summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2020-06-25watchdog: da9062: No need to ping manually before setting timeoutStefan Riedmueller
[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ] There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29watchdog: reset last_hw_keepalive time at startTero Kristo
[ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ] Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23watchdog: sp805: fix restart handlerMichael Walle
commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11watchdog: da9062: do not ping the hw during stop()Marco Felsch
[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ] The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05ACPI: watchdog: Fix gas->access_width usageMika Westerberg
commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream. ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11watchdog: fix UAF in reboot notifier handling in watchdog core codeVladis Dronov
commit 69503e585192fdd84b240f18a0873d20e18a2e0a upstream. After the commit 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade
[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ] Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01watchdog: max77620_wdt: fix potential build errorsDavid Engraf
[ Upstream commit da9e3f4e30a53cd420cf1e6961c3b4110f0f21f0 ] max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27watchdog: rtd119x_wdt: Fix remove functionGuenter Roeck
[ Upstream commit 8dd29f19512cc75ee470d7bb8ec86af199de23a8 ] The driver registers the watchdog with devm_watchdog_register_device() but still calls watchdog_unregister_device() on remove. Since clocks have to be stopped when removing the driver, after the watchdog device has been unregistered, we can not drop the call to watchdog_unregister_device(). Use watchdog_register_device() to register the watchdog. Fixes: 2bdf6acbfead7 ("watchdog: Add Realtek RTD1295") Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27watchdog: sprd: Fix the incorrect pointer getting from driver dataShuiqing Li
commit 39e68d9e7ab276880980ee5386301fb218202192 upstream. The device driver data saved the 'struct sprd_wdt' object, it is incorrect to get 'struct watchdog_device' object from the driver data, thus fix it. Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Reported-by: Dongwei Wang <dongwei.wang@unisoc.com> Signed-off-by: Shuiqing Li <shuiqing.li@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.1573210405.git.baolin.wang@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04watchdog: Fix the race between the release of watchdog_core_data and cdevKevin Hao
[ Upstream commit 72139dfa2464e43957d330266994740bb7be2535 ] The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-13watchdog: aspeed: Fix clock behaviour for ast2600Joel Stanley
[ Upstream commit c04571251b3d842096f1597f5d4badb508be016d ] The ast2600 no longer uses bit 4 in the control register to indicate a 1MHz clock (It now controls whether this watchdog is reset by a SOC reset). This means we do not want to set it. It also does not need to be set for the ast2500, as it is read-only on that SoC. The comment next to the clock rate selection wandered away from where it was set, so put it back next to the register setting it's describing. Fixes: b3528b487448 ("watchdog: aspeed: Add support for AST2600") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05watchdog: sama5d4: fix WDD value to be always set to maxEugen Hristev
commit 8632944841d41a36d77dd1fa88d4201b5291100f upstream. WDD value must be always set to max (0xFFF) otherwise the hardware block will reset the board on the first ping of the watchdog. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05watchdog: meson: Fix the wrong value of left timeXingyu Chen
[ Upstream commit 2c77734642d52448aca673e889b39f981110828b ] The left time value is wrong when we get it by sysfs. The left time value should be equal to preset timeout value minus elapsed time value. According to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved to BIT[16-31] of the WATCHDOG_TCNT. [0]: http://linux-meson.com Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver") Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798DGuenter Roeck
[ Upstream commit 57cbf0e3a0fd48e5ad8f3884562e8dde4827c1c8 ] The watchdog controller on NCT6796D, NCT6797D, and NCT6798D is compatible with the wtachdog controller on other Nuvoton chips. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24watchdog: sama5d4: fix timeout-sec usageRomain Izard
[ Upstream commit 2e0432f8f8ad11b4bd208445360220efa5b37d82 ] When using watchdog_init_timeout to update the default timeout value, an error means that there is no "timeout-sec" in the relevant device tree node. This should not prevent binding of the driver to the device. Fixes: 976932e40036 ("watchdog: sama5d4: make use of timeout-secs provided in devicetree") Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24watchdog: renesas_wdt: stop when unregisteringWolfram Sang
[ Upstream commit 14de99b44b34dbb9d0f64845b1cbb675e047767e ] We want to go into a sane state when unregistering. Currently, it happens that the watchdog stops when unbinding because of RuntimePM stopping the core clock. When rebinding, the core clock gets reactivated and the watchdog fires even though it hasn't been opened by userspace yet. Strange scenario, yes, but sane state is much preferred anyhow. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24watchdog: core: fix null pointer dereference when releasing cdevWolfram Sang
[ Upstream commit 953b9dd7725bad55a922a35e75bff7bebf7b9978 ] watchdog_stop() calls watchdog_update_worker() which needs a valid wdd->wd_data pointer. So, when unregistering the cdev, clear the pointers after we call watchdog_stop(), not before. Fixes: bb292ac1c602 ("watchdog: Introduce watchdog_stop_on_unregister helper") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-11watchdog: aspeed: Add support for AST2600Ryan Chen
[ Upstream commit b3528b4874480818e38e4da019d655413c233e6a ] The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-11watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeoutRasmus Villemoes
commit 144783a80cd2cbc45c6ce17db649140b65f203dd upstream. Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-06watchdog: bcm2835_wdt: Fix module autoloadStefan Wahren
[ Upstream commit 215e06f0d18d5d653d6ea269e4dfc684854d48bf ] The commit 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") broke module autoloading on Raspberry Pi. So add a module alias this fix this. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15watchdog: fix compile time error of pretimeout governorsVladimir Zapolskiy
[ Upstream commit a223770bfa7b6647f3a70983257bd89f9cafce46 ] CONFIG_WATCHDOG_PRETIMEOUT_GOV build symbol adds watchdog_pretimeout.o object to watchdog.o, the latter is compiled only if CONFIG_WATCHDOG_CORE is selected, so it rightfully makes sense to add it as a dependency. The change fixes the next compilation errors, if CONFIG_WATCHDOG_CORE=n and CONFIG_WATCHDOG_PRETIMEOUT_GOV=y are selected: drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_register': drivers/watchdog/pretimeout_noop.c:35: undefined reference to `watchdog_register_governor' drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_unregister': drivers/watchdog/pretimeout_noop.c:40: undefined reference to `watchdog_unregister_governor' drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_register': drivers/watchdog/pretimeout_panic.c:35: undefined reference to `watchdog_register_governor' drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_unregister': drivers/watchdog/pretimeout_panic.c:40: undefined reference to `watchdog_unregister_governor' Reported-by: Kuo, Hsuan-Chi <hckuo2@illinois.edu> Fixes: ff84136cb6a4 ("watchdog: add watchdog pretimeout governor framework") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15watchdog: imx2_wdt: Fix set_timeout for big timeout valuesGeorg Hofmann
[ Upstream commit b07e228eee69601addba98b47b1a3850569e5013 ] The documentated behavior is: if max_hw_heartbeat_ms is implemented, the minimum of the set_timeout argument and max_hw_heartbeat_ms should be used. This patch implements this behavior. Previously only the first 7bits were used and the input argument was returned. Signed-off-by: Georg Hofmann <georg@hofmannsweb.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problemNeilBrown
[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ] These files need #include <linux/mod_devicetable.h> to compile correctly. Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: NeilBrown <neil@brown.name> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12watchdog: renesas_wdt: don't set divider while watchdog is runningWolfram Sang
[ Upstream commit e990e12741877e9bfac402ca468f4007a75f6e2a ] The datasheet says we must stop the timer before changing the clock divider. This can happen when the restart handler is called while the watchdog is running. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-22include/linux/compiler*.h: make compiler-*.h mutually exclusiveNick Desaulniers
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") recently exposed a brittle part of the build for supporting non-gcc compilers. Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and __GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't added compiler specific checks for __clang__ or __INTEL_COMPILER. This is brittle, as they happened to get compatibility by posing as a certain version of GCC. This broke when upgrading the minimal version of GCC required to build the kernel, to a version above what ICC and Clang claim to be. Rather than always including compiler-gcc.h then undefining or redefining macros in compiler-intel.h or compiler-clang.h, let's separate out the compiler specific macro definitions into mutually exclusive headers, do more proper compiler detection, and keep shared definitions in compiler_types.h. Fixes: cafa0010cd51 ("Raise the minimum required gcc version to 4.6") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Eli Friedman <efriedma@codeaurora.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18Merge tag 'linux-watchdog-4.19-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add MEN 16z069 IP-Core driver - renesas-wdt: add support for the R8A77990 wdt - stm32_iwdg: Add stm32mp1 support and pclk feature - sp805_wdt, orion_wdt, sprd_wdt: several improvements - imx2_wdt, stmp3xxx: switch to SPDX identifier * tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: fix dependencies of menz69_wdt.o watchdog: sp805: Add clock-frequency property watchdog: add driver for the MEN 16z069 IP-Core watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe() watchdog: stmp3xxx: Switch to SPDX identifier watchdog: imx2_wdt: Switch to SPDX identifier watchdog: sp805: set WDOG_HW_RUNNING when appropriate watchdog: sp805: add 'timeout-sec' DT property support dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805 dt-bindings: watchdog: Consolidate SP805 binding docs watchdog: orion_wdt: Mark watchdog as active when running at probe watchdog: stm32: add pclk feature for stm32mp1 dt-bindings: watchdog: add stm32mp1 support dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
2018-08-06watchdog: fix dependencies of menz69_wdt.oJohannes Thumshirn
Currently menz69_wdt.ko has a dependency on MCB or COMPILE_TEST. But it actually needs symbols exported by MCB so the || COMPILE_TEST is wrong. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-06watchdog: sp805: Add clock-frequency propertySrinath Mannam
Use clock-frequency property given in _DSD object of ACPI device to calculate Watchdog rate as binding clock devices are not available as device tree. Note: There is no formal review process for _DSD properties Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: add driver for the MEN 16z069 IP-CoreJohannes Thumshirn
Add a driver for the MEN 16z069 Watchdog and Reset Controller IP-Core. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Michael Moese <mmoese@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: stmp3xxx: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: imx2_wdt: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: sp805: set WDOG_HW_RUNNING when appropriateRay Jui
If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework, until the userspace watchdog daemon takes over control Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: sp805: add 'timeout-sec' DT property supportRay Jui
Add support for optional devicetree property 'timeout-sec'. 'timeout-sec' is used in the driver if specified in devicetree. Otherwise, fall back to driver default, i.e., 60 seconds Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: orion_wdt: Mark watchdog as active when running at probeMaxim Kochetkov
If the watchdog is fully enabled and running at probe, mark it as such so the watchdog core can handle it until the watchdog device is opened. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [groeck: Updated subject and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: stm32: add pclk feature for stm32mp1Ludovic Barre
This patch adds compatible data to manage pclk clock by compatible. Adds stm32mp1 support which requires pclk clock. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12Merge tag 'mips_4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.18. Rough overview: - MAINTAINERS: Add Paul Burton as MIPS co-maintainer - Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes - Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated switch, Ingenic watchdog cleanups More detailed summary: Maintainers: - Add Paul Burton as MIPS co-maintainer, as I soon won't have access to much MIPS hardware, nor enough time to properly maintain MIPS on my own. Miscellaneous: - Use generic GCC library routines from lib/ - Add notrace to generic ucmpdi2 implementation - Rename compiler intrinsic selects to GENERIC_LIB_* - vmlinuz: Use generic ashldi3 - y2038: Convert update/read_persistent_clock() to *_clock64() - sni: Remove read_persistent_clock() - perf: Fix perf with MT counting other threads - Probe for per-TC perf counters in cpu-probe.c - Use correct VPE ID for VPE tracing Minor cleanups: - Avoid unneeded built-in.a in DTS dirs - sc-debugfs: Re-use kstrtobool_from_user - memset.S: Reinstate delay slot indentation - VPE: Fix spelling "uneeded" -> "Unneeded" Platform support: BCM47xx: - Add support for Netgear WNR1000 V3 - firmware: Support small NVRAM partitions - Use __initdata for LEDs platform data Ingenic: - Watchdog driver & platform code improvements: - Disable clock after stopping counter - Use devm_* functions - Drop module remove function - Move platform reset code to restart handler in driver - JZ4740: Convert watchdog instantiation to DT - JZ4780: Fix watchdog DT node - qi_lb60_defconfig: Enable watchdog driver Microsemi: - Ocelot: Add support for integrated switch - pcb123: Connect phys to ports" * tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MAINTAINERS: Add Paul Burton as MIPS co-maintainer MIPS: ptrace: Make FPU context layout comments match reality MIPS: memset.S: Reinstate delay slot indentation MIPS: perf: Fix perf with MT counting other threads MIPS: perf: Use correct VPE ID when setting up VPE tracing MIPS: perf: More robustly probe for the presence of per-tc counters MIPS: Probe for MIPS MT perf counters per TC MIPS: mscc: Connect phys to ports on ocelot_pcb123 MIPS: mscc: Add switch to ocelot MIPS: JZ4740: Drop old platform reset code MIPS: qi_lb60: Enable the jz4740-wdt driver MIPS: JZ4780: dts: Fix watchdog node MIPS: JZ4740: dts: Add bindings for the jz4740-wdt driver watchdog: JZ4740: Drop module remove function watchdog: JZ4740: Register a restart handler watchdog: JZ4740: Use devm_* functions watchdog: JZ4740: Disable clock after stopping counter MIPS: VPE: Fix spelling mistake: "uneeded" -> "unneeded" MIPS: Re-use kstrtobool_from_user() MIPS: Convert update_persistent_clock() to update_persistent_clock64() ...
2018-06-07watchdog: da9063: remove duplicated timeout_to_sel callsMarco Felsch
Every time da9063_wdt_update_timeout() gets called a timeout_to_sel() is made because the timeout argument of update_timeout() is the raw register value. Moving the second<->raw-value translation into da9063_wdt_update_timeout() removes duplicated code. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-07watchdog: da9063: rename helper function to avoid misunderstandingsMarco Felsch
_da9063_wdt_set_timeout() is called by da9063_wdg_set_timeout(), da9063_wdg_start() and da9063_wdg_probe() but the name expect only to be called by da9063_wdg_set_timeout(). Rename the function to avoid misunderstandings. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9062: remove unused codeMichael Grzeschik
The patch "watchdog: da9062: use protection delay mechanism from core" (fb484262) removed the only user of j_time_stamp. This turned into some leftover functions that are removed with this patch. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9063: Fix timeout handling during probeMarco Felsch
The watchdog can be enabled in previous steps (e.g. the bootloader). Set the driver default timeout value (8s) if the watchdog is already running and the HW_RUNNING flag. So the watchdog core framework will ping the watchdog till the user space activates the watchdog explicit with the desired timeout value. Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9063: Fix updating timeout valueMarco Felsch
The DA9063 watchdog has only one register field to store the timeout value and to enable the watchdog. The watchdog gets enabled if the value is not zero. There is no issue if the watchdog is already running but it leads into problems if the watchdog is disabled. If the watchdog is disabled and only the timeout value should be prepared the watchdog gets enabled too. Add a check to get the current watchdog state and update the watchdog timeout value on hw-side only if the watchdog is already active. Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9063: Fix setting/changing timeoutMarco Felsch
If the timeout value is set more than once the DA9063 watchdog triggers a reset signal which reset the system. To update the timeout value we have to disable the watchdog, clear the watchdog counter value and write the new timeout value to the watchdog. Clearing the counter value is a feature to be on the safe side because the data sheet doesn't describe the behaviour of the watchdog counter value after a watchdog disabling-enable-sequence. The patch is based on Philipp Zabel's previous patch. Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-05-21watchdog: mena21_wdt: Drop unnecessary mutex lockJia-Ju Bai
There is already a mutex in the watchdog core which serializes calls to the various API functions. So the mutex lock "drv->lock" is unnecessary and can be dropped. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21watchdog: hpwdt: Claim NMIs generated by iLO5Jerry Hoemann
On iLO5 going forward we want to return and not claim the NMI, if the NMI was NOT gnerated by the iLO as a result of the watchdog timing out or an explicit generate NMI. The sense of the test in is inverted and prevents hpwdt_pretimeout from claiming NMIs when it should. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Fixes: a042229a18ac ("watchdog: hpwdt: Update nmi_panic message.") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21watchdog: sp805: add restart handlerJongsung Kim
Add restart handler for SP805 watchdog so that the driver can be used to reboot the system. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklistGeert Uytterhoeven
System restart triggered by watchdog time-out works fine on a Koelsch board with R-Car M2-W ES2.0. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21watchdog: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 00:41:54 +0000