aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/renesas_usbhs
AgeCommit message (Collapse)Author
2021-07-28usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()Yoshihiro Shimoda
commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream. This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605289e ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUMYoshihiro Shimoda
commit b1d25e6ee57c2605845595b6c61340d734253eb3 upstream. According to the datasheet, this controller has a restriction which "set an endpoint number so that combinations of the DIR bit and the EPNUM bits do not overlap.". However, since the udc core driver is possible to assign a bulk pipe as an interrupt endpoint, an endpoint number may not match the pipe number. After that, when user rebinds another gadget driver, this driver broke the restriction because the driver didn't clear any configuration in usb_ep_disable(). Example: # modprobe g_ncm Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6 # rmmod g_ncm # modprobe g_hid Then, EP3 = pipe 6, EP4 = pipe 7. So, pipe 3 and pipe 6 are set as EP3. So, clear PIPECFG register in usbhs_pipe_free(). Fixes: dfb87b8bfe09 ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()Yoshihiro Shimoda
commit 9917f0e3cdba7b9f1a23f70e3f70b1a106be54a8 upstream. Should clear the pipe running flag in usbhs_pkt_pop(). Otherwise, we cannot use this pipe after dequeue was called while the pipe was running. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Reported-by: Tho Vu <tho.vu.wh@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1612183640-8898-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31usb: renesas_usbhs: add suspend event support in gadget modeVeeraiyan Chidambaram
[ Upstream commit 39abcc84846bbc0538f13c190b6a9c7e36890cd2 ] When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt will be generated and Suspended state bit is set in interrupt status register. Interrupt handler will call driver->suspend(composite_suspend) if suspended state bit is set. composite_suspend will call ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed by user space application via /dev/ep0. To be able to detect host detach, extend the DVSQ_MASK to cover the Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status Register 0 (INTSTS0) register and perform appropriate action in the DVST interrupt handler (usbhsg_irq_dev_state). Without this commit, disconnection of the phone from R-Car-H3 ES2.0 Salvator-X CN9 port is not recognized and reverse role switch does not happen. If phone is connected again it does not enumerate. With this commit, disconnection will be recognized and reverse role switch will happen by a user space application. If phone is connected again it will enumerate properly and will become visible in the output of 'lsusb'. Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1568207756-22325-3-git-send-email-external.veeraiyan.c@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-17usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behaviorYoshihiro Shimoda
commit 4d599cd3a097a85a5c68a2c82b9a48cddf9953ec upstream. According to usb_ep_set_halt()'s description, __usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint has any queue or data. Otherwise, this driver is possible to cause just STALL without sending a short packet data on g_mass_storage driver, and then a few resetting a device happens on a host side during a usb enumaration. Fixes: 2f98382dcdfe ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1569924633-322-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}()Yoshihiro Shimoda
commit 1aae1394294cb71c6aa0bc904a94a7f2f1e75936 upstream. The commit 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area") had added a usbhsg_pipe_disable() calling into __usbhsg_ep_set_halt_wedge() accidentally. But, this driver should not call the usbhsg_pipe_disable() because the function discards all queues. So, this patch removes it. Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1569924633-322-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14usb: renesas_usbhs: add a workaround for a race condition of workqueueYoshihiro Shimoda
commit b2357839c56ab7d06bcd4e866ebc2d0e2b7997f3 upstream. The old commit 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work(). To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However, the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()). For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue. This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen. Fixes: ab330cf3888d ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: renesas_usbhs: add support for RZ/G2EFabrizio Castro
[ Upstream commit 1d6e81a288e28d8d0e38e0501a324216f79bba35 ] HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the one found in R-Car E3 (a.k.a. r8a77990), as it needs to release the PLL reset by the UGCTRL register like R-Car E3, therefore add r8a774c0 support in a similar fashion to what was done for the r8a77990. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-07-30usb: renesas_usbhs: Kconfig: convert to SPDX identifiersKuninori Morimoto
By default all files without license information are under the default license of the kernel, which is GPL version 2. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02USB: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-22USB: renesas_usbhs: drop unused legacy-phy supportJohan Hovold
Drop support for legacy phys for rcar2 which hasn't been used with a mainline kernel since commit 9080b8dc761a ("ARM: OMAP2+: Remove legacy usb-host.c platform init code"). Specifically, since that commit usb_get_phy_dev() have always returned -ENODEV and consequently this code has not been used. Note that the legacy-phy API is still being used in gadget mode to bind the peripheral controller. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-15usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx pathYoshihiro Shimoda
This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09usb: renesas_usbhs: Add support for RZ/A1Chris Brandt
This patch adds the capability to support RZ/A1 SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14usb: renesas_usbhs: add extcon notifier to set mode for non-otg channelYoshihiro Shimoda
This patch adds extcon notifier callback to set the mode of host/peripheral by using extcon state (e.g phy-rcar-gen3-usb2) for non-otg channel (e.g. R-Car D3). [Fengguang Wu: fixed sparse warning] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> usb: renesas_usbhs: usbhs_rcar3_notifier() can be static Fixes: 3a7cce26122e ("usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-12-13usb: renesas_usbhs: set the mode by using extcon state for non-otg channelYoshihiro Shimoda
The usbhs_rcar3_power_and_pll_ctrl() will be used by non-otg channel (e.g. R-Car D3) and the previous code has hardcoded as peripheral mode. So, this patch sets the mode by using extcon state. If the channel doesn't get any extcon devices, this driver's behavior is the same as before. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-12-13usb: renesas_usbhs: Add a function to write the UGCTRL2 registerYoshihiro Shimoda
To cleanup the code, this patch adds a function to write the UGCTRL2 register. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-12-12usb: renesas_usbhs: use PIPEnCLR.ACLRM instead of {C,Dn}FIFOCTR.BCLR in ↵Yoshihiro Shimoda
usbhs_pkt_pop() This patch uses usbhs_pipe_clear_without_sequence() instead of usbhsf_fifo_clear() because usbhsf_fifo_clear() may not clear the pipe buffer completely. This patch also changes the clearing condition from DMA only to both DMA and PIO. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-12-12usb: renesas_usbhs: add usbhs_pipe_clear_without_sequence() functionYoshihiro Shimoda
This patch adds usbhs_pipe_clear_without_sequence() function. The controller has the pipe buffer and the PIPEnCTR.ACLRM can clear it completely. But, it's also clear the data sequence. So, the driver needs to get the sequence before. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-12-12usb: renesas_usbhs: remove redundant polling in usbhsf_fifo_barrier()Yoshihiro Shimoda
The datasheet doesn't mention that needs to poll of FRDY is set or not. So, this patch removes such handling in the usbhsf_fifo_barrier(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-13Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-07USB: renesas_usbhs: rcar?.h: add SPDX tagsGreg Kroah-Hartman
These files somehow never got an SPDX tag added to them, maybe due to the small size. So provide the default identifier of the whole project: SPDX-License-Identifier: GPL-2.0 The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. Cc: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: renesas_usbhs: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Rob Herring <robh@kernel.org> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Johan Hovold <johan@kernel.org> Cc: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Cc: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07renesas_usbhs: use renesas_usbhs_get_info()Kuninori Morimoto
We already have renesas_usbhs_get_info() macro. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24Merge tag 'usb-for-v4.15' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.15 merge window Not much going on this time around. With only 51 non-merge commits, this was one of the smallest pull requests from the Gadget tree. Most of the changes are in the mtu3 driver which added support for 36-bit DMA, support for USB 3.1 and support for dual-role (along with some non-critical fixes). The dwc2 driver got a few improvements to how we handle gadget state tracking and also added support for STM32F7xx devices. Other than that, we just some minor non-critical fixes and improvements all over the place.
2017-10-19usb: renesas_usbhs: Use of_device_get_match_data() helperGeert Uytterhoeven
Use the of_device_get_match_data() helper instead of open coding. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: renesas_usbhs: add support for R-Car D3Yoshihiro Shimoda
This patch adds support for R-Car D3. This SoC needs to release the PLL reset by the UGCTRL register. So, since this is not the same as other R-Car Gen3 SoCs, this patch adds a new type as "USBHS_TYPE_RCAR_GEN3_WITH_PLL". Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: renesas_usbhs: unify Gen2/3 pipe_config settingYoshihiro Shimoda
This patch unifies the Gen2 and Gen3 pipe_config setting on usbhs_parse_dt(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packetKazuya Mizuguchi
The DREQE bit of the DnFIFOSEL should be set to 1 after the DE bit of USB-DMAC on R-Car SoCs is set to 1 after the USB-DMAC received a zero-length packet. Otherwise, a transfer completion interruption of USB-DMAC doesn't happen. Even if the driver changes the sequence, normal operations (transmit/receive without zero-length packet) will not cause any side-effects. So, this patch fixes the sequence anyway. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [shimoda: revise the commit log] Fixes: e73a9891b3a1 ("usb: renesas_usbhs: add DMAEngine support") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-09-28usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX directionYoshihiro Shimoda
This patch fixes an issue that the usbhsf_fifo_clear() is possible to cause 10 msec delay if the pipe is RX direction and empty because the FRDY bit will never be set to 1 in such case. Fixes: e8d548d54968 ("usb: renesas_usbhs: fifo became independent from pipe.") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-09-28usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipeYoshihiro Shimoda
This patch fixes an issue that the driver sets the BCLR bit of {C,Dn}FIFOCTR register to 1 even when it's non-DCP pipe and the FRDY bit of {C,Dn}FIFOCTR register is set to 1. Fixes: e8d548d54968 ("usb: renesas_usbhs: fifo became independent from pipe.") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-22Merge tag 'usb-for-v4.14' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.14 merge window Not a big pull request this time around. Only 49 non-merge commits. This pull request is, however, all over the place. Most of the changes are in the bdc driver adding support for USB Phy layer and PM. Renesas adds support for R-Car H3 ES2.0 and R-Car M3-W SoCs. Also here is PM_RUNTIME support for dwc3-keystone. UDC Core got a DMA unmap fix to make sure we only unmap requests that were, indeed, mapped. Other than these, we have a lot of cleanups, many of them adding 'const' to several places.
2017-08-15usb: renesas_usbhs: gadget: fix spin_lock_init() for &uep->lockYoshihiro Shimoda
This patch fixes an issue that the spin_lock_init() is not called for almost all pipes. Otherwise, the lockdep output the following message when we connect a usb cable using g_ncm: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Fixes: b8b9c974afee ("usb: renesas_usbhs: gadget: disable all eps when the driver stops") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-15usb: renesas_usbhs: gadget: make usb_ep_ops constBhumika Goyal
Make the structure const as it is only stored in the ops field of a usb_ep structure, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-14Merge 4.13-rc5 into usb-nextGreg Kroah-Hartman
This gets the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-03usb: renesas_usbhs: gadget: fix unused-but-set-variable warningYoshihiro Shimoda
The commit b8b9c974afee ("usb: renesas_usbhs: gadget: disable all eps when the driver stops") causes the unused-but-set-variable warning. But, if the usbhsg_ep_disable() will return non-zero value, udc/core.c doesn't clear the ep->enabled flag. So, this driver should not return non-zero value, if the pipe is zero because this means the pipe is already disabled. Otherwise, the ep->enabled flag is never cleared when the usbhsg_ep_disable() is called by the renesas_usbhs driver first. Fixes: b8b9c974afee ("usb: renesas_usbhs: gadget: disable all eps when the driver stops") Fixes: 11432050f070 ("usb: renesas_usbhs: gadget: fix NULL pointer dereference in ep_disable()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-03usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3Yoshihiro Shimoda
The latest HW manual (Rev.0.55) shows us this UGCTRL2.VBUSSEL bit. If the bit sets to 1, the VBUS drive is controlled by phy related registers (called "UCOM Registers" on the manual). Since R-Car Gen3 environment will control VBUS by phy-rcar-gen3-usb2 driver, the UGCTRL2.VBUSSEL bit should be set to 1. So, this patch fixes the register's value. Otherwise, even if the ID pin indicates to peripheral, the R-Car will output USBn_PWEN to 1 when a host driver is running. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control" Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-30usb: renesas_usbhs: constify hc_driver structuresJulia Lawall
The hc_driver structure is only passed as the first argument to usb_create_hcd, which is declared as const. Thus the hc_driver structure itself can be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-23Merge 4.13-rc2 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-19usb: renesas_usbhs: gadget: disable all eps when the driver stopsYoshihiro Shimoda
A gadget driver will not disable eps immediately when ->disconnect() is called. But, since this driver assumes all eps stop after the ->disconnect(), unexpected behavior happens (especially in system suspend). So, this patch disables all eps in usbhsg_try_stop(). After disabling eps by renesas_usbhs driver, since some functions will be called by both a gadget and renesas_usbhs driver, renesas_usbhs driver should protect uep->pipe. To protect uep->pipe easily, this patch adds a new lock in struct usbhsg_uep. Fixes: 2f98382dc ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-19usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRLYoshihiro Shimoda
This patch fixes an issue that some registers may be not initialized after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise, if a cable is not connected, the driver will not enable INTENB0.VBSE after resume. And then, the driver cannot detect the VBUS. Fixes: ca8a282a5373 ("usb: gadget: renesas_usbhs: add suspend/resume support") Cc: <stable@vger.kernel.org> # v3.2+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-17usb: renesas_usbhs: make array type_array static constColin Ian King
Array type_array can be made static const rather than being populated on the stack. Makes the object code smaller: Before: text data bss dec hex filename 8087 1496 0 9583 256f drivers/usb/renesas_usbhs/pipe.o After: text data bss dec hex filename 7883 1584 0 9467 24fb drivers/usb/renesas_usbhs/pipe.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-24usb: renesas_usbhs: Replace the deprecated extcon APIChanwoo Choi
This patch replaces the deprecated extcon API as following: - extcon_get_cable_state_() -> extcon_get_state() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: renesas_usbhs: mod_host: fix typo: "connecte" -> "connected"Colin Ian King
trivial fix to typo in dev_dbg message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: renesas_usbhs: cleanup with list_first_entry_or_null()Masahiro Yamada
The combo of list_empty() check and return list_first_entry() can be replaced with list_first_entry_or_null(). Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-24usb: renesas_usbhs: add wait after initialization for R-Car Gen3Yoshihiro Shimoda
Since the controller on R-Car Gen3 doesn't have any status registers to detect initialization (LPSTS.SUSPM = 1) and the initialization needs up to 45 usec, this patch adds wait after the initialization. Otherwise, writing other registers (e.g. INTENB0) will fail. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control") Cc: <stable@vger.kernel.org> # v4.6+ Cc: <balbi@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-14Merge tag 'usb-for-v4.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.9 merge window This time around we have 92 non-merge commits. Most of the changes are in drivers/usb/gadget (40.3%) with drivers/usb/gadget/function being the most active directory (27.2%). As for UDC drivers, only dwc3 (26.5%) and dwc2 (12.7%) have really been active. The most important changes for dwc3 are better support for scatterlist and, again, throughput improvements. While on dwc2 got some minor stability fixes related to soft reset and FIFO usage. Felipe Tonello has done some good work fixing up our f_midi gadget and Tal Shorer has implemented a nice API change for our ULPI bus. Apart from these, we have our usual set of non-critical fixes, spelling fixes, build warning fixes, etc.
2016-09-12Merge 4.8-rc6 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 22:49:27 +0000