| Age | Commit message (Collapse) | Author |
|---|
|
commit b69ec50b3e55c4b2a85c8bc46763eaf33060584 upstream
For DEV_VER_V3 version there exist race condition between clearing
ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit.
Setting EP_CMD_DRDY will be ignored by controller when
EP_STS_TRBERR is set. So, between these two instructions we have
a small time gap in which the EP_STS_TRBERR can be set. In such case
the transfer will not start after setting doorbell.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org> # 5.4.x
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit aa35772f61752d4c636d46be51a4f7ca6c029ee6 upstream.
For delayed status phase, the usb_gadget->state was set
to USB_STATE_ADDRESS and it has never been updated to
USB_STATE_CONFIGURED.
Patch updates the gadget state to correct USB_STATE_CONFIGURED.
As a result of this bug the controller was not able to enter to
Test Mode while using MSC function.
Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210623070247.46151-1-pawell@gli-login.cadence.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 upstream.
ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
as TDL source for IN endpoints. To fix it, TDL_CHK is only
enabled for OUT endpoints.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Link: https://lore.kernel.org/r/1621263912-13175-1-git-send-email-sparmar@cadence.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e5b913496099527abe46e175e5e2c844367bded0 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5fca3f062879f8e5214c56f3e3e2be6727900f5d ]
The code:
trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size)
| TRB_LEN(length));
TRB_BURST_LEN(priv_ep->trb_burst_size) may be overflow for int 32 if
priv_ep->trb_burst_size is equal or larger than 0x80;
Below is the Coverity warning:
sign_extension: Suspicious implicit sign extension: priv_ep->trb_burst_size
with type u8 (8 bits, unsigned) is promoted in priv_ep->trb_burst_size << 24
to type int (32 bits, signed), then sign-extended to type unsigned long
(64 bits, unsigned). If priv_ep->trb_burst_size << 24 is greater than 0x7FFFFFFF,
the upper bits of the result will all be 1.
To fix it, it needs to add an explicit cast to unsigned int type for ((p) << 24).
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 98df91f8840cf750a0bc7c4c5d6b6085bac945b3 upstream.
The interrupt may occur during the gadget deletion, it fixes the
below oops.
[ 2394.974604] configfs-gadget gadget: suspend
[ 2395.042578] configfs-gadget 5b130000.usb: unregistering UDC driver [g1]
[ 2395.382562] irq 229: nobody cared (try booting with the "irqpoll" option)
[ 2395.389362] CPU: 0 PID: 301 Comm: kworker/u12:6 Not tainted 5.8.0-rc3-next-20200703-00060-g2f13b83cbf30-dirty #456
[ 2395.399712] Hardware name: Freescale i.MX8QM MEK (DT)
[ 2395.404782] Workqueue: 2-0051 tcpm_state_machine_work
[ 2395.409832] Call trace:
[ 2395.412289] dump_backtrace+0x0/0x1d0
[ 2395.415950] show_stack+0x1c/0x28
[ 2395.419271] dump_stack+0xbc/0x118
[ 2395.422678] __report_bad_irq+0x50/0xe0
[ 2395.426513] note_interrupt+0x2cc/0x38c
[ 2395.430355] handle_irq_event_percpu+0x88/0x90
[ 2395.434800] handle_irq_event+0x4c/0xe8
[ 2395.438640] handle_fasteoi_irq+0xbc/0x168
[ 2395.442740] generic_handle_irq+0x34/0x48
[ 2395.446752] __handle_domain_irq+0x68/0xc0
[ 2395.450846] gic_handle_irq+0x64/0x150
[ 2395.454596] el1_irq+0xb8/0x180
[ 2395.457733] __do_softirq+0xac/0x3b8
[ 2395.461310] irq_exit+0xc0/0xe0
[ 2395.464448] __handle_domain_irq+0x6c/0xc0
[ 2395.468540] gic_handle_irq+0x64/0x150
[ 2395.472295] el1_irq+0xb8/0x180
[ 2395.475436] _raw_spin_unlock_irqrestore+0x14/0x48
[ 2395.480232] usb_gadget_disconnect+0x120/0x140
[ 2395.484678] usb_gadget_remove_driver+0xb4/0xd0
[ 2395.489208] usb_del_gadget+0x6c/0xc8
[ 2395.492872] cdns3_gadget_exit+0x5c/0x120
[ 2395.496882] cdns3_role_stop+0x60/0x90
[ 2395.500634] cdns3_role_set+0x64/0xd8
[ 2395.504301] usb_role_switch_set_role.part.0+0x3c/0x90
[ 2395.509444] usb_role_switch_set_role+0x20/0x30
[ 2395.513978] tcpm_mux_set+0x60/0xf8
[ 2395.517470] tcpm_reset_port+0xa4/0xf0
[ 2395.521222] tcpm_detach.part.0+0x44/0x50
[ 2395.525227] tcpm_state_machine_work+0x8b0/0x2360
[ 2395.529932] process_one_work+0x1c8/0x470
[ 2395.533939] worker_thread+0x50/0x420
[ 2395.537603] kthread+0x148/0x168
[ 2395.540830] ret_from_fork+0x10/0x18
[ 2395.544399] handlers:
[ 2395.546671] [<000000008dea28da>] cdns3_wakeup_irq
[ 2395.551375] [<000000009fee5c61>] cdns3_drd_irq threaded [<000000005148eaec>] cdns3_drd_thread_irq
[ 2395.560255] Disabling IRQ #229
[ 2395.563454] configfs-gadget gadget: unbind function 'Mass Storage Function'/000000000132f835
[ 2395.563657] configfs-gadget gadget: unbind
[ 2395.563917] udc 5b130000.usb: releasing '5b130000.usb'
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 95f5acfc4f58f01a22b66d8c9c0ffb72aa96271c ]
During the endpoint dequeue operation, it changes dequeued TRB as link
TRB, when the endpoint is disabled and re-enabled, the DMA fetches the
TRB before the link TRB, after it handles current TRB, the DMA pointer
will advance to the TRB after link TRB, but enqueue and dequene
variables don't know it due to no hardware interrupt at the time, when
the next TRB is added to link TRB position, the DMA will not handle
this TRB due to its pointer is already at the next TRB. See the trace
log like below:
file-storage-675 [001] d..1 86.585657: usb_ep_queue: ep0: req 00000000df9b3a4f length 0/0 sgs 0/0 stream 0 zsI status 0 --> 0
file-storage-675 [001] d..1 86.585663: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
file-storage-675 [001] d..1 86.585671: cdns3_prepare_trb: ep1out: trb 000000007f770303, dma buf: 0xbd195800, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
file-storage-675 [001] d..1 86.585676: cdns3_ring:
Ring contents for ep1out:
Ring deq index: 0, trb: 000000007f770303 (virt), 0xc4003000 (dma)
Ring enq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma)
free trbs: 38, CCS=1, PCS=1
@0x00000000c4003000 bd195800 80020400 00000425
@0x00000000c400300c c4003018 80020400 00001811
@0x00000000c4003018 bcfcc000 0000001f 00000426
@0x00000000c4003024 bcfce800 0000001f 00000426
...
irq/144-5b13000-698 [000] d... 87.619286: usb_gadget_giveback_request: ep1in: req 0000000031b832eb length 13/13 sgs 0/0 stream 0 zsI status 0 --> 0
file-storage-675 [001] d..1 87.619287: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr 0x80020400c400300c], flags:0 SID: 0
file-storage-675 [001] d..1 87.619294: cdns3_prepare_trb: ep1out: trb 0000000049c1ba21, dma buf: 0xbd198000, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
file-storage-675 [001] d..1 87.619297: cdns3_ring:
Ring contents for ep1out:
Ring deq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma)
Ring enq index: 2, trb: 0000000059b34b67 (virt), 0xc4003018 (dma)
free trbs: 38, CCS=1, PCS=1
@0x00000000c4003000 bd195800 0000001f 00000427
@0x00000000c400300c bd198000 80020400 00000425
@0x00000000c4003018 bcfcc000 0000001f 00000426
@0x00000000c4003024 bcfce800 0000001f 00000426
...
file-storage-675 [001] d..1 87.619305: cdns3_doorbell_epx: ep1out, ep_trbaddr c4003018
file-storage-675 [001] .... 87.619308: usb_ep_queue: ep1out: req 000000002ebce364 length 0/1024 sgs 0/0 stream 0 zsI status -115 --> 0
irq/144-5b13000-698 [000] d..1 87.619315: cdns3_epx_irq: IRQ for ep1out: 01000c80 TRBERR , ep_traddr: c4003018 ep_last_sid: 00000000 use_streams: 0
irq/144-5b13000-698 [000] d..1 87.619395: cdns3_usb_irq: IRQ 00000008 = Hot Reset
Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65b7cf48c211ece5e2560a334eb9608e48775a8f ]
It is found by sparse.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f81d45c79271def8a9b90447b04b9c6323291f9 ]
It is found by sparse.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2587a029fa2a877d0a8dda955ef1b24c94b4bd0e upstream.
The other thread may access other endpoints when the cdns3_check_new_setup
is handling, add spinlock to protect it.
Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b51e1cf64f93acebb6d8afbacd648a6ecefc39b4 upstream.
The 'tmode' is ctrl->wIndex, changing it as the real test
mode value for register assignment.
Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba3a80fe0fb67d8790f62b7bc60df97406d89871 upstream.
It should use the correct direction value from register, not depends
on previous software setting. It fixed the EP number wrong issue at
trace when the TRBERR interrupt occurs for EP0IN.
When the EP0IN IOC has finished, software prepares the setup packet
request, the expected direction is OUT, but at that time, the TRBERR
for EP0IN may occur since it is DMULT mode, the DMA does not stop
until TRBERR has met.
Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95cd7dc47abd71d1a0c9c43594ff2fa32552f46c upstream.
And there are no multiple TRBs on EP0 and WA1 workaround,
so it doesn't need to change TRB for EP0. It fixes below oops.
configfs-gadget gadget: high-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
Unable to handle kernel read from unreadable memory at virtual address 0000000000000008
Mem abort info:
android_work: sent uevent USB_STATE=DISCONNECTED
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO)
pc : cdns3_gadget_ep_dequeue+0x1d4/0x270
lr : cdns3_gadget_ep_dequeue+0x48/0x270
sp : ffff800012763ba0
x29: ffff800012763ba0 x28: ffff00082c653c00
x27: 0000000000000000 x26: ffff000068fa7b00
x25: ffff0000699b2000 x24: ffff00082c6ac000
x23: ffff000834f0a480 x22: ffff000834e87b9c
x21: 0000000000000000 x20: ffff000834e87800
x19: ffff000069eddc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fbe8 x10: 0000000000000001
x9 : ffff800012101558 x8 : 0000000000000001
x7 : 0000000000000006 x6 : ffff000835d9c668
x5 : ffff000834f0a4c8 x4 : 0000000096000000
x3 : 0000000000001810 x2 : 0000000000000000
x1 : ffff800024bd001c x0 : 0000000000000001
Call trace:
cdns3_gadget_ep_dequeue+0x1d4/0x270
usb_ep_dequeue+0x34/0xf8
composite_dev_cleanup+0x154/0x170
configfs_composite_unbind+0x6c/0xa8
usb_gadget_remove_driver+0x44/0x70
usb_gadget_unregister_driver+0x74/0xe0
unregister_gadget+0x28/0x58
gadget_dev_desc_UDC_store+0x80/0x110
configfs_write_file+0x1e0/0x2a0
__vfs_write+0x48/0x90
vfs_write+0xe4/0x1c8
ksys_write+0x78/0x100
__arm64_sys_write+0x24/0x30
el0_svc_common.constprop.0+0x74/0x168
el0_svc_handler+0x34/0xa0
el0_svc+0x8/0xc
Code: 52830203 b9407660 f94042e4 11000400 (b9400841)
---[ end trace 1574516e4c1772ca ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..
Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bf2dd65135a2d7fe202f7c10d65b51bcf645ac6 upstream.
If there are TRBs pending during reset endpoint operation, the
DMA will advance after reset operation, but it isn't expected,
since the data is not yet available (For OUT, the data is not
yet available). After the data is ready, there won't be any
interrupt since the EP_TRADDR already points to next TRB entry
and doorbell is not set.
To fix it, it toggles cycle bit before reset operation, and restores
it after reset, it could avoid unexpected DMA advance due to
cycle bit is for software during the endpoint reset operation.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-3-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a7c47fb7285b23ca259c888016513d5566fa9e8 upstream.
It has marked the dequeue trb as link trb, but its next segment
pointer is still itself, it causes the transfer can't go on. Fix
it by set its pointer as the trb address for the next request.
Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-2-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af58e1fca9840192f14b6f03c59595d64bff9127 upstream.
Both drd and gadget interrupt handler use the struct cdns3 pointer as
dev_id, it causes devm_free_irq at cdns3_gadget_exit doesn't free
gadget's interrupt handler, it freed drd's handler. So, when the
host interrupt occurs, the gadget's interrupt hanlder is still
called, and causes below oops. To fix it, we use gadget's private
data priv_dev as interrupt dev_id for gadget.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000380
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000971d79000
[0000000000000380] pgd=0000000971d6f003, pud=0000000971d6e003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: mxc_jpeg_encdec crct10dif_ce fsl_imx8_ddr_perf
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-03486-g69f4e7d9c54a-dirty #254
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : cdns3_device_irq_handler+0x1c/0xb8
lr : __handle_irq_event_percpu+0x78/0x2c0
sp : ffff800010003e30
x29: ffff800010003e30 x28: ffff8000129bb000
x27: ffff8000126e9000 x26: ffff0008f61b5600
x25: ffff800011fe1018 x24: ffff8000126ea120
x23: ffff800010003f04 x22: 0000000000000000
x21: 0000000000000093 x20: ffff0008f61b5600
x19: ffff0008f5061a80 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 003d090000000000
x13: 00003d0900000000 x12: 0000000000000000
x11: 00003d0900000000 x10: 0000000000000040
x9 : ffff800012708cb8 x8 : ffff800012708cb0
x7 : ffff0008f7c7a9d0 x6 : 0000000000000000
x5 : ffff0008f7c7a910 x4 : ffff8008ed359000
x3 : ffff800010003f40 x2 : 0000000000000000
x1 : ffff0008f5061a80 x0 : ffff800010161a60
Call trace:
cdns3_device_irq_handler+0x1c/0xb8
__handle_irq_event_percpu+0x78/0x2c0
handle_irq_event_percpu+0x40/0x98
handle_irq_event+0x4c/0xd0
handle_fasteoi_irq+0xbc/0x168
generic_handle_irq+0x34/0x50
__handle_domain_irq+0x6c/0xc0
gic_handle_irq+0xd4/0x174
el1_irq+0xb8/0x180
arch_cpu_idle+0x3c/0x230
default_idle_call+0x38/0x40
do_idle+0x20c/0x298
cpu_startup_entry+0x28/0x48
rest_init+0xdc/0xe8
arch_call_rest_init+0x14/0x1c
start_kernel+0x48c/0x4b8
Code: aa0103f3 aa1e03e0 d503201f f9409662 (f941c040)
---[ end trace 091dcf4dee011b0e ]---
Kernel panic - not syncing: Fatal exception in interrupt
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,2100600c
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: <stable@vger.kernel.org> #v5.4
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1577437804-18146-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Take into account gadget driver's speed limit when programming
controller speed.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20191030121607.21739-1-rogerq@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
EP_CLAIMED flag is used to track the claimed endpoints. While unloading the
module, Reset EP_CLAIMED flag for all enabled endpoints. So that it can be
reused.
Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20191029122441.5816-1-sparmar@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB gadget core is supposed to manage pullups
of the controller. Don't manage pullups from within
the controller driver. Otherwise, function drivers
are not able to keep the controller disconnected from
the bus till they are ready. (e.g. g_webcam)
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The cdns3_host_init() function is declared in host-export.h
but host.c does not include it. Add the include to have
the declaration present (and remove the declaration of
cdns3_host_exit which is now static).
Fixes the following sparse warning:
drivers/usb/cdns3/host.c:58:5: warning: symbol 'cdns3_host_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
USB_DR_MODE_UNKNOWN should be treated as error as it is done in
cdns3_drd_update_mode().
Fixes: 02ffc26df96b ("usb: cdns3: fix cdns3_core_init_role()")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20191017075801.8734-1-rogerq@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dequeuing implementation in cdns3_gadget_ep_dequeue gets first request from
deferred_req_list and changed TRB associated with it to LINK TRB.
This approach is incorrect because deferred_req_list contains requests
that have not been placed on hardware RING. In this case driver should
just giveback this request to gadget driver.
The patch implements new approach that first checks where dequeuing
request is located and only when it's on Transfer Ring then changes TRB
associated with it to LINK TRB.
During processing completed transfers such LINK TRB will be ignored.
Reported-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1570958420-22196-1-git-send-email-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch restores the correct DMA mask after switching back to device
mode.
The issue occurred because Device part of controller use 32 bits DMA and
Host side use 64 bits DMA. During loading XHCI driver the DMA mask
used by driver is overwritten by XHCI driver so it must be restored
to 32 bits.
Reported-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/1570449803-15299-1-git-send-email-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At startup we should trigger the HW state machine
only if it is OTG mode. Otherwise we should just
start the respective role.
Initialize idle role by default. If we don't do this then
cdns3_idle_role_stop() is not called when switching to
host/device role and so lane switch mechanism
doesn't work. This results to super-speed device not working
in one orientation if it was plugged before driver probe.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20191007121601.25996-2-rogerq@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to disable USB3 PHY for full-speed mode else
gadget mode is broken.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20191007121601.25996-3-rogerq@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch fixes issue with Halt Endnpoint Test observed during using g_zero
driver as DUT. Bug occurred only on some testing board.
Endpoint can defer transition to Halted state if endpoint has pending
requests.
Patch add additional condition that allows to return correct endpoint
status during Get Endpoint Status request even if the halting endpoint
is in progress.
Reported-by: Rahul Kumar <kurahul@cadence.com>
Signed-off-by: Rahul Kumar <kurahul@cadence.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Tested-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/1570430355-26118-1-git-send-email-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch fix issue in cdns3_ep0_feature_handle_device function.
The function usleep_range can't be used there because this function is
called with locks held and IRQs disabled in
cdns3_device_thread_irq_handler().
To resolve this issue patch replaces usleep_range with mdelay.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1569484721-4424-1-git-send-email-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can't use "wrap" after it has been freed.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190904100102.GB7007@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20190903153625.85691-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in a dev_dbg message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190903120710.30128-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the check on a non-zero return code in ret is false because
ret has been initialized to zero. I believe that ret should be assigned
to the return from the call to readl_poll_timeout_atomic before the
check on ret. Since ret is being re-assinged the original initialization
of ret to zero can be removed.
Addresses-Coverity: ("'Constant' variable guards dead code")
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190902145035.18200-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the case where an allocation fails for priv_ep ret is
assigned -ENOMEM and the code exits via the exit path 'err'.
The exit path returns -ENOMEM without using variable ret, so
the assingment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190902184334.27406-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/usb/cdns3/gadget.c: In function '__cdns3_gadget_init':
drivers/usb/cdns3/gadget.c:2665:23: warning:
variable 'priv_dev' set but not used [-Wunused-but-set-variable]
drivers/usb/cdns3/gadget.c: In function cdns3_start_all_request:
drivers/usb/cdns3/gadget.c:357:24: warning:
variable priv_req set but not used [-Wunused-but-set-variable]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190903120445.22204-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers/usb/cdns3/ep0.c: In function cdns3_ep0_feature_handle_device:
drivers/usb/cdns3/ep0.c:290:6: warning: variable wIndex set but not used [-Wunused-but-set-variable]
drivers/usb/cdns3/ep0.c:289:6: warning: variable wValue set but not used [-Wunused-but-set-variable]
wIndex is never used, so remove it.
wValue should be use in the switch statement.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190903120615.19504-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Controller for OUT endpoints has shared on-chip buffers for all incoming
packets, including ep0out. It's FIFO buffer, so packets must be handled
by DMA in correct order. If the first packet in the buffer will not be
handled, then the following packets directed for other endpoints and
functions will be blocked.
Additionally the packets directed to one endpoint can block entire on-chip
buffers. In this case transfer to other endpoints also will blocked.
To resolve this issue after raising the descriptor missing interrupt
driver prepares internal usb_request object and use it to arm DMA
transfer.
The problematic situation was observed in case when endpoint has
been enabled but no usb_request were queued. Driver try detects
such endpoints and will use this workaround only for these endpoint.
Driver use limited number of buffer. This number can be set by macro
CDNS_WA2_NUM_BUFFERS.
Such blocking situation was observed on ACM gadget. For this function
host send OUT data packet but ACM function is not prepared for
this packet. It's cause that buffer placed in on chip memory block
transfer to other endpoints.
Issue has been fixed for DEV_VER_V2 version of controller.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch introduce new Cadence USBSS DRD driver to Linux kernel.
The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiated as Dual-Role Device (DRD), Peripheral Only and
Host Only (XHCI)configurations.
The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.
The host side of USBSS-DRD controller is compliant with XHCI
specification, so it works with standard XHCI Linux driver.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
Pawel Laszczak
Sanket Parmar
Dinghao Liu
Peter Chen
Sasha Levin
Roger Quadros
Ben Dooks (Codethink)
Dan Carpenter
Wei Yongjun
Colin Ian King
YueHaibing