piix4 libata virtio_pci usbcore i2c_core virtio_ring scsi_mod usb_common virtio [last unloaded: scsi_debug]
CPU: 3 PID: 1326 Comm: systemd-udevd Not tainted 5.6.0-rc1-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:mutex_destroy+0x74/0x80
Call Trace:
sr_kref_release+0xb9/0xd0 [sr_mod]
scsi_cd_put+0x79/0x90 [sr_mod]
sr_block_release+0x54/0x70 [sr_mod]
__blkdev_put+0x2ce/0x3c0
blkdev_put+0x68/0x220
blkdev_close+0x4d/0x60
__fput+0x170/0x3b0
____fput+0x12/0x20
task_work_run+0xa2/0xf0
exit_to_usermode_loop+0xeb/0xf0
do_syscall_64+0x2be/0x300
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa16d40aab7
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0x98/0x420
Read of size 8 at addr ffff8881c6e4f4b0 by task systemd-udevd/1326
CPU: 3 PID: 1326 Comm: systemd-udevd Tainted: G W 5.6.0-rc1-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x46/0x60
__kasan_report.cold+0x7b/0x94
kasan_report+0x16/0x20
check_memory_region+0x140/0x1b0
__kasan_check_read+0x15/0x20
__mutex_unlock_slowpath+0x98/0x420
mutex_unlock+0x16/0x20
sr_block_release+0x5c/0x70 [sr_mod]
__blkdev_put+0x2ce/0x3c0
hardirqs last enabled at (1875522): [<ffffffff81bb0696>] _raw_spin_unlock_irqrestore+0x56/0x70
blkdev_put+0x68/0x220
blkdev_close+0x4d/0x60
__fput+0x170/0x3b0
____fput+0x12/0x20
task_work_run+0xa2/0xf0
exit_to_usermode_loop+0xeb/0xf0
do_syscall_64+0x2be/0x300
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa16d40aab7
Allocated by task 3201:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_kmalloc+0xd/0x10
kmem_cache_alloc_trace+0x161/0x3c0
sr_probe+0x12f/0xb60 [sr_mod]
really_probe+0x183/0x5d0
driver_probe_device+0x13f/0x1a0
__device_attach_driver+0xe6/0x150
bus_for_each_drv+0x101/0x160
__device_attach+0x183/0x230
device_initial_probe+0x17/0x20
bus_probe_device+0x110/0x130
device_add+0xb7b/0xd40
scsi_sysfs_add_sdev+0xe8/0x360 [scsi_mod]
scsi_probe_and_add_lun+0xdc4/0x14c0 [scsi_mod]
__scsi_scan_target+0x12d/0x850 [scsi_mod]
scsi_scan_channel+0xcd/0xe0 [scsi_mod]
scsi_scan_host_selected+0x182/0x190 [scsi_mod]
store_scan+0x1e9/0x200 [scsi_mod]
dev_attr_store+0x42/0x60
sysfs_kf_write+0x8b/0xb0
kernfs_fop_write+0x158/0x250
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x300
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1326:
save_stack+0x23/0x90
__kasan_slab_free+0x13a/0x190
kasan_slab_free+0x12/0x20
kfree+0x109/0x410
sr_kref_release+0xc1/0xd0 [sr_mod]
scsi_cd_put+0x79/0x90 [sr_mod]
sr_block_release+0x54/0x70 [sr_mod]
__blkdev_put+0x2ce/0x3c0
blkdev_put+0x68/0x220
blkdev_close+0x4d/0x60
__fput+0x170/0x3b0
____fput+0x12/0x20
task_work_run+0xa2/0xf0
exit_to_usermode_loop+0xeb/0xf0
do_syscall_64+0x2be/0x300
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: https://lore.kernel.org/r/20200330025151.10535-1-bvanassche@acm.org
Fixes: 51a858817dcd ("scsi: sr: get rid of sr global mutex")
Cc: Merlijn Wajer <merlijn@archive.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@kernel.org>
Acked-by: Merlijn Wajer <merlijn@archive.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 51a858817dcdbbdee22cb54b0b2b26eb145ca5b6 upstream.
When replacing the Big Kernel Lock in commit 2a48fc0ab242 ("block:
autoconvert trivial BKL users to private mutex"), the lock was replaced
with a sr-wide lock.
This causes very poor performance when using multiple sr devices, as the sr
driver was not able to execute more than one command to one drive at any
given time, even when there were many CD drives available.
Replace the global mutex with per-sr-device mutex.
Someone tried this patch at the time, but it never made it upstream, due to
possible concerns with race conditions, but it's not clear the patch
actually caused those:
https://www.spinics.net/lists/linux-scsi/msg63706.html
https://www.spinics.net/lists/linux-scsi/msg63750.html
Also see
http://lists.xiph.org/pipermail/paranoia/2019-December/001647.html
Link: https://lore.kernel.org/r/20200218143918.30267-1-merlijn@archive.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Merlijn Wajer <merlijn@archive.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a169c0be75b59dd85d159493634870cdec6d3c4 upstream.
Commit 1d5c76e664333 ("xen-blkfront: switch kcalloc to kvcalloc for
large array allocation") didn't fix the issue it was meant to, as the
flags for allocating the memory are GFP_NOIO, which will lead the
memory allocation falling back to kmalloc().
So instead of GFP_NOIO use GFP_KERNEL and do all the memory allocation
in blkfront_setup_indirect() in a memalloc_noio_{save,restore} section.
Fixes: 1d5c76e664333 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200403090034.8753-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 32830a0534700f86366f371b150b17f0f0d140d7 upstream.
The wait_event() function is used to detect command completion.
When send_guid_cmd() returns an error, smi_send() has not been
called to send data. Therefore, wait_event() should not be used
on the error path, otherwise it will cause the following warning:
[ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004
[ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40
[ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010
[ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000
[ 1361.856199] Call Trace:
[ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780
[ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80
[ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler]
[ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100
[ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler]
[ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si]
[ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si]
[ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si]
[ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si]
[ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180
[ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190
[ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200
[ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0
[ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60
[ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80
[ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120
[ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120
[ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10
[ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180
Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ATA_DFLAG_DETACH is set
commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream.
During system resume from suspend, this can be observed on ASM1062 PMP
controller:
ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133
Kernel panic - not syncing: stack-protector: Kernel
in: sata_pmp_eh_recover+0xa2b/0xa40
CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40
Kernel Offset: 0xcc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is
set, sata_pmp_eh_recover() continues to run. During retry it triggers
the stack protector.
Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover()
jump to pmp_fail directly.
BugLink: https://bugs.launchpad.net/bugs/1821434
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0a72efac89d1c35ac55197895201b7b94c5e6ef upstream.
The cpufreq driver has a use-after-free that we can hit if:
a) There's an OCC message pending when the notifier is registered, and
b) The cpufreq driver fails to register with the core.
When a) occurs the notifier schedules a workqueue item to handle the
message. The backing work_struct is located on chips[].throttle and
when b) happens we clean up by freeing the array. Once we get to
the (now free) queued item and the kernel crashes.
Fixes: c5e29ea7ac14 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edcc42945dee85e9dec3737f3dbf59d917ae5418 upstream.
When requesting a rate superior to the parent's rate, it would return
-EINVAL instead of simply returning the parent's rate like it should.
Fixes: 4f89e4b8f121 ("clk: ingenic: Add driver for the TCU clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200213161952.37460-2-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c067b46d731a764fc46ecc466c2967088c97089e upstream.
Exit jz4770_cgu_init() if the 'cgu' pointer we get is NULL, since the
pointer is passed as argument to functions later on.
Fixes: 7a01c19007ad ("clk: Add Ingenic jz4770 CGU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/20200213161952.37460-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ebc68cedec4aead47d8d11623d013cca9bf8e825 upstream.
The Acer Aspire 5738z has a button to disable (and re-enable) the
touchpad next to the touchpad.
When this button is pressed a LED underneath indicates that the touchpad
is disabled (and an event is send to userspace and GNOME shows its
touchpad enabled / disable OSD thingie).
So far so good, but after re-enabling the touchpad it no longer works.
The laptop does not have an external ps2 port, so mux mode is not needed
and disabling mux mode fixes the touchpad no longer working after toggling
it off and back on again, so lets add this laptop model to the nomux list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98479ada421a8fd2123b98efd398a6f1379307ab upstream.
If we park/unpark faster than we can respond to RPS events, we never
will process a downclock event after expiring a waitboost, and thus we
will forever restart the GPU at max clocks even if the workload switches
and doesn't justify full power.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500
Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v5.5+
(cherry picked from commit 21abf0bf168dffff1192e0f072af1dc74ae1ff0e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a65a97b48694d34248195eb89bf3687403261056 upstream.
The vboxvideo driver is missing a call to remove conflicting framebuffers.
Surprisingly, when using legacy BIOS booting this does not really cause
any issues. But when using UEFI to boot the VM then plymouth will draw
on both the efifb /dev/fb0 and /dev/drm/card0 (which has registered
/dev/fb1 as fbdev emulation).
VirtualBox will actual display the output of both devices (I guess it is
showing whatever was drawn last), this causes weird artifacts because of
pitch issues in the efifb when the VM window is not sized at 1024x768
(the window will resize to its last size once the vboxvideo driver loads,
changing the pitch).
Adding the missing drm_fb_helper_remove_conflicting_pci_framebuffers()
call fixes this.
Changes in v2:
-Make the drm_fb_helper_remove_conflicting_pci_framebuffers() call one of
the first things we do in our probe() method
Cc: stable@vger.kernel.org
Fixes: 2695eae1f6d3 ("drm/vboxvideo: Switch to generic fbdev emulation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325144310.36779-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e8a36c13382b7165d23928caee8d91c1b301142 upstream.
The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.
This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)
and avoids leaking the power ref when disabling the output.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com
(cherry picked from commit f77a2db27f26c3ccba0681f7e89fef083718f07f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0f83d164fb8f3a2b7bc379a6c1e27d1123a9eab upstream.
Scatterlist elements contains both pages and DMA addresses, but one
should not assume 1:1 relation between them. The sg->length is the size
of the physical memory chunk described by the sg->page, while
sg_dma_len(sg) is the size of the DMA (IO virtual) chunk described by
the sg_dma_address(sg).
The proper way of extracting both: pages and DMA addresses of the whole
buffer described by a scatterlist it to iterate independently over the
sg->pages/sg->length and sg_dma_address(sg)/sg_dma_len(sg) entries.
Fixes: 42e67b479eab ("drm/prime: use dma length macro when mapping sg")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327162126.29705-1-m.szyprowski@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72f5b5a308c744573fdbc6c78202c52196d2c162 upstream.
[WHY]
In cases where a clock table is malformed such that fclk entries have
frequencies but not voltages listed, we don't catch the error and set
clocks to 0 instead of using hardcoded values as we should.
[HOW]
Add check for clock tables fclk entry's voltage as well
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2960758cce2310774de60bbbd8d6841d436c54d9 upstream.
Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Yuxian Dai <Yuxian.Dai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ee2bb22ddb53a2eafc675690d0d67452029ca37 upstream.
As the pmfw hasn't exported the interface of SMU feature
mask to APU SKU so just force on all the features to driver
inquired interface at early initial stage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 022ac4c9c55be35a2d1f71019a931324c51b0dab upstream.
1.Using the FCLK DPM table to set the MCLK for DPM states consist of
three entities:
FCLK
UCLK
MEMCLK
All these three clk change together, MEMCLK from FCLK, so use the fclk
frequency.
2.we should show the current working clock freqency from clock table metric
Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea36ec8623f56791c6ff6738d0509b7920f85220 upstream.
drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since
commit de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jan 15 16:51:42 2016 -0800
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
it has been illegal to combine GFP_COMP with SetPageReserved, so lets
stop doing both and leave the dma layer to its own devices.
Reported-by: Taketo Kabe
Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed1dd899baa32d47d9a93d98336472da50564346 upstream.
Report the correct perfmon domains and signals depending
on the supported feature flags.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 9e2c2e273012 ("drm/etnaviv: add infrastructure to query perf counter")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e138a63d6674a4567a018a31e467567c40b14d5 upstream.
drm_dp_link_rate_to_bw_code and ...bw_code_to_link_rate simply divide by
and multiply with 27000, respectively. Avoid an overflow in the u8 dpcd[0]
and the multiply+divide alltogether.
Signed-off-by: Torsten Duwe <duwe@lst.de>
Fixes: ff1e8fb68ea0 ("drm/bridge: analogix-anx78xx: Avoid drm_dp_link helpers")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218155744.9675368BE1@verein.lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1aaea8476d9f014667d2cb24819f9bcaf3ebb7a4 upstream.
__i915_gem_object_flush_map() takes a byte range, so feed it the written
bytes and do not mistake the u32 index as bytes!
Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk
(cherry picked from commit 30c88a47f1abd5744908d3681f54dcf823fe2a12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 723fe298ad85ad1278bd2312469ad14738953cc6 upstream.
Since commit 7723f4c5ecdb ("driver core: platform: Add an error
message to platform_get_irq*()"), platform_get_irq() calls dev_err()
on an error. As we enumerate all interrupts until platform_get_irq()
fails, we now systematically get a message such as:
"vfio-platform fff51000.ethernet: IRQ index 3 not found" which is
a false positive.
Let's use platform_get_irq_optional() instead.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Cc: stable@vger.kernel.org # v5.3+
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 835214f5d5f516a38069bc077c879c7da00d6108 upstream.
When driver is set to enable bb credit recovery, the switch displayed the
setting as inactive. If the link bounces, it switches to Active.
During link up processing, the driver currently does a MBX_READ_SPARAM
followed by a MBX_CONFIG_LINK. These mbox commands are queued to be
executed, one at a time and the completion is processed by the worker
thread. Since the MBX_READ_SPARAM is done BEFORE the MBX_CONFIG_LINK, the
BB_SC_N bit is never set the the returned values. BB Credit recovery status
only gets set after the driver requests the feature in CONFIG_LINK, which
is done after the link up. Thus the ordering of READ_SPARAM needs to follow
the CONFIG_LINK.
Fix by reordering so that READ_SPARAM is done after CONFIG_LINK. Added a
HBA_DEFER_FLOGI flag so that any FLOGI handling waits until after the
READ_SPARAM is done so that the proper BB credit value is set in the FLOGI
payload.
Fixes: 6bfb16208298 ("scsi: lpfc: Fix configuration of BB credit recovery in service parameters")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200128002312.16346-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ab384a49c548baf132ccef249f78d9c6c506380 upstream.
If a call to lpfc_get_cmd_rsp_buf_per_hdwq returns NULL (memory allocation
failure), a previously allocated lpfc_io_buf resource is leaked.
Fix by releasing the lpfc_io_buf resource in the failure path.
Fixes: d79c9e9d4b3d ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200128002312.16346-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5a244e0ea67b293abb1d26c825db2ddde5f2862f upstream.
Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if
Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is
supported by host but not actually enabled, Auto-Hibern8 error shall not
happen.
To fix this, provide a way to detect if Auto-Hibern8 is actually enabled
first, and bypass Auto-Hibern8 disabling case in
ufshcd_is_auto_hibern8_error().
Fixes: 821744403913 ("scsi: ufs: Add error-handling of Auto-Hibernate")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 819732be9fea728623e1ed84eba28def7384ad1f upstream.
v2.6.27 commit cc8c282963bd ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.
Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.
Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.
As already found for fabric topology in v4.17 commit fa89adba1941 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54ace3
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.
As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:
zfcp_erp_strategy[1479] intentionally DROPs erp lock around
zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441] NO erp lock
zfcp_erp_adapter_strategy[876] NO erp lock
zfcp_erp_adapter_strategy_open[855] NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around
zfcp_erp_action_to_running(),
BUT *_not_* around
zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432] assumes to be called with erp lock
zfcp_erp_action_enqueue[314] assumes to be called with erp lock
zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock:
lockdep_assert_held(&adapter->erp_lock);
It causes the following lockdep warning:
WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.
Fix this by using the proper locked recovery trigger helper function.
Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes: cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8962c6d2c2b8ca51b0f188109015b15fc5f4da44 upstream.
Remove the auth tag size from cryptlen before mapping the destination
in out-of-place AEAD decryption thus resolving a crash with
extended testmgr tests.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # v4.19+
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 504e84abec7a635b861afd8d7f92ecd13eaa2b09 upstream.
Make sure to only add the size of the auth tag to the source mapping
for encryption if it is an in-place operation. Failing to do this
previously caused us to try and map auth size len bytes from a NULL
mapping and crashing if both the cryptlen and assoclen are zero.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce0fc6db38decf0d2919bfe783de6d6b76e421a9 upstream.
Deal gracefully with a NULL or empty scatterlist which can happen
if both cryptlen and assoclen are zero and we're doing in-place
AEAD encryption.
This fixes a crash when this causes us to try and map a NULL page,
at least with some platforms / DMA mapping configs.
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f142b6a7b573bde6cff926f246da05652c61eb4 upstream.
Since in the software implementation of XTS-AES there is
no notion of sector every input length is processed the same way.
CAAM implementation has the notion of sector which causes different
results between the software implementation and the one in CAAM
for input lengths bigger than 512 bytes.
Increase sector size to maximum value on 16 bits.
Fixes: c6415a6016bf ("crypto: caam - add support for acipher xts(aes)")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a5a9e1ef37b030b836d92df8264f840988f4a38 upstream.
HW generates a Data Size error for chacha20 requests that are not
a multiple of 64B, since algorithm state (AS) does not have
the FINAL bit set.
Since updating req->iv (for chaining) is not required,
modify skcipher descriptors to set the FINAL bit for chacha20.
[Note that for skcipher decryption we know that ctx1_iv_off is 0,
which allows for an optimization by not checking algorithm type,
since append_dec_op1() sets FINAL bit for all algorithms except AES.]
Also drop the descriptor operations that save the IV.
However, in order to keep code logic simple, things like
S/G tables generation etc. are not touched.
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: 334d37c9e263 ("crypto: caam - update IV using HW support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Valentin Ciocoi Radulescu <valentin.ciocoi@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81d5553d1288c2ec0390f02f84d71ca0f0f9f137 upstream.
dm_clone_nr_of_hydrated_regions() returns the number of regions that
have been hydrated so far. In order to do so it employs bitmap_weight().
Until now, the return type of dm_clone_nr_of_hydrated_regions() was
unsigned long.
Because bitmap_weight() returns an int, in case BITS_PER_LONG == 64 and
the return value of bitmap_weight() is 2^31 (the maximum allowed number
of regions for a device), the result is sign extended from 32 bits to 64
bits and an incorrect value is displayed, in the status output of
dm-clone, as the number of hydrated regions.
Fix this by having dm_clone_nr_of_hydrated_regions() return an unsigned
int.
Fixes: 7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9fc06ff56845cc5ccafec52f545fc2e08d22f849 upstream.
Add missing casts when converting from regions to sectors.
In case BITS_PER_LONG == 32, the lack of the appropriate casts can lead
to overflows and miscalculation of the device sector.
As a result, we could end up discarding and/or copying the wrong parts
of the device, thus corrupting the device's data.
Fixes: 7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd481c12269b4d276f1a52eda0ebd419079bfe3a upstream.
Add overflow check for clone->nr_regions variable, which holds the
number of regions of the target.
The overflow can occur with sufficiently large devices, if BITS_PER_LONG
== 32. E.g., if the region size is 8 sectors (4K), the overflow would
occur for device sizes > 34359738360 sectors (~16TB).
This could result in multiple device sectors wrongly mapping to the same
region number, due to the truncation from 64 bits to 32 bits, which
would lead to data corruption.
Fixes: 7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b5142905d4ff58a4b93f7c8eaa7ba829c0a53c9 upstream.
There is a bug in the way dm-clone handles discards, which can lead to
discarding the wrong blocks or trying to discard blocks beyond the end
of the device.
This could lead to data corruption, if the destination device indeed
discards the underlying blocks, i.e., if the discard operation results
in the original contents of a block to be lost.
The root of the problem is the code that calculates the range of regions
covered by a discard request and decides which regions to discard.
Since dm-clone handles the device in units of regions, we don't discard
parts of a region, only whole regions.
The range is calculated as:
rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size);
re = bio_end_sector(bio) >> clone->region_shift;
, where 'rs' is the first region to discard and (re - rs) is the number
of regions to discard.
The bug manifests when we try to discard part of a single region, i.e.,
when we try to discard a block with size < region_size, and the discard
request both starts at an offset with respect to the beginning of that
region and ends before the end of the region.
The root cause is the following comparison:
if (rs == re)
// skip discard and complete original bio immediately
, which doesn't take into account that 'rs' might be greater than 're'.
Thus, we then issue a discard request for the wrong blocks, instead of
skipping the discard all together.
Fix the check to also take into account the above case, so we don't end
up discarding the wrong blocks.
Also, add some range checks to dm_clone_set_region_hydrated() and
dm_clone_cond_set_range(), which update dm-clone's region bitmap.
Note that the aforementioned bug doesn't cause invalid memory accesses,
because dm_clone_is_range_hydrated() returns True for this case, so the
checks are just precautionary.
Fixes: 7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b8fdd090376a7a46d17db316638fe54b965c2fb0 upstream.
zmd->nr_rnd_zones was increased twice by mistake. The other place it
is increased in dmz_init_zone() is the only one needed:
1131 zmd->nr_useable_zones++;
1132 if (dmz_is_rnd(zone)) {
1133 zmd->nr_rnd_zones++;
^^^
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 75fa601934fda23d2f15bf44b09c2401942d8e15 upstream.
Fix below kmemleak detected in verity_fec_ctr. output_pool is
allocated for each dm-verity-fec device. But it is not freed when
dm-table for the verity target is removed. Hence free the output
mempool in destructor function verity_fec_dtr.
unreferenced object 0xffffffffa574d000 (size 4096):
comm "init", pid 1667, jiffies 4294894890 (age 307.168s)
hex dump (first 32 bytes):
8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00 .6..f...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000060e82407>] __kmalloc+0x2b4/0x340
[<00000000dd99488f>] mempool_kmalloc+0x18/0x20
[<000000002560172b>] mempool_init_node+0x98/0x118
[<000000006c3574d2>] mempool_init+0x14/0x20
[<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0
[<000000000887261b>] verity_ctr+0x87c/0x8d0
[<000000002b1e1c62>] dm_table_add_target+0x174/0x348
[<000000002ad89eda>] table_load+0xe4/0x328
[<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0
[<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928
[<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98
[<000000005361e2e8>] el0_svc_common+0xa0/0x158
[<000000001374818f>] el0_svc_handler+0x6c/0x88
[<000000003364e9f4>] el0_svc+0x8/0xc
[<000000009d84cec9>] 0xffffffffffffffff
Fixes: a739ff3f543af ("dm verity: add support for forward error correction")
Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b93b6643e9b5a7f260b931e97f56ffa3fa65e26d upstream.
If the user specifies tag size larger than HASH_MAX_DIGESTSIZE,
there's a crash in integrity_metadata().
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1edaa447d958bec24c6a79685a5790d98976fd16 upstream.
Initializing a dm-writecache device can take a long time when the
persistent memory device is large. Add cond_resched() to a few loops
to avoid warnings that the CPU is stuck.
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2abb5792387eb188b12051337d5dcd2cba615cb0 upstream.
This allows the changelink operation to succeed if the mux_id was
specified as an argument. Note that the mux_id must match the
existing mux_id of the rmnet device or should be an unused mux_id.
Fixes: 1dc49e9d164c ("net: rmnet: do not allow to change mux id if mux id is duplicated")
Reported-and-tested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc41f11a21a51d6869d71e525a7264c748d7c0d7 upstream.
Generic protection fault type kernel panic is observed when user performs
soft (ordered) HBA unplug operation while IOs are running on drives
connected to HBA.
When user performs ordered HBA removal operation, the kernel calls PCI
device's .remove() call back function where driver is flushing out all the
outstanding SCSI IO commands with DID_NO_CONNECT host byte and also unmaps
sg buffers allocated for these IO commands.
However, in the ordered HBA removal case (unlike of real HBA hot removal),
HBA device is still alive and hence HBA hardware is performing the DMA
operations to those buffers on the system memory which are already unmapped
while flushing out the outstanding SCSI IO commands and this leads to
kernel panic.
Don't flush out the outstanding IOs from .remove() path in case of ordered
removal since HBA will be still alive in this case and it can complete the
outstanding IOs. Flush out the outstanding IOs only in case of 'physical
HBA hot unplug' where there won't be any communication with the HBA.
During shutdown also it is possible that HBA hardware can perform DMA
operations on those outstanding IO buffers which are completed with
DID_NO_CONNECT by the driver from .shutdown(). So same above fix is applied
in shutdown path as well.
It is safe to drop the outstanding commands when HBA is inaccessible such
as when permanent PCI failure happens, when HBA is in non-operational
state, or when someone does a real HBA hot unplug operation. Since driver
knows that HBA is inaccessible during these cases, it is safe to drop the
outstanding commands instead of waiting for SCSI error recovery to kick in
and clear these outstanding commands.
Link: https://lore.kernel.org/r/1585302763-23007-1-git-send-email-sreekanth.reddy@broadcom.com
Fixes: c666d3be99c0 ("scsi: mpt3sas: wait for and flush running commands on shutdown/unload")
Cc: stable@vger.kernel.org #v4.14.174+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa03481b6e2e82355c46644147b614f18c7a8161 upstream.
The incorrect traversal of the scatterlist, during the linearization phase
lead to computing the hash value of the wrong input buffer.
New implementation uses scatterwalk_map_and_copy()
to address this issue.
Cc: <stable@vger.kernel.org>
Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Signed-off-by: Rosioru Dragos <dragos.rosioru@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 791c13b709dd51eb37330f2a5837434e90c87c27 upstream.
Undefined rproc_ops .kick method in remoteproc driver will result in
"Unable to handle kernel NULL pointer dereference" in rproc_virtio_notify,
after firmware loading if:
1) .kick method wasn't defined in driver
2) resource_table exists in firmware and has "Virtio device entry" defined
Let's refuse to register an rproc-induced virtio device if no kick method was
defined for rproc.
[ 13.180049][ T415] 8<--- cut here ---
[ 13.190558][ T415] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 13.212544][ T415] pgd = (ptrval)
[ 13.217052][ T415] [00000000] *pgd=00000000
[ 13.224692][ T415] Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM
[ 13.231318][ T415] Modules linked in: rpmsg_char imx_rproc virtio_rpmsg_bus rpmsg_core [last unloaded: imx_rproc]
[ 13.241687][ T415] CPU: 0 PID: 415 Comm: unload-load.sh Not tainted 5.5.2-00002-g707df13bbbdd #6
[ 13.250561][ T415] Hardware name: Freescale i.MX7 Dual (Device Tree)
[ 13.257009][ T415] PC is at 0x0
[ 13.260249][ T415] LR is at rproc_virtio_notify+0x2c/0x54
[ 13.265738][ T415] pc : [<00000000>] lr : [<8050f6b0>] psr: 60010113
[ 13.272702][ T415] sp : b8d47c48 ip : 00000001 fp : bc04de00
[ 13.278625][ T415] r10: bc04c000 r9 : 00000cc0 r8 : b8d46000
[ 13.284548][ T415] r7 : 00000000 r6 : b898f200 r5 : 00000000 r4 : b8a29800
[ 13.291773][ T415] r3 : 00000000 r2 : 990a3ad4 r1 : 00000000 r0 : b8a29800
[ 13.299000][ T415] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 13.306833][ T415] Control: 10c5387d Table: b8b4806a DAC: 00000051
[ 13.313278][ T415] Process unload-load.sh (pid: 415, stack limit = 0x(ptrval))
[ 13.320591][ T415] Stack: (0xb8d47c48 to 0xb8d48000)
[ 13.325651][ T415] 7c40: b895b680 00000001 b898f200 803c6430 b895bc80 7f00ae18
[ 13.334531][ T415] 7c60: 00000035 00000000 00000000 b9393200 80b3ed80 00004000 b9393268 bbf5a9a2
[ 13.343410][ T415] 7c80: 00000e00 00000200 00000000 7f00aff0 7f00a014 b895b680 b895b800 990a3ad4
[ 13.352290][ T415] 7ca0: 00000001 b898f210 b898f200 00000000 00000000 7f00e000 00000001 00000000
[ 13.361170][ T415] 7cc0: 00000000 803c62e0 80b2169c 802a0924 b898f210 00000000 00000000 b898f210
[ 13.370049][ T415] 7ce0: 80b9ba44 00000000 80b9ba48 00000000 7f00e000 00000008 80b2169c 80400114
[ 13.378929][ T415] 7d00: 80b2169c 8061fd64 b898f210 7f00e000 80400744 b8d46000 80b21634 80b21634
[ 13.387809][ T415] 7d20: 80b2169c 80400614 80b21634 80400718 7f00e000 00000000 b8d47d7c 80400744
[ 13.396689][ T415] 7d40: b8d46000 80b21634 80b21634 803fe338 b898f254 b80fe76c b8d32e38 990a3ad4
[ 13.405569][ T415] 7d60: fffffff3 b898f210 b8d46000 00000001 b898f254 803ffe7c 80857a90 b898f210
[ 13.414449][ T415] 7d80: 00000001 990a3ad4 b8d46000 b898f210 b898f210 80b17aec b8a29c20 803ff0a4
[ 13.423328][ T415] 7da0: b898f210 00000000 b8d46000 803fb8e0 b898f200 00000000 80b17aec b898f210
[ 13.432209][ T415] 7dc0: b8a29c20 990a3ad4 b895b900 b898f200 8050fb7c 80b17aec b898f210 b8a29c20
[ 13.441088][ T415] 7de0: b8a29800 b895b900 b8a29a04 803c5ec0 b8a29c00 b898f200 b8a29a20 00000007
[ 13.449968][ T415] 7e00: b8a29c20 8050fd78 b8a29800 00000000 b8a29a20 b8a29c04 b8a29820 b8a299d0
[ 13.458848][ T415] 7e20: b895b900 8050e5a4 b8a29800 b8a299d8 b8d46000 b8a299e0 b8a29820 b8a299d0
[ 13.467728][ T415] 7e40: b895b900 8050e008 000041ed 00000000 b8b8c440 b8a299d8 b8a299e0 b8a299d8
[ 13.476608][ T415] 7e60: b8b8c440 990a3ad4 00000000 b8a29820 b8b8c400 00000006 b8a29800 b895b880
[ 13.485487][ T415] 7e80: b8d47f78 00000000 00000000 8050f4b4 00000006 b895b890 b8b8c400 008fbea0
[ 13.494367][ T415] 7ea0: b895b880 8029f530 00000000 00000000 b8d46000 00000006 b8d46000 008fbea0
[ 13.503246][ T415] 7ec0: 8029f434 00000000 b8d46000 00000000 00000000 8021e2e4 0000000a 8061fd0c
[ 13.512125][ T415] 7ee0: 0000000a b8af0c00 0000000a b8af0c40 00000001 b8af0c40 00000000 8061f910
[ 13.521005][ T415] 7f00: 0000000a 80240af4 00000002 b8d46000 00000000 8061fd0c 00000002 80232d7c
[ 13.529884][ T415] 7f20: 00000000 b8d46000 00000000 990a3ad4 00000000 00000006 b8a62d80 008fbea0
[ 13.538764][ T415] 7f40: b8d47f78 00000000 b8d46000 00000000 00000000 802210c0 b88f2900 00000000
[ 13.547644][ T415] 7f60: b8a62d80 b8a62d80 b8d46000 00000006 008fbea0 80221320 00000000 00000000
[ 13.556524][ T415] 7f80: b8af0c00 990a3ad4 0000006c 008fbea0 76f1cda0 00000004 80101204 00000004
[ 13.565403][ T415] 7fa0: 00000000 80101000 0000006c 008fbea0 00000001 008fbea0 00000006 00000000
[ 13.574283][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000
[ 13.583162][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 600d0030 00000001 00000000 00000000
[ 13.592056][ T415] [<8050f6b0>] (rproc_virtio_notify) from [<803c6430>] (virtqueue_notify+0x1c/0x34)
[ 13.601298][ T415] [<803c6430>] (virtqueue_notify) from [<7f00ae18>] (rpmsg_probe+0x280/0x380 [virtio_rpmsg_bus])
[ 13.611663][ T415] [<7f00ae18>] (rpmsg_probe [virtio_rpmsg_bus]) from [<803c62e0>] (virtio_dev_probe+0x1f8/0x2c4)
[ 13.622022][ T415] [<803c62e0>] (virtio_dev_probe) from [<80400114>] (really_probe+0x200/0x450)
[ 13.630817][ T415] [<80400114>] (really_probe) from [<80400614>] (driver_probe_device+0x16c/0x1ac)
[ 13.639873][ T415] [<80400614>] (driver_probe_device) from [<803fe338>] (bus_for_each_drv+0x84/0xc8)
[ 13.649102][ T415] [<803fe338>] (bus_for_each_drv) from [<803ffe7c>] (__device_attach+0xd4/0x164)
[ 13.658069][ T415] [<803ffe7c>] (__device_attach) from [<803ff0a4>] (bus_probe_device+0x84/0x8c)
[ 13.666950][ T415] [<803ff0a4>] (bus_probe_device) from [<803fb8e0>] (device_add+0x444/0x768)
[ 13.675572][ T415] [<803fb8e0>] (device_add) from [<803c5ec0>] (register_virtio_device+0xa4/0xfc)
[ 13.684541][ T415] [<803c5ec0>] (register_virtio_device) from [<8050fd78>] (rproc_add_virtio_dev+0xcc/0x1b8)
[ 13.694466][ T415] [<8050fd78>] (rproc_add_virtio_dev) from [<8050e5a4>] (rproc_start+0x148/0x200)
[ 13.703521][ T415] [<8050e5a4>] (rproc_start) from [<8050e008>] (rproc_boot+0x384/0x5c0)
[ 13.711708][ T415] [<8050e008>] (rproc_boot) from [<8050f4b4>] (state_store+0x3c/0xc8)
[ 13.719723][ T415] [<8050f4b4>] (state_store) from [<8029f530>] (kernfs_fop_write+0xfc/0x214)
[ 13.728348][ T415] [<8029f530>] (kernfs_fop_write) from [<8021e2e4>] (__vfs_write+0x30/0x1cc)
[ 13.736971][ T415] [<8021e2e4>] (__vfs_write) from [<802210c0>] (vfs_write+0xac/0x17c)
[ 13.744985][ T415] [<802210c0>] (vfs_write) from [<80221320>] (ksys_write+0x64/0xe4)
[ 13.752825][ T415] [<80221320>] (ksys_write) from [<80101000>] (ret_fast_syscall+0x0/0x54)
[ 13.761178][ T415] Exception stack(0xb8d47fa8 to 0xb8d47ff0)
[ 13.766932][ T415] 7fa0: 0000006c 008fbea0 00000001 008fbea0 00000006 00000000
[ 13.775811][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000
[ 13.784687][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206
[ 13.790442][ T415] Code: bad PC value
[ 13.839214][ T415] ---[ end trace 1fe21ecfc9f28852 ]---
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Nikita Shubin <NShubin@topcon.com>
Fixes: 7a186941626d ("remoteproc: remove the single rpmsg vdev limitation")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200306072452.24743-1-NShubin@topcon.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d96f2571dc84d128cacf1944f4ecc87834c779a6 upstream.
On secure devices after a wdog/fatal interrupt, the mba region has to be
refreshed in order to prevent the following errors during mba load.
Err Logs:
remoteproc remoteproc2: stopped remote processor 4080000.remoteproc
qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232
qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232
....
qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232
qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss
Fixes: 7dd8ade24dc2a ("remoteproc: qcom: q6v5-mss: Add custom dump function for modem")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200304194729.27979-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Andy Shevchenko
Chris Wilson
Daniele Ceraolo Spurio
Prike Liang
Lyude Paul
Bart Van Assche
Merlijn Wajer
Juergen Gross
Wen Yang
Kai-Heng Feng
Oliver O'Halloran
Paul Cercueil
Hans de Goede
Imre Deak
Marek Szyprowski
Michael Strauss
Aaron Liu
Yuxian Dai
Christian Gmeiner
Torsten Duwe
Eric Auger
James Smart
Stanley Chu
Steffen Maier
Gilad Ben-Yossef
Andrei Botila
Horia Geantă
Nikos Tsironis
Bob Liu
Shetty, Harshini X (EXT-Sony Mobile)
Mikulas Patocka
Subash Abhinov Kasiviswanathan
Sreekanth Reddy
Rosioru Dragos
Nikita Shubin
Sibi Sankar