| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 84c11e4df5aa4955acaa441f0cf1cb2e50daf64b ]
The driver sets a default domain id (FLPT_DEFAULT_DID) in the
first level only pasid entry, but saves a different domain id
in @sdev->did. The value saved in @sdev->did will be used to
invalidate the translation caches. Hence, the driver might
result in invalidating the caches with a wrong domain id.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bb71fc790a88d063507dc5d445ab8b14e845591 ]
The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: mark gross <mgross@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: f8bab73515ca5 ("intel-iommu: PMEN support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 909e9c9c428376e2a43d178ed4b0a2d5ba9cb7d3 ]
pm_runtime_get_sync returns negative on failure.
Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fca269f201a8d9985c0a31fb60b15d4eb57cef80 ]
mbigen_write_msg clears eventid bits of a mbigen register
when free a interrupt, because msi_domain_deactivate memset
struct msg to zero. Then multiple mbigen pins with zero eventid
will report the same interrupt number.
The eventid clear call trace:
free_irq
__free_irq
irq_shutdown
irq_domain_deactivate_irq
__irq_domain_deactivate_irq
__irq_domain_deactivate_irq
msi_domain_deactivate
platform_msi_write_msg
mbigen_write_msg
Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com>
[maz: massaged subject]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a77623d78b307b34d4cf7886da6a907689bf388 ]
The rising configuration status register (rtsr) is not banked.
As it is shared with the co-processor, it should not be written at probe
time, else the co-processor configuration will be lost.
Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0dda09666f50eae9c5b794dd89b1fd8a8d89d714 ]
Falling and rising configuration and status registers are not banked.
As they are shared with M4 co-processor, they should not be cleared
at probe time, else M4 co-processor configuration will be lost.
Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a3b45ada960ac475ec2b4103d43e57943b2b8d3 ]
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4
to update internal state (shadow registers).
Apparently the driver implements it incorrectly. The rule should be
as follows:
- do not request updating registers until previous request was finished,
ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0.
- before setting registers synchronisation on VSYNC should be turned off,
ie. MXR_STATUS_SYNC_ENABLE should be reset,
- after finishing MXR_STATUS_SYNC_ENABLE should be set again.
The patch hopefully implements it correctly.
Below sample kernel log from page fault caused by the bug:
[ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800
[ 25.677888] ------------[ cut here ]------------
[ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450!
[ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ 25.693778] Modules linked in:
[ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136
[ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264
[ 25.716470] LR is at lock_is_held_type+0x44/0x64
v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2071ac985d37efe496782c34318dbead93beb02f ]
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock
the deadlock scenario is like following:
First thread is probing cs2000
cs2000_probe()
clk_register()
__clk_core_init()
clk_prepare_lock() ----> acquires prepare_lock
cs2000_recalc_rate()
i2c_smbus_read_byte_data()
rcar_i2c_master_xfer()
dma_request_chan()
rcar_dmac_of_xlate()
rcar_dmac_alloc_chan_resources()
pm_runtime_get_sync()
__pm_runtime_resume()
rpm_resume()
rpm_callback()
genpd_runtime_resume() ----> acquires genpd->mlock
Second thread is attaching any device to the same PM domain
genpd_add_device()
genpd_lock() ----> acquires genpd->mlock
cpg_mssr_attach_dev()
of_clk_get_from_provider()
__of_clk_get_from_provider()
__clk_create_clk()
clk_prepare_lock() ----> acquires prepare_lock
Since currently no PM provider access genpd's critical section
in .attach_dev, and .detach_dev callbacks, so there is no need to protect
these two callbacks with genpd->mlock.
This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev
from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired
in .attach_dev and .detach_dev
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54e3aca84e571559915998aa6cc05e5ac37c043b ]
When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present
helper") introduced acpi_dev_present(), it missed the fact that
bus_find_device() took a reference on the device found by it and
the callers of acpi_dev_present() don't drop that reference.
Drop the reference on the device in acpi_dev_present().
Fixes: 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ac444b4f0ace05d7c4c99f6b1e5b0cae0852f025 ]
This patch fixes crash due to NULL pointer derefrence because CPU pointer
is not set and used by driver. Instead, driver is passes CPU as tag via
ha->isp_ops->{lun_reset|target_reset}
[ 30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged...
[ 69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46.
[ 69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
[ 70.000680] PGD 0 P4D 0
[ 70.003232] Oops: 0000 [#1] SMP PTI
[ 70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1
[ 70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019
[ 70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10
[ 70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48
8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c
[ 70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246
[ 70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000
[ 70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400
[ 70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa
[ 70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528
[ 70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000
[ 70.088083] FS: 00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000
[ 70.096188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0
[ 70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 70.123425] Call Trace:
[ 70.125896] __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx]
[ 70.131572] scsi_ioctl_reset+0x1f5/0x2a0
[ 70.135600] scsi_ioctl+0x18e/0x397
[ 70.139099] ? sd_ioctl+0x7c/0x100 [sd_mod]
[ 70.143287] blkdev_ioctl+0x32b/0x9f0
[ 70.146954] ? __check_object_size+0xa3/0x181
[ 70.151323] block_ioctl+0x39/0x40
[ 70.154735] do_vfs_ioctl+0xa4/0x630
[ 70.158322] ? syscall_trace_enter+0x1d3/0x2c0
[ 70.162769] ksys_ioctl+0x60/0x90
[ 70.166104] __x64_sys_ioctl+0x16/0x20
[ 70.169859] do_syscall_64+0x5b/0x1b0
[ 70.173532] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 70.178587] RIP: 0033:0x7f90a1b3445b
[ 70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48
[ 70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b
[ 70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003
[ 70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000
[ 70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84
[ 70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000
[ 70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli
nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_
vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo
ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd
rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm
[ 70.314805] usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_
intel
[ 70.327335] CR2: 0000000000000040
Fixes: 9cf2bab630765 ("block: kill request ->cpu member")
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db983f6eef57a9d78af79bc32389b7e60eb3c47d ]
cmd->rcu is initialized by scsi_initialize_rq(). For passthrough
requests, blk_get_request() calls scsi_initialize_rq(). For filesystem
requests, scsi_init_command() calls scsi_initialize_rq(). Make sure
that destroy_rcu_head() is called for passthrough requests.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 165aa2bfb42904b1bec4bf2fa257c8c603c14a06 ]
In some cases, the iscsi_remove_session() function is called while an
unbind_work operation is still running. This may cause a situation where
sysfs objects are removed in an incorrect order, triggering a kernel
warning.
[ 605.249442] ------------[ cut here ]------------
[ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0'
[ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80
[ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi
[ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1
[ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi]
[ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80
[ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55
[ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286
[ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818
[ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007
[ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838
[ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000
[ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000
[ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0
[ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 607.524236] Call Trace:
[ 607.530591] device_del+0x56/0x350
[ 607.624393] ? ata_tlink_match+0x30/0x30 [libata]
[ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0
[ 607.829911] scsi_target_reap_ref_release+0x39/0x50
[ 607.928572] scsi_remove_target+0x1a2/0x1d0
[ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi]
[ 608.117435] process_one_work+0x1a7/0x360
[ 608.132917] worker_thread+0x30/0x390
[ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0
[ 608.323989] kthread+0x112/0x130
[ 608.418318] ? kthread_bind+0x30/0x30
[ 608.513821] ret_from_fork+0x35/0x40
[ 608.613909] ---[ end trace 0b98c310c8a6138c ]---
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e925b5be5751f6a7286bbd9a4cbbc4ac90cc5fa6 ]
kthread name only allows 15 characters (TASK_COMMON_LEN is 16).
Thus rename the kthreads created by intel_powerclamp driver from
"kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid"
to avoid truncated kthead name for cpu 100 and later.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ]
int3400 only pushes the UUID into the firmware when the mode is flipped
to "enable". The current code only exposes the mode flag if the firmware
supports the PASSIVE_1 UUID, which not all machines do. Remove the
restriction.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16fc8eca1975358111dbd7ce65e4ce42d1a848fb ]
Add more supported DPTF policies than the driver currently exposes.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Nisha Aram <nisha.aram@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35122495a8c6683e863acf7b05a7036b2be64c7a ]
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer
dereference in bcm2835_thermal_debugfs. The driver makes use of the
implementation details of the thermal framework to retrieve a pointer
to its private data from a struct thermal_zone_device, and gets it
wrong - leading to the crash. Instead, store its private data as the
drvdata and retrieve the thermal_zone_device pointer from it.
Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b5236cc5d086dd3ddd01113ee9255421aab9fab ]
Merge commit 19785cf93b6c ("Merge branch 'linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce
severity of too early temperature read"). Restore the original code from
the mentioned commit to finally fix the warning message during boot:
thermal thermal_zone0: failed to read out thermal zone (-22)
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa36e3616532f82a920b5ebf4e059fbafae63d88 ]
This variable is declared as:
static struct powerclamp_worker_data * __percpu worker_data;
In other words, a percpu pointer to struct ...
But this variable not used like so but as a pointer to a percpu
struct powerclamp_worker_data.
So fix the declaration as:
static struct powerclamp_worker_data __percpu *worker_data;
This also quiets Sparse's warnings from __verify_pcpu_ptr(), like:
494:49: warning: incorrect type in initializer (different address spaces)
494:49: expected void const [noderef] <asn:3> *__vpp_verify
494:49: got struct powerclamp_worker_data *
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81b74ac68c28fddb3589ad5d4d5e587baf4bb781 ]
The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ce59025f1182125e75c8d121daf44056b65dd1f ]
The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ce58dd7d9da3ca0d7cb8c9568f1c6f4746da65a ]
Building with clang finds a mistaken __init tag:
WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host()
The function davinci_mmcsd_probe() references
the function __init init_mmcsd_host().
This is often because davinci_mmcsd_probe lacks a __init
annotation or the annotation of init_mmcsd_host is wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec4fe4bcc584b55e24e8d1768f5510a62c0fd619 ]
There is a panic reported that on a system with x722 ethernet, when doing
the operations like:
# ip link add br0 type bridge
# ip link set eno1 master br0
# systemctl restart systemd-networkd
The system will panic "BUG: unable to handle kernel null pointer
dereference at 0000000000000034", with call chain:
i40iw_inetaddr_event
notifier_call_chain
blocking_notifier_call_chain
notifier_call_chain
__inet_del_ifa
inet_rtm_deladdr
rtnetlink_rcv_msg
netlink_rcv_skb
rtnetlink_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
__sys_sendto
It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while
the in->ifa_list is NULL.
So add a check for the "in->ifa_list == NULL" case, and skip the ARP
operation accordingly.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 587443e7773e150ae29e643ee8f41a1eed226565 ]
Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.
Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f3b487685b2acf71b42bb30d68fd9271bec8695 ]
When Daniel removed struct_mutex he didn't fix this call to the unlocked
variant which is required since we no longer use struct mutex.
This fixes a bunch of:
WARNING: CPU: 4 PID: 1370 at drivers/gpu/drm/drm_gem.c:931 drm_gem_object_put+0x2b/0x30 [drm]
Modules linked in: udl xt_CHECKSUM ipt_MASQUERADE tun bridge stp llc nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t>
CPU: 4 PID: 1370 Comm: Xorg Not tainted 5.0.0+ #2
backtraces when you plug in a udl device.
Fixes: ae358dacd217 (drm/udl: Get rid of dev->struct_mutex usage)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41c8d0adf3c4df1867d98cee4a2c4531352a33ad ]
We have to free on ->remove() the allocated resources on ->probe().
Fixes: d47d88361fee ("auxdisplay: Add HD44780 Character LCD support")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 16065fcdd19ddb9e093192914ac863884f308766 upstream.
Bisected guest kernel changes crashing qemu. Landed at
"6c1cd97bda drm/virtio: fix resource id handling". Looked again, and
noticed we where not only leaking *some* ids, but *all* ids. The old
code never ever called virtio_gpu_resource_id_put().
So, commit 6c1cd97bda effectively makes the linux kernel starting
re-using IDs after releasing them, and apparently virglrenderer can't
deal with that. Oops.
This patch puts a temporary stopgap into place for the 5.0 release.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140409.15280-1-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ed319c6ac08e9a28fca7ac188181ac122f4de84 upstream.
dm-integrity will deadlock if overlapping I/O is issued to it, the bug
was introduced by commit 724376a04d1a ("dm integrity: implement fair
range locks"). Users rarely use overlapping I/O so this bug went
undetected until now.
Fix this bug by correcting, likely cut-n-paste, typos in
ranges_overlap() and also remove a flawed ranges_overlap() check in
remove_range_unlocked(). This condition could leave unprocessed bios
hanging on wait_list forever.
Cc: stable@vger.kernel.org # v4.19+
Fixes: 724376a04d1a ("dm integrity: implement fair range locks")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcb44433bba5eaff293888ef22ffa07f1f0347d6 upstream.
Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.
The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector 10487808
The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.
Fix this by training DM core to disable DISCARD if the underlying
storage already did so.
Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.
Cc: stable@vger.kernel.org
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb40c0acdc342b815d4d03ae6abb09e80c0f2988 upstream.
Some devices don't use blk_integrity but still want stable pages
because they do their own checksumming. Examples include rbd and iSCSI
when data digests are negotiated. Stacking DM (and thus LVM) on top of
these devices results in sporadic checksum errors.
Set BDI_CAP_STABLE_WRITES if any underlying device has it set.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PAGE_SIZE")
commit 75ae193626de3238ca5fb895868ec91c94e63b1b upstream.
The limit was already incorporated to dm-crypt with commit 4e870e948fba
("dm crypt: fix error with too large bios"), so we don't need to apply
it globally to all targets. The quantity BIO_MAX_PAGES * PAGE_SIZE is
wrong anyway because the variable ti->max_io_len it is supposed to be in
the units of 512-byte sectors not in bytes.
Reduction of the limit to 1048576 sectors could even cause data
corruption in rare cases - suppose that we have a dm-striped device with
stripe size 768MiB. The target will call dm_set_target_max_io_len with
the value 1572864. The buggy code would reduce it to 1048576. Now, the
dm-core will errorneously split the bios on 1048576-sector boundary
insetad of 1572864-sector boundary and pass these stripe-crossing bios
to the striped target.
Cc: stable@vger.kernel.org # v4.16+
Fixes: 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d74e6a3b6421d98eeafbed26f29156d469bc0b5 upstream.
If the string opt_string is small, the function memcmp can access bytes
that are beyond the terminating nul character. In theory, it could cause
segfault, if opt_string were located just below some unmapped memory.
Change from memcmp to strncmp so that we don't read bytes beyond the end
of the string.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3943af9d01e94330d0cfac6fccdbc829aad50c92 upstream.
During a safe hot remove, the OS powers off the slot, which may cause a
Data Link Layer State Changed event. The slot has already been set to
OFF_STATE, so that event results in re-enabling the device, making it
impossible to safely remove it.
Clear out the Presence Detect Changed and Data Link Layer State Changed
events when the disabled slot has settled down.
It is still possible to re-enable the device if it remains in the slot
after pressing the Attention Button by pressing it again.
Fixes the problem that Micah reported below: an NVMe drive power button may
not actually turn off the drive.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203237
Reported-by: Micah Parrish <micah.parrish@hpe.com>
Tested-by: Micah Parrish <micah.parrish@hpe.com>
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
[bhelgaas: changelog, add bugzilla URL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9cde402a59770a0669d895399c13407f63d7d209 upstream.
There is a Marvell 88SE9170 PCIe SATA controller I found on a board here.
Some quick testing with the ARM SMMU enabled reveals that it suffers from
the same requester ID mixup problems as the other Marvell chips listed
already.
Add the PCI vendor/device ID to the list of chips which need the
workaround.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1abe186ed8a6593069bc122da55fc684383fdc1c upstream.
If page-fault handler spans multiple MRs then the access mask needs to
be reset before each MR handling or otherwise write access will be
granted to mapped pages instead of read-only.
Cc: <stable@vger.kernel.org> # 3.19
Fixes: 7bdf65d411c1 ("IB/mlx5: Handle page faults")
Reported-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 21635d7311734d2d1b177f8a95e2f9386174b76d upstream.
Commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast
and narrow") started to optize the eDP 1.4+ link config, both per spec
and as preparation for display stream compression support.
Sadly, we again face panels that flat out fail with parameters they
claim to support. Revert, and go back to the drawing board.
v2: Actually revert to max params instead of just wide-and-slow.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959
Fixes: 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Tested-by: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Tested-by: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405075220.9815-1-jani.nikula@intel.com
(cherry picked from commit f11cb1c19ad0563b3c1ea5eb16a6bac0e401f428)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf94db21905333e610e479688add629397a4b384 upstream.
vring_create_virtqueue() allows the caller to specify via the
may_reduce_num parameter whether the vring code is allowed to
allocate a smaller ring than specified.
However, the split ring allocation code tries to allocate a
smaller ring on allocation failure regardless of what the
caller specified. This may cause trouble for e.g. virtio-pci
in legacy mode, which does not support ring resizing. (The
packed ring code does not resize in any case.)
Let's fix this by bailing out immediately in the split ring code
if the requested size cannot be allocated and may_reduce_num has
not been specified.
While at it, fix a typo in the usage instructions.
Fixes: 2a2d1382fe9d ("virtio: Add improved queue allocation API")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b39b013037fbfa8d4b999345d9e904d8a336fc2 upstream.
If we unplug a udl device, the usb callback with deinit the
mode_config struct, however userspace will still have an open
file descriptor and a framebuffer on that device. When userspace
closes the fd, we'll oops because it'll try and look stuff up
in the object idr which we've destroyed.
This punts destroying the mode objects until release time instead.
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-2-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd9063757a227cf31ebf5391ccda2bf583b0806e upstream.
Currently resolutions with pixel clock higher than 340 MHz don't work
with H6 HDMI controller. They just produce a blank screen.
Limit maximum pixel clock rate to 340 MHz until scrambling is supported.
Cc: stable@vger.kernel.org # 5.0
Fixes: 40bb9d3147b2 ("drm/sun4i: Add support for H6 DW HDMI controller")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190324190609.32721-1-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dade58ed5af6365ac50ff4259c2a0bf31219e285 upstream.
in workload creation routine, if any failure occurs, do not queue this
workload for delivery. if this failure is fatal, enter into failsafe
mode.
Fixes: 6d76303553ba ("drm/i915/gvt: Move common vGPU workload creation into scheduler.c")
Cc: stable@vger.kernel.org #4.19+
Cc: zhenyuw@linux.intel.com
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c41ea6d52003b5bc77c2a82fd5ca7d480237d89 upstream.
commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback") skips data resets during tuning operation. Because of this,
a data error or data finish interrupt might still arrive after a command
error has been handled and the mrq ended. This ends up with a "mmc0: Got
data interrupt 0x00000002 even though no data operation was in progress"
error message.
Fix this by adding a platform specific callback for sdhci_irq. Mark the
mrq as a failure but wait for a data interrupt instead of calling
finish_mrq().
Fixes: 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback")
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 157c99c5a2956a9ab1ae12de0136a2d8a1b1a307 upstream.
The alcor driver is setting up data transfer and submitting the associated
MMC command at the same time. While this works most of the time, it
occasionally causes problems upon write.
In the working case, after setting up the data transfer and submitting
the MMC command, an interrupt comes in a moment later with CMD_END and
WRITE_BUF_RDY bits set. The data transfer then happens without problem.
However, on occasion, the interrupt that arrives at that point only
has WRITE_BUF_RDY set. The hardware notifies that it's ready to write
data, but the associated MMC command is still running. Regardless, the
driver was proceeding to write data immediately, and that would then cause
another interrupt indicating data CRC error, and the write would fail.
Additionally, the transfer setup function alcor_trigger_data_transfer()
was being called 3 times for each write operation, which was confusing
and may be contributing to this issue.
Solve this by tweaking the driver behaviour to follow the sequence observed
in the original ampe_stor vendor driver:
1. When starting request handling, write 0 to DATA_XFER_CTRL
2. Submit the command
3. Wait for CMD_END interrupt and then trigger data transfer
4. For the PIO case, trigger the next step of the data transfer only
upon the following DATA_END interrupt, which occurs after the block has
been written.
I confirmed that the read path still works (DMA & PIO) and also now
presents more consistency with the operations performed by ampe_stor.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5781ffbbd4f742a58263458145fe7f0ac01d9e0 upstream.
ACPICA commit b233720031a480abd438f2e9c643080929d144c3
ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.
During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.
Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.
A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.
Link: https://github.com/acpica/acpica/commit/b2337200
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475
Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization")
Reported-by: Michael J Gruber <mjg@fedoraproject.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8b1917c8987a6fa3695d479b4d60fbbbc3e537b upstream.
Commit 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing
ACPI IRQs during suspend/resume") was added to stop clearing event
status bits unconditionally in the system-wide suspend and resume
paths. This was done because of an issue with a laptop lid appaering
to be closed even when it was used to wake up the system from suspend
(see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which
happened because event status bits were cleared unconditionally on
system resume. Though this change fixed the issue in the resume path,
it introduced regressions in a few suspend paths.
First regression was reported and fixed in the S5 entry path by commit
fa85015c0d95 ("ACPICA: Clear status of all events when entering S5").
Next regression was reported and fixed for all legacy sleep paths by
commit f317c7dc12b7 ("ACPICA: Clear status of all events when entering
sleep states"). However, there still is a suspend-to-idle regression,
since suspend-to-idle does not follow the legacy sleep paths.
In the suspend-to-idle case, wakeup is enabled as part of device
suspend. If the status bits of wakeup GPEs are set when they are
enabled, it causes a premature system wakeup to occur.
To address that problem, partially revert commit 18996f2db918 to
restore GPE status bits clearing before the GPE is enabled in
acpi_ev_enable_gpe().
Fixes: 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Signed-off-by: Furquan Shaikh <furquan@google.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd35759ce32b60d3eb52436894bab996dbf8cffa upstream.
hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it
gets interpreted as a negative scroll direction event. This can cause scroll
direction resets and thus broken scrolling.
Fixes: 4435ff2f09a2fc ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org # v5.0
Reported-and-tested-by: Aimo Metsälä <aimetsal@outlook.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8e6af454117a51dbf6c8a47c00180a0c235052fe upstream.
In the case of power sensor version 0xA0, the sensor indexing overlapped
with the "caps" power sensors, resulting in probe failure and kernel
warnings. Fix this by specifying the next index for each power sensor
version.
Fixes: 54076cb3b5ff ("hwmon (occ): Add sensor attributes and register ...")
Cc: stable@vger.kernel.org
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a165dcc923ada2ffdee1d4f41f12f81b66d04c55 upstream.
Select REGMAP_I2C to avoid below build error:
ERROR: "__devm_regmap_init_i2c" [drivers/hwmon/w83773g.ko] undefined!
Fixes: ee249f271524 ("hwmon: Add W83773G driver")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c0cca7c847e6e019d67b7d793efbbe3b947d004 upstream.
By default, the kernel will automatically load the module of any line
dicipline that is asked for. As this sometimes isn't the safest thing
to do, provide a sysctl to disable this feature.
By default, we set this to 'y' as that is the historical way that Linux
has worked, and we do not want to break working systems. But in the
future, perhaps this can default to 'n' to prevent this functionality.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c7084edc3f6d67750f50d4183134c4fb5712a5c8 upstream.
The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.
After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.
Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 9b0f430450cf230e736bc40f95bf34fbdb99cead.
This patch was not initially a fix and is dependent on other
changes which are not fixes eithers.
With this change, multiple Amlogic based boards fails to boot,
as reported by kernelci.
Cc: stable@vger.kernel.org # 5.0.7
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e28408e98bced123038857b6e3c81fa12a2e3e68 ]
Set xon = xoff - netdev's max_mtu.
netdev's max_mtu will give enough time for the pause frame to
arrive at the sender.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Lu Baolu
YueHaibing
Jianguo Chen
Fabien Dessenne
Andrzej Hajda
Jiada Wang
Andy Shevchenko
Himanshu Madhani
Bart Van Assche
Maurizio Lombardi
Zhang Rui
Matthew Garrett
Phil Elwell
Marek Szyprowski
Luc Van Oostenryck
Jens Axboe
Arnd Bergmann
Feng Tang
Jack Morgenstein
Dave Airlie
Gerd Hoffmann
Mikulas Patocka
Mike Snitzer
Ilya Dryomov
Sergey Miroshnichenko
Andre Przywara
Moni Shoua
Jani Nikula
Cornelia Huck
Jernej Skrabec
Yan Zhao
Faiz Abbas
Daniel Drake
Erik Schmauss
Furquan Shaikh
Peter Hutterer
Eddie James
Axel Lin
Greg Kroah-Hartman
Neil Armstrong
Huy Nguyen