| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Wolfram writes:
"i2c fix for 4.19:
I2C has one documentation bugfix for something we changed during the
v4.19 cycle"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Fix kerneldoc for renamed i2c dma put function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Will writes:
"More arm64 fixes
- Reject CHAIN PMU events when they are not part of a 64-bit counter
- Fix WARN_ON_ONCE() that triggers for reserved regions that don't
correspond to mapped memory"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: Reject stand-alone CHAIN events for PMUv3
arm64: Fix /proc/iomem for reserved but not memory regions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Arnd writes:
"ARM: SoC fixes for 4.19
Two last minute bugfixes, both for NXP platforms:
* The Layerscape 'qbman' infrastructure suffers from probe ordering
bugs in some configurations, a two-patch series adds a hotfix for
this. 4.20 will have a longer set of patches to rework it.
* The old imx53-qsb board regressed in 4.19 after the addition
of cpufreq support, adding a set of explicit operating points
fixes this."
* tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: fsl: qman_portals: defer probe after qman's probe
soc: fsl: qbman: add APIs to retrieve the probing status
ARM: dts: imx53-qsb: disable 1.2GHz OPP
|
|
The file is GPL v2 or later.
Acked-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It doesn't make sense for a perf event to be configured as a CHAIN event
in isolation, so extend the arm_pmu structure with a ->filter_match()
function to allow the backend PMU implementation to reject CHAIN events
early.
Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Ulf writes:
"MMC core:
- Avoid fragile multiblock reads for the last sector in SPI mode
WIFI/SDIO:
- libertas: Fixup suspend sequence for the SDIO card"
* tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
libertas: call into generic suspend code before turning off power
mmc: block: avoid multiblock reads for the last sector in SPI mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Linus writes:
"GPIO fix for the v4.19 series:
- Fix up the interrupt parent for the irqdomains."
* tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Assign gpio_irq_chip::parents to non-stack pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Linus writes:
"pin control fix for v4.19:
A single pin control fix for v4.19:
- Interrupt setup in the MCP23S08 driver."
* tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: fix irq and irqchip setup order
|
|
Dave writes:
"drm fixes for 4.19-rc8
single nouveau runtime reference and mst change"
* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
|
|
Doug writes:
"RDMA fixes:
Final for-rc pull request for 4.19
We only have one bug to submit this time around. It fixes a DMA
unmap issue where we unmapped the DMA address from the IOMMU before
we did from the card, resulting in a DMAR error with IOMMU enabled,
or possible crash without."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Unmap DMA addr from HCA before IOMMU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Dmitry writes:
"Input updates for v4.19-rc7
- we added a few scheduling points into various input interfaces to
ensure that large writes will not cause RCU stalls
- fixed configuring PS/2 keyboards as wakeup devices on newer
platforms
- added a new Xbox gamepad ID."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - add a schedule point in uinput_inject_events()
Input: evdev - add a schedule point in evdev_write()
Input: mousedev - add a schedule point in mousedev_write()
Input: i8042 - enable keyboard wakeups by default when s2idle is used
Input: xpad - add support for Xbox1 PDP Camo series gamepad
|
|
David writes:
"Networking
1) RXRPC receive path fixes from David Howells.
2) Re-export __skb_recv_udp(), from Jiri Kosina.
3) Fix refcounting in u32 classificer, from Al Viro.
4) Userspace netlink ABI fixes from Eugene Syromiatnikov.
5) Don't double iounmap on rmmod in ena driver, from Arthur
Kiyanovski.
6) Fix devlink string attribute handling, we must pull a copy into a
kernel buffer if the lifetime extends past the netlink request.
From Moshe Shemesh.
7) Fix hangs in RDS, from Ka-Cheong Poon.
8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.
9) Clear RX irq correctly in socionext, from Ilias Apalodimas.
10) bcm_sf2 fixes from Florian Fainelli."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
net: dsa: bcm_sf2: Call setup during switch resume
net: dsa: bcm_sf2: Fix unbind ordering
net: phy: sfp: remove sfp_mutex's definition
r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
net: socionext: clear rx irq correctly
net/mlx4_core: Fix warnings during boot on driverinit param set failures
tipc: eliminate possible recursive locking detected by LOCKDEP
selftests: udpgso_bench.sh explicitly requires bash
selftests: rtnetlink.sh explicitly requires bash.
qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
tipc: queue socket protocol error messages into socket receive buffer
tipc: set link tolerance correctly in broadcast link
net: ipv4: don't let PMTU updates increase route MTU
net: ipv4: update fnhe_pmtu when first hop's MTU changes
net/ipv6: stop leaking percpu memory in fib6 info
rds: RDS (tcp) hangs on sendto() to unresponding address
net: make skb_partial_csum_set() more robust against overflows
devlink: Add helper function for safely copy string param
devlink: Fix param cmode driverinit for string type
devlink: Fix param set handling for string type
...
|
|
There is no reason to open code what the switch setup function does, in
fact, because we just issued a switch reset, we would make all the
register get their default values, including for instance, having unused
port be enabled again and wasting power and leading to an inappropriate
switch core clock being selected.
Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.
Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.
Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function was renamed in commit 82fe39a6bc7b ("i2c: refactor
function to release a DMA safe buffer") but this kernel doc wasn't
updated to point at the new function. Rename it.
Fixes: 82fe39a6bc7b ("i2c: refactor function to release a DMA safe buffer")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The sfp_mutex variable is defined but never used in this file. Not even
in the commit that introduced that variable.
Remove sfp_mutex, it has no purpose.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It has been reported that since
commit 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from
suspend.
The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig
register.
We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F
chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36
and RTL_GIGA_MAC_VER_38.
Curiously, the NIC seems to work fine after a system boot without having
this bit set as long as the system isn't suspended and resumed.
Fixes: 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx")
removed constant mmio reads from the driver and started using a descriptor
field to check if packet should be processed.
This lead the napi rx handler being constantly called while no packets
needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read
to clear the irq correcty after processing packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During boot, mlx4_core sets the driverinit configuration parameters and
updates the devlink module on the initial values calling
devlink_param_driverinit_value_set().
If devlink_param_driverinit_value_set() returns an error mlx4_core
reports kernel module warning.
This caused false alarm during boot in case kernel was compiled with
CONFIG_NET_DEVLINK off.
Fix by removing warning reported in case
devlink_param_driverinit_value_set() fails.
This actually makes the function mlx4_devlink_set_init_value()
redundant to using directly devlink_param_driverinit_value_set() and so
removed.
It fixes the following kernel trace:
mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95)
Fixes: bd1b51dc66df ("mlx4: Add mlx4 initial parameters table and register it")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Kees writes:
"Fix open-coded multiplication arguments to allocators
- Fixes several new open-coded multiplications added in the 4.19
merge window."
* tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Replace more open-coded allocation size multiplications
|
|
Added support for Gemalto's Cinterion ALASxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Mike writes:
"device mapper fix for 4.19 final
- Fix for earlier 4.19 final DM linear change that incorrectly
checked for CONFIG_DM_ZONED rather than CONFIG_BLK_DEV_ZONED."
* tag 'for-4.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm linear: fix linear_end_io conditional definition
|
|
The dm-linear target is independent of the dm-zoned target. For code
requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED
instead of CONFIG_DM_ZONED.
While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM
feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined.
Fixes: beb9caac211c1 ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled")
Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Mike writes:
"device mapper fixes for 4.19 final
- Fix a DM cache module init error path bug that doesn't properly
cleanup a KMEM_CACHE if target registration fails.
- Two stable@ fixes for DM zoned target; 4.20 will have changes that
eliminate this code entirely but <= 4.19 needs these changes."
* tag 'for-4.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled
dm: fix report zone remapping to account for partition offset
dm cache: destroy migration_cache if cache target registration failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Rob writes:
"Devicetree fixes for 4.19, part 3:
- Fix DT unittest on Oldworld MAC systems"
* tag 'devicetree-fixes-for-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: unittest: Disable interrupt node tests for old world MAC systems
|
|
The function that puts back the MR in cache also removes the DMA address
from the HCA. Therefore we need to call this function before we remove
the DMA mapping from MMU. Otherwise the HCA may access a memory that
is no longer DMA mapped.
Call trace:
NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc6+ #4
Hardware name: HP ProLiant DL360p Gen8, BIOS P71 08/20/2012
RIP: 0010:intel_idle+0x73/0x120
Code: 80 5c 01 00 0f ae 38 0f ae f0 31 d2 65 48 8b 04 25 80 5c 01 00 48 89 d1 0f 60 02
RSP: 0018:ffffffff9a403e38 EFLAGS: 00000046
RAX: 0000000000000030 RBX: 0000000000000005 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff9a5790c0 RDI: 0000000000000000
RBP: 0000000000000030 R08: 0000000000000000 R09: 0000000000007cf9
R10: 000000000000030a R11: 0000000000000018 R12: 0000000000000000
R13: ffffffff9a5792b8 R14: ffffffff9a5790c0 R15: 0000002b48471e4d
FS: 0000000000000000(0000) GS:ffff9c6caf400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5737185000 CR3: 0000000590c0a002 CR4: 00000000000606f0
Call Trace:
cpuidle_enter_state+0x7e/0x2e0
do_idle+0x1ed/0x290
cpu_startup_entry+0x6f/0x80
start_kernel+0x524/0x544
? set_init_arg+0x55/0x55
secondary_startup_64+0xa4/0xb0
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read] Request device [04:00.0] fault addr b34d2000 [fault reason 06] PTE Read access is not set
DMAR: [DMA Read] Request device [01:00.2] fault addr bff8b000 [fault reason 06] PTE Read access is not set
Fixes: f3f134f5260a ("RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory")
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
It is best to avoid any extra overhead associated with bio completion.
DM core will indirectly call a DM target's .end_io if it is defined.
In the case of DM linear, there is no need to do so (for every bio that
completes) if CONFIG_DM_ZONED is not enabled.
Avoiding an extra indirect call for every bio completion is very
important for ensuring DM linear doesn't incur more overhead that
further widens the performance gap between dm-linear and raw block
devices.
Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Since 'commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' the
irq request isn't the last devm_* allocation. Without a deeper look at
the irq and testing this isn't a good solution. Since this driver relies
on the devm mechanism, requesting a interrupt should be the last thing
to avoid memory corruptions during unbinding.
'Commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' fixed the
order for the interrupt-controller use case only. The
mcp23s08_irq_setup() must be split into two to fix it for the
interrupt-controller use case and to register the irq at last. So the
irq will be freed first during unbind.
Cc: stable@vger.kernel.org
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Dmitry Mastykin <mastichi@gmail.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Fixes: 82039d244f87 ("pinctrl: mcp23s08: add pinconf support")
Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gpiochip_set_cascaded_irqchip() is passed 'parent_irq' as an argument
and then the address of that argument is assigned to the gpio chips
gpio_irq_chip 'parents' pointer shortly thereafter. This can't ever
work, because we've just assigned some stack address to a pointer that
we plan to dereference later in gpiochip_irq_map(). I ran into this
issue with the KASAN report below when gpiochip_irq_map() tried to setup
the parent irq with a total junk pointer for the 'parents' array.
BUG: KASAN: stack-out-of-bounds in gpiochip_irq_map+0x228/0x248
Read of size 4 at addr ffffffc0dde472e0 by task swapper/0/1
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 4.14.72 #34
Call trace:
[<ffffff9008093638>] dump_backtrace+0x0/0x718
[<ffffff9008093da4>] show_stack+0x20/0x2c
[<ffffff90096b9224>] __dump_stack+0x20/0x28
[<ffffff90096b91c8>] dump_stack+0x80/0xbc
[<ffffff900845a350>] print_address_description+0x70/0x238
[<ffffff900845a8e4>] kasan_report+0x1cc/0x260
[<ffffff900845aa14>] __asan_report_load4_noabort+0x2c/0x38
[<ffffff900897e098>] gpiochip_irq_map+0x228/0x248
[<ffffff900820cc08>] irq_domain_associate+0x114/0x2ec
[<ffffff900820d13c>] irq_create_mapping+0x120/0x234
[<ffffff900820da78>] irq_create_fwspec_mapping+0x4c8/0x88c
[<ffffff900820e2d8>] irq_create_of_mapping+0x180/0x210
[<ffffff900917114c>] of_irq_get+0x138/0x198
[<ffffff9008dc70ac>] spi_drv_probe+0x94/0x178
[<ffffff9008ca5168>] driver_probe_device+0x51c/0x824
[<ffffff9008ca6538>] __device_attach_driver+0x148/0x20c
[<ffffff9008ca14cc>] bus_for_each_drv+0x120/0x188
[<ffffff9008ca570c>] __device_attach+0x19c/0x2dc
[<ffffff9008ca586c>] device_initial_probe+0x20/0x2c
[<ffffff9008ca18bc>] bus_probe_device+0x80/0x154
[<ffffff9008c9b9b4>] device_add+0x9b8/0xbdc
[<ffffff9008dc7640>] spi_add_device+0x1b8/0x380
[<ffffff9008dcbaf0>] spi_register_controller+0x111c/0x1378
[<ffffff9008dd6b10>] spi_geni_probe+0x4dc/0x6f8
[<ffffff9008cab058>] platform_drv_probe+0xdc/0x130
[<ffffff9008ca5168>] driver_probe_device+0x51c/0x824
[<ffffff9008ca59cc>] __driver_attach+0x100/0x194
[<ffffff9008ca0ea8>] bus_for_each_dev+0x104/0x16c
[<ffffff9008ca58c0>] driver_attach+0x48/0x54
[<ffffff9008ca1edc>] bus_add_driver+0x274/0x498
[<ffffff9008ca8448>] driver_register+0x1ac/0x230
[<ffffff9008caaf6c>] __platform_driver_register+0xcc/0xdc
[<ffffff9009c4b33c>] spi_geni_driver_init+0x1c/0x24
[<ffffff9008084cb8>] do_one_initcall+0x240/0x3dc
[<ffffff9009c017d0>] kernel_init_freeable+0x378/0x468
[<ffffff90096e8240>] kernel_init+0x14/0x110
[<ffffff9008086fcc>] ret_from_fork+0x10/0x18
The buggy address belongs to the page:
page:ffffffbf037791c0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffffbf037791e0 ffffffbf037791e0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffc0dde47180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0dde47200: f1 f1 f1 f1 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f2 f2
>ffffffc0dde47280: f2 f2 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3
^
ffffffc0dde47300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0dde47380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Let's leave around one unsigned int in the gpio_irq_chip struct for the
single parent irq case and repoint the 'parents' array at it. This way
code is left mostly intact to setup parents and we waste an extra few
bytes per structure of which there should be only a handful in a system.
Cc: Evan Green <evgreen@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: e0d897289813 ("gpio: Implement tighter IRQ chip integration")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When powering down a SDIO connected card during suspend, make sure to call
into the generic lbs_suspend() function before pulling the plug. This will
make sure the card is successfully deregistered from the system to avoid
communication to the card starving out.
Fixes: 7444a8092906 ("libertas: fix suspend and resume for SDIO connected cards")
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the
devicetree interrupt parsing code is different, causing unit tests of
devicetree interrupt nodes to fail. Due to a bug in unittest code, which
tries to dereference an uninitialized pointer, this results in a crash.
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc08e9468
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1
task: cf8e0000 task.stack: cf8da000
NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac
REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+)
MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000
DAR: 00bc616e DSISR: 40000000
GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002
GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000
GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8
GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517
NIP [c08e9468] device_node_gen_full_name+0x30/0x15c
LR [c08ea5bc] device_node_string+0x190/0x3c8
Call Trace:
[cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable)
[cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8
[cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0
[cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec
[cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48
[cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c
[cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130
[cf8dbdd0] [c008ff54] printk+0x5c/0x6c
[cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8
[cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184
[cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8
[cf8dbf30] [c0004814] kernel_init+0x24/0x118
[cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64
The problem was observed when running a qemu test for the g3beige machine
with devicetree unittests enabled.
Disable interrupt node tests on affected systems to avoid both false
unittest failures and the crash.
With this patch in place, unittest on the affected system passes with
the following message.
dt-test ### end of unittest - 144 passed, 0 failed
Fixes: 53a42093d96ef ("of: Add device tree selftests")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Benson writes:
"chrome-platform fix for v4.19-rc8
This contains a fix to 57e94c8b974d ("mfd: cros-ec: Increase maximum
mkbp event size"), which caused cros_ec based chromebooks to truncate
an entire column of their built-in keyboard."
* tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
mfd: cros-ec: copy the whole event in get_next_event_xfer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Martin writes:
"s390 fixes for 4.19-rc8
Four more patches for 4.19:
- Fix resume after suspend-to-disk if resume-CPU != suspend-CPU
- Fix vfio-ccw check for pinned pages
- Two patches to avoid a usercopy-whitelist warning in vfio-ccw"
* tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix how vfio-ccw checks pinned pages
s390/cio: Refactor alloc of ccw_io_region
s390/cio: Convert ccw_io_region to pointer
s390/hibernate: fix error handling when suspend cpu != resume cpu
|
|
Commit 57e94c8b974db2d83c60e1139c89a70806abbea0 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.
The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.
Fixes: 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size")
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
If dm-linear or dm-flakey are layered on top of a partition of a zoned
block device, remapping of the start sector and write pointer position
of the zones reported by a report zones BIO must be modified to account
for the target table entry mapping (start offset within the device and
entry mapping with the dm device). If the target's backing device is a
partition of a whole disk, the start sector on the physical device of
the partition must also be accounted for when modifying the zone
information. However, dm_remap_zone_report() was not considering this
last case, resulting in incorrect zone information remapping with
targets using disk partitions.
Fix this by calculating the target backing device start sector using
the position of the completed report zones BIO and the unchanged
position and size of the original report zone BIO. With this value
calculated, the start sector and write pointer position of the target
zones can be correctly remapped.
Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Commit 7e6358d244e47 ("dm: fix various targets to dm_register_target
after module __init resources created") inadvertently introduced this
bug when it moved dm_register_target() after the call to KMEM_CACHE().
Fixes: 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created")
Cc: stable@vger.kernel.org
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Eliminate potential auto casting compilation error.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
napi poll functions should be initialized before running request_irq(),
to handle a rare condition where there is a pending interrupt, causing
the ISR to fire immediately while the poll function wasn't set yet,
causing a NULL dereference.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a rare scenario when ena_device_restore() fails, followed by device
remove, an FLR will not be issued. In this case, the device will keep
sending asynchronous AENQ keep-alive events, even after driver removal,
leading to memory corruption.
Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Memory mapped with devm_ioremap is automatically freed when the driver
is disconnected from the device. Therefore there is no need to
explicitly call devm_iounmap.
Fixes: 0857d92f71b6 ("net: ena: add missing unmap bars on device removal")
Fixes: 411838e7b41c ("net: ena: fix rare kernel crash when bar memory remap fails")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some SD cards over SPI, reading with the multiblock read command the last
sector will leave the card in a bad state.
Remove last sectors from the multiblock reading cmd.
Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
David writes:
"Sparc fixes:
1) Minor fallthru comment tweaks from Gustavo A. R. Silva.
2) VLA removal from Kees Cook.
3) Make sparc vdso Makefile match x86, from Masahiro Yamada.
4) Fix clock divider programming in mach64 driver, from Mikulas
Patocka."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: fix fall-through annotation
sparc32: fix fall-through annotation
sparc: vdso: clean-up vdso Makefile
oradax: remove redundant null check before kfree
sparc64: viohs: Remove VLA usage
sbus: Use of_get_child_by_name helper
sparc: Convert to using %pOFn instead of device_node.name
mach64: detect the dot clock divider correctly on sparc
|
|
runtime refcount fix for mst connectors.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA=nydWjs26=TZHqistLXjCwm-vHmrisbP6K=FMZ5gW1wnQ@mail.gmail.com
|
|
A null check before a kfree is redundant, so remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the of_get_child_by_name() helper instead of open coding searching
for the '/options' node. This removes directly accessing the name
pointer as well.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On Sun Ultra 5, it happens that the dot clock is not set up properly for
some videomodes. For example, if we set the videomode "r1024x768x60" in
the firmware, Linux would incorrectly set a videomode with refresh rate
180Hz when booting (suprisingly, my LCD monitor can display it, although
display quality is very low).
The reason is this: Older mach64 cards set the divider in the register
VCLK_POST_DIV. The register has four 2-bit fields (the field that is
actually used is specified in the lowest two bits of the register
CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards,
there's another bit added - the top four bits of PLL_EXT_CNTL extend the
divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12".
The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets
them, so it can work regardless if the card supports them. However, the
sparc64 firmware may set these extended dividers during boot - and the
mach64 driver detects incorrect dot clock in this case.
This patch makes the driver read the additional divider bit from
PLL_EXT_CNTL and calculate the initial refresh rate properly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
I wrote:
"Char/Misc fixes for 4.19-rc7
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues."
* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Initialize after IOMMUs
thunderbolt: Do not handle ICM events after domain is stopped
firmware: Always initialize the fw_priv list object
docs: fpga: document fpga manager flags
fpga: bridge: fix obvious function documentation error
tools: hv: fcopy: set 'error' in case an unknown operation was requested
fpga: do not access region struct after fpga_region_unregister
Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
I wrote:
"Serial driver fixes for 4.19-rc7
Here are 3 small serial driver fixes for 4.19-rc7
- 2 sh-sci bugfixes for reported issues
- a revert of the PM handling for the 8250_dw code
All of these have been in linux-next with no reported issues."
* tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: sh-sci: Allow for compressed SCIF address"
Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
Revert "serial: 8250_dw: Fix runtime PM handling"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
I wrote:
"USB fixes for 4.19-rc7
Here are some small USB fixes for 4.19-rc7
These include:
- the usual xhci bugfixes for reported issues
- some new serial driver device ids
- bugfix for the option serial driver for some devices
- bugfix for the cdc_acm driver that has been there for a long time.
All of these have been in linux-next for a while with no reported
issues."
* tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci-mtk: resume USB3 roothub first
xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
usb: cdc_acm: Do not leak URB buffers
USB: serial: simple: add Motorola Tetra MTP6550 id
USB: serial: option: add two-endpoints device-id flag
USB: serial: option: improve Quectel EP06 detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Wolfram writes:
"i2c for 4.19
I2C has three driver bugfixes and a fix for a typo for you."
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
i2c: i2c-scmi: fix for i2c_smbus_write_block_data
i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
i2c: i2c-qcom-geni: Properly handle DMA safe buffers
|
Greg Kroah-Hartman
Peter Rosin
Will Deacon
Florian Fainelli
Stephen Boyd
Sebastian Andrzej Siewior
Maciej S. Szmigiero
Ilias Apalodimas
Moshe Shemesh
Giacinto Cifelli
Damien Le Moal
Valentine Fatiev
Mike Snitzer
Marco Felsch
Daniel Mack
Guenter Roeck
Emil Karlson
Shenghui Wang
Arthur Kiyanovski
Chris Boot
Dave Airlie
Colin Ian King
Rob Herring
Mikulas Patocka