summaryrefslogtreecommitdiffstats
path: root/drivers/usb/typec
AgeCommit message (Collapse)Author
2019-10-04usb: typec: ucsi: displayport: Fix for the mode entering routineHeikki Krogerus
Making sure that ucsi_displayport_enter() function does not return an error if the displayport alternate mode has already been entered. It's normal that the firmware (or controller) has already entered the alternate mode by the time the operating system is notified about the device. Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191004100219.71152-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: typec: ucsi: ccg: Remove run_isr flagHeikki Krogerus
The "run_isr" flag is used for preventing the driver from calling the interrupt service routine in its runtime resume callback when the driver is expecting completion to a command, but what that basically does is that it hides the real problem. The real problem is that the controller is allowed to suspend in the middle of command execution. As a more appropriate fix for the problem, using autosuspend delay time that matches UCSI_TIMEOUT_MS (5s). That prevents the controller from suspending while still in the middle of executing a command. This fixes a potential deadlock. Both ccg_read() and ccg_write() are called with the mutex already taken at least from ccg_send_command(). In ccg_read() and ccg_write, the mutex is only acquired so that run_isr flag can be set. Fixes: f0e4cd948b91 ("usb: typec: ucsi: ccg: add runtime pm workaround") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191004100219.71152-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: typec: tcpm: usb: typec: tcpm: Fix a signedness bug in tcpm_fw_get_caps()Dan Carpenter
The "port->typec_caps.data" and "port->typec_caps.type" variables are enums and in this context GCC will treat them as an unsigned int so they can never be less than zero. Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191001120117.GA23528@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03Merge generic_lookup_helpers into usb-nextGreg Kroah-Hartman
The lookup helpers are needed here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: typec: tps6598x: Fix build error without CONFIG_REGMAP_I2CYueHaibing
If CONFIG_REGMAP_I2C is not set, building fails: drivers/usb/typec/tps6598x.o: In function `tps6598x_probe': tps6598x.c:(.text+0x5f0): undefined reference to `__devm_regmap_init_i2c' Select REGMAP_I2C to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190903121026.22148-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-02Merge 5.3-rc7 into usb-nextGreg Kroah-Hartman
We need the usb fixes in here for testing Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-28typec: tcpm: fix a typo in the comparison of pdo_max_voltageColin Ian King
There appears to be a typo in the comparison of pdo_max_voltage[i] with the previous value, currently it is checking against the array pdo_min_voltage rather than pdo_max_voltage. I believe this is a typo. Fix this. Addresses-Coverity: ("Copy-paste error") Fixes: 5007e1b5db73 ("typec: tcpm: Validate source and sink caps") Cc: stable <stable@vger.kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190822135212.10195-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18usb: typec: fusb302: Call fusb302_debugfs_init earlierHans de Goede
tcpm_register_port() will call some of the fusb302 code's callbacks wich in turn will call fusb302_log(). So we need to call fusb302_debugfs_init() before we call tcpm_register_port(). This fixes the following warning, which was caused by the logbuffer_lock not yet being initialized (which is done by fusb302_debugfs_init): DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 1306 at kernel/locking/mutex.c:912 __mutex_lock+0x978/0x9a0 Modules linked in: fusb302(+) tcpm pi3usb30532 typec bq24190_charger snd_soc_sst_cht_bsw_rt5645 mei_hdcp dwc3 intel_rapl_msr udc_core ulpi gpio_keys intel_powerclamp coretemp kvm_intel brcmfmac kvm brcmutil joydev cfg80211 wdat_wdt irqbypass pcspkr intel_cstate extcon_intel_cht_wc i2c_cht_wc(E) snd_intel_sst_acpi snd_intel_sst_core snd_soc_rt5645 snd_soc_sst_atom_hifi2_platform snd_soc_acpi_intel_match snd_soc_rl6231 snd_soc_acpi intel_xhci_usb_role_switch roles hci_uart snd_soc_core btqca mei_txe btrtl processor_thermal_device mei snd_hdmi_lpe_audio lpc_ich snd_compress btbcm intel_rapl_common ac97_bus dwc3_pci snd_pcm_dmaengine intel_soc_dts_iosf btintel snd_seq bluetooth snd_seq_device snd_pcm intel_cht_int33fe_musb snd_timer intel_cht_int33fe_typec intel_hid intel_cht_int33fe_common sparse_keymap snd ecdh_generic goodix rfkill soundcore ecc spi_pxa2xx_platform max17042_battery dw_dmac int3406_thermal dptf_power acpi_pad soc_button_array int3400_thermal int3403_thermal gpd_pocket_fan intel_int0002_vgpio int340x_thermal_zone acpi_thermal_rel dm_crypt mmc_block i915 crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel i2c_algo_bit drm_kms_helper drm video sdhci_acpi sdhci mmc_core pwm_lpss_platform pwm_lpss i2c_dev CPU: 0 PID: 1306 Comm: systemd-udevd Tainted: G E 5.3.0-rc4+ #83 Hardware name: Default string Default string/Default string, BIOS 5.11 06/28/2017 RIP: 0010:__mutex_lock+0x978/0x9a0 Code: c0 0f 84 26 f7 ff ff 44 8b 05 24 25 c8 00 45 85 c0 0f 85 16 f7 ff ff 48 c7 c6 da 55 2f ae 48 c7 c7 98 8c 2d ae e8 a0 f9 5c ff <0f> 0b e9 fc f6 ff ff 4c 89 f0 4d 89 fe 49 89 c7 e9 cf fa ff ff e8 RSP: 0018:ffffb7a8c0523800 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000001 RDI: 0000000000000246 RBP: ffffb7a8c05238c0 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb7a8c0523648 R11: 0000000000000030 R12: 0000000000000000 R13: ffffb7a8c0523990 R14: ffff9bf22f70c028 R15: ffff9bf22f70c360 FS: 00007f39ca234940(0000) GS:ffff9bf237400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1f108481a0 CR3: 0000000271f28000 CR4: 00000000001006f0 Call Trace: ? find_held_lock+0x39/0x90 ? _fusb302_log+0x81/0x1d0 [fusb302] ? vsnprintf+0x3aa/0x4f0 ? _fusb302_log+0x81/0x1d0 [fusb302] _fusb302_log+0x81/0x1d0 [fusb302] ... Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190817184340.64086-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18usb: typec: fusb302: Use usb_debug_root as root for our debugfs entryHans de Goede
Use usb_debug_root as root for our debugfs entry instead of creating our own subdirectory under the debugfs root. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190817184340.64086-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18usb: typec: tcpm: Use usb_debug_root as root for our debugfs entryHans de Goede
Use usb_debug_root as root for our debugfs entry instead of creating our own subdirectory under the debugfs root. Another patch in this series will make the same change to the fusb302 driver, which also uses dev_name() (on the same device) for the debugfs entry name. So we also prefix dev_name() with "tcpm-" here to avoid a name conflict. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190817184340.64086-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: typec: fusb302: Always provide fwnode for the portHeikki Krogerus
By registering a software fwnode for the port when the firmware does not supply one, we can always provide tcpm the connector capabilities by using the common USB connector device properties instead of using tcpc_config platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190814132419.39759-4-heikki.krogerus@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: typec: fusb302: Remove unused propertiesHeikki Krogerus
Removing the deprecated fusb302 specific properties. There are no more platforms using them. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190814132419.39759-2-heikki.krogerus@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-12Merge 5.3-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08USB: typec: ucsi_ccg: convert i2c driver to use dev_groupsGreg Kroah-Hartman
The driver core now supports the option to automatically create and remove any needed sysfs attribute files for a driver when the device is bound/removed from it. Convert the uscsi_ccg code to use that instead of trying to create sysfs files "by hand". Cc: Ajay Gupta <ajayg@nvidia.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190805193636.25560-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-02usb: typec: tcpm: Ignore unsupported/unknown alternate mode requestsGuenter Roeck
TCPM may receive PD messages associated with unknown or unsupported alternate modes. If that happens, calls to typec_match_altmode() will return NULL. The tcpm code does not currently take this into account. This results in crashes. Unable to handle kernel NULL pointer dereference at virtual address 000001f0 pgd = 41dad9a1 [000001f0] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 #6 Hardware name: Atmel SAMA5 Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm] PC is at typec_altmode_attention+0x0/0x14 LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm] ... [<c03fbee8>] (typec_altmode_attention) from [<bf8030fb>] (tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]) [<bf8030fb>] (tcpm_pd_rx_handler [tcpm]) from [<c012082b>] (process_one_work+0x123/0x2a8) [<c012082b>] (process_one_work) from [<c0120a6d>] (worker_thread+0xbd/0x3b0) [<c0120a6d>] (worker_thread) from [<c012431f>] (kthread+0xcf/0xf4) [<c012431f>] (kthread) from [<c01010f9>] (ret_from_fork+0x11/0x38) Ignore PD messages if the associated alternate mode is not supported. Fixes: e9576fe8e605c ("usb: typec: tcpm: Support for Alternate Modes") Cc: stable <stable@vger.kernel.org> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-01usb: typec: ucsi: ccg: Fix uninitilized symbol errorHeikki Krogerus
Fix smatch error: drivers/usb/typec/ucsi/ucsi_ccg.c:975 ccg_fw_update() error: uninitialized symbol 'err'. Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support") Cc: stable@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190801075512.24354-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30drivers: Introduce device lookup variants by fwnodeSuzuki K Poulose
Add a helper to match the firmware node handle of a device and provide wrappers for {bus/class/driver}_find_device() APIs to avoid proliferation of duplicate custom match functions. Cc: "David S. Miller" <davem@davemloft.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-usb@vger.kernel.org Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190723221838.12024-4-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30drivers: Introduce device lookup variants by nameSuzuki K Poulose
Add a helper to match the device name for device lookup. Also reuse this generic exported helper for the existing bus_find_device_by_name(). and add similar variants for driver/class. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-leds@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wpan@vger.kernel.org Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: typec: tcpm: remove tcpm dir if no childrenLi Jun
If config tcpm as module, module unload will not remove tcpm dir, then the next module load will have problem: the rootdir is NULL but tcpm dir is still there, so tcpm_debugfs_init() will create tcpm dir again with failure, fix it by remove the tcpm dir if no children. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190717080646.30421-2-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: typec: tcpm: free log buf memory when remove debug fileLi Jun
The logbuffer memory should be freed when remove debug file. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190717080646.30421-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: typec: tcpm: Add NULL check before dereferencing configGuenter Roeck
When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110, the following crash is seen when writing into the 'preferred_role' sysfs attribute. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = f69149ad [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4 Hardware name: Atmel SAMA5 PC is at tcpm_try_role+0x3a/0x4c [tcpm] LR is at tcpm_try_role+0x15/0x4c [tcpm] pc : [<bf8000e2>] lr : [<bf8000bd>] psr: 60030033 sp : dc1a1e88 ip : c03fb47d fp : 00000000 r10: dc216190 r9 : dc1a1f78 r8 : 00000001 r7 : df4ae044 r6 : dd032e90 r5 : dd1ce340 r4 : df4ae054 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : df4ae044 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 50c53c7d Table: 3efec059 DAC: 00000051 Process bash (pid: 1882, stack limit = 0x6a6d4aa5) Stack: (0xdc1a1e88 to 0xdc1a2000) 1e80: dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000 [<bf8000e2>] (tcpm_try_role [tcpm]) from [<c03fb4a7>] (preferred_role_store+0x2b/0x5c) [<c03fb4a7>] (preferred_role_store) from [<c01e1e03>] (kernfs_fop_write+0xa7/0x150) [<c01e1e03>] (kernfs_fop_write) from [<c0194e8b>] (__vfs_write+0x1f/0x104) [<c0194e8b>] (__vfs_write) from [<c01969f7>] (vfs_write+0x6b/0x104) [<c01969f7>] (vfs_write) from [<c0196b9b>] (ksys_write+0x43/0x94) [<c0196b9b>] (ksys_write) from [<c0101001>] (ret_fast_syscall+0x1/0x62) Since commit 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties"), the 'config' pointer in struct tcpc_dev is optional when registering a Type-C port. Since it is optional, we have to check if it is NULL before dereferencing it. Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Fixes: 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: typec: mux: Switch to use fwnode_property_count_uXX()Andy Shevchenko
Use fwnode_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723194726.69545-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: typec: tcpm: Switch to use fwnode_property_count_uXX()Andy Shevchenko
Use use fwnode_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190723193750.69038-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-15Merge branch 'i2c/for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ...
2019-07-11Merge tag 'usb-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here is the big USB and PHY driver pull request for 5.3-rc1. Lots of stuff here, all of which has been in linux-next for a while with no reported issues. Nothing is earth-shattering, just constant forward progress for more devices supported and cleanups and small fixes: - USB gadget driver updates and fixes - new USB gadget driver for some hardware, followed by a quick revert of those patches as they were not ready to be merged... - PHY driver updates - Lots of new driver additions and cleanups with a few fixes mixed in" * tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) Revert "usb: gadget: storage: Remove warning message" Revert "dt-bindings: add binding for USBSS-DRD controller." Revert "usb:gadget Separated decoding functions from dwc3 driver." Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function." Revert "usb:gadget Simplify usb_decode_get_set_descriptor function." Revert "usb:cdns3 Add Cadence USB3 DRD Driver" Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer." usb :fsl: Change string format for errata property usb: host: Stops USB controller init if PLL fails to lock usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 usb: phy: Workaround for USB erratum-A005728 usb: fsl: Set USB_EN bit to select ULPI phy usb: Handle USB3 remote wakeup for LPM enabled devices correctly drivers/usb/typec/tps6598x.c: fix 4CC cmd write drivers/usb/typec/tps6598x.c: fix portinfo width usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" ...
2019-07-09Merge tag 'devprop-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These add helpers for counting items in a property array and extend the "software nodes" support to be more convenient for representing device properties supplied by drivers and make the intel_cht_int33fe driver use that. Specifics: - Add helpers to count items in a property array (Andy Shevchenko). - Extend "software nodes" support to be more convenient for representing device properties supplied by drivers (Heikki Krogerus). - Add device_find_child_by_name() helper to the driver core (Heikki Krogerus). - Extend device connection code to also look for references provided via fwnode pointers (Heikki Krogerus). - Start to register proper struct device objects for USB Type-C muxes and orientation switches (Heikki Krogerus). - Update the intel_cht_int33fe driver to describe devices in a more general way with the help of "software nodes" (Heikki Krogerus)" * tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Add helpers to count items in an array platform/x86: intel_cht_int33fe: Replacing the old connections with references platform/x86: intel_cht_int33fe: Supply fwnodes for the external dependencies platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector platform/x86: intel_cht_int33fe: Provide software nodes for the devices platform/x86: intel_cht_int33fe: Remove unused fusb302 device property platform/x86: intel_cht_int33fe: Register max17047 in its own function usb: typec: Registering real device entries for the muxes device connection: Find connections also by checking the references device property: Introduce fwnode_find_reference() ACPI / property: Don't limit named child node matching to data nodes driver core: Add helper device_find_child_by_name() software node: Add software_node_get_reference_args() software node: Use kobject name when finding child nodes by name software node: Add support for static node descriptors software node: Simplify software_node_release() function software node: Allow node creation without properties
2019-07-03drivers/usb/typec/tps6598x.c: fix 4CC cmd writeNikolaus Voss
Writing 4CC commands with tps6598x_write_4cc() already has a pointer arg, don't reference it when using as arg to tps6598x_block_write(). Correcting this enforces the constness of the pointer to propagate to tps6598x_block_write(), so add the const qualifier there to avoid the warning. Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03drivers/usb/typec/tps6598x.c: fix portinfo widthNikolaus Voss
Portinfo bit field is 3 bits wide, not 2 bits. This led to a wrong driver configuration for some tps6598x configurations. Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17Merge 5.2-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-12usb: typec: Make sure an alt mode exist before getting its partnerHeikki Krogerus
Adding check to typec_altmode_get_partner() to prevent potential NULL pointer dereference. Reported-by: Vladimir Yerilov <openmindead@gmail.com> Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-08usb: typec: tcpm: fusb302: simplify getting the adapter of a clientWolfram Sang
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-08usb: typec: ucsi: ccg: add runtime pm workaroundAjay Gupta
Cypress USB Type-C CCGx controller firmware version 3.1.10 (which is being used in many NVIDIA GPU cards) has known issue of not triggering interrupt when a USB device is hot plugged to runtime resume the controller. If any GPU card gets latest kernel with runtime pm support but does not get latest fixed firmware then also it should continue to work and therefore a workaround is required to check for any connector change event. The workaround is that i2c bus driver will call pm_request_resume() to runtime resume ucsi_ccg driver. CCG driver will call the ISR for any connector change event for NVIDIA GPU card and only if it has old CCG firmware with the known issue. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-06-08usb: typec: ucsi: ccg: enable runtime pm supportAjay Gupta
The change enables runtime pm support to UCSI CCG driver. Added ucsi_resume() function to enable notification after system reusme. Exported both ucsi_resume() and ucsi_send_command() symbols in ucsi.c for modular build. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-06-03usb: typec: ucsi: ccg: fix memory leak in do_flashGustavo A. R. Silva
In case memory resources for *fw* were successfully allocated, release them before return. Addresses-Coverity-ID: 1445499 ("Resource leak") Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03usb: typec: Registering real device entries for the muxesHeikki Krogerus
Registering real device entries (struct device) for the mode muxes as well as for the orientation switches. The Type-C mux code was deliberately attempting to avoid creation of separate device entries for the orientation switch and the mode switch (alternate modes) because they are not physical devices. They are functions of a single physical multiplexer/demultiplexer switch device. Unfortunately because of the dependency we still have on the underlying mux device driver, we had to put in hacks like the one in the commit 3e3b81965cbf ("usb: typec: mux: Take care of driver module reference counting") to make sure the driver does not disappear from underneath us. Even with those hacks we were still left with a potential NUll pointer dereference scenario, so just creating the device entries, and letting the core take care of the dependencies. No more hacks needed. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-29usb: typec: ucsi: ccg: fix missing unlock on error in ccg_cmd_write_flash_row()Wei Yongjun
Add the missing unlock before return from function ccg_cmd_write_flash_row() in the error handling case. Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25usb: typec: Add driver for NVIDIA Alt ModesAjay Gupta
Latest NVIDIA GPUs support VirtualLink device. Since USBIF has not assigned a Standard ID (SID) for VirtualLink so using NVIDA VID 0x955 as SVID. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25usb: typec: displayport: Export probe and remove functionsAjay Gupta
VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2 pins on the USB Type-C connector. It uses the same messages as DisplayPort, but not the DP SVID. At the time of writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the manufacturers of VirtualLink adapters use their Vendor IDs as the SVID. Since the SVID specific communication is exactly the same as with DisplayPort alternate mode, there is no need to implement separate driver for VirtualLink. We'll handle the current VirtualLink adapters with probe drivers, and once there is SVID assigned for it, we add it to the displayport alt mode driver. To support probing drivers, exporting the probe and remove functions, and also changing the DP_HEADER helper macro to use the SVID of the alternate mode device instead of the DisplayPort alt mode SVID. Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25usb: typec: ucsi: Support for DisplayPort alt modeHeikki Krogerus
This makes it possible to bind a driver to a DisplayPort alt mode adapter devices. The driver attempts to cope with the limitations of UCSI by "emulating" behaviour and attempting to guess things when ever possible in order to satisfy the requirements the standard DisplayPort alt mode driver has. Tested-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25usb: typec: ucsi: Preliminary support for alternate modesHeikki Krogerus
With UCSI the alternate modes, just like everything else related to USB Type-C connectors, are handled in firmware. The operating system can see the status and is allowed to request certain things, for example entering and exiting the modes, but the support for alternate modes is very limited in UCSI. The feature is also optional, which means that even when the platform supports alternate modes, the operating system may not be even made aware of them. UCSI does not support direct VDM reading or writing. Instead, alternate modes can be entered and exited using a single custom command which takes also an optional SVID specific configuration value as parameter. That means every supported alternate mode has to be handled separately in UCSI driver. This commit does not include support for any specific alternate mode. The discovered alternate modes are now registered, but binding a driver to an alternate mode will not be possible until support for that alternate mode is added to the UCSI driver. Tested-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25usb: typec: ucsi: ccg: add firmware flashing supportAjay Gupta
CCGx has two copies of the firmware in addition to the bootloader. If the device is running FW1, FW2 can be updated with the new version. Dual firmware mode allows the CCG device to stay in a PD contract and support USB PD and Type-C functionality while a firmware update is in progress. First we read the currently flashed firmware version of both primary and secondary firmware and then compare it with version of firmware file to determine if flashing is required. Command framework is added to support sending commands to CCGx controller. We wait for response after sending the command and then read the response from RAB_RESPONSE register. Below commands are supported, - ENTER_FLASHING - RESET - PDPORT_ENABLE - JUMP_TO_BOOT - FLASH_ROW_RW - VALIDATE_FW Command specific mutex lock is also added to sync between driver and user threads. PD port number information is added which is required while sending PD_PORT_ENABLE command Signed-off-by: Ajay Gupta <ajayg@nvidia.com> [ heikki: Added ABI documentation. ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25usb: typec: ucsi: ccg: add get_fw_info functionAjay Gupta
Function is to get the details of ccg firmware and device version. It will be useful in debugging and also during firmware update. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: typec: fusb302: Revert "Resolve fixed power role contract setup"Hans de Goede
Some tcpc device-drivers need to explicitly be told to watch for connection events, otherwise the tcpc will not generate any TCPM_CC_EVENTs and devices being plugged into the Type-C port will not be noticed. For dual-role ports tcpm_start_drp_toggling() is used to tell the tcpc to watch for connection events. But for single-role ports we've so far been falling back to just calling tcpm_set_cc(). For some tcpc-s such as the fusb302 this is not enough and no TCPM_CC_EVENT will be generated. Commit ea3b4d5523bc ("usb: typec: fusb302: Resolve fixed power role contract setup") fixed SRPs not working because of this by making the fusb302 driver start connection detection on every tcpm_set_cc() call. It turns out this breaks src->snk power-role swapping because during the swap we first set the Cc pins to Rp, calling set_cc, and then send a PS_RDY message. But the fusb302 cannot send PD messages while its toggling engine is active, so sending the PS_RDY message fails. Struct tcpc_dev now has a new start_srp_connection_detect callback and fusb302.c now implements this. This callback gets called when we the fusb302 needs to start connection detection, fixing fusb302 SRPs not seeing connected devices. This allows us to revert the changes to fusb302's set_cc implementation, making it once again purely setup the Cc-s and matching disconnect detection, fixing src->snk power-role swapping no longer working. Note that since the code was refactored in between, codewise this is not a straight forward revert. Functionality wise this is a straight revert and the original functionality is fully restored. Fixes: ea3b4d5523bc ("usb: typec: fusb302: Resolve fixed power role ...") Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: typec: fusb302: Implement start_toggling for all port-typesHans de Goede
When in single-role port mode, we must start single-role toggling to get an interrupt when a device / cable gets plugged into the port. This commit modifies the fusb302 start_toggling implementation to start toggling for all port-types, so that connection-detection works on single-role ports too. Fixes: ea3b4d5523bc("usb: typec: fusb302: Resolve fixed power role ...") Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPsHans de Goede
Some tcpc device-drivers need to explicitly be told to watch for connection events, otherwise the tcpc will not generate any TCPM_CC_EVENTs and devices being plugged into the Type-C port will not be noticed. For dual-role ports tcpm_start_drp_toggling() is used to tell the tcpc to watch for connection events. Sofar we lack a similar callback to the tcpc for single-role ports. With some tcpc-s such as the fusb302 this means no TCPM_CC_EVENTs will be generated when the port is configured as a single-role port. This commit renames start_drp_toggling to start_toggling and since the device-properties are parsed by the tcpm-core, adds a port_type parameter to the start_toggling callback so that the tcpc_dev driver knows the port-type and can act accordingly when it starts toggling. The new start_toggling callback now always gets called if defined, instead of only being called for DRP ports. To avoid this causing undesirable functional changes all existing start_drp_toggling implementations are not only renamed to start_toggling, but also get a port_type check added and return -EOPNOTSUPP when port_type is not DRP. Fixes: ea3b4d5523bc("usb: typec: fusb302: Resolve fixed power role ...") Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01Merge 5.1-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: typec: fusb302: Make fusb302_irq_work staticYueHaibing
Fix sparse warning: drivers/usb/typec/tcpm/fusb302.c:1454:6: warning: symbol 'fusb302_irq_work' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: typec: wcove: Provide fwnode for the portHeikki Krogerus
By registering a software fwnode for the port, we can supply the connector capabilities to the tcpm using the common USB connector device properties instead of relying on platform data (struct tcpc_config). Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19usb: typec: fusb302: Add __printf attribute to fusb302_log functionHans de Goede
Add __printf attribute to fusb302_log function, so that we get compiler warnings when specifying wrong vararg parameters. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-28 10:24:17 +0000