| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit ba8e59773ae59818695d1e20b8939282da80ec8c ]
[Why]
Bandwidth calculations are triggered for non zero streams, and
in case of 0 streams, these calculations were skipped with
pstate status not being updated.
[How]
As the pstate status is applicable for non zero streams, check
added for allowing 0 streams inline with dcn internal bandwidth
validations.
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4237de2f73a669e4f89ac0aa2b44fb1a1d9ec583 ]
We need to check the NVME_LOOP_Q_LIVE flag in
nvme_loop_destroy_admin_queue() to protect against duplicate
invocations eg during concurrent reset and remove calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c5f8e882a05de5c011e8c3fbeceb0d1c590eb53 ]
When the call to nvme_enable_ctrl() in nvme_loop_configure_admin_queue()
fails the NVME_LOOP_Q_LIVE flag is not cleared.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6c144f3d2e230f2b3ac5ed8c51e0f0391556197 ]
The queue count is increased in nvme_loop_init_io_queues(), so we
need to reset it to 1 at the end of nvme_loop_destroy_io_queues().
Otherwise the function is not re-entrant safe, and crash will happen
during concurrent reset and remove calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e57f5cd99ca60cddf40201b0f4ced9f1938e299c ]
Apparently some arrays are now returning "HPE" as the vendor.
Link: https://lore.kernel.org/r/20210601175214.25719-1-emilne@redhat.com
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79c932cd6af9829432888c4a0001d01793a09f12 ]
Do not drop reference count on vn_port->host in qedf_vport_create()
unconditionally. Instead drop the reference count in qedf_vport_destroy().
Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de
Reported-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f336d0b93ae978f12c5e27199f828da89b91e56a ]
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'status'.
Eliminate the follow smatch warning:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe()
warn: missing error code 'status'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 515da6f4295c2c42b8c54572cce3d2dd1167c41e ]
On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the
interrupts, a call to irqs_disabled() will return false thus firing a
warning in __transport_wait_for_tasks().
Remove the warning and also replace assert_spin_locked() with
lockdep_assert_held()
Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4b494099ad657f1cb85436d333cf38870ee95bc ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73a395c46704304b96bc5e2ee19be31124025c0c ]
It's theoretically possible for the runtime PM reference to leak if the
code fails anywhere between the pm_runtime_resume_and_get() and
pm_runtime_put() calls, so make sure to release the runtime PM reference
in that case.
Practically this will never happen because none of the functions will
fail on Tegra, but it's better for the code to be pedantic in case these
assumptions will ever become wrong.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
[treding@nvidia.com: add commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6be388f4a35d2ce5ef7dbf635a8964a5da7f799f ]
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().
Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48e33befe61a7d407753c53d1a06fc8d6b5dab80 ]
Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it
should not print <UNKNOWN>
Signed-off-by: Mark Bolhuis <mark@bolhuis.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc8b796f618c3ccb0a2a8ed1e96c00a1a7849415 ]
This re-adds the suffix to Win8 stylus-on-touchscreen devices,
now that they aren't erroneously marked as MT
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b2520076822f15621509a6da3bc4a8636cd33b4 ]
The Lenovo optical mouse with vendor id of 0x17ef and product id of
0x600e experiences disconnecting issues every 55 seconds:
[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse
[38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665
[38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0
[38619.360692] usb 1-1.4: USB disconnect, device number 48
[38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd
[38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00
[38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0
This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit edb032033da0dc850f6e7740fa1023c73195bc89 ]
In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b229b13d78d112e2c5d4a60a3c6f602289959fa ]
HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.
This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25bdbfbb2d8331a67824dd03d0087e9c98835f3a ]
The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream.
get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.
Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11714026c02d613c30a149c3f4c4a15047744529 upstream.
scsi_host_dev_release() only frees dev_name when host state is
SHOST_CREATED. After host state has changed to SHOST_RUNNING,
scsi_host_dev_release() no longer cleans up.
Fix this by doing a put_device(&shost->shost_dev) in the failure path when
host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before
device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put
on this reference.
Link: https://lore.kernel.org/r/20210602133029.2864069-4-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3719f4ff047e20062b8314c23ec3cab84d74c908 upstream.
When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.
Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.
Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream.
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ba0aa2feebda680ecfc3c552e867cf4d1b05a3a upstream.
The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.
However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.
[exception RIP: init_cq_frag_buf+103]
[ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib]
[ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core]
[ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt]
[ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt]
[ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt]
[ffff9f799ddcbec8] kthread at ffffffffa66c5da1
[ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd
Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that
takes the correct source buffer as a parameter.
Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 404e5a12691fe797486475fe28cc0b80cb8bef2c upstream.
Currently when mlx4 maps the hca_core_clock page to the user space there
are read-modifiable registers, one of which is semaphore, on this page as
well as the clock counter. If user reads the wrong offset, it can modify
the semaphore and hang the device.
Do not map the hca_core_clock page to the user space unless the device has
been put in a backwards compatibility mode to support this feature.
After this patch, mlx4 core_clock won't be mapped to user space on the
majority of existing devices and the uverbs device time feature in
ibv_query_rt_values_ex() will be disabled.
Fixes: 52033cfb5aab ("IB/mlx4: Add mmap call to map the hardware clock")
Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.1622726305.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3e74fb9247cd530dca246699d5eb5a691884d32 upstream.
After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib
interfaces"), if the IPoIB device is moved to non-initial netns,
destroying that netns lets the device vanish instead of moving it back to
the initial netns, This is happening because default_device_exit() skips
the interfaces due to having rtnl_link_ops set.
Steps to reporoduce:
ip netns add foo
ip link set mlx5_ib0 netns foo
ip netns delete foo
WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50
Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT
nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d
fuse
CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: netns cleanup_net
RIP: 0010:netdev_exit+0x3f/0x50
Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48
8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b
c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00
RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206
RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d
RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00
RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00
R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620
R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20
FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ops_exit_list.isra.9+0x36/0x70
cleanup_net+0x234/0x390
process_one_work+0x1cb/0x360
? process_one_work+0x360/0x360
worker_thread+0x30/0x370
? process_one_work+0x360/0x360
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
To avoid the above warning and later on the kernel panic that could happen
on shutdown due to a NULL pointer dereference, make sure to set the
netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev:
Move device back to init netns on owning netns delete") to properly
restore the IPoIB interfaces to the initial netns.
Fixes: 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces")
Link: https://lore.kernel.org/r/20210525150134.139342-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 142d0b24c1b17139f1aaaacae7542a38aa85640f upstream.
Fix the copy-paste mistake in the return path of typec_mux_match(),
where dev is considered a member of struct typec_switch rather than
struct typec_mux.
The two structs are identical in regards to having the struct device as
the first entry, so this provides no functional change.
Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610002132.3088083-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream.
The MAX77620 driver fails to re-probe on deferred probe because driver
core tries to claim resources that are already claimed by the PINCTRL
device. Use device_set_of_node_from_dev() helper which marks OF node as
reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC
device on the re-probe.
Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210523224243.13219-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream.
For the boot-on/always-on regulators the set_machine_constrainst() is
called before resolving rdev->supply. Thus the code would try to enable
rdev before enabling supplying regulator. Enforce resolving supply
regulator before enabling rdev.
Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210519221224.2868496-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 305f670846a31a261462577dd0b967c4fa796871 upstream.
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f7ec77cc8b64ff5037c1945e4650c65c458037d upstream.
The QFN20 part has a different GPIO/port function assignment. The
configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK
which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a
different GPIO to primary function assignment.
Special case QFN20 to follow to properly detect which GPIOs are
available.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.
Add PID for the NovaTech OrionMX so it can be automatically detected.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.
During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests. When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests. Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)
Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.
If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful. Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.
Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.
Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5ab95da2a41567440097c277c5771ad13928dad upstream.
As LKP noticed the Sparse is not happy about strict type handling:
.../typec/tcpm/wcove.c:380:50: sparse: expected unsigned short [usertype] header
.../typec/tcpm/wcove.c:380:50: sparse: got restricted __le16 const [usertype] header
Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.
Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together")
Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210609172202.83377-1-andriy.shevchenko@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b65ba0c362be665192381cc59e3ac3ef6f0dd1e1 upstream.
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.
This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:
$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms
Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.
Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:
$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms
Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64")
Cc: stable@vger.kernel.org
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d00889080ab60051627dab1d85831cd9db750e2a upstream.
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3370139745853f7826895293e8ac3aec1430508e upstream.
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.
The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.
[ 456.873025] ------------[ cut here ]------------
[ 456.878198] kernel BUG at mm/slub.c:3968!
[ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ snip ]
[ 457.271004] Backtrace:
[ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[ 457.309586] r4:ec46d9e0
[ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[ 457.332831] r4:c1606788
[ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[ 457.384744] r5:f086e000 r4:f086c000
[ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[ 457.406828] r4:e8369900
[ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[ 457.423356] ffa0: 00000000 00000000 00000000 00000000
[ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[ 457.457750] r4:e9975200
[ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---
Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b436acd1cf7fac0ba987abd22955d98025c80c2b upstream.
There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.
An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.
To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.
Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13817d466eb8713a1ffd254f537402f091d48444 upstream.
Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.
The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3: Slaves with a higher chipselect are
rejected by spi_add_device().
However the commit neglected that num_chipselect only limits the number
of *native* chipselects. If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].
As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves.
Fixes: 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()")
Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ]
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ]
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ec6f20b33eb4f62ab90bdcd620436c883ec3af6 ]
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device: Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup(). With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.
I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c
Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters. If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c
In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls. It therefore doesn't need the bool.
It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails. Before c7299fea6769, they caused a double-free
if ->setup() failed on spi_device addition. Since the commit, they're
fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c
(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)
Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Saravana Kannan <saravanak@google.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx
Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 27e7db56cf3dffd302bd7ddfacb1d405cf671a2a ]
When a spi device is unregistered and triggers a driver unbind, the
driver might need to access the spi device. So, don't have the
controller clean up the spi device before the driver is unbound. Clean
up the spi device after the driver is unbound.
Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210505164734.175546-1-saravanak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 042a3eaad6daeabcfaf163aa44da8ea3cf8b5496 ]
We need to select NVME_CORE.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Bindu Ramamurthy
Hannes Reinecke
Ewan D. Milne
Daniel Wagner
Jiapeng Chong
Maurizio Lombardi
Bixuan Cui
Pavel Machek (CIP)
Anirudh Rayabharam
Mark Bolhuis
Ahelenia Ziemiańska
Saeed Mirzamohammadi
Srinivas Pandruvada
Dmitry Torokhov
Nirenjan Krishnan
Ming Lei
Alaa Hleihel
Shay Drory
Kamal Heib
Bjorn Andersson
Dmitry Osipenko
Dmitry Baryshkov
Maciej Żenczykowski
Linyu Yuan
Stefan Agner
Johan Hovold
Alexandre GRIVEAUX
George McCollister
Wesley Cheng
Mayank Rana
Andy Shevchenko
Thomas Petazzoni
Marian-Cristian Rotariu
Wenli Looi
Desmond Cheong Zhi Xi
Lukas Wunner
Chris Packham
Saravana Kannan
Sagi Grimberg