aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/core/fbcon.c
AgeCommit message (Collapse)Author
2020-08-18fbcon: prevent user font height or width change from causing potential ↵George Kennedy
out-of-bounds access Add a check to fbcon_resize() to ensure that a possible change to user font height or user font width will not allow a font data out-of-bounds access. NOTE: must use original charcount in calculation as font charcount can change and cannot be used to determine the font data allocated size. Signed-off-by: George Kennedy <george.kennedy@oracle.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-06Merge tag 'tty-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the large set of TTY and Serial driver patches for 5.9-rc1. Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt and console code. Other highlights include: - much needed vt/vc code cleanup from Jiri Slaby - 8250 driver fixes and additions - various serial driver updates and feature enhancements - locking cleanup for serial/console initializations - other minor cleanups All of these have been in linux-next with no reported issues" * tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits) MAINTAINERS: enlist Greg formally for console stuff vgacon: Fix for missing check in scrollback handling Revert "serial: 8250: Let serial core initialise spin lock" serial: 8250: Let serial core initialise spin lock tty: keyboard, do not speculate on func_table index serial: stm32: Add RS485 RTS GPIO control serial: 8250_dw: Fix common clocks usage race condition serial: 8250_dw: Pass the same rate to the clk round and set rate methods serial: 8250_dw: Simplify the ref clock rate setting procedure serial: 8250: Add 8250 port clock update method tty: serial: imx: add imx earlycon driver tty: serial: imx: enable imx serial console port as module tty/synclink: remove leftover bits of non-PCI card support tty: Use the preferred form for passing the size of a structure type tty: Fix identation issues in struct serial_struct32 tty: Avoid the use of one-element arrays serial: msm_serial: add sparse context annotation serial: pmac_zilog: add sparse context annotation newport_con: vc_color is now in state serial: imx: use hrtimers for rs485 delays ...
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-20Merge 5.8-rc6 into tty-nextGreg Kroah-Hartman
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10fbcon: Use array3_size() helper in scr_memcpyw()Gustavo A. R. Silva
Use array3_size() helper instead of the open-coded version in scr_memcpyw() and scr_memsetw(). These sorts of multiplication factors need to be wrapped in array3_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200615231542.GA20470@embeddedor
2020-06-24drm/fb-helper: Fix vt restoreDaniel Vetter
In the past we had a pile of hacks to orchestrate access between fbdev emulation and native kms clients. We've tried to streamline this, by always preferring the kms side above fbdev calls when a drm master exists, because drm master controls access to the display resources. Unfortunately this breaks existing userspace, specifically Xorg. When exiting Xorg first restores the console to text mode using the KDSET ioctl on the vt. This does nothing, because a drm master is still around. Then it drops the drm master status, which again does nothing, because logind is keeping additional drm fd open to be able to orchestrate vt switches. In the past this is the point where fbdev was restored, as part of the ->lastclose hook on the drm side. Now to fix this regression we don't want to go back to letting fbdev restore things whenever it feels like, or to the pile of hacks we've had before. Instead try and go with a minimal exception to make the KDSET case work again, and nothing else. This means that if userspace does a KDSET call when switching between graphical compositors, there will be some flickering with fbcon showing up for a bit. But a) that's not a regression and b) userspace can fix it by improving the vt switching dance - logind should have all the information it needs. While pondering all this I'm also wondering wheter we should have a SWITCH_MASTER ioctl to allow race-free master status handover. But that's for another day. v2: Somehow forgot to cc all the fbdev people. v3: Fix typo Alex spotted. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179 Cc: shlomo@fastmail.com Reported-and-Tested-by: shlomo@fastmail.com Cc: Michel Dänzer <michel@daenzer.net> Fixes: 64914da24ea9 ("drm/fbdev-helper: don't force restores") Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.7+ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
2020-06-24vt: use newly defined CUR_* macrosJiri Slaby
We defined macros for all the magic constants in the previous patch. So let us use the macro in the code now. No functional change intended. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-parisc@vger.kernel.org Acked-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/20200615074910.19267-26-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vc: separate stateJiri Slaby
There are two copies of some members of struct vc_data. This is because we need to save them and restore later. Move these memebers to a separate structure called vc_state. So now instead of members like: vc_x, vc_y and vc_saved_x, vc_saved_y we have state and saved_state (of type: struct vc_state) containing state.x, state.y and saved_state.x, saved_state.y This change: * makes clear what is saved & restored * eases save & restore by using memcpy (see save_cur and restore_cur) Finally, we document the newly added struct vc_state using kernel-doc. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-31fbcon: fix null-ptr-deref in fbcon_switchQiujun Huang
Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated. syzkaller report: https://lkml.org/lkml/2020/3/27/403 general protection fault, probably for non-canonical address 0xdffffc000000006c: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367] RIP: 0010:fbcon_switch+0x28f/0x1740 drivers/video/fbdev/core/fbcon.c:2260 Call Trace: redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008 vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295 fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219 visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062 do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542 do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122 do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588 fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259 do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline] register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832 dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735 usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374 accessing vc_cons[logo_shown].d->vc_top causes the bug. Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.com
2020-01-15fbcon: Adjust indentation in set_con2fb_mapNathan Chancellor
Clang warns: ../drivers/video/fbdev/core/fbcon.c:915:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return err; ^ ../drivers/video/fbdev/core/fbcon.c:912:2: note: previous statement is here if (!search_fb_in_map(info_idx)) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. This happens on several lines in this function; normalize them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. This warning was introduced before the beginning of git history so no fixes tab. Link: https://github.com/ClangBuiltLinux/linux/issues/824 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218025337.35044-1-natechancellor@gmail.com
2020-01-03fbdev: fbmem: allow overriding the number of bootup logosPeter Rosin
Probably most useful if you want no logo at all, or if you only want one logo regardless of how many CPU cores you have. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827110854.12574-3-peda@axentia.se
2019-06-19fbcon: Export fbcon_update_vcsDaniel Vetter
I failed to spot this while compile-testing. Oops. Reported-by: kbuild test robot <lkp@intel.com> Fixes: 9e1467002630 ("fbcon: replace FB_EVENT_MODE_CHANGE/_ALL with direct calls") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Lukas Wunner <lukas@wunner.de> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619081115.27921-1-daniel.vetter@ffwll.ch
2019-06-13fbcon: Document what I learned about fbcon lockingDaniel Vetter
It's not pretty. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-32-daniel.vetter@ffwll.ch
2019-06-12fbcon: Call con2fb_map functions directlyDaniel Vetter
These are actually fbcon ioctls which just happen to be exposed through /dev/fb*. They completely ignore which fb_info they're called on, and I think the userspace tool even hardcodes to /dev/fb0. Hence just forward the entire thing to fbcon.c wholesale. Note that this patch drops the fb_lock/unlock on the set side. Since the ioctl can operate on any fb (as passed in through con2fb.framebuffer) this is bogus. Also note that fbcon.c in general never calls fb_lock on anything, so this has been badly broken already. With this the last user of the fbcon notifier callback is gone, and we can garbage collect that too. v2: add missing uaccess.h include (alpha fails to compile otherwise), reported by kbuild. v3: Remember to also drop the #defines (Maarten) v4: Add the static inline to dummy functions. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-31-daniel.vetter@ffwll.ch
2019-06-12vgaswitcheroo: call fbcon_remap_all directlyDaniel Vetter
While at it, clean up the interface a bit and push the console locking into fbcon.c. v2: Remove now outdated comment (Lukas). v3: Forgot to add static inline to the dummy function. Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-30-daniel.vetter@ffwll.ch
2019-06-12fbcon: replace FB_EVENT_MODE_CHANGE/_ALL with direct callsDaniel Vetter
Create a new wrapper function for this, feels like there's some refactoring room here between the two modes. v2: backlight notifier is also interested in the mode change event, it calls lcd->set_mode, of which there are 3 implementations. Thanks to Maarten for spotting this. So we keep that. We can ditch the differentiation between mode change and all mode changes (because backlight notifier doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too, because that's just to prevent recursion between fbmem.c and fbcon.c. While at it flatten the control flow a bit. v3: Need to add a static inline to the dummy function. v4: Add missing #include <fbcon.h> to sh_mob (Sam). Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
2019-06-12fbdev: remove FBINFO_MISC_USEREVENT around fb_blankDaniel Vetter
With the recursion broken in the previous patch we can drop the FBINFO_MISC_USEREVENT flag around calls to fb_blank - recursion prevention was it's only job. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-27-daniel.vetter@ffwll.ch
2019-06-12Revert "backlight/fbcon: Add FB_EVENT_CONBLANK"Daniel Vetter
This reverts commit 994efacdf9a087b52f71e620b58dfa526b0cf928. The justification is that if hw blanking fails (i.e. fbops->fb_blank) fails, then we still want to shut down the backlight. Which is exactly _not_ what fb_blank() does and so rather inconsistent if we end up with different behaviour between fbcon and direct fbdev usage. Given that the entire notifier maze is getting in the way anyway I figured it's simplest to revert this not well justified commit. v2: Add static inline to the dummy version. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-25-daniel.vetter@ffwll.ch
2019-06-12fbdev: Call fbcon_get_requirement directlyDaniel Vetter
Pretty simple case really. v2: Forgot to remove a break; v3: Add static inline to the dummy versions. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-24-daniel.vetter@ffwll.ch
2019-06-12fbcon: Call fbcon_mode_deleted/new_modelist directlyDaniel Vetter
I'm not entirely clear on what new_modelist actually does, it seems exclusively for a sysfs interface. Which in the end does amount to a normal fb_set_par to check the mode, but then takes a different path in both fbmem.c and fbcon.c. I have no idea why these 2 paths are different, but then I also don't really want to find out. So just do the simple conversion to a direct function call. v2: static inline for the dummy versions, I forgot. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Rosin <peda@axentia.se> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-23-daniel.vetter@ffwll.ch
2019-06-12fbdev: directly call fbcon_suspended/resumedDaniel Vetter
With the sh_mobile notifier removed we can just directly call the fbcon code here. v2: Remove now unused local variable. v3: fixup !CONFIG_FRAMEBUFFER_CONSOLE, noticed by kbuild Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-22-daniel.vetter@ffwll.ch
2019-06-12fbcon: call fbcon_fb_bind directlyDaniel Vetter
Also remove the error return value. That's all errors for either driver bugs (trying to unbind something that isn't bound), or errors of the new driver that will take over. There's nothing the outgoing driver can do about this anyway, so switch over to void. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: Kees Cook <keescook@chromium.org> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-18-daniel.vetter@ffwll.ch
2019-06-12fbdev: lock_fb_info cannot failDaniel Vetter
Ever since commit c47747fde931c02455683bd00ea43eaa62f35b0e Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Wed May 11 14:58:34 2011 -0700 fbmem: make read/write/ioctl use the frame buffer at open time fbdev has gained proper refcounting for the fbinfo attached to any open files, which means that the backing driver (stored in fb_info->fbops) cannot untimely disappear anymore. The only thing that can happen is that the entire device just outright disappears and gets unregistered, but file_fb_info does check for that. Except that it's racy - it only checks once at the start of a file_ops, there's no guarantee that the underlying fbdev won't untimely disappear. Aside: A proper way to fix that race is probably to replicate the srcu trickery we've rolled out in drm. But given that this race has existed since forever it's probably not one we need to fix right away. do_unregister_framebuffer also nowhere clears fb_info->fbops, hence the check in lock_fb_info can't possible catch a disappearing fbdev later on. Long story short: Ever since the above commit the fb_info->fbops checks have essentially become dead code. Remove this all. Aside from the file_ops callbacks, and stuff called from there there's only register/unregister code left. If that goes wrong a driver managed to register/unregister a device instance twice or in the wrong order. That's just a driver bug. v2: - fb_mmap had an open-coded version of the fbinfo->fops check, because it doesn't need the fbinfo->lock. Delete that too. - Use the wrapper function in fb_open/release now, since no difference anymore. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Peter Rosin <peda@axentia.se> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-17-daniel.vetter@ffwll.ch
2019-06-12fbcon: call fbcon_fb_(un)registered directlyDaniel Vetter
With commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev we have a static dependency between fbcon and fbdev, and we can replace the indirection through the notifier chain with a function call. v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too, and listens to this. ... Looking at the code it seems to wait for some fb to show up, so that it can get the framebuffer base address from the fb_info struct. I suspect his is some firmware fbdev. Then it uses that information to let the real fbdev driver (metronomefb.c by the looks) get at the framebuffer memory. This doesn't looke like it's easy to fix (except by deleting the entire thing, seems untouched since 2008, we might be able to get away with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and cry over them for a bit. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
2019-06-12fbcon: Remove fbcon_has_exitedDaniel Vetter
This is unused code since commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev when fbcon was made a compile-time static dependency of fbdev. We can't exit fbcon anymore without exiting fbdev first, which only works if all fbdev drivers have unloaded already. Hence this is all dead code. v2: I missed that fbcon_exit is also called from con_deinit stuff, and there fbcon_has_exited prevents double-cleanup. But we can fix that by properly resetting con2fb_map[] to all -1, which is used everywhere else to indicate "no fb_info allocate to this console". With that change the double-cleanup (which resulted in a module refcount underflow, among other things) is prevented. Aside: con2fb_map is a signed char, so don't register more than 128 fb_info or hilarity will ensue. v3: CI showed me that I still didn't fully understand what's going on here. The leaked references in con2fb_map have been used upon rebinding the fb console in fbcon_init. It worked because fbdev unregistering still cleaned out con2fb_map, and reset it to info_idx. If the last fbdev driver unregistered, then it also reset info_idx, and unregistered the fbcon driver. Imo that's all a bit fragile, so let's keep the con2fb_map reset to -1, and in fbcon_init pick info_idx if we're starting fresh. That means unbinding and rebinding will cleanse the mapping, but why are you doing that if you want to retain the mapping, so should be fine. Also, I think info_idx == -1 is impossible in fbcon_init - we unregister the fbcon in that case. So catch&warn about that. v4: Drop unecessary assignment - I forgot to delete the first assignment of info in fbcon_init. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-10-daniel.vetter@ffwll.ch
2019-06-12fbcon: s/struct display/struct fbcon_display/Daniel Vetter
This was formerly used in fbdev drivers (not sure why, predates most git history), but now it's entirely an fbcon internal thing. Give it a more specific name. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Peter Rosin <peda@axentia.se> Cc: Yisheng Xie <ysxie@foxmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-9-daniel.vetter@ffwll.ch
2019-05-24vt/fbcon: deinitialize resources in visual_init() after failed memory allocationGrzegorz Halat
After memory allocation failure vc_allocate() doesn't clean up data which has been initialized in visual_init(). In case of fbcon this leads to divide-by-0 in fbcon_init() on next open of the same tty. memory allocation in vc_allocate() may fail here: 1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); on next open() fbcon_init() skips vc_font.data initialization: 1088: if (!p->fontdata) { division by zero in fbcon_init() happens here: 1149: new_cols /= vc->vc_font.width; Additional check is needed in fbcon_deinit() to prevent usage of uninitialized vc_screenbuf: 1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf) 1252: set_vc_hi_font(vc, false); Crash: #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4 [exception RIP: fbcon_init+463] RIP: ffffffff814b860f RSP: ffffc90001eafb18 RFLAGS: 00010246 ... #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c #9 [ffffc90001eafbc8] con_install at ffffffff8154f624 ... Signed-off-by: Grzegorz Halat <ghalat@redhat.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06fbcon: Don't reset logo_shown when logo is currently shownAndreas Schwab
When the logo is currently drawn on a virtual console, and the console loglevel is reduced to quiet, logo_shown must be left alone, so that it the scrolling region on that virtual console is properly reset. Fixes: 10993504d647 ("fbcon: Silence fbcon logo on 'quiet' boots") Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Marko Myllynen <myllynen@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-02-08fbcon: Silence fbcon logo on 'quiet' bootsPrarit Bhargava
On text-based systems the 'quiet' boot option will show printk levels higher than CONSOLE_LOGLEVEL_QUIET. The displaying of the Tux logo during boot can cause some consoles to lose display data and as a result confuse the end user. Do not display the Tux logo on systems that are in 'quiet' boot. v2: It helps to commit all my changes before sending them. Remove extra bracket. v3: buildbot error fix: fbcon can be built as part of a module so export console_printk v4: move console_printk change to separate patch, and drop logo cleanup v5: Only set FBCON_LOGO_DONTSHOW for console loglevel Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Marko Myllynen <myllynen@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thierry Reding <treding@nvidia.com> Cc: Yisheng Xie <ysxie@foxmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-02-08fbcon: use kvmalloc() for scrollback bufferKonstantin Khorenko
Scrollback frame buffer is rather big - 32K, so it requires 3rd order page, so let's use kvmalloc() instead of ordinary kmalloc() for it. Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-01-16fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line optionPeter Rosin
A command line option is much more flexible than a config option and the supporting code is small. Gets rid of #ifdefs in the code too... Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-12-20fbdev: fbcon: Fix unregister crash when more than one framebufferNoralf Trønnes
When unregistering fbdev using unregister_framebuffer(), any bound console will unbind automatically. This is working fine if this is the only framebuffer, resulting in a switch to the dummy console. However if there is a fb0 and I unregister fb1 having a bound console, I eventually get a crash. The fastest way for me to trigger the crash is to do a reboot, resulting in this splat: [ 76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c [ 76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm] [ 76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4 [ 76.478933] Hardware name: BCM2835 [ 76.478949] Backtrace: [ 76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24) [ 76.479022] r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81 [ 76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28) [ 76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c) [ 76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58) [ 76.479165] r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84 [ 76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c) [ 76.479222] r6:d7666a00 r5:c0e918ee r4:dbc4e700 [ 76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88) [ 76.479281] r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00 [ 76.479298] r4:20000113 [ 76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54) [ 76.479374] r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc [ 76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230) [ 76.479435] r4:c0e9192f r3:d758a340 [ 76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c) [ 76.479495] r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8 [ 76.479513] r4:d8a8fabc [ 76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184) [ 76.479570] r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280 [ 76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc) [ 76.479632] r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002 [ 76.479650] r4:c0eb65ec [ 76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168) [ 76.479716] r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0 [ 76.479734] r4:00000000 [ 76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0) [ 76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48) [ 76.479823] r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8 [ 76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98) The problem is in the console rebinding in fbcon_fb_unbind(). It uses the virtual console index as the new framebuffer index to bind the console(s) to. The correct way is to use the con2fb_map lookup table to find the framebuffer index. Fixes: cfafca8067c6 ("fbdev: fbcon: console unregistration from unregister_framebuffer") Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-11vt: Remove vc_panic_force_writeDaniel Vetter
It was only used by the panic support in fbcon, which is now gone. Remove this now dead code too. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Meng Xu <mengxu.gatech@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Mike Frysinger <vapier@chromium.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-2-daniel.vetter@ffwll.ch
2018-09-11fbdev: Drop FBINFO_CAN_FORCE_OUTPUT flagDaniel Vetter
This was only added for the drm's fbdev emulation support, so that it would try harder to show the Oops. Unfortunately this never really worked reliably, and in practice ended up pushing the real Oops off the screen due to plentyfull locking, sleep-while-atomic and other issues. So we removed all that support from the fbdev emulation a while back. Aside: We've also removed the kgdb support, for similar reasons. Since it's such a small patch I figured I don't split this up into the usual 3-phase removal. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: nouveau@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-1-daniel.vetter@ffwll.ch
2018-08-10fbcon: Do not takeover the console from atomic contextHans de Goede
Taking over the console involves allocating mem with GFP_KERNEL, talking to drm drivers, etc. So this should not be done from an atomic context. But the console-output trigger deferred console takeover may happen from an atomic context, which leads to "BUG: sleeping function called from invalid context" errors. This commit fixes these errors by doing the deferred takeover from a workqueue. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [b.zolnierkie: remove unused variable] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-08-10fbcon: Only defer console takeover if the current console driver is the dummyconHans de Goede
We rely on dummycon's output notifier mechanism to defer the takeover. If say vgacon is the current console driver then dummycon will never get used so its output notifier will also never get called and fbcon never takes over. This commit fixes this by only deferring the console takeover if the current console driver is the dummycon driver. This commit also moves the entirety of fbcon_start under the console_lock, since the conswitchp which fbcon_start now checks is protected by it. This commit also inlines fbcon_register_output_notifier, since we now need a #ifdef CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER in fbcon_start anyways because of the write access to the deferred_takeover variable, this has the added advantage that it puts the dummycon_register_output_notifier() call directly after the "conswitchp != &dummy_con" comparison making it clear why that check is there. Note the arch setup code will set conswitchp to either dummy_con or vga_con, in the cases where it gets set to vga_con even though their is no vga_con present we rely on vga_con_startup() to set conswitchp to dummy_con. vga_con_startup() is guaranteed to happen before fb_console_init() as it gets called as a console_initcall where as fb_console_init() gets called as a subsys_initcall. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-24fbcon: introduce for_each_registered_fb() helperYisheng Xie
Following pattern is often used: for (i = 0; i < FB_MAX; i++) { if (registered_fb[i]) { ... } } Therefore, as Andy's suggestion, for_each_registered_fb() helper can be introduced to make the code easier to read and write by reducing indentation level. It also saves few lines of code in each occurrence. This patch convert all part here at the same time. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yisheng Xie <ysxie@foxmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Lechner <david@lechnology.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-06-28console/fbcon: Add support for deferred console takeoverHans de Goede
Currently fbcon claims fbdevs as soon as they are registered and takes over the console as soon as the first fbdev gets registered. This behavior is undesirable in cases where a smooth graphical bootup is desired, in such cases we typically want the contents of the framebuffer (typically a vendor logo) to stay in place as is. The current solution for this problem (on embedded systems) is to not enable fbcon. This commit adds a new FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER config option, which when enabled defers fbcon taking over the console from the dummy console until the first text is displayed on the console. Together with the "quiet" kernel commandline option, this allows fbcon to still be used together with a smooth graphical bootup, having it take over the console as soon as e.g. an error message is logged. Note the choice to detect the first console output in the dummycon driver, rather then handling this entirely inside the fbcon code, was made after 2 failed attempts to handle this entirely inside the fbcon code. The fbcon code is woven quite tightly into the console code, making this to only feasible option. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-06-28fbcon: Call WARN_CONSOLE_UNLOCKED() where applicableHans de Goede
Replace comments about places where the console lock should be held with calls to WARN_CONSOLE_UNLOCKED() to assert that it is actually held. Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-27console: Expand dummy functions for CFIKees Cook
This expands the no-op dummy functions into full prototypes to avoid indirect call mismatches when running under Control Flow Integrity checking, like with Clang's -fsanitize=cfi. Co-Developed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-04fbcon: Remove dmi quirk tableHans de Goede
This is now all handled in the drivers and communicated through fb_info.fbcon_rotate_hint. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-8-hdegoede@redhat.com
2017-12-04fbcon: Add fbcon_rotate_hint to struct fb_infoHans de Goede
On some hardware the LCD panel is not mounted upright in the casing, but upside-down or rotated 90 degrees. In this case we want the console to automatically be rotated to compensate. The fbdev-driver may know about the need to rotate. Add a new fbcon_rotate_hint field to struct fb_info, which gets initialized to -1. If the fbdev-driver knows that some sort of rotation is necessary then it can set this field to a FB_ROTATE_* value to tell the fbcon console driver to rotate the console. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-2-hdegoede@redhat.com
2017-11-13fbcon: Initialize ops->info earlyThierry Reding
During console takeover, which happens for all DRM/KMS setups using the fbdev helpers, fbcon_startup() is called before fbcon_init() and as a result con2fb_acquire_newinfo() will not be called (info->fbcon_par was set to non-NULL in fbcon_startup()) to assign ops->info. This causes the cursor_timer_handler() to unreference a NULL pointer. Avoid this by unconditionally assigning ops->info during fbcon_startup() so that it will be available early, but keep the additional assignment in con2fb_acquire_newinfo() to support console remapping at runtime. Signed-off-by: Thierry Reding <treding@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-10video: fbdev: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. One tracking pointer was added. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Lechner <david@lechnology.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jean Delvare <jdelvare@suse.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> [b.zolnierkie: ported it over pxa3xx_gcu changes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-09-04fbcon: remove restriction on margin colorDavid Lechner
This removes the restriction on the value range of the fbcon=margin: parameter. The color value really depends on the driver being used. Signed-off-by: David Lechner <david@lechnology.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> [b.zolnierkie: ported over fbcon changes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-18fbcon: add fbcon=margin:<color> command line optionDavid Lechner
This adds a new command line option to select the fbcon margin color. The motivation for this is screens where black does not blend into the physical surroundings of the screen. For example, using an LCD (not the backlit kind), white text on a black background is hard to read, so inverting the colors is preferred. However, when you do this, most of the screen is filled with white but the margins are still filled with black. This makes a big, black, backwards 'L' on the screen. By setting fbcon=margin:7, the margins will be filled with white and the LCD looks as expected. Signed-off-by: David Lechner <david@lechnology.com> [b.zolnierkie: ported over fbcon changes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-18video/console: Add dmi quirk table for x86 systems which need fbcon rotationHans de Goede
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so we need to rotate the fbcon to compensate. This commit adds a DMI based quirk table which is initially populated with 4 such devices: The Asus T100HA, GPD Pocket, the GPD win and the I.T.Works TW891, so that the console comes up in the right orientation on these devices OOTB. Unfortunately these (cheap) devices also typically have quite generic DMI data, so we match on a combination of DMI data, screen resolution and a list of known BIOS dates to avoid false positives. Suggested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> [b.zolnierkie: ported over fbcon changes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01fbdev: Nuke FBINFO_MODULEDaniel Vetter
Instead check info->ops->owner, which amounts to the same. Spotted because I want to remove the pile of broken and cargo-culted fb_info->flags assignments in drm drivers. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01fbcon: Make fbcon a built-time depency for fbdevDaniel Vetter
There's a bunch of folks who're trying to make printk less contended and faster, but there's a problem: printk uses the console_lock, and the console lock has become the BKL for all things fbdev/fbcon, which in turn pulled in half the drm subsystem under that lock. That's awkward. There reasons for that is probably just a historical accident: - fbcon is a runtime option of fbdev, i.e. at runtime you can pick whether your fbdev driver instances are used as kernel consoles. Unfortunately this wasn't implemented with some module option, but through some module loading magic: As long as you don't load fbcon.ko, there's no fbdev console support, but loading it (in any order wrt fbdev drivers) will create console instances for all fbdev drivers. - This was implemented through a notifier chain. fbcon.ko enumerates all fbdev instances at load time and also registers itself as listener in the fbdev notifier. The fbdev core tries to register new fbdev instances with fbcon using the notifier. - On top of that the modifier chain is also used at runtime by the fbdev subsystem to e.g. control backlights for panels. - The problem is that the notifier puts a mutex locking context between fbdev and fbcon, which mixes up the locking contexts for both the runtime usage and the register time usage to notify fbcon. And at runtime fbcon (through the fbdev core) might call into the notifier from a printk critical section while console_lock is held. - This means console_lock must be an outer lock for the entire fbdev subsystem, which also means it must be acquired when registering a new framebuffer driver as the outermost lock since we might call into fbcon (through the notifier) which would result in a locking inversion if fbcon would acquire the console_lock from its notifier callback (which it needs to register the console). - console_lock can be held anywhere, since printk can be called anywhere, and through the above story, plus drm/kms being an fbdev driver, we pull in a shocking amount of locking hiercharchy underneath the console_lock. Which makes cleaning up printk really hard (not even splitting console_lock into an rwsem is all that useful due to this). There's various ways to address this, but the cleanest would be to make fbcon a compile-time option, where fbdev directly calls the fbcon register functions from register_framebuffer, or dummy static inline versions if fbcon is disabled. Maybe augmented with a runtime knob to disable fbcon, if that's needed (for debugging perhaps). But this could break some users who rely on the magic "loading fbcon.ko enables/disables fbdev framebuffers at runtime" thing, even if that's unlikely. Hence we must be careful: 1. Create a compile-time dependency between fbcon and fbdev in the least minimal way. This is what this patch does. 2. Wait at least 1 year to give possible users time to scream about how we broke their setup. Unlikely, since all distros make fbcon compile-in, and embedded platforms only compile stuff they know they need anyway. But still. 3. Convert the notifier to direct functions calls, with dummy static inlines if fbcon is disabled. We'll still need the fb notifier for the other uses (like backlights), but we can probably move it into the fb core (atm it must be built-into vmlinux). 4. Push console_lock down the call-chain, until it is down in console_register again. 5. Finally start to clean up and rework the printk/console locking. For context of this saga see commit 50e244cc793d511b86adea24972f3a7264cae114 Author: Alan Cox <alan@linux.intel.com> Date: Fri Jan 25 10:28:15 2013 +1000 fb: rework locking to fix lock ordering on takeover plus the pile of commits on top that tried to make this all work without terminally upsetting lockdep. We've uncovered all this when console_lock lockdep annotations where added in commit daee779718a319ff9f83e1ba3339334ac650bb22 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Sep 22 19:52:11 2012 +0200 console: implement lockdep support for console_lock On the patch itself: - Switch CONFIG_FRAMEBUFFER_CONSOLE to be a boolean, using the overall CONFIG_FB tristate to decided whether it should be a module or built-in. - At first I thought I could force the build depency with just a dummy symbol that fbcon.ko exports and fb.ko uses. But that leads to a module depency cycle (it works fine when built-in). Since this tight binding is the entire goal the simplest solution is to move all the fbcon modules (and there's a bunch of optinal source-files which are each modules of their own, for no good reason) into the overall fb.ko core module. That's a bit more than what I would have liked to do in this patch, but oh well. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-17 16:36:11 +0000